XP SP3 ff18 start with a heating-report for the administor

Similar Questions

• When I start with Windows XP Home Edition, the screen appears, only the mouse arrow. Help!

  When I start with Windows XP Home Edition, the screen appears, only the mouse arrow.  Help!

  Hi stevejager,

  ·         Remember to make changes?

  ·         You receive an error when starting?

  ·         Have you tried booting in safe mode?

  Method 1: First of all, we will try to start the computer in last good known Configuration and see if it boots.

  Method 2: If it is impossible to start, try to start in safe mode. If able to start and then try to perform a System Restore, since this is a recent problem that has occurred.

  Method 3: Follow the steps in the below article mentioned.

  Computer stops responding with a black screen when you start Windows XP

• Windows 7 starts with a black screen (since the last update), if I go to the Task Manager.

  * Original title: startup error

  Windows 7 starts with a black screen (since the last update), if I go to the Task Manager and processes there are 2 sessions of "run once container" if I stop or another (they are two different size) windows lights up normally.

  Can someone help me please?

  Hello

  Thank you for the information.

  System Restore helped to heal the cause (last option of course)

  not sure about the Windows update that seemed to start the problem, but it is 2 instances of run once Wrapper were running.   I have found that if black screen you started the Task Manager, then selected and close it, either run it once windows Wrappers would begin.

  Anyway thanks for your help, we are now healed.

• problem with my laptop asking for the administrator password or power on password

  I have the same problem with my laptop asking for the administrator password or power on password. It is a compaq presario cq61. It happened when my hard drive failed and was not used for a long time. With the password, any help would be much appreciated. It says system turn off after a few trials with the key: 55427586

  Hello

  Try to enter: 40585508

  Kind regards

  DP - K

• PowerCli script to generate the report for the VM and ESXi model

  Hello

  I'm trying to generate a report for the virtual machines to a domain controller that includes the operating system, Cluster and host of brand and model of ESXi, but for some reason any the ESXi info does not come through. Any help is greatly appreciated.

  Get-data center 'TEST ' |

  Get - vm |

  WHERE-object {$_.} PowerState - eq "Receptor"} |

  Select Name, @{N = "OS"; e = {$_.}} Extensiondata.Guest.GuestFullName}},

  @{N = "Cluster"; E={$_. VMHost.Parent}},

  @{N = 'Esxi model'; E = {Get-VMHost - VM $_.} VM | {{Select model}}

  The virtual machine has the properties of the host.  For your information "Model ESXi" use $_. VMhost.Model, $_ is the current information for pipeline for the virtual machine.  You did for the section "cluster".

• I payd with my credit card for the CC costumes... why can I only download trial versions?

  I payd with my credit card for the CC costumes... why can I only download trial versions?

  Hi APS investment.

  I checked your account and I see that you have subscribed for the creative cloud for teams in which you have a license that you have assigned to the same Adobe ID, but the invitation is still not accepted.

  In order to activate the license, please accept the invitation of your receipt for the same email, then sign on the CC from Adobe and reconnect.

  Sign in, sign out | Creative office cloud app

  Kind regards

  Sheena

• Hi, just sign for a package monthly, received a message from the Bank that I already paid with my credit card for the first month, but I received no email / can not see the plan when I connect.

  Hi, just sign for cloud of plan monthly photoshop, has received a message from the Bank that I already paid with my credit card for the first month, but I received no email / can not see the plan when I open a session.

  There is no serial numbers for products Creative cloud,

  Sign out of Creative Cloud App and sign in the back once

  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  If the trial warning still appears, then make sure your hosts file once entries

  Log, activation, or connection errors. CS5.5 and later versions

• report for the current form

  Hi all
  I want to report for my current form, and I use form 6i
  
  for example I form, which depend on the table and I want to make the button to report for the active form which show some of the field in the table
  Best regards to all members here
  Yasser

  Hello

  If please create when-pressed to release button and use the following code.

  declare
  v_plist_id paramlist;
  pl_name varchar2(50) := 'rep_params';
  
  begin
  v_plist_id := get_parameter_list(pl_name);
  check_param_list (pl_name); --Check availability of paramlist and
  destroy is present
  
  --When the parameter list already exists it needs to be distroyed first
  if not id_null(v_plist_id) then
  destroy_parameter_list(v_plist_id);
  end if;
  
  v_plist_id := create_parameter_list(pl_name);
  
  add_parameter(v_plist_id, 'P_1', text_parameter, :block_name.item);
  -- input parameter
  add_parameter(v_plist_id, 'PARAMFORM', text_parameter, 'NO'); --
  suppress the display of the Reports p-form
  add_parameter(v_plist_id, 'DESTYPE', text_parameter,
  :control.dest_type); -- set file destination type
  add_parameter(v_plist_id, 'DESNAME', text_parameter,
  :control.dest_name); -- set file destination name
  add_parameter(v_plist_id, 'DESFORMAT', text_parameter,
  :control.dest_format); -- set file destination format
  
  -- call reports
  run_product(reports, 'reports_file', asynchronous, runtime,
  filesystem, v_plist_id, null);
  end;
  

  Sarah

• I can't start with Satellite P10 by pressing the power button more

  I can't start my Satellite P10 by pressing the power button more.
  Sometimes, very rarely its starts when I hold the power button for a while say 10 seconds.

  I tested the power supply and a battery to my friends P10 (of the same type) and both work very well.

  So it must be a problem with the key.
  No idea what to do?

  Thanks for any help

  The best.

  Tobias

  If it s a button or a power supply electronic problem, then you can't do anything.
  In this case assistance by the technicians of laptop would be necessary.

  But the next time that you should try this option if the laptop turns on not;
  Remove the battery and unplug the AC adapter from the laptop for about 30 min.

  After this short period of time to reconnect the two parts and check if the laptop could start.

  Good luck

• HP 250 g3: hp 250 g3 does not start with windows 8 ir says the GPT partition style

  HP 250 g3 does not start with windows 8, it is said GPT partition style and custom boot that I have fomarted the hard drive... Please help

  Thnx man always the same thing, but I deleted all partitions and then I was able to start...

• Boot Manager Windows problem asit always starts with a selective startup under the Startup tab

  Whenever I start my laptop I get Windows boot manager options in which it highlights the option of windows 7 and I have to press Enter and continue with this option selected.

  I tried to change my boot options in msconfig, but once again the configuration back to selective Starup of Normal startup. Also I disabled some startup applications, but even changes are not get saved when I restart the system after changes. My touchpad no longer works between the two, and then it starts to work. My left and right keyboard arrows keys do not work.

  My change in normal startup is get back on selective startup.

  Please help me to solve these issues.

  Hello

  It is very possible that this is for the reason that you have corrupted files on your system. System File Checker will scan your system for the missing, corrupt or damaged files. In addition, it will try to correct them. If you have changed the important system files, System File Checker will be - make sure you make backups of them!

  How to run the System File Checker

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  I would also recommend that you run the Startup Repair to the problems that Windows may be displayed when you start your computer.

  How to run the Startup Repair tool

  http://Windows.Microsoft.com/en-GB/Windows7/products/features/Startup-Repair

  Thank you

  Legaede

• choose Start and end in time for the ashes report

  I'm using Oracle 11.2.0.3.
  
  I have sql_id for an update statement, which took almost 4 hours. It took place from 18/04/2013 19:20 to 18/04/2013 22:30 approximately.
  
  I'm under ashes using @$ORACLE_HOME/rdbms/admin/ashrpt.sql report
  
  What should I use to start time and the end time?
  should start on time be exactly when the query started / or before the beginning of the request, or after request started?
  
  If I want to search awr report should I take the snapshot taken at 7 and 11?
  
  Also, is there other reports or query that I should check to diagnose long-running sql?
  
  Thank you.

  spur230 wrote:
  ... Etc...
  What should I use to start time and the end time?
  should start on time be exactly when the query started / or before the beginning of the request, or after request started?

  If I want to search awr report should I take the snapshot taken at 7 and 11?

  Also, is there other reports or query that I should check to diagnose long-running sql?

  (1) If you have pictures of an hour, watch 7-> 11 range o.
  (2) get the SQL_ID of the query which poses problem and use the Advisor of Tunnig SQL (DBMS_SQLTUNE) to identify and resolve the performance problem.
  (3) also, you must consider the plan of the explanation of problematic queries.
  : p

• How to remove all members starting with a particular letter of the outline?

  Hi all
  
  We need to remove all members from any letter of the Essbase outline.
  All members are members of level 0.
  
  Essbase version - 11.1.1.3
  
  Please let me know if it is possible and if so someone can help!
  
  Published by: Sidharth62065 on September 8, 2010 09:36
  
  Published by: Sidharth62065 on September 8, 2010 09:38

  One way to do this would be:
  (1) the dimension on the export in a flat file with outline Extractor. I suppose that a view of level/gen would be preferable.
  (2) create a rules file that rejects all the level zero members starting with E.
  (3) check the box "Delete" unspecified on the reconstruction of the dimension.

  Level e. zero members are not in the rules file, so they are removed.

  I have questions about the data ghosts (level 1s who had all the Es and is now data members of level 0 with the data that you probably don't want) but I'm overthinking it, I suspect.

  Kind regards

  Cameron Lackpour

• To get started with Ajax - how to query the db without 'submit' page?

  Hi guys,.

  I'm building a simple "power point presentation" - essentially a CF page that can display a large jpg [slide]) all n seconds, I want the page to query the db to ask whether it is necessary to change the jpg and as appropriate who jpg to see her now. In this way, we can control the presentation by updating the database on the fly.

  So I think I will reach it as follows:

  1. a 'view' page that contains javascript that fires every n seconds code

  2. that js somehow pass 2 variables (GET?) to an action page (ie the user id and authentication var)

  3. the action page will be the query to the db (using the variables passed to step 2)

  4. the action page returns a result (path to jpg for display) which somehow (?) is passed back to the view page

  5. the view swaps page then the jpg is to show for the one passed to him to step 4

  6. Ideally the display page then also pass another variable 2 action page let us know it has received the update and changed the image accordingly

  I'm fine with all the code html and cfm stuff--where I'm stuck is bit of js, I've had a look through google and do not seem to make any progress so if someone could tell me please in the right direction I would be very grateful.

  Excerpts / very welcome advice

  TIA

  Nick

  As well as the very popular jQuery and prototype libraries already mentioned, ColdFusion uses for its wizardary Ajax extJS library and Adobe also provides the Spry library.  Or you can roll you own and upwards, use the function xmlHTTPrequest() JavaScript.

  But I would like to especially underline that all these libraries using the xmlHTTPrequest() feature and that really, you apply to the server, you use just of to do behind the scenes so that the user does not see this JavaScript.  But in regards to the client browser and the server is what are normal requests HTTP and not different responses so if the user clicked on a link or submitting a form.

• Problems with static IP setting for the port forward through 2 routers

  I currently have cable internet connected to a router (Linksys E2000 w / v1.0.03 firmware). This router is connected to another router, a Linksys E3200 with firmware v1.0.02. In order to correctly forward ports through the E3200, I understand that I need to set up a static IP address on the router.

  I almost followed the steps in this video, but when I enter all the IP addresses for the static IP address settings, it allows me to access the router configuration page. I try to get the new IP address that I gave (which he tries to move automatically once I have save settings) and the connection times out. I am able to access internet otherwise, however. From here, I have to do a factory reset on the router and start from square one.

  Anyone have any ideas? I'm quite frustrated and would like to get ports forwarded so I can get my server properly set in place.

  1. If it has connected LAN - LAN you will need to disable the DHCP server on the E3200.

  2. the best option would be to use the 'bridge' on the E3200 mode (in the latest firmware) and connect the internet port to the main router.

  3. If connected LAN - LAN (or in Bridge mode) all internet related functions on the E3200, including ports are not relevant. There is no need to set up the port on the E3200 redirects. All shipping is done only on the E2000 and nowhere else.

  4. What is the address LAN IP of the E3200? What is the address LAN IP of the E2000?