XML report (with report.xsl stylesheet) print shows the font colors, but not highlight table colors

Similar Questions

• HP network printer shows the network map but offline on the list of printers.

  On one of my computers networked, HP "Solutions Center" said driver HP 6310xi printer is connected, the status of retail & will print their diagnosis directly report to the printer.  Windows 7 printer in network map poster, & gives status & installation information data information internal printer via IE by page (192.168.1.100) to the IP address of the printer.  However, control panel Windows 7 printer displays printer as "offline" on the list of printers & just policies of the print requests.  Troubleshooting gives error message "turn on printer monitor.  Other printers to print OK network.  Bad computer is on a different subnet in my home network with a wireless LinkSys WET610n connection bridge.  My network is totally LinkSys N.  Why Win 7 make a basic network connection to the printer, but not recognize it as a printer online?... HTC

  The printer can be reset and changed its IP address in the process [that's happened for me]. To fix this, go to the center of sharing of network &--> the map and click on your printer. This will tell you the IP address that your printer is running [the number which should be something like 192.168.1.xxx]. Then go into devices Printers &--> printer--> port--> Port TCP/IP Standard for your printer properties--> configure the Port. So, you want to change the IP address where it says "printer name or IP address" to the new IP address that you have found.

• USB-232/2 shows the COM ports but not found resources VISA!

  Hello

  I use an NI USB-232/2 interface to connect my OMEGA Engineering temperature controller to computer. The thermostat communicates with the computer via hypertermianl and the configuration of the OMEGA software, but can not be detected by OR MAX I've attached a screenshot of my MAX of NOR. I could see the two COM ports, but I can't see the VISA test Panel.

  My problem is similar to the post problem OR USB-232! I tried the solution for uninstall and reinstall NI VISA both NI Serial, but still does not.

  OR Labview 2009

  OR MAX 5.6.0

  NEITHER version 4.0 Serial

  Version NOR VISA 5.4.1

  Temperature controller: Omega Engineering CNi1644-c24

  Spoke engineering application NOR two days, no solution. Can anyone help? Thank you!!!

  

  
  

• [ADF, JDev12.1.3] 'Enter LOV': how to show the magnifying glass (but not the inputText)?

  Hallo,

  I have associated with an LOV entry field (FieldA) and I configured the LOV to return the value for the field LOV itself plus other 2 values to fill other 2 fields (FieldB and FieldC).

  So I have:

  FieldA |... | (Magnifier)

  FieldB |... |

  FieldC |... |

  I would like to see the magnifying of the LOV FieldA field but not his inputText.

  Is it possible to do this? If so, how?

  Could I choose the magnifying glass should appear next to what area?

  Thank you

  Federico

  You can add: contentStyle = "" display: none; "to your component LOV;"

  Dario

• Security settings do not allow execution of script code in the report.xsl stylesheet

  Hello world

  I can't open a file of XML in Excel 2007 results - even if I added the stylesheet for trusted locations and deleted all the protections.

  Here's what happens:

  1. open the XML results file how I am propmpted for select the report.xsl stylesheet TestStand

  

  2. then gives error: Scripts in this XML document and/or references to other documents are disabled.

  

  3. by clicking OK gives more specific information - namely the security settings don't allow execution of code within this stylesheet script:

  

  But I did the following:

  -The path to the sheethas style was added to the "trusted locations".

  -ActiveX settings are completely enabled for all controls without restrictions

  -Macros settings are enabled for all macros

  -Is trust access to the VBA project object model

  -All data connections are allowed

  How can I activate the execution of script code in the style sheet for the file XML can load?

  Thank you

  Ronnie

  Ronnie-

  Directly from the Article in the Microsoft Knowledge base, please note that do the following changes "may make your computer or your network more vulnerable to attack by malicious software such as viruses." It's always a good idea to make a backup of your registry before editing. This can be done by clicking on file' export.

  In any case, as the article explains, open the registry and navigate to HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Security. The security file must contain a registry key called XSLSecurityLevel. Mine did not have this registry key and I had to create it (see screenshot below). Double-click the XSLSecurityLevel registry key, type 1 in the data value, and then click OK.

  You should now be able to view the XML from Excel 2007 report. To reset this setting, simply double-click the registry XSLSecurityLevel key, enter 0 in the given value, and then click OK.

  

  I hope this helps!

• Change the font color in a report by using the SQL query

  Hello
  
  I'm changing the font color based using a BOX the query in the form below:
  

  select "ORDER_ID", 
  "ORDER_REFERENCE",
  "ORDER_DATE",
  "ORDER_SOURCE",
  "TOTAL_DISCOUNT",
  "DELIVERY_TYPE",
  "PICKUP_DATE",
  case
       when order_status = 1 then '<font color="red">'|| order_status||'</font>'
       else
       '<font color="blue">'||order_status||'</font>'
  end order_staus,
  "DELIVERY_STATUS",
  "USER_ID",
  "CUSTOMER_ID",
  "SITE_ID"
  from "ORDERS" 
   

  I can get this working by selecting the Standard report column in the type of the column header . However this to say that I can't use the LOV LOV options involve removing the HTML characters.
  
  Is there a way I can conditionally change the font with the above query and use LOV as well? Thank you.
  
  Environment
  
  Apex 4.1.1 to apex.oracle.com
  Theme 13
  
  Published by: taepodong on June 3, 2012 07:28

  I'm sure that not looking the application form first before posting this question.

  Your solution would be:
  Please edit your report column under > report attributes > and select the property view as as a Standard report column

• Change the font color in a report using SQL for APEX 5.0 queries

  Hello

  I'm testing APEX 5.0 in my test environment to see if I can migrate my internal applications of 4.2 to 5.0.

  How can I change the font color in a field based the SQL query? I know how to do it in 4.2, but I can't find the same in 5.0.

  Thank you

  Well, I used to put html tags in the select text, getting the value of depending on the CASE, so I had to change the display column attribute in the report as "Display in text form (space special characters...)".

  I found an old post here: https://tylermuth.wordpress.com/2007/12/01/conditional-column-formatting-in-apex/ and this method still worked for me in APEX 5.0

  Thanks anyway

• I recently updated the Canon mark II to the mark iii, and the images taken of the mark iii will not make previews in bridge. Bridge will show previews for the images taken with the mark ii, but not the mark iii. I have adobe cc and use

  recently updated the Canon mark II, mark iii, and the images taken of the mark iii will not make previews in bridge. Bridge will show previews for the images taken with the mark ii, but not the mark iii. I have adobe cc and am using camera raw 9.2. I checked the updates and it is said that there is not. I also tried to purge the cache several times and that didn't work either. Any help with this would be so appreciated its driving me crazy!

  Take a look at this: generic icons | Files camera raw | Adobe Bridge

• How paste an accordion MENU navigation on a mobile scrollbar page and make it work properly? Like I can't pin, I keep it at the top of the page with scroll effect 0. It collapse, shows the menu buttons but does not close back up once reached the

  How paste an accordion MENU navigation on a mobile scrollbar page and make it work properly?

  Like I can't pin, I keep it at the top of the page with scroll effect 0.

  It collapse, shows the menu buttons but does not close back once it reaches the anchorpoint.

  Appreciate your help. Thanks.Guess I need to find another solution. Am an artist and don't know anything about coding.

• Interactive report - changing the font color of column.

  What would be the best way to change the color of the font color (data) in the interactive report without changing the model?
  
  Thank you
  
  Robert

  Then the best way is to use css as mentioned by Paul here {: identifier of the thread = 2397346}

• Folder "Programs and features" shows the installed program, but is blank when the file size must be listed.

  Original title: what does it mean when you have a program installed, but when you open the folder "Programs and features" it shows the program installed but remains empty where should be the size of the file?

  Shows information for the installed program, including the NAME, PUBLISHER, & INSTALLED ON (DATE), but under the info column of SIZE empty sound while 98% of all my installed programs show how much KB or MB "and specific program installed. Seems to lack the SIZE info only on any one of my Adobe programs and a few select other random programs?

  Hi AlinaSporl,

  The size information is reported by the uninstaller for each program component. A program of uninstalling programs will not report this value, so the size of the program does not appear in this list.

  Another way to get a close estimate of the total size for an individual program is to check the properties of this installation of programs parent folder in C:\Program Files.

  You can read the following article and check:

  How add/remove programs is the size and other information?

  Hope this information is useful.

• The text is visible on the computer screen, but NOT print

  The text is visible on the computer screen, but NOT print

  When I print the document (the header and the footer together can print).

  My printer is Lexmark X 5470.

  Please tell me how to solve this problem.

  Thank you

  Longpo

  Hi Longpo,

  1. what happens when you try to print?

  2. you receive an error message/code?

  Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer. Refer to the help article and check if that helps.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-printer-problems

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Cannot connect to the local file and print when the domain controller is not available because the network connection

  Hi all
  Having problems for local users, connection to a file and print server in one of my satellite offices.
  When my t1 connection is disrupted (problem of local carrier) my users when the connection is down to connect to the file room and print and always have access to their files and the local printer.
  The domain controller is off site in my main office.
  Environment:
  All local desktop clients are windows machines 7.
  Printing and local file is a windows 2003 server.
  DC is window 2008
  Note that we recently changed all 2003 to all domain controllers the PDC 2008, suspect that it may cause the problem, but just cannot know where it track.
  Any help or thoughts would be appreciated.
  Thank you

  Hello trj'hwma,

  Thank you for the question!

  It's discouraging to know that have problems you with the local file and print. As I understand well you cannot connect to the local file and print when the domain controller is not available because the network connection.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you have problems with the local files and print or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• PS do not show the same colors and LR

  LR and PS now showing the same colors

  I do most of my work in LR and then edit in PS. When the image is displayed in PS it appears same as LR - I can show both applications side by side and the images are the same... As it should be.

  If I then save the image in PS (under a new name) then refresh LR, I see different colors in the new image in LR. It is more obvious (for the moment) in the pictures with a lot of red wines. It seems that the saved image of the PS appears a bit lighter in LR than the original.

  I sRGB in use everywhere - in the camera, LR, PS-I tried with GPU acceleration on and outside.

  I'm now getting annoyed that I can't find the cause.

  I edited as PSD and TIFF and problems remain.

  I don't remember having this problem before, so I saw my recent updates.  LR and PS have been updated. My video drivers have been updated so I their income with no improvement.

  I even saved JPG from LR and PS: the outputs are different, even if I do any changes.

  Clues?

  I solved my problem (the following tips on another thread)...

  I had defined LR in order to apply the auto tone when new images are added.

  It is fine when I load the original of the camera... but also to apply the auto tone to the acquired images of Psalm

  So, I edit in PS, save it... then, when imported LR / synchronize the image, automatic tone applied Informatics and it changed. This explains how LR and PS display different images.

  It is a setting that I recently activated and not a problem with the LR or PS

• After installing my .ipa in iTunes and sync my iPad, the app just show the start screen but nothing else

  In collaboration with InDesing CS5.5 and contained Station 7.6.526 of WoodWing. I generated my .folio file. I tested in a content player Adobe 2.4.0 and each run ok. I perform all the process in the Bulider bleow my .folio and icons, certificates.p12 mobileprovision file viewer. When the compilation is finished I have donwloaded the .ipa file and added to my iTunes. After I sync my iPad icon appears but when I launch the App its show me the splash screen, but not the content of folio. In the index, I can see all the spaces that the app / folio needs for all items but not market show the content in any way. The .ipa file is 115 MB, so... must be something inside...

  Note: I work with content Station of Woodwing

  What I need to fix? Where is the error?

  Thank you!

  

  On your dashboard of DPS, scroll down to the bottom of the page and click on Contact and manage the Gold support.