Wireless disconnects after a few minutes, restart result BSOD

Similar Questions

• NB100 - wireless lost after a few minutes

  Last week, I bought a NB100. Everything works well, next to the wireless network.

  It starts fine, but after a few minutes the connection is lost, I can't access the internet and/or e-mail anymore. The report shows an excellent connection and it is connected.
  When I click on the and select restore the connection it works fine again for about 5 minutes. On my laptop 'normal' I have no problem at all.

  What could cause the problem?

  Try to update the driver WLAN and the BIOS. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

  In addition, you should try to disable all the features of security as a hidden SSID, MAC address filtering and so far away.

  Search the Web site of the manufacturer of the router for a updated firmware, and after it he set factory reset and reconfigure the router.

• Satellite S50-B-131 disconnects after a few minutes

  Today when I finished my recording and after only 2 minutes my S50 has disconnected itself... I restarted again, and then again after 2/3 minutes and then... I tried to use only the batery to check if the power supply is a problem... Same situation... However, whenever I have started on the laptop set to normal and fast before disconnect you again. Clues?

  I have to finish the work and its only in the hard drive, I was about to copy it into the external memory... but not the time until it discoinnected...

  I had suggestions appreciatte

  Thank you!!

  Carlos

  With "disconnect" you probably mean "unplug", no?

  On this virtual path, it is not easy to say why this is happening. What kind of job do you have?
  I mean if the laptop turns off without apparent reason, it could be due to overheating and critical temperature of material.

  Can you please do a little test? Start your laptop and enter the BIOS settings. After doing this let him for a while and let us know if laptop will stay on or switches OFF again.

• When I shutdown computer after a few minutes his restarts automatically

  When I shutdown computer after a few minutes his restarts automatically

  Try this... you can first unplug your cable ethernet and if it does not restart... here may be the problem. The following has worked for me, but I tried not to disconnect the cable first.

  Open network and sharing Center

  In select it left panel > change map settings

  Right click on Local area connection > properties > configure

  Advanced tab

  The title of the property (listbox):

  Select > Shutdown Wake-On-Lan

  In the value (drop down list): (change) turn off

  I hope that helps!

  Jason

• HP DV6 NOTEBOOK AUDIO GOES OFF AFTER A FEW MINUTES, ENVY MUST RESTART EVERYTIME I USE LAPTOP

  HP DV6 ENVY LAPTOP PC

  Product number: C2L31UA #ABA

  8, 64-BIT WINDOWS

  Hi, my problem is that my audio goes off after a few minutes, then if I want it back I have to restart the PC and it seems in good condition, but imagine having to restart your computer after you have initially fed up whenever you want to use the PC. The Support assistant says that my drivers are up to date, that the problem may be due to the fact that I didn't have this problem until recently who told me that one of the automatic updates at the origin of this problem.

  In addition, a problem that has never set was my internet inexplicably drops for no apparent reason. Sporadic problem and has nothing to do with my connection as it has occurred in several physical locations. Open Internet explorer by clicking on 'fix the fitting' works after a few minutes, but it is only a band-aid solution.

  Any help would be much appreciated.

  Signed

  EXTREMELY FRUSTRATED AS MULTI BILLION 2 COMPANIES MICROSOFT AND HP IS UNABLE TO MAKE USABLE PRODUCTS. I GUESS THEY WANT PEPOPLE TO MOVE TO APPLE. SORRY FOR THE RANT. A SENSE OF DESPAIR.

  Hello

  On the audio issue, try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the update of KB2962407, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  If the pesists of the problem, right click on the speaker icon in the taskbar, then select playback devices.  Right click 'Speakers and headphones' (or speakers/HP), and then select Properties.  Select the Advanced tab, and then remove the check box "allow applications to take exclusive control of this device."  Click apply and then click Ok to save this change.

  Restart the laptop.

  Kind regards

  DP - K

• Whenever I caonnect my internet home, McAfee start poping of alerts, and after a few minutes (5-10 min) get the errors of generic host for Win32 process has encountered a problem and must be closed.

  Generic host win32 problem...

  HI, I have soundcards XP SP2, version 2002. Whenever I caonnect my internet home, McAfee start poping of alerts, and after a few minutes (5-10 min) get the errors of generic host for Win32 process has encountered a problem and must be closed. After all that, my internet stops working and against hepatitis a to erboot to make it work again. Help, please

  Hello

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  Windows wireless and wired network connection problems

  For reference:

  How to reset the Protocol Internet (TCP/IP)

• Error message: device is ready for use, and after a few minutes the error message "hardware Id missing.

  Original title: hardware Id missing

  I recently acquired a voice recorder HccToo 8 GB. However, whenever I connect it to my computer I get a message saying that the device is ready to use and after a few minutes the error message "hardware Id missing.
  The usb cable that connects to the camera has no problem (and should be universal). And I tried to connect to other computers on win 7 with the same results. I also watched online solutions, but this problem seems to apply mainly to phones.

  I would be grateful for any advice on what I can do about it.

  Hi Nikolai,

  Sorry for the late reply.

  Did you try to connect other USB devices and check the issue?

  If problem persists, try the steps to uninstall the USB Device Manager, uninstall the drivers of device from the list of programs, and then download the latest drivers from the manufacturer's website.

  Step 1:

  Uninstall the device from Device Manager

  • Open the Device Manager
  • Expand the USB section.
  • Find the USB device.
  • Click with the right button on USB and select Uninstall.
  • Select the check box delete the driver for this device.
  • Restart the computer after the uninstall is complete.

  Step 2:

  Uninstall the drivers of device from the list of programs in the control panel

  • Click Start, select Control Panel
  • Now, click on programs and select programs and features.
  • Find the USB.
  • Right-click USB driver and select Uninstall.
  • Restart the computer after the uninstall is complete.

  Step 3:

  Download and install the latest drivers for the USB on the manufacturer's Web site

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• SD card disappear after a few minutes on FOS 1.3 on the revolution

  Hello
  I use a few days a revolution GP installed with Firefox OS 1.3. There is a strange bug with the SD card. When I boot the phone, the sd card is recognized, I can take pictures, listen to my music. After a few minutes, the SD card is not recognised more until I have restart the phone.
  I tried the DD on another smartphone and it works fine.
  If anyone has an idea...
  Thank you
  Christian.

  Hello

  After reading the information provided about your question, I suggest you a soft reset of the phone. You can also check with the Geeksphone Forum to see if anyone else has reported it.

  1. Remove the back cover of the phone.
  2. Remove the battery.
  3. Take the SIM card and microSD card (if applicable).
  4. Wait for 10 seconds.
  5. Replace the SIM card and the microSD card in (if any).
  6. Put the battery back in.
  7. Put the cover back on.
  8. Switch on the device.
  9. Check if the question you have is still present.

  Please report to us if this solves your problem!

  Thank you

• After a few minutes of use, Firefox becomes suddenly unable to access most of the sites.

  Firefox running on the latest version of Fedora, after a few minutes of use, Firefox becomes unable to access many Web sites. It seems to be limited to the Web sites I visit frequently, but it is difficult to say. It affects all sites, however. It also affects the same sites every time. Restart the browser fixes it, and that it will often resolve itself given sufficient time, also.

  I tried to clear my history and cookies, reset the browser and navigation without any active modules, but nothing seems to have an effect.

  Try disabling IPv6.

  • http://KB.mozillazine.org/Error_loading_websites#IPv6

  Check also for other issues.

  You can try to reset (power off / on) of the router.

• Qosmio PX30t all-in-one: black screen after a few minutes of inactivity

  I just bought a new all in one Px30t and I have 2 problems with it causing me to nuts.

  I have a mouse battery that dies after 24 hours and the screen goes black after a few minutes of inactivity.
  I changed the settings of the display in standby, the Power Options etc everything I can think of it doesn't seem to make a difference.

  Can also someone point me in the direction of a manual online for the model.

  > The screen goes black after a few minutes of inactivity.
  Can bring back you to life somehow, or you need to restart your Qosmio?

  Usually the manual s user document is saved on the HARD drive (preinstalled original machine). Can find you it?
  Did you check support page to Toshiba for manuals online (Toshiba page for the country of purchase)?

• Toshiba Canvio Stor.E 1 TB 2.5 "great copy hangin out after a few minutes

  Hello

  I just bought the Toshiba 2.5 "Stor.E Canvio 1 TB on a Windows 7 Thoshiba laptop.
  Whenever I do a great copy, after a few minutes, the copy blocks.

  The process explore hangs, it cannot be killed and the only solution is to disconnect the usb port and plug it back.

  How would I fix this?

  Thank you
  Alex

  Hello

  Theoretically, it could be a HARD drive problem.
  Would be interesting to know if the other HARD drive does the same thing

  However Stor.E Canvio is a HARD USB 3.0 drive and it takes min 900mA to operate correctly.
  It might be possible that not enough power provided by the USB port.
  You can try to plug an external USB hub between the laptop and the HARD drive to verify functionality.

• Portege Z930 - 14L + Dynadock U3 crashes after a few minutes of use

  Dynadock freeze, after a few minutes using or when I play the movie on youtube in a few seconds.
  Laptop works fine now, but the display through dynadock solidifies (freezes and the picture will become.) Its stil game.

  Toshiba Portege Z930 - 14L, Toshiba Dynadock U3
  Both aged two weeks. Coercive power disconnect on dynadock and display of the restoration.

  I have test the driver cd, driver of site Web of Toshiba and last pilot displaylink official sites.

  Hello

  What USB port to connect the Dynadock U3 device did you use?
  Have you tested the Dynadock U3 as part of different USB ports?

  AFAIK the Z930 Portege - 14L supports a USB 3.0 port on the right side and two USB 2.0 ports on the back.

• Re: Satellite A300-1MS - after a few minutes DNS no longer works

  Hello

  I have a Satellite A300-1 ms with Windows Vista Home Premium SP2. What happens is that after a few minutes, surfing the web, I can't navigate more unless I restart the PC. It happened with SP1, SP2, IE7, IE8 and Firefox. The only service that stop working suddenly is browsing when "http://dns_domain" is entered in the Solution Explorer. These other services running ok:
  -Skype
  -updated windows
  -update anti-virus
  -http://xxx.xxx.xxx.xxx (using IP instead of domain)
  -nslookup, so the connection to the dns server seems to be ok
  -ping to the router

  The only solution is to restart the PC (turn on/off the network interface or reboot the router does not resolve the issue)
  This happens with the help of wi - fi and wired LAN

  Does anyone have a clue on what could happen and how to solve?
  Thank you very much for reading this post!

  Hello

  Sounds like the system service domain name (DNS) stopped working after a few minutes. Please check the Services (start > run > services.msc) if the DNS client is always started. Also, try to restart this service. It work?

  What antivirus software or security is installed? Try to update and disable the software just to test.

  Sorry, but that's all I can say at the moment.

• Tecra 9100 crashes after a few minutes

  My Tecra9100 (P4, 1.8 Ghz) freezes after a few minutes. He shows no reaction on the keyboard or mouse input.
  No matter if I am using Windows XP, Linux or simply enter the BIOS.

  Restart the system leads to a shorter period until the freezing point (a few seconds).

  First of all I thought about overheating of the CPU, but a small hardware tool shows me that the temperature is normal and the cooling fan works.

  Any idea? Maybe a problem with the VGA?

  Hello

  Yes, it s perhaps something wrong with VGA, but I think it could be a fault memory.
  Try to replace the modules and check if there is some performance enhancements.

  Otherwise, the technician must check the motherboard specifications
  You know it; It is always not easy to say what could be wrong without any diagnostic procedure

• Re: Satellite L750 - the speakers cut out after a few minutes

  My laptop speakers cut out after a few minutes, if I play music from iTunes, a DVD or talking on Skype - ideas please someone?

  And then?
  What should you do to get speakers still work? Laptop restart maybe?

  Are you using the original pre-installed OS that you got with your laptop?
  Since when did you notice this behavior?
  The same happens when you use headphones?