USB 3 G modem disconnects after 10-15 minutes.

Similar Questions

• Satellite S50-B-131 disconnects after a few minutes

  Today when I finished my recording and after only 2 minutes my S50 has disconnected itself... I restarted again, and then again after 2/3 minutes and then... I tried to use only the batery to check if the power supply is a problem... Same situation... However, whenever I have started on the laptop set to normal and fast before disconnect you again. Clues?

  I have to finish the work and its only in the hard drive, I was about to copy it into the external memory... but not the time until it discoinnected...

  I had suggestions appreciatte

  Thank you!!

  Carlos

  With "disconnect" you probably mean "unplug", no?

  On this virtual path, it is not easy to say why this is happening. What kind of job do you have?
  I mean if the laptop turns off without apparent reason, it could be due to overheating and critical temperature of material.

  Can you please do a little test? Start your laptop and enter the BIOS settings. After doing this let him for a while and let us know if laptop will stay on or switches OFF again.

• Wireless disconnects after a few minutes, restart result BSOD

  Hello, all of a sudden my wireless connection keeps disconnecting after 5 minutes, and then I restart my computer it will donw with a screen BSOD saying driver_power_state_failure.

  There are a few available mini dumps well as I write.
  I have a Lenovo laptop, T420 with intel centrino wireless 6205 r, running windows 7.
  Can I attach the mini dump here somehow.

  Hi, Germain,.

  It is also possible that the Windows Firewall and the antivirus on the computer may be blocking the printers print.

  I wish that you disable the Windows Firewall as well the antivirus temporarily.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: make sure that you re - activate the antivirus and Windows Firewall because the computer may be at risk of infection by the virus.

  Let us know the status.

• MapleStory disconnects after about 2 minutes in Windows 8, no problems with Windows 7

  I just got a new laptop with Windows 8 on it. The specs are well above what is needed for the game, which shouldn't be a problem. I am able to boot and log in the game, but after about two minutes, it disconnects, gives me an error message saying: "unable to connect to the game server. Please try again later. "The window closes so saying me that I was disconnected. The game works perfectly fine on my old laptop, which is running Windows 7 and has worse characteristics.

  I tried to run in compatibility mode, but get a different error after blackcipher loads, but before loading the game, saying: "the instruction at 0 x 00649243 referenced memory at 0 x 05055215. The memory could not be written. Click on OK to terminate the program. »
  I've looked everywhere and can't seem to find solutions.
  If it helps, my computer is a dv7 HP Envy with an Intel i5, 8 GB of RAM and a 2 GB nvidia geforce GT graphics card.
  If anyone knows a solution to make it work, it would be most appreciated. It seems that a few other people have the same problems, but others with Windows 8 have no problem, so I hope that maybe it's just a setting I need to change.

  Hi Sannesteenhuis,

  Welcome to the Microsoft community.

  Please answer these questions to better understand the issue.

  1. Have you tried the steps by Pinaki displayed? If Yes, then what is the result?
  2. Have you tried measures to solve this problem?

  I suggest refer you to the following procedure to copy the Event Viewer logs.

  To view the events in the Event Viewer Application log:
  1. press the key Windows + X key and then click on Control Panel.
  2. double-click Administrative Tools, and then double-click Event Viewer.

  NOTE: Alternatively, you can start Event Viewer by starting the Microsoft Management Console (MMC) program that contains the snap observer of events.
  3. Click to expand Event Viewer (if it is not already expanded).
  4. click on Application.

  The events that are logged in the application log are displayed in the right pane.
  5. to view more details about a specific event, double-click the event that you want to display.
  6. to copy the details of the event, click the copy button, open a new document using the program in which you want to paste the event (for example, Microsoft Word) and then click on paste on the Edit menu.

  Also suggest you try to install the game in compatibility mode and check if it helps.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Hope that the information provided was useful. If you need other assistance do not hesitate to post. We will be happy to help.

• Why my micromax USB internet modem disconnects in 3-4 minutes?

  My micro max 352 G Internet USB modem still disconnects in 3-4 How can minutes, I fix this?

  Hello

  The device disconnects or the Internet connection?

  I suggest that you visit the modem manufacturer's Web site and update the firmware, check if it helps.

  For more information on the firmware update, you will need to contact the manufacturer of the modem.

  You can also run the following methods and check if it helps to solve the problem.

  Method 1: Temporarily disable the security software

  I suggest you to disable temporarily any them program of security on your computer and check if it solves the problem.
  After checking the problem, you must re-enable the security on your computer program.
  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Method 2: update driver wireless if you are connected to the computer via wifi.

  http://support.Microsoft.com/kb/283658

  Method 3: Update Chipset drivers

  I also suggest that you update the drivers from the chipset on the computer by contacting the manufacturer of the computer, check if it helps.

• Xbox Live call disconnection after every 10 Minutes.

  First of all, I am aware of the number of threads on this subject... but I couldn't find a solution after almost a year of searching for a solution. Then... I apologize for this o_o

  Anyway, here's how I put things up:

  Paul (provided by ISP) modem > Linksys SPA2102 (provided by ISP) > Linksys WRT120N > Xbox and computer - everything is wired.

  * As you can see, I have two routers... and I never understood why I can't get rid of one provided by my ISP. If I connect the modem Paul directly to the one I bought, the Internet works everything simply. It is therefore quite confusing when you define things upwards because I have two routers. I tried for the most part all that was mentioned (Portforwarding, DMZ, manual adjustment of the things in the Xbox... can not more just now), except the update of my routers because it does not seem to update.

  If anyone can think of something that might work, please post. If you need more information on the situation, I wouldn't mind doing some captures of screen or something.

  Hey thank you guys.

  As you have a DSL modem, you must convert the modem in Bridge mode to do your job to the X - Box.

• Internet disconnects every 10-15 minutes

  I have a Qosmio G30-194 I bought in February 2008 Dubai Duty free. I have Windows XP on my laptop. I have a broadband Internet connection.

  Internet disconnects every 10-15 minutes on my Qosmio G30-194; After repair, I get the line once more, only to disconnect after 10-15 minutes.

  The system event log says "* EVENT_BROWSER_ELECTION_SENT_LANMAN_NT_STOPPE D * ' with the message" * the browser has forced an election on network %1 because a master browser was stopped *.»
  The explanation reads as follows: "* the network must be a master browser *.»

  What is worse, is there the user Action: ' * there is no user action required. "

  What am I supposed to do other than to take this action, that is, to find a solution to this problem?

  * PLEASE HELP! *

  Thanks and greetings
  Mahesh

  Have you tried to update the Wireless driver?

• Equium A200: Modem USB - disconnection after a few min

  Hallo,

  I have a Toshiba Equium A200 computer laptop with Windows 7 32 bit. I have been using a Modem to USB Internet MTN on it for a year now.

  Two months ago my Web pages stopped loading (on Google Chrome, Firefox, each one) USB would be connected, with a good connection, but after 2-3 minutes of surfing, my webpages simply won t load more, unless I do a restart, in which case I would just repeat the process.

  I contacted my ISP, it s not their fault. I have re-installed all the drivers needed, re-installed the USB modem, I uninstalled and reinstalled all of my webbrowers.

  The USB modem works fine on all other computers. Other USB modems are suffering from the same problem on my laptop, SO the problem is somewhere on my laptop.

  Is there a setting some hand what should I change? Port A setting, or something in the registry may be editor? I have to re - install WIndows 7?

  I really want to fix myself, before returning to the tech guys, they are VERY expensive, where I stay.

  Your help is appreciated kindly!

  UPDATE: the Council following another forum seems to have worked:

  Turn off, saving the settings for hubs/USB ports on Device Manager and see if that corrects issues. I had Windows do stupid shit with power settings USB before who would constantly unplug my mouse.

• Satellite L510 - WLAN disconnects after having ejected the disk USB

  Hey.

  I got my computer Toshiba laptop a few months and have been having this problem early. Initially, it was not the case very often and so it wasn't if big a deal, but now it's getting boring because of the frequency.

  What's happening:
  After I eject any USB connection (the most frequent with my external HARD drive and other kinds of USB keys), my wireless network connection disconnects.

  I always try to go to the tab 'network and sharing Center' and 'disable' and 'activate' the connection, but it rarely works. Most of the time, the pop-up that says something like "allowing wireless connection" doesn't go away. It sort of 'crashes', but not exactly either, as I am still able to use other parts of the laptop. I tried many things, but the ONLY fix I found is to restart the computer.

  HOWEVER, it is not a normal reboot. It takes about 7-10 minutes to restart. There is this blue screen of ms back (is that what it's called?) immediately after it restarts, but it is only there for like 3 seconds and then he asks me if I want to start windows in normal mode or safe mode.

  I would really appreciate if someone could provide any kind of fix for this.

  My laptop:
  -Satellite L510
  -Windows 7 64-bit OS
  -pentium (R) dual-core CPU T4500 2.30 GHz
  -2 GB of ram

  Hi captainmarvel,

  Just a simple question: have you tried to update the driver WLAN?
  New driver WLAN, you can find on the official website of Toshiba in order to check this!

  Well, I never really heard this about WIFI disconnects after the ejection of a USB drive. That's really curious.
  You write that you are running Windows 7 64 bit but it is preinstalled Windows 7 in Toshiba or not?

• I plugged my USB Modem to the computer, it's MMX352G micromax modem. After you connect to the internet, all browsers open the pages of the BM, but in the taskbar sign of the network is to have a red cross. Why?

  I plugged my USB Modem to the computer, it's MMX352G micromax modem. After the internet connection all browsers open the pages of the World Bank, but in the task bar sign network is to have a Red Cross and when I go over it, it says not connected, but I can always use internet in my browsers. Why? It causes an adverse effect on my computer.

  Hi Akash,

  Welcome to the Microsoft community. According to the description of the bar icon problem tasks of the network have a red x, but you can still access the internet. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You use a third-party security software?

  I suggest you follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

  Method 2: Follow the steps in the article.

  Windows wireless and wired network connection problems

  You can read this article for more information:

  How can I troubleshoot network card?

  I hope this helps. Let us know if you need more assistance.

• Belkin F6D4050 v2 USB Wireless Adapter turns off after 5 minutes using Windows 7 Home Premium 64 bit

  I recently bought a wireless adapter Belkin for use in my Media Center PC in the living room. The router I use is also a Belkin N + Router. The wireless adapter will connect to my WPA encrypted network, but it will stop working after about 5 minutes or more. The State of the connection is going to say "No network detected." The icon shows a strong signal with a yellow bang next to it. It takes a hard reboot to get it working again. Take out the USB port and put again does nothing. The icon remains the same, but he won't let me not make a right-click or left-click on the icon. When you try to stop, the computer turns off completely; It gets stuck on the "Shutting Down" screen.

  I disabled the option in the settings to get to power adapter down to save power. I thought that this would fix it, but still the adapter is not connected.  My Dell laptop gets a signal stronger than this card, and there is also no problem to stay connected to the router.

  Any help would be appreciated on figure out how to get the card working properly.

  Hi brutus09,

  Welcome to the Microsoft Answers site!

  That the connection is lost intermittently, the issue seems to be with the drivers.

  As for now I suggest to uninstall the drivers for the wireless adapter and download the updated drivers from the manufacturers website and see if it can solve your problem.

  Access the link below to download the driver for the Belkin Wireless card.

  http://en-us-support.Belkin.com/

  1. go to the control panel and, under "Programs", select "uninstall a program".

  2. Select, then uninstall "Belkin Wireless card driver" from the list.

  3. disconnect the adapter.

  4. using another PC or via an temporary Ethernet, download the latest driver from the link above.

  5. run the executable downloaded on the computer, connect the adapter when prompted target.

  6. connect to your wireless as usual. If you have an encryption key, you will need to enter again by reinstalling the driver should solve the problem

  Warning: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Let us know if it works very well, or for any further assistance.

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• Skype Audio / video call disconnect after 14 seconds in mac

  Skype Audio / video call disconnect after 14 seconds in mac

  1. call interrupted after 13-14 seconds

  2. cannot hear the caller's voice but may receive on my side

  3. I have reinstall the Skype delete old does not work

  4. even I have remove the whole mac and reinstall is the same question

  5 normal voices of Skype can hear I can do auduio / video on the face time

  so its means something wrong after that I tried everything I decided to inform Skype because I didn't even have no solution or anyone else have problem with that

  Finally I found the solution that my firewall was turned off, I just turn on and work and then I turn off again and its working fine but this solution that I found after post

• Satellite P100-400: WLan disconnects after seconds of connection

  Hello

  just bought a Toshiba P100-400, but I have a problem with the wireless card, I think.
  It disconnects after seconds of connection Wi - Fi. I have already downloaded the readers of the toshiba site, but it still does the same thing and I can't surf the web.

  Is this a hardware or driver problem?

  Anyone?

  Thank you

  Hello

  Similar problem was with older Intel 2200 BG WLAN card, but it is resolved with newer drivers. Please check the download page of Toshiba or Intel download page under http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=2259&lang=eng

  By the way: this problem was not present with all routers. I noticed this just with a few of them. Test of connection with different WLAN routers (different manufacturers).

• RN204 not reconnect the USB in the port back after reboot.

  I don't know if that's a problem, but my new RN204 unit will not see my USB stick after reboot. Key, I inserted into the lower back USBport. Port superior return I got UPS. Inverter is connected ok after reboot.

  If the USB is in front of USB port, unit connects OK after reboot. Rear ports, I have to go out and re - insert USB stick after every reboot. Key is detected and mounted after rehabilitation only. (connected external storage device.)

  USB drive is Kingston USB 3.0 and my RN104 unit detects that it restarts after all in backport more or less right. (after a reboot it tell me automatically (connected external storage device.))

  FW on the two unit (RN204, RN104) is 6.4.1 - T35, tested on 6.4.0 and 6.4.1 beta 1-2 - all the same.

  Hi all

  After you install the new version of FW 6.4.2 (Final, published today), everything looks OK. My RN204 unit reconnect all the USB key, that I tested.

  Everything is OK, the Bug disappeared. I think that FW 6.4.2 is the solution to the issue being reported.

  Thanks Netgear.