XC651PA: Change the RAM in the computer hp laptop

Similar Questions

• Change the computer name in the network discovery, view old and new names and get error code 0 x 80070035

  I changed the computer names of computers each with windows 7 and a home network sharing. Network discovered each poster now the old and new names. I also have an error code 0 x 80070035.

  How can I get rid of the old names?

  Hello

  Are you able to access computers using the names?

  Step 1: Check out the link to learn how to delete the old name and create a new name:

  Change the name of your computer:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-computer-name

  Step 2: Refer to the section below for more information to correct the error 0 x 80070035 and steps.

  Open the homegroup troubleshooting utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Error 0 x 80070035 appears if you are not able to access the network computer. Follow the instructions in the thread below if you are faced with a similar question:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-error-0x80070035-when-trying-to-share/d8168c72-D51C-41C3-8B8F-3b6bb7f65f43

  It will be useful.

• changing the computer name root

  I want to change the computer name added to the initial setup of the computer. I tried several suggested solutions and none worked.

  The easiest way to do what you want is to create another user with privileges to adminstrive account and name what you want.

  Then copy all your data and configure it as you wish.

  When you are satisfied, remove the original account.

  Edit: Didn't see page 2

• Impossible to change the computer screen brightness samsung laptop

  recently I installed internet explorer 9, after that iam unable to reduce my brightness.but screen before I can able to adapt with the key Fn + arrow down, but subsequently don't not able to adapt, but I can't able to contol volume with the Fn + left arrow key & right keys. but unable to brightness control... so, what's the problem?

  Hi david,

  1. What is the operating system installed on the computer?
  2 are you able to increase brightness using FN + arrow upward?
  3. What is the model of your laptop?
   
  
   
  I suggest you follow the methods and check if it helps.
   
  Method 1: Change the brightness by following the link and check whether or not your laptop brightness changes.
  To enable or disable the Adaptive brightness
  http://Windows.Microsoft.com/en-us/Windows7/adjust-your-monitors-brightness-and-contrast
   
  Method 2: Update the drivers keyboard and graphics cards and check if that helps.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
   
  I hope this helps.

• Laptop HP Pavillion 15-p051u: HP Recovery Manager should be able to change the computer creating media?

  I'm doing the original backup set of DVDs for a laptop HP Pavillion (15-p051us) 15. Due to an error, I'm afraid to continue.
  I got to speak with a HP tech person, who helped me to pass the second record to DVD. now, I'm trying to start the burning of the third DVD of backup recovery. When I click on the button to launch the "HP Media creation" I get interrupted with a window which shows:

  ***********************************************
  * User account control *.
  ***********************************************
  *                                                                                          *
  * Want to allow the following program *.
  * to make changes to this computer?                      *
  ***********************************************
  * Program name: HP Recovery Manager *.
  * Verified Publisher: Hewlett Packard Company *.
  * Original folder: hard drive on this computer *.
  Program location: "C:\Program Files\ (x 86)."
  * Hewliett-Packard HP Recovery Manager\ *.
  *    rebecca.exe"\CRM                                                   *
  ***********************************************
  *                           Yes     No                                              *
  ***********************************************

  I obviously don't want to change the program to backup for me when I'm not finished to make the backup. (As I've noted, two DVD's burned and verified. Four still needed.) But when I click on the button 'No' to say "don't edit my computer now until I finished the last four DVD" disappears from the user account control window and the creation of HP recovery media is not engaged. My first two questions are (1) why my computer wants to interrupt the creation of my 6 DVD recovery until the work is done? (2) it would be safe for me to click on the 'Yes' button or what may cause a fatal error in the backup process? In a note, I would like to report that the person HP with whom I spoke on the phone mentioned the fact that the error can be caused by lower DVD media. To counter this notice I tried three DVD good nine successive State. I used more than a dozen DVDs of this package on another computer. With these, he had no problem with registration, verification or later to read these DVD. If my guess is that it is unlikely three of them failing in the HP computer. I don't think that's the problem. I read through 60 first found elements that were identified when I did a search on the website of HP using the key phrase 'Recovery Manager change'. This has proved a total of 7499 possible Articles, but I looked through 60 without success.

  Answer Yes to user account control. This is the irritating feature of Windows that assume at all times that you don't know what you're doing. HP Recovery is harmless and should have access to the files on hard drive.

  For example, you could get the same question when you try to install the software for a printer, etc. and would answer Yes - you would answer no if a piece of malware slipped on your system and UAC taken he's trying to make changes and pointed out.

• How to change the computer name of existing desktop computers linked clone pool?

  Hello

  I'm curious about something that has developed in our Organization.  New guidelines came down and we have to change the name of the computer for all of our offices to meet the new criteria.

  I have many of our users is on the offices of Linked-Clone (automated pool, dedicated, assignment see 5.1) which will have their names have been changed.  I use a 'model' for the name of the computer.

  I tried this before by simply change the settings of the pool, and then recompose the pool.  Recompose worked well, but NONE of the virtual machine names have been changed.  All machines, recomposed just fine, but keep the old name of the computer (non-compliant).

  How can I change the name of the computer of my clone in an existing pool offices?  Maybe I have something wrong.  I'm doing it instead of having to create a new pool and move the persistent disks.  I would like to change the name in the settings of the pool and recompose, but it did not work.

  Scenario:
  See 5.1

  Automated cloning related pool

  Assignment of dedicated (persistent disks)

  Thanks in advance

  It is not possible to change the name of existing workstations by modifying the settings of the pool. There is no way to make this happen automatically and in doing so manually would not seen happy.

  Unfortunately, for dedicated pools, you will have more work to do. If you do not use Persona you detach the persistent disks and recreate virtual machines in the pool with this disk to create a new virtual machine with a new name to be generated.

  If you use Persona you could remove all virtual machines and have Persona to extract profile data down to the virtual machine that would be entitled to the user when they connect then. This will cause all user installed programs go, but I hope that's not common if you are already using linked clones.

  I encourage to go to the next page, click on the feature request form link and publish information on what you're trying to do:

  https://www.VMware.com/support/policies/feature.html

  Notifications about features are reviewed by VMware and if you can get enough of your friends/colleagues notice to users to ask something often a solution will grow in any kind, nature or form.

  Hope this helps.

  -Mike

• Compaq Presario CQ56: a problem with the computer keyboard laptop presario CQ56

  All keys (F) Act as the FN key is been held down when it is not. This just started today. I have a free prog called "keyboard test utility. Now, I have discovered that I can get 1 clean tap of F4 and the prog to test keyboard shows only illuminated F4. The next time I hit the letter (P) F4 and the Windows key are lit. Now, if I tap the FN key, and then press the F4 key. Again, F4 is the only 1 who turned on the prog of test. It's almost like the FN button nosed. I just to confirm. Rather than hold down the FN key to get things under the keys (F) (as a volume-, volume +, cut and so on). Now, I have to hold down the FN key to get the regular F1 to F12 keys. The rest of the keyboard is fine. A regular toggle switch or a switch in a radio push button. The FN key acts like someone ripped the wires to the back of the switch and reverse the wires and the switch can operate in reverse. Beats me how this can happen to a laptop keyboard.

  Steve

  Hello

  Here are a couple of things to try.

  1. judgment of the laptop.  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  2. try to change the default action of the keys 'f' as follows.

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the Bios ( f10 ) option, and then change the figure in the document at the following link.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c02035108 & DocLang = in & docLocale = en_US &...

  Kind regards

  DP - K

• No option to change the brightness on laptop HP 2000

  Hello!

  Until yesterday, I had no problem changing the brightness on my laptop.

  Last night - I tried pressing the brightness function keys, the bar should go up and down, but brightness has not changed. Then, I went into options power and changed the brightness slider on the plan that I used, no change.

  Today - now when I press the function keys, does nothing and the bar does not appear on the screen. When I go into the options of power plan, the slider for brightness is no longer present. When I go into the settings of charms, the brightness option is faded and says "not available: Windows cannot adjust the brightness of the display. Enter the options of mobility, the cursor is present but it does nothing to move vertically.

  Things I did so extreme - checked the driver (who had not put to day for a month, since I bought this laptop), uninstalled and let the system reinstall when I rebooted, got a few older versions and manually installed them as a return to the basic display adapter, all to nothing does not. The only thing that works (almost) is the graphical control panel intel. There is a 'brightness' option, but it isn't really light... its more of a relief of the colors used rather than a burst of real light. I downloaded the so-called Hp My Display in the same direction.

  Can someone help me? Please, I don't know what the reason even the ability to change the brightness being removed... I have not updated anything manually (until later, I noticed the problem). I am the administrator and the only user of this laptop.

  

  And it is the current driver, that I installed it, which I believe is the most recent. However, I begin to doubt that he is still a driver problem...

  

  Please, I'm getting a headache... Thanks in advance for any help! I'm not super computer savvy, but I'll try all the solutions!

  I seem to have (finally) solved the problem.

  I had installed Splashtop Streamer of office about two weeks ago... To the people who read this with a similar problem, Splashtop lets you remote access to your desktop from another device (phone, Tablet). I chose Restore my computer just before the hour, it is installed.

  I couldn't restore first because windows said-

  "System Restore failed, files, and your computer's settings have not changed.
  Details;
  System Restore could not access a file. This is probably because an antivirus program is running on the computer. Temporarily disable your antivirus and restart System Restore.
  An unspecified error occurred during the restoration of the system, (0x80070005).

  Tried about five times (gad!) before finally being able to restore by (sorry if my instructions are vague) go to control panel - system and safety - administrative tools - services - microsoft software shadow copy provider - right click - properties - change type of automatic manual start - stop and start the service again.

  I also uninstalled my antivirus (AVG) because just disable initially did not work. I don't know which of these two solutions have finally made it work, but I'm just happy that I am finally able to change my brightness again. All the options in the charms and the power plan options and my function keys work again.

  I guess that changes something Splashtop in the display configuration (logical when I think about it now, but he has not touched me for two weeks, I guess why I did not both together)

• Cannot change the number of laptop Apple ID because I moved from the India

  I can't change the number of mobile for notifications in my Apple/iCloud account, it shows my old Indian number but I moved from the India and now Iam in Tanzania. He asked security questions that I don't even remember...

  I can not yet implemented iCloud keychain...

  Need help, he cannot set up on my Mac, the iPhone or iPad

  You can change preferences/iCloud/Keychain/options of the system?

• Pavilion g6 - 2400ca: installing drivers for windows 7 on the computer pavilion laptop g6 - 2400ca

  Hello

  I just installed windows 7 instead of windows 8 on my computer pavilion laptop g6 2400 ca, and I'm missing some drivers.

  Here is the necessary drivers, can help you please?

  Bluetooth controller:

  PCI\VEN_1814 & DEV_3298 & REV_00

  PCI\VEN_1814 & DEV_3298

  PCI\VEN_1814 & CC_0D1100

  PCI\VEN_1814 & CC_0D11

  PCI\VEN_1814

  PCI\CC_0D1100

  PCI\CC_0D11

  Network controller:

  PCI\VEN_1814 & DEV_3290 & REV_00

  PCI\VEN_1814 & DEV_3290

  PCI\VEN_1814 & CC_028000

  PCI\VEN_1814 & CC_0280

  PCI\VEN_1814

  PCI\CC_028000

  PCI\CC_0280

  Ethernet controller:

  PCI\VEN_10EC & DEV_8136 & REV_05

  PCI\VEN_10EC & DEV_8136

  PCI\VEN_10EC & CC_020000

  PCI\VEN_10EC & CC_0200

  PCI\VEN_10EC

  PCI\CC_020000

  PCI\CC_0200

  Unknown device:

  ACPI\HPQ0004

  * HPQ0004

  PCI device:

  PCI\VEN_10EC & DEV_5229 & REV_01

  PCI\VEN_10EC & DEV_5229

  PCI\VEN_10EC & CC_FF0000

  PCI\VEN_10EC & CC_FF00

  PCI\VEN_10EC

  PCI\CC_FF0000

  PCI\CC_FF00

  WD SES peripheral USB controller:

  USBSTOR\Other

  USBSTOR\RAW

  Hello

  Install:

  RALink Bluetooth 4.0
  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59632.exe

  RALink 802.11 b/g/n
  http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61580.exe

  Realtek PCIe GBE Family Controller drivers in the series

  HP ProtectSmart hard drive protection

  Realtek PCIE card reader drivers

• sound does not come on the computer pavilion laptop

  I was using my computer when there was a popup for an update from hp. I've updated and then restarted the computer, but there was not his coming out. everything worked well, just noise. On the small speaker mixer microphone icon shows that he has his fate. even when I adjust the volume the ping that is supposed to be heard is not there, but it shows as green and spikes to show that there is a sound that is supposed to be there. How can I fix it?

  "Laptop HP Pavilion dm4-2191us

  Product number: QE382UA

  Hello

  Try the following.

  Download the installer from IDT Audio relevant on the link below and save it in your downloads folder.

  IDT Audio Driver - Windows 8.

  IDT Audio Driver - Windows 7.

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• How to change the computer information

  Hello

  I'm looking how to change, via the terminal, the 4 fields named info 1 and 2 info, info 3 info 4 in the "system preferences/sharing/remote management / computer settings button.

  These fields are displayed in the ARD and ARD reports and are very useful to sort the computers when you have a large number of them.

  

  PS: Since the upgrade to El Capitan when I try to change these settings through ADR, ARD crashes whenever I try to send the command to make this change on a remote computer.

  Probably more useful for you, but fashioned I would answer.

  sudo defaults write /Library/Preferences/com.apple.RemoteDesktop \Text1 "TextForSection1".

  sudo defaults write /Library/Preferences/com.apple.RemoteDesktop \Text2 "TextForSection2".

  Configured to run as root

• The computer upgrade laptop RAM

  Hi, I've had my HP Pavilion m6 1006tx for about 11 months now and I had success in the basic forms of games (minecraft and other training games not so much). Now, my computer has an Intel core i7-3612QM multi-core cpu clocked @ 2.1 ghz with intel boost 3.1 as well as 2 GB RAM graphics card dedicated AMD 7670. But I'm here to talk about upgrading my RAM, I noticed that 4 GB of RAM does not allow me to run a lot and all-in-all barely able to run a game requiring a minimum 2 GB of RAM, so I would like to know if I would cancel my warranty if I upgraded my RAM.

  I also want to know if the RAM as the dicksmith (http://www.dicksmith.com.au/computer-accessories/dse-8gb-ddr3-1600mhz-nbook-ram-dsau-xm5717) would work with my laptop current RAM which comes with the laptop, as in can I use RAM of two different brands, first and second, can I used two different amounts of RAM at any given time?

  Thanks for the reply if you do. Also if you need all the most characteristic, or do not understand anythings please indicate so and I will clarify with you details

  My apologies, just need to really read it, I just read the forums main post with the upgrade and other things, I tried to look before and it has not loaded so I posted this but it's working now, sorry guys

• Want to change the computer name of PC/crumbs to PC/CrystalDawn without reformatting or open new account

  Hi all!

  I hope someone can help me with this; I'm trying to change my computer name of PC/crumbs to PC/CrystalDawn without having to reformat or open a new account CrystalDawn and manually migrate thousands of items saved so far, as suggested by another user in this Forums MS 2009 post on my computer:

  http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/88d24e9-C944-4DC8-86cd-6057ccfc04a2

  It seems a little silly that I have to go through so much trouble to make such a minor change and back.  If someone could explain if and why it must be so annoyingly difficult just make this small change, perhaps understanding would help me decide if I would go through with the whole rigamarole if it is really necessary.

  I guess my other question will be, is it really necessary?  The people at the other end of files displayed in a portal online or any other place see the ' PC/crumbs' or 'Documents/Crumbs/filename.doc' or do they see just "door"?  I'll keep it like that if it's only visible as of the crumbs in my computer, but since I work online and send files of professional document a lot, a lot, I certainly don't want will be called "crumbs".

  Any help would be appreciated because I don't have the $60,00 by every 10 minutes if I had to call Microsoft itself.

  See you soon! ~ AwmostDone

  If you want to rename your computer, here's how: http://www.ehow.com/how_5124750_change-computer-name-vista.html

  However, I think you mean you want to rename your account. You can do, but the record of account will be always called crumbs here:C:\Users and everything related to saving the files. The files will always be completely when you put them and nothing's wrong turn.

  If you download the file to a service such as skydrive, the file is stored on the server of the site and has nothing to do with your computer more (so they'll just see).

  I know it's annoying that you cannot rename the folder of the user himself. Maybe they'll fix it someday...

  teengeek.freehostingcloud.com Microsoft community contributor

• Toshiba Tempero wants to change the computer each time at boot

  So, I click Yes and command prompt flashes for a second and then disappears.

  This normal?

  Hello

  You can disable the startup Tempro.
  To do this in msconfig.
  In run, type msconfig, and then select the Startup tab.
  Here the tempro uncheck and reboot the device.

  All that s.