Scanning for printer e-all-in-one HP 6510

Similar Questions

• USB cable for printer C6200 all-in-one

  Just bought this printer.

  can someone tell me if the cable required for this printer is just a USB 2.0 basic cable?  Need to go buy a.

  Thank you and I look forward to your response.

  ... Bruce

  The right USB cable is a USB Hi-Speed A - B cable. I will attach a picture of it to avoid confusion.

  

• Cannot connect HP printer photosmart all in one single 6510 with my windows 7 Home Edition PC

  Stuck!  Help, please.  I' ERVs uninstalled and reinstalled several times: restore PC previous working time. check all passwords and IP addresses.  Wireless network connection (group home) - says that it cannot connect to the top by evenb wireless, if it says printer is connected to the internet, as is the PC.  USB connection, it blocks on the drawing of the ethernet connection.  PC does not accept updates - they all fail.  Last week I had no such problems.  Rolfus

  FIXED!  Go back and do a «how to perform a clean boot in Windows»  Follow the prompts long enough and a bit complicated.  This will also solve the problems of a number of HP users with various issues.  Rolfus

• Printer e-all-in-one PHOTOSMART 6510. Windows 7 64-bit.

  Printer will not the photo tray pick up. Print screen set at 4 x 6.

  Hi bpond321,

  What application program you are trying to print photos from?

  Follow the steps below in your printing application

  1. click on file in the upper left corner of the application (step 1)

  2. click on print (step 2)

  3. ensure that the Photosmart 6510 is the selected printer and click on Preferences (step 3)

  4. click on the drop down menu arrow on the paper size to select 4 x 6. This should change the paper Source for the Photo tray. If it does not change, you will need to select the Photo tray. (Step 4).

  5. click OK in the screen printing Preferences and then click on print in the screenshot.

  Let me know if this helps solve the problem?

  

• Re - install the software for the printer C6280 all in one... get a "file not found" error message

  you need to reinstall the software for the printer c6280 all-in-one. Downloaded the last installation on HP web site package. During the installation process I get an error message... Unable to find user/appdata/local/temp/7z256315/setup/...setup/blocksysuser...

  the 7z256315 folder does not exist on the hard disk.

  I also have a message that it cannot find PS_A10_02_software.msi.

  Windows 7, C6280 printer all-in-one. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via the wireless to the router.

  I hope you can help

  Thank you

  Charlie

  Hi cberistain,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77039-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 3645097 & sw_lang=.

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print and scan?

• PSC 1350 all-in-one: HP Director for PSC 1350 all-in-one - using Windows 10 (64-bit)

  Hello!  I recently had a new hard drive installed on my Samsung laptop year-and-a-half-year-old, as well as 10 (64-bit) Windows as well. Instead of using the original installation disc for my printer range all-in-one HP psc1350 (bought 1/2004), I have used your site and just did a download tonight HPPIW. EXE .  My question is: I do not see the original HP Director on the desktop now after the above file download. The copying, printing, scanning are all working well, if that's fine! So all the "Director" now wonder, if I can get in a way that - since the original my installation disc or HP support Web site? Thank you, CR-Issquah (26/08/2015, 21:00 - PT)

  Hello

  HP Director has been supported only for your printer up to Windows XP, since Windows Vista full features software is no longer available for your printer, and there is no HP Director application or provided HP solutions Center.

  You can follow the following document which lists no available workaround solution and the limitation of the provided solution:

  http://support.HP.com/us-en/document/c04740294

  Shlomi

• Photo Gallery is ID not a scanning device (HP Deskjet all-in-one).

  Photo Gallery is ID not a scanning device (HP Deskjet all-in-one).  Always before A.
  Under Vista, updated on an HP laptop.
  Already checked for printer is installed and works properly and for updates of device driver and the computer restarted.
  Help?

  But... not the same question... the next Document in HP
  maybe worth a visit:

  HP printers - Scan button on the
  Printer does not work properly when
  the printer is connected to a Windows
  Vista computer
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809848&LC=en&cc=us&DLC=en&product=303756&rule=23585

  You may be able to find additional documents to the service the customer of HP:
  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en and... It may be interesting to try to uninstall/reinstall the drivers of all-in-One.

  Also... If it is a recent issue, it may be interesting to try to make a system
  Restoration of some time before he started.

  Windows Vista - system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Good luck...

• Installation printer A920 all-in-one

  I just bought a used, refurbished OptiPlex 755 PC with Win 7 OS and am trying to install my all-in-One A920 printer. This is the printer that came with (my Dell Dimension 2400 series) desktop I bought about 7 years ago. I downloaded and installed (or so I thought) a Vista 64 bit driver I've read on the Dell website is supposed to be compatible with my Windows 7 64-bit OS. I plugged my printer and opens the file. I thought it was going to guide me through the process of setting up, but he did not. My computer recognized my printer, and he let me even in the all-in-one program. I was able to scan a document in color (but it wouldn't let me save it), I was unable to copy or print documents, and the "empty cartridge" box came up saying that black inkjet cartridges and color were empty; they are not empty because I recently replaced both cartridges. I miss any step, or not to do something in the right order? The printer does not give me a lick of problems on my Dell PC with Windows XP. I don't want to have to buy another printer, if possible, any help you can give me would be appreciated! Thank you! p.s. I have not loaded MS word on my new computer, so I wonder if this has nothing to do with the printer does not. (??)

  monksplay,

  The procedure is listed below. The OCR program, found on the disc from the printer, is required for scanning documents and fax.

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download the 32-bit drivers for Vista for Windows 7 32-bit or 64-bit drivers for Windows 7 64 bit Vista. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Owners of printer inkjet all-in-one Dell A920 thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Rick

• HP psc 1210 printer v all-in-one

  I'm missing a driver for my hp psc 1210 printer v all-in-one.

  I can't print from my desktop pc to Windows 7 on my printer.

  Printer works very well to plug into the wall for printer - will make copies just fine.

  Computer added my default printer - that part is fine.

  When I try to print from the computer to the printer, I get a message saying the printer is waiting for 1 document waiting to print, but it will not be printed.

  I tried to unplug the USB cable and plug it into another USB port, but it does not work either.

  Tried the Printing Troubleshooter?
  http://Windows.Microsoft.com/en-in/Windows7/open-the-printer-Troubleshooter
  If this does not help, try this procedure by Arthur Li [MSFT]:
  Clear printer spooler files and activate the Spooler Service
  =================================
  1. click on start, type "Services.msc" (without the quotes) in the search box and press ENTER.
  2. double-click on "Printer Spooler" in the Services list.
  3. click on stop, and then click OK.
  4. click on start, type "% WINDIR%\system32\spool\printers" in the search box and press ENTER, remove all files in this folder.
  5. click on start, type "Services.msc" (without the quotes) in the search box and press ENTER.
  6 double click on "Printer Spooler" in the Services list.
  7. click on start. In the Startup Type list, make sure that "Automatic" is selected and click OK.

• Cannot find driver for HP 2710 all-in-one anywhere that works.

  I read the questions / answers on the printer drivers for my new laptop with Windows 7 and it seems that nothing is exhists for my HP 2710 all-in-one.   The driver that Windows only supports the printer, not the scanner or fax.  Many answers recommend to contact HP for the pilot, but HPs response is to use that Microsoft has in the computer.

  I don't know why Microsoft Gets a complete driver for this popular all-in-one printer.  My new Mac Book in their OS and it will interface with all functions beautifully.  He finds the printer, scanner and fax and installed the flawless drivers.   Now that I bought a PC even once, it's frustrating to find that Microsoft has yet to produce a stable product compatible XP that was at least good support with software companies and hardware.   Should I really buy all new software and equipment to own a PC these days?

  Just in case where you were not already in the running of it here is a link to HP described as workaround to make the scanner and fax from the HP 2710 works with the driver included in Windows 7:http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796736&lc=en&dlc=en&cc=us&os=4062&product=420428&sw_lang=&key=null&site=null#N341

• What should I buy to re - install my printer Dell all-in-One A960 Windows 8 after Windows XP?

  My printer Dell all-in-One (purchases. 2004) has stopped working.  When you try to use, sign popped up "print spooler service does not work? This has happened a month after that I switched to Windows 8.  Dell said there is no software for this printer be re-installed Windows 8 and suggested that I buy a different printer.

  I don't think that Dell should have the last word.  Any advice?  Can I buy drivers, other software?

  Thanks for your information.

  I suggest to try this:

  (1) unplug the printer from the power point

  (2) connect one end of the USB cable to the printer (if it is not already connected)

  (3) connect the other end to the machine using any free USB port

  (4) turn the printer by plugging the power plug

  (5) look at the screen to see if Windows indicates all compatible drivers

  If this does not work then try to look for Windows7 or even Windows Vista drivers and then install. However, make sure that these drivers are from the DELL website if possible)

  Good luck and hope it works.

• How to adjust the brightness and contrast for Compaq Presario all-in-One CQ1-1007 D desktop PC

  How to adjust the brightness and contrast for Compaq Presario all-in-One CQ1 - 1007 D desktop PC? THX.

  There were buttons No. brightness and contrast on the front of the monitor-no onscreen menu.

  On your desktop,.
  Right-click to select graphic properties->

  in display settings, click Advanced settings
  Here you go, you can do almost anything with the brightness

  Hope it helps

• I don't remember the name of softerware for my HP All in one Printer

  I have a HP J4580 printer. I had my recently re-created PC. I don't remember the name of the software that I had which had all my functions in it. Scan, copy, e-mail, fax, percentage of printer cartridge.  Nobody know, don't forget the name of this software?

  Hello

  Could be the HP Solution Center or HP printer Assistant. Please select the operating system for your software features full doanload computer and the driver from the following link and install it on your computer:

  http://support.HP.com/us-en/product/HP-OfficeJet-J4000-all-in-one-printer-series/3645081/model/3645099/drivers/

  Kind regards.

• Can not scan using Savin 8045 All In One printer/copier/scanner

  Original title - scanning problems

  I connected a Savin 8045 All In One printer/copier/scanner of my Dell Vostro 470 computer via a cat 5 cable and router. It prints wireless and locally but not scan.

  Hi TomMargiot,

  To provide the proper resolution, I would need more information on your side.

  1. which version of the operating system are you using?

  2. do you receive any error messages?

  I suggest you to uninstall all in a printer\scanner\copier and install it again and check if it helps.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  If the problem persists, I suggest you to contact the Savin Support for assistance.

  http://www.Savin.com/global/support.aspx

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• No function of scanning for Photosmart C4280 all one after updating to Mac OS x Lion

  I downloaded the update day and new drivers, either, Apple and also the drivers of support.apple.com noted elsewhere in this forum. and the function of the printer worked very well for a usb connection of airport network, but the scan function disappeared. There is no scan.app in the Hewlett-Packard folder and there was before. In theory, the scan function should be networked through the airport like the function of the printer, but I was never able to get there. Now, no function of scanning even with usb directly to the computer. Please, please help. I'm going crazy here.

  Hello

  First of all, the printer connected by USB thrugh airport should provide print you only the functionality, it provides no functionality of scan.

  As you can find below, only print sharing feature described by specification from Apple:

  http://www.Apple.com/airportexpress/features/printing.html

  Then, while the printer directly connected by USB, you should be able browse Iamge Capture.

  There should not be any folder Hewlett-Packard, the scan functionality provided through Capture of Image as a complete software not available for operating system features.

  Please follow one of the options below to find how to scan using Lion:

  http://support.HP.com/us-en/document/c01910186

  If you are not yet able to scan, install the latest drivers for printer HP package and try to scan the image:

  http://support.Apple.com/downloads/DL907/en_US/HewlettPackardPrinterDrivers.dmg

  Please let me know of any questions,

  Shlomi