XP after re-installing the virus

Similar Questions

• Why my virus program esetnod 32 guard tell me that my system is not updated after you install the update of all the nessary?

  Why my virus program esetnod 32 guard tell me that my system is not updated after you install the update of all the nessary?

  I have download all necessary Windows 7 updates, but they are not installed. Can anyone help?

  Kind regards

  Mitch

  Hi Mitchell,

  Please uninstall and reinstall the ESET program and check if it solves the problem:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  For further assistance:

  ESET knowledge base

  http://KB.eset.com/esetkb/index?page=home&locale=en_US&option=None

  Please post us with the result.

• After you install the update, I get this message on an application Facebook '502 Bad Gateway nginx' what is the problem and what should I do to solve the problem?

  After you install the update, I get this message on a Facebook '502 Bad Gateway application
  Nginx' what is the problem and how do I solve the problem?

  See also:

  • http://en.kioskea.NET/FAQ/15289-Google-nginx-404-error
  • [811399/questions/811399]

• HP 5510 will be not printed black before and after you installed the new cartridge. the specified controls did.

  Photosmart HP 5510 will be not printed black before and after you installed the new cartridge.  The specified controls did.

  Yes, I was referring to manually clean the print head. I see that the 5510 lacks the possibility of leaving the print head manually.
  
  You can click on the menu of your SETUP program on your screen and go to TOOLS and clean the print head from there.
  
  If this does not resolve your problem, you may need to replace the print head.
  Contact HP Total Care (1800-474-6836), and if your unit is under warranty, its free.
  
  Let me know if this can help, thank you.

• CD drive icons disappeared after I installed the Norton Recovery tool

  Original title: My CD drive icons disappeared after I installed the Norton Recovery tool

  I downloaded Norton Recovery tool, created the rebootable disc. Tested, everything OK. Then found all my readers of DVD disc including a player clone of Ebly, disappeared from "My Computer". They are always in my device manager, but have a yellow tag attached to each of them.
  Can someone tell me how to get back them?

  Good... got to step 5, then got confused (never been here before). Are you telling me to delete point 4, 4 d 36965 - etc? Or lower and upper values in mentioned in step 5

  Locate and then click the following registry subkey: this will expand the content of the key in the right pane of Regedit.

  
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  
  In panel right, if you have UpperFilters, right-click UpperFiltersand then click Remove.

  Click Yes to confirm the deletion of the UpperFilters registry entry.

  In the right pane, if you LowerFilters, click LowerFilters, and then click Remove.

  Click Yes to confirm the deletion of the LowerFilters registry entry.

  Exit the registry editor and restart the computer.

• I plug in a device after I installed the drivers from the USB says windows can't recognized the device what should I do to solve it.

  I plug in a device after I installed the drivers from the USB says windows can't recognized the device what should I do to solve it.

  Hello

  I suggest to go to the link below and run the fix tool provided or follow the manual procedure provided to solve the problem.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  You can also check the below link for more information about advanced troubleshooting tips for General USB in Windows XP problems.

  http://support.Microsoft.com/kb/310575

• print DigitalPersona finger scanning does not work after you install the recommended updates

  My impression of digitalpersona finger scanning does not work after you install the updates recommended on my dell Vista

  Hello

  1. do you have an error message?
  2. are you referring to the print scan hardware or software scan print that was supplied with the device?

  Method 1:
  I suggest you to update the software DigitalPersona from the link below https://www.digitalpersona.com/support/downloads/

• After you install the update for LR cc 2015/5 AffichageOptions in the library doesn´t Module shows any type of lens. What has gone wrong?

  After you install the update for LR cc 2015/5 AffichageOptions in the library doesn´t Module shows any type of lens. What has gone wrong?

  See this thread on the official Adobe feedback site: Lightroom CC 2015: objective metadata missing when importing field. Community customer Photoshop family

• After you install the creative cloud, the applications Panel isn't visible.

  I have a few apps installed standalone (without CC) CC, such as Photoshop first, Media Encoder, but now I want to upgrade.

  After you install the creative cloud application, the applications Panel is not visible, so do not showing me the installed applications.

  

  The following applications are installed:

  -hearing

  -photoshop

  -flash

  -media encoder

  -illustrator

  -legacy

  -Prelude

  -first pro

  All are CC 2014.

  You can check: missing Creative Cloud desktop applications tab

• Hello everyone, after correctly installed the creative cloud adobe now I want to update, the program also tells me to do. But the problem is that connection only goes up to 2% and stops, every time freaking. Weeks before. What is the problem? And Yes

  Hello everyone, after correctly installed the creative cloud adobe now I want to update, the program also tells me to do. But the problem is that connection only goes up to 2% and stops, every time freaking. Weeks before. What is the problem? And Yes, there is an internet connection

  Good afternoon

  Thank you for your response. It was the right solution, but I missed something in your response. I had to start several times to download / update. Throw/delete (or the procedure of the description) files don't get past not like you described, but I tried something myself and it worked finally.

  But I have to ask: If this problem continues, of course, that a workaround is available, why is this a problem in the software persists, exist?

  Maybe you can't give answers, but I'm just wondering, well thanks for your help.

  Green eyes greeting

• High CPU use/Slow Performance after you install the updates of Windows

  I run Vista Business 32-bit.

  After you install many Windows updates in the last few days, I've known very slow performance after the system worked for a while. Resource monitor shows 70-100% CPU usage, even when you run all the apps (that I know of). This makes everyhting grind to a halt, same trip that the mouse jerky movements. I ran several complete system with McAfee anti virus scans and not found problems (using the latest software). The detail showed the so-called ", PID4 NT kernel and system" using 18% avialable CPU capacity, but this process is not always shown to use much more capacity when the slow performance occurs. Nothing else don't use much capacity CPU, I see.

  More recently, the capacity of the CPU became crazy, jumping from zero to 100% usage in a back a suite oscillation. When I shut down and restart, performance improves, but erodes little by little over time.

  Is this a sign of a virus, or is it a problem with the recent Windows updates or some kind of conflict with my software such as McAfee? How do I tell me what to do? Anyone else have this problem with the recent Windows updates?

  Help!  Thank you!!

  McAfee applications (and Norton) are known for not not upgrade (or uninstalling) itself.

  1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. now run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  NOTE: Step #2 McAfee fix run the removal tool, you have already downloaded in my step #1 above.

  4 IMPORTANT! => After the reinstallation of the McAfee application (step #3 of the McAfee fix), manually & repeatedly updated the McAfee application, until you get a prompt "no update more".

  5. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  6. OPTIONAL: For good measure, pen also Internet Explore (only) to http://support.microsoft.com/kb/971058 & race that secure it in DEFAULT and modes and AGGRESSIVE. [1]

  7 restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Satellite Pro T130 - problems in sleep mode after you install the update wireless

  After installing the 3G modem & updates on day of Wireless manager from 29 September, my laptop began to have trouble waking sleep mode. Most of the time I had to hard stop. I solved currently the changing options issued for the "sleep mode" in the Panel, for the most part by turning off the advanced features (hybrid sleep, sleep, sleep network adapters usb). However, I want to solve the problem no doubt, as the current options require more time to enter the mode 'sleep'.

  My laptop is a Toshiba Satellite Pro T130 running under Windows 7 64-bit.

  Please help us :-)

  You have installed the updates recommended by Tempro?
  You can send us you have installed versions?

  I assume that with the old versions you didn t have this problem?

• Re: Portege R500: controller button does not work after you install the update

  After you have installed the latest version of Toshiba Value added Package, the two buttons (toshiba assist, and backlight power) do not work properly: they open instead a window of Firefox.

  I guess there is something to configure in the section "Optimizing" Toshiba Assist.
  When I open the program "Toshiba buttons functions" (sorry for the puny, Spanish translation, it is called: "functions of Toshiba botones") all entries are empty and I have to enter the Url of the program supposed to turn off the backlight of the screen of my LCD...
  I have no idea where to find this executable.

  Can someone help me?

  Why you n t use the OS restore option?
  The operating system supports the option of system restore and this helps to put the system in the previous point.

  Check, maybe it helps to get the old version of the Toshiba Package Value added.

• Propeller: Graphics distorted in Windows applications after you install the latest version of the graphics driver (3643)

  After downloading and installing the latest graphics driver for lenovo support pages (10.18.10.3643) I noticed that some graphics in Windows applications are distorted. Generally, it looks like a refresh or memory problem. If you start the application that everything is OK and after using it awhile (or switch to another app and back)

  For example, Onenote radial menu looks like this:

  

  Where is should look like this:

  

  Over time, it could get worse, as the entire application has problems how to freshen up, or this menu does not lose only icons, but also the colors, etc..

  I tried to reduce the demand for resources by disabled anti-aliassing, but it does not help.

  Normal windows applications do not have the problem and friendly resource (for example not chart orieted apps) takes more time to show the same behavior.

  It is 'just' a bug in the driver, or y at - it shape a setting I have to solve this problem?

  Thank you

  Ruud

  the version that the system put in place after unistalling the last display dirver is:

  Version: 9.17.10.3190

  Dirver date = 20/06/2013

  = Intel driver provider

• No standby on MacPro after you install the security update

  10.10.5 Yosemite system

  MacPro early 2009 (4.1)

  2015 security-006 installed by download file update

  Problem now:

  No Sleep Mode more via

  -Button at the login screen

  -Apple menu

  -Parameters in the Pref Pane

  -Shortcut

  This is what happens:

  Screen goes to sleep but

  -fans are always

  -HDs turn

  -Boot HD work sounds

  -small power light is not 'breathing '.

  What I've done so far:

  Resets do

  -Energy records Standard parameters

  -MSC

  NVRAM EXTRA

  Started in Mode safe

  Tested on a fresh user account

  Repaired access rights

  Results: No "standby"

  Secuity update version before was 2015-003 or 004.

  Sleep Mode worked without problem.

  I took the same file to update two iMacs (2009), an iMac (2014) and a MacBook Pro (2011) - no problem.

  Suggestions for Restore Mode features Eve for the MacPro would be great.

  Thank you

  Wipe the drive and reinstall OS X properly:

  Install or reinstall OS X from scratch

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Erase the drive:

  1. select in the main menu disk utility and click on the continue button.

  2. once the charges of THE select your boot volume (usually Macintosh HD) in the

  list on the left. Click on the Erase tab in the main window of THE.

  3. set the type of format Mac OS extended (journaled). If necessary, click

  Security and button all the option data from scratch in a single pass. Click

  the clear button and wait until the process is complete.

  4 leave FROM and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the install button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible

  because it is three times faster than wireless.

  This should install the version of Mac OS X that you had installed it.