XP mode can not access to any computer on the network
Have Win7 with the virtual machine running in xp mode. I can not connect to any computer xpmode netwok. In Win 7, that it connects very well. I tried to create the "WORKING group" and several other names on all computers and are still in xp mode no other computers. If the computer xpmode appear to any other "Access is denied" is displayed and then it never appears again. I set up a Win 7 running in xpmode before and had no problems.
Internet connection works fine all the time.
Configure XP Mode PC network settings to use the host computer's network card. For more information, see Windows 7, XP Mode network settings . Boulder computer Maven
Most Microsoft Valuable Professional
Tags: Windows
Similar Questions
-
I can not access my old computer (as the School technicians he reformatted before you disable Adobe Acrobat Pro XI). What is the procedure to contact someone for help closing cat?
your message here and the CAT are your two options.
Contact support Adobe by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html
-
computer hp laptop 15-r200nq: can not contect to any hp 15-r200nq network
Hi I have this during two days, and I install win 7 and 8, in both cases I have won a few errors in the Device Manager cannot find the network controller, can not conect with WiFi.
I tried all the drivers I found on the hp site, but none works.
I didn't kno what to do.
Hello:
You need these drivers wireless and bluetooth for this model of the wireless card...
-
Do not share my XP computer on the network
My XP computer does not show up on my network. All other computers show and can share files and printers. I enabled sharing and printers. Is there any setting I can change to enable sharing?
Hello
Maybe this can help.
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .
Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspxSetting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357
In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.
http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab
When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
-
B210 - tried to reset the default values. default IP address does not connect to the network with auto that IP had to manually set IP addrtess something similar to the properties on the zone reactive verzion. can not disable web services - never activated.
no primary or secondary DNS server. not sure if this is problem. can print ok via network.
I used the manners of address google DNS gave you me and it connected to the web and downloaded the updates and gave the address of e-mail. I t may have had difficulties as the gaveme just of the printer a message that he could not reconnect. not sure about that. Another question please. Do I need a setting WINS? I'll try an email print from a different network. Thank you
-
I'm running an iMac mid-2007, with El Capitan updated 10.11.2 and Mail I think 9.2. 2.4 GHz and 4 GB of memory.
My problem started yesterday when I wanted to send a letter from Christmas to 32 people, activating a project and try to send it. Didn't happen, and then things started to get strange.
This AM. After the update to EC 10.11.2 I tried to load Mail. The program seems open (i.e. the bar at the top - file, window etc.) but no viewer will appear. No e-mail does appear, now or otherwise. Have tried everything I know. Restart the iMac. Close and open Mail. Nothing.
Any suggestions?
Rob
Please stop Mail. Force quit if necessary.
Back up all data before proceeding.
If you use OS X 10.11 ("El Capitan") or version later, triple - click anywhere in the line below on this page to select:
~/Library/Mail/V3/MailData
If you use an older version of OS X, use this line:
~/Library/Mail/V2/MailData
Copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select
Go ▹ go to folder
in the menu bar. Paste in the box that opens by pressing Command + V, then press return.
A file window opens. In it he must be files with names as follows:
Index of the envelope
ExternalUpdates.storedata
Move these files to the desktop, leaving the window open. Other files in the folder can have names more long that begin as above. Move these files, if any, in the trash.
Mail recovery. It should invite you to re - import your messages. You can get a warning that the index is corrupted and that Mail must quit smoking. Click OK. Generally speaking, the process takes a few minutes, but this can take hours if you have gigantic mailboxes. In this case, you will be able to speed things up temporarily by adding your file to the list of personal information protection in the Spotlight preferences pane. Remove it when Mail has finished importing.
If the import operation stalls or fails with an error message, quit Mail, delete the two new index files (maintenance of the original that you moved to the desktop) and try again. According to several reports, the second attempt can succeed if one does not.
Test. If Mail now works as expected, you can delete the files that you moved to the desktop. If not, post your results.
-
My old XP, I put my images specifically to not allow other users to see my photos. The hard drive crashed and that hard drive is now in a new Windows 7 computer. I went through the steps of the ownership of the file and the 'My pictures' folder and it is still not allowing me to open all images. Help, please.
Hi Armen has,
· What is the full error message?
Follow the steps in the article.
How to open a file if I get an access denied message?
What to know before applying permissions to a file or folder
-
I can not access my old computer, need to disable its key to release a seat.
This is the web adobe cs3 suite.
Hello
If it is a retail license, purchased directly from Adobe, you can contact us at the Support from Adobe for assistance.
If it is a volume license purchased from the dealer, you can download the product from the link as follows CS3 installer and activate the product with the serial key you have.
Download Adobe Creative Suite 3 products
Thank you.
-
Can not access Google accounts. Tried the suggestions. How am I "host" Google?
Trying to access my Google accounts and get the message about a problem with my cookie settings when I try to connect. Cookies are enabled, and I followed the suggestions to clear the cache and cookies. Does not help.
How can I configure my privacy to 'allow' Google.com?
Any help appreciated, thanks.Hello, please also try other steps mentioned in the Web sites say cookies are blocked - pledge and also make sure that you do not use addons or external security software which may interfere with firefox "the management of cookies...
-
I can do very well on Firefox, but I can't when I use the site on Google Chrome. Reached there last night, but for some reason, it does not work now. I can connect there, but that's all I can do.
Anyone else encounter this problem on other sites? I tried to clear my cache/cookies, nothing helps. I don't know what I can do for this address. So I'm quite frustrated. I also restarted my computer which he stopped a little (not reactive part), but it starts up once again today, with this other little wrinkles. And finally and above all, I uninstalled and reinstalled to see if it helps, and it didn't.
Any help would be appreciated - thanks.
PS: I posted this topic forums of Google Chrome and did not help, so I am trying here, as you guys seem to be more on the ball when it comes to customer service.
No problem :).
WARNING: from ehow.comHope that it helps out you. -
Receipt used iPhone 5 as a gift, but can not access iCloud account to clear the phone.
Hey Apple community. I recently got old iPhone to my uncle 5 as a replacement for mine, but he still all of its data on this subject. The email associated with the account is no longer active, he does not remember the password or the answers to security questions. I have no way to remove the phone bill, or in any case to disable find my iPhone so that I can factory restore. What should I do? Is there anyway to use my new iPhone? I would like to give any info that I can to be able to use my new phone. Thank you!
Tell him to contact the account of Apple security team or with her and his original receipt to a physical Store. If none of these methods work, you will not be able to use the iPhone.
(139031)
-
Re-installed XP Pro. Now can not access data dynamic disk on the HD 2
Hey all. Good here we will...
My system has TWO SATA drives. A year ago I converted both Dyamic discs thinking I could use them in a RAID, but decided to do it. So, since that time I am using OS + critical data Disk1 and Disk2 as a backup (compressed image of Disk1).
My question is now, I have re-installed XP Pro on disk 1 and my computer does not allow me to see the data in Disk2. XP Pro detects disc 2 as "base" and asks me to format it. However, my BART PE bootdisk shows 2 disk as dynamic and he can't read.
This is where I am. I'm trying to understand how to read data from disk 2. Whether some use of software 3rd party or a way to get XP Pro to see the data.
Check the knowledge base on best practices with dynamic disks.
http://support.Microsoft.com/search/?adv=1
For example.
http://support.Microsoft.com/kb/329707"Dynamic disks use a private disk region to maintain a logical disk manager (LDM) database, which contains the types of volumes, offsets, memberships and the drive letters of each volume. The LDM database is also replicated, so that each dynamic disk knows about every other dynamic disk configuration. This feature makes dynamic disks more reliable and recoverable than basic disks. »
You suggest that your second drive can still have a copy of his information LDM. In other words, as long as you did not "commit a sin" as defined in this article.
See 'import records' here and see if 'Foreign' is displayed for the drive in disk management.
Disk management is where you want to look for info on the disc.
http://TechNet.Microsoft.com/en-us/library/bb457110.aspx#EEAAAnother response of the community of Windows XP newsgroups
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Client can not access adobe to editing in the browser via an external server
Hello
I have completed the customer site of Muse and have downloaded on its external host without problem.
In the site properties, enable editing in the browser is on.
When I use the same external ftp site you want to connect, I get this:
As my clients technician COMPUTER hosts many sites, I asked him to create a unique login for my client.
If I try to upload the Web site by using this single connection, it is said that the 'folder does not appear to connect to site' & is not that recent changes are not displayed.
Technician COMPUTER does not know what else to do...
I'm a designer using Muse, as I have almost no idea re.code. Please can you help me?
See you soon
Could you describe a little more how you or your customer download site?
With most FTP servers, in order to download your Web site correctly, you must set the name of the subfolder on your server, as the root of your FTP space is probably not the root of your site. On most of the servers, it is a folder named "www" or "htdocs" or another mysterious name.
-
Windows 7 can not connect to Hplaserjet 2430TN via the network
.
I'm going to have a problem with my windows 7 Home Premium 64 Bit and my HP laserjet 2430tn than. printer networked through a concert switch 24 ports Linksys. I have only my PC a server and my children 4 PC on the switch. Oh and my printer has a static IP address with the rest of the DHCP of the computer.
Everything went well on my Windows 7 box until I tried to print to the HP and the work just hung in limbo. I deleted and gone with no luck.
Once the Windows 7 box returned the printer skewered on that I printed before. Tried to print again no luck, repeated above market. It has gotten to the point where I removed the printer and tried to add the printer but 7 does not detect that there is a printer to this IP (192.168.1.50). In my workgroup, I can ping the printer from my pc and never another PCs. I can even web to the printer and to the Jetdirect firmware is up to date.I installed the printer on an XP via IP machine and it works fine. Windows 7 sees it as a shared printer, but I do want to share from another machine.
Do not forget that it was all work for a few weeks until very recently. Any help would be appreciated
Message edited by hondaman12 on 11/17/2009 15:19I got it. Default IP IPv4 was changed to default IP instead of IP of the legacy. Not sure why it caused problems.
Message edited by hondaman12 on 11/17/2009 17:10
Maybe you are looking for
-
How can I access music on iCloud notes?
I recorded a dozen or so ideas of song with notes of music back in May and have just recently found little time to get back at them. I launched the memos app music and none of my ideas are shown under the icon of music library a high Center. After a
-
Need audio drivers and modem for Tecra A6
HelloI couldn't find the drivers (audio + modem) Tecra A6 EZ6411 for Windows XP SP2 home edition.
-
I'm looking for my upgrade product key to Win10?
I use a Satellite 10 P50-B-q PSPNUE. Upgrade to Windows 10 wonder 8.1 Windows product key, which I did not. All packaging of my Toshiba and also the laptop does not show the typical Windows license product key seal. Gives me a resonable key to retrie
-
I have a 1062 q chassis that runs 15 deg Celsius warmer than another chassis in the same system
I have two 1062 q rack-mounted chassis and a running 10-15 degrees hotter than the other. I all the filler panels and have removed the chassis on the grid for the outdoors. I still see a difference in important temperature even when the chassis is
-
How to transfer a file from the Microsoft Works word processor documents