XP does not burn cd inmedia player

Similar Questions

• Qosmio G50 - 115 - DVD drive does not burn anything

  Recently tried to do a recovery plus two discs but the player refused to burn but come with 0E01B5-26-2AO444D9 error Code.
  In fact, it does not burn anything but will play.

  Hello

  Have you tried different CDs and DVDs from different manufacturers?
  You must proceed as different disks from different manufacturers are not 100% compatible.

  I had similar problems, burning data to CDs or the different DVD
  Then I tested the drives from different manufacturers, and that was the key!
  Everything worked properly!

  I made good experiences with disc Verbatim and TDK R (CD and DVD)

  I think you should also test some discs

• H8XT does not start a DVD player

  I recently bought a H8XT and I want to do a clean install of windows 7.  The DVD drive seems to work very well and I used it to create the recovery discs already.  However, when I try to boot from the DVD drive, the boot in the bios menu does not show the DVD player.  I t shows a generic drive called "ATAPI CD/DVD Drive.  Even when I try to choose that it does not start on the DVD, it always starts on the hard drive.  I have this research group and found a position with a similar problem to mine.  Here it is:

  http://h30434.www3.HP.com/T5/desktop-operating-systems/computer-won-t-boot-to-install-Windows-7-full...

  The solution for this post was to clear the CMOS.  However, my motherboard is not exactly like the one shown in this post, and I can't figure out how to clear the CMOS memory.  In the 'Clear the CMOS' link in figure 4, it shows 2 jumpers on the right side of the 6-pin.   In my system, 2 riders are on the left side 6 pins.  Any help would be appreciated.  Thank you.

  Thanks for the suggestions.   It turns out that when I burned an image of windows 7 on DVD, it does not burn properly and is not bootable.

• create dvd Windows does not burn music and slideshow

  Windows 7... When I add the photos and music I can listen to samples and it is great. But after I burned the dvd and go to replay theres no music. the first time I did it, he put some music with it, but I changed some of the music and he burns the original stuff I had on this subject, not the new. Help, please

  I started all over from scratch, and it does not burn any music now.

  Hi tcfs,.

  Welcome to the Microsoft community. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. what application did you use to burn the pictures and music?

  4 you get an error when you are unable to burn music on the disc?

  I suggest you to refer to these articles and check if they help.

  Burning disc for Windows 7 tips: http://windows.microsoft.com/en-US/windows7/Disc-burning-tips-for-Windows-7

  Burn a CD or DVD in Windows Media Center: http://windows.microsoft.com/en-US/windows7/Burn-a-CD-or-DVD-in-Windows-Media-Center

  Windows Media Player, frequently asked questions: http://windows.microsoft.com/en-US/windows7/Windows-Media-Player-frequently-asked-questions

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Portege R100 - does not start from CD player

  I have Toshiba Portege R100. I want to format and start all over again

  I use killdisk, excellent utility program, normally takes place the disc cd but the machine does not start from cd player, even when it is said in the bios, it says 'error of cable' & drive still works fine when the system is installed & running

  I want to remove unbuntu & just xp, thought that I would start plus-plus easy or simply to remove unbuntu?
  If remove unbuntu, how can I do this?

  Best regards, TIM

  Hey Buddy,

  If you want to have XP only, try to boot from a XP disc. You can format the drive HARD whole with XP disc that even Ubuntu is installed. I put t understand why you use another program to format the HARD drive

  Then boot from a XP disc and follow the instructions on the screen. If it doesn't work, it seems to be the material of your player to malfunction.

• Satellite L30 PSL33E: After downgrading to XP DVD-RAM does not burn

  My laptop (Toshiba Satellite L30 PSL33E) provided with Windows Vista but it is very slow with this OS and one of my friends downgrade my OS XP.
  But now my DVD-RAM does not burn!

  Install the driver DVD - RAM Toshiba v the European driver Toshiba page 5.0.2.5

• Equium A60: Does not burn the DVD?

  Hi all

  Ive had my phone for almost a year now and for some reason any dvd drive does not burn the DVD, it burns cd perfectly but when it comes to bruning DVD it says that nothing is in the drive...

  Ive tried Philips DVD + RW and DVD + R Sony but still no luck, I know that for some DVDs, you must first delete it, but the drive is not even delete them... On the drive, his engraver of DVD multi and the rewritable clearly marked... so am confused at why his does not work... Ive also tried to use Nero to burn DVDs but no luck

  Any help appreciated thanks

  Ammunition

  Hello

  What s on DVD-R and DVD - RW?
  I also suggest trying different brands of DVD.
  Generally, you will find a list of DVDs and CDs, tested and compatible media in the user manual. Check it out.

• Software Sonic does not burn DVDs on Satellite 105

  Hello

  I have a few movies that I downloaded via Windows movie maker, but did not burn. I edited movies with all the works, I was able to burn using CD disc, but does not burn with a DVD-R disc.

  My other attempts involved using the pre installed Sonic DVD maker software, but I couldn't transfer my films to the library of windows movie maker (WMM). How can I do this? I tried to import the movies, but the Sonic would be important only videos found in the "My videos file", I transferred a movie in my video folder and was able to transfer it to the sound library, however, I couldn't find a way to edit the video, the software Sonic does not appear to guide you on the steps to do , in contrast to WMM.

  Any comments would be greatly appreciated since I've lost too many CD drives already.
  See you soon

  Hello

  I put t know if Windows movie maker is able to burn on DVD s. I presume that it s is not possible. I checked the WMM options and it seems it is only an option called save on CD and nothing on the DVD.

  I don t use Windows movie maker but another application called Nero burning ROM.
  It really great software s. I installed some add-ons and I can create DVD movies and play with the DVD drive simply.

  I recommend to check and test the Nero!

• L750D satellite does not burn CD

  Whenever I try to burn a cd using I tunes or nero my hard drive will be cick make noise that it is looking for a drive, but it does not burn the cd, then guard asks me to insert a blank disc and I've tried many discs and I get you answer.

  Anyone has any ideas at all?

  Hello

  You have the same problems of burning DVDs / CD?
  How did you notice this problem?
  It seemed after installing iTunes?

  I had some experience using the iTunes (now I m using Android?)
  However, in my case, the itunes software messed with the registry.
  I don t know why, but after itunes was installed my software butted another was not able to manage disks.

  In many cases, I uninstalled itunes, cleaned the registry and removed the filters upper and lower of the following registry entry:
  HKEY_LOCAL_MACHINE \SYSTEM \CurrentControlSet \Control \Class \{4D36E965-E325-11CE-BFC1-08002BE10318}

  I restarted and can burn the discs

  However, it is also possible that's not a solution for you. It is possible that the laser lens cannot read disks, this could be caused by the lens of clean soil with piece of cotton and alcohol sometimes that helps too

• I have a new laptop with Windows Media Player 10, which does not recognize my MP3 player: this has happened once before and I was able to download Windows Media Player 9. Where is he now and can do it again?

  I have a Samsung YP - U2J MP3 player and until I had to buy a new laptop it worked fine with Windows Media Player 9.  The new laptop comes with Windows Media Player 10, which does not recognize my MP3 player that my COMPUTER recognizes it and says everything is fine.  Can someone help me?

  Hello Amaliada,

  Thank you for your message.  We will add your MP3 device manually.  Please follow the instructions below:
  Plug in your mp3 player and open Windows Media Player.
  Click in the empty space (next), then select 'Tools' > select 'Options '.
  Select the "Devices" tab (you see yourself mp3 palyer?) If not, click on "Add" > select "portable music players.
  From there, you will receive information about the addition of your device.

  Please let us know if it did or did not help to solve your problem.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• burner CD/dvd does not burn but plays the media on drives

  I tried to burn music on a blank cd but it keeps opening the cd/dvd tray and invites me to insert a blank disc. I also tried to burn a movie I would have done on a dvd, but does not recognize the blank dvd even though it's brand-new. He seems to be able to play CDs and CD-ROMs, but does not burn. pls help. Don' don'tknow what else to do. I already uninstalled the cd/dvd drive and installed again, no dice. Thank you!

  Hi mamiskorason,

  The following suggestions may be worth looking at:

  1. run the automated Microsoft Fix It's that automatically diagnoses and fixes common CD burning issues.

  The problems of the CDs or DVDs

  2. in addition, please go through the various other suggestions in the article below.

  Troubleshooting the CD or DVD in Windows Vista drive problems

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I bought the Adobe Photoshop CS5 and Lightroom 3 on a CD. However, I now have a 3 Surface Pro who does not have a CD player. Please give me a way for software downloaded from the internet. Thank you.

  I bought the Adobe Photoshop CS5 and Lightroom 3 on a CD. However, I now have a 3 Surface Pro who does not have a CD player. Please give me a way for software downloaded from the internet. Thank you.

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  IF Windows 10 read below

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  - so if you have an older program, update you to Windows 10 at YOUR risk of problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -IF not, Details of the message from the error messages and a person may be able to help (just not Adobe)

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign permissions... said FULL yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• I bought CS5 on a CD for a long time for my windows 7 PC and I now want to put on my new iMac Yosemite that does not have a CD player running. Can I download it from adobe or from the app store and use my original serial number?

  I bought CS5 on a CD for a long time for my windows 7 PC and I now want to put on my new iMac Yosemite that does not have a CD player running. Can I download it from adobe or from the app store and use my original serial number?

  You can use it only on a Win computer. If you had CS6, you could do a platform Exchange but not with CS5. Here are the details of the exchanges of the platform:

  Exchange a product for a different version of the language or platform

• Media Player does not burn audio discs

  When I try to burn an audio disc, I get a message saying that Windows has a problem (unspecified). This does not happen if I burn a data disc.

  I have Windows Vista (Service Pack 2 installed recently). Following the advice I reinstalled the drivers from the chipset (laptop Advent 6311). This does not solve the problem. What should I do?

  Hello

  You can try to disable and enable the Media Player Control Panel.

  Steps to disable Media Player.

  (a) click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) to develop media features and uncheck the box next to Windows Media player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

  Steps to activate the Media Player.

  (a) click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) to develop media features and check the box next to Windows Media player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

  Thank you.

• Media Player does not burn the audio (wav) files on the disk, or play "" CD error ".

  Media Player was working fine until recently. Now when I hit the button "Start burn" the burn starts momentarily, the time of the audio files is displayed, but when I insert the CD in the drive, it reads 'CD error' and there is no sound. I recently installed a new security package (Webroot) but none of my other software has been affected. Tab of computability, I noticed that it is set to windows 95 (I have windows 7), but the program does not allow me to change it. I checked for driver updates, but the computer says that all drivers are current and the device works correctly. any help would be appreciated. Thank you.

  Hi Mike,.

  I suggest you to change the settings while burning the files using Windows Media player.

  Check out the link to do so:

  http://Windows.Microsoft.com/en-us/Windows/Media-Player-CD-DVD-burning-settings#1TC=Windows-7

  For troubleshooting further, you can also follow the link suggestions:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-Media-Player-error-while-burning-CD-help/24026285-bebd-4b2d-beb2-77ff50b88030?page=1

  Please let us know if the problem still persists.