XPS 13 not installed drive

Similar Questions

• want to 5530: error: is not installed driver for WSD print device

  I'm trying to install the software on the HP Envy 5530 contect to my Dell Windows 7 Home Enterprise laptop runing.  I have installed and uninstalled. use the web and the installation disk but when I check the printer it shows a warning triangle with an exclamation point (!), which tells me he needs in case of a problem.  I get the error "WSD print device driver is not installed.  Please help me.

  I think I tried your 3 bullets without result.  I tried to print wireless HP Center regions, but I'll start over and focus my efforts in this area by the top.

  Seems not a problem of the printer "not found".  The printer Hp Envy 5530 is listed. but shows an icon indicating the troubleshooting is required.  See this link from dropbox http://1drv.ms/1zODxEY

  Having said that, however, when I try to print your word document, I got a message "no printer installed": http://1drv.ms/1AgOqEE

  Bottom line, it is not resolved yet.  Dang it.

  Thanks for your help.  I persevere and hope to get it resolved.  I will answer when I do.

• It is not installed driver WLan - Satellite A205-S5843

  Hi, is Marisa once again,

  I went to get my cell phone yesterday because the technical support has been updated of the MDI. After they have changed, and now I have a new surprise and it s the Wifi driver.

  It is said there isn t any driver installed.
  So my question is if these people need to be updated. they say that they already updated the MDI driver, BIOS and DVD.

  I just want to talk with them and explain everything because I don t think they know what must do and it s takes a long time.

  Thanks for your help once again and I'm sorry for my English...

  Hi Marisa

  In the Device Manager please check first the network cards.
  If you see a yellow exclamation mark then that would mean that your WLan driver is not installed correctly.

  This isn't a serious problem.
  What you have to do is visit the page of the Toshiba driver we and have to choose the section of Satellite A205-S5843 WLan driver.
  Download, unzip and install it.

  All that s

• HP Pavilion g6 - 2030ee Notebook: switchable VGA not installing driver in HP Pavilion g6-2030ee

  Hello my dear

  I just installed a new (Windows 7 64-bit) in my laptop, but I have the air can not able to install the VGA driver for it

  The system has two Switchable Graphic card (intel HD 3000, ATI HD 7600 M) I downloaded the official HP drivers for the card intel, but it does not install and show this messege "" this computer does not meet the minimum requirements".

  I tried to force the installation using other versions on the Web, makes - me to restart my system and when I do start again and keep the closing force before can connect you to Windows.

  Please help me solve this problem... Thanks in advance

  Hello:

  You are not supposed to install the Intel graphics driver, that's why you get this message.

  You don't have to install the graphics driver AMD support page for your laptop that is a pilot's on order that contains the Intel and AMD drivers graphics needed to operate the switchable graphics your laptop has.

  Do not try to update the driver Intel or AMD, or switchable graphics will not work.

• I can not install driver wireless on my Tecra A8

  I can't install driver on my Tecra A8 pta83E wireless.
  I downloaded intel and Atheros driver for XP, but it does' work.

  Help, please...

  It may not be possible. Why, you try to install the WLAN drivers? Your laptop not preinstalled with comes recovery media? Recovery image contains all the necessary drivers.

  Please check sticker Wi - Fi in the lower corner and we send the part number of WLAN card. If we can identify the one that is built into your laptop. What operating system you are using?

  Hey can man you please after more than two sentences. Who knows what you're trying to do and what the problem is here.

• video controller not installed driver not

  I have a HP dc7100 CMT running Windows 7, 3 GB of ram and more than 80 GB of available disk space

  integrated video controller driver is not installed and it shows the yellow triangle with the

  Exclamation point

  Unable to locate a driver

  is it relevant for the hardware acceleration problem I get trying to play games of ms?

  I tried to install the avialable pilots to the avilable graphics driver to support but page not recognize my video card

  also have a problem installing HP support Assistant, the error message saying that I do not meet the min requirements?

  any help would me much appreciated

  Hello:

  The video card is not windows vista or windows 7 capable.

  I can give you the link for a driver that should allow you to change the resolution of your screen and select the graphics acceleration.

  What you have not and will never have is Aero, unless you purchase a Windows 7 capable PCIe compatible video card with the model.

  So, this gives a try if you want.  You must install it via the back door...

  1. download and run the laptop equivalent of the desktop video driver.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=447371&prodNameId=447348&swEnvOID=2096&swLang=8&mode=2&taskId=135&swItem=ob-47264-1

  2. you will get an error stating in substance that the operating system is not supported.

  3. close the error dialog window.

  4. go to the Device Manager and in the section graphics cards, click on your adapter VGA Standard.

  Click the driver tab.

  Click on set to update driver.

  Select the 'Browse my computer for the software' and navigate to the driver installation folder that was created when you ran the file.

  This file is located in C:\SWSetup\sp34749.

  Make sure that the include subfolders is selected, and the driver should install.

  Reboot and you should have a pretty decent screen now, just no Aero.

  If you are not satisfied with my improvisation, you can get some good cheap used W7 capable video cards on eBay that will work very well with your dc7100 if you want anything fancy.  I have a few recommendations.

  Otherwise, proceed again with a Radeon HD4350, that should work perfectly for this model.

  Paul

• HP EliteBook 8540w: "Base system device is not installed driver.

  Hello

  I recently installed Windows 7 Enterprise on my HP Elitebook 8540w, and since then the unit has been a couple of kinks.

  The material under properties pc looks like the picture. It does not install a driver for my printer/scanner, and the headphone jack has not worked since installing Windows 7 Enterprise.

  Thanks in advance.

  

  Hello:

  Please first install the chipset driver and restart:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4096175&prodNameId=4097219&swEnvOID=4060&swLang=13&mode=2&taskId=135&swItem=ob-83120-1

  The base system device is lack of card reader driver:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4096175&prodNameId=4097219&swEnvOID=4060&swLang=13&mode=2&taskId=135&swItem=ob-79317-1

  See if this driver USB 3.0 solves the problem of USB.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4096175&prodNameId=4097219&swEnvOID=4060&swLang=13&mode=2&taskId=135&swItem=ob-81459-1

  If the unknown device persists after installing the above drivers please do as David has requested and post the hardware ID's for her if we can send you the link for the drivers.

  Paul

• HP m6-1002tx with AMD Radeon 7670 m flashing the message «Not installed driver AMD» getting started

  HP Pavilion m6-1002tx with AMD Radeon 7670 m(2B) Graphics flashing the message at startup of the system "not installed for driver AMD.

  Catalyst Control also does not work

  I tried to install the driver again but to no avail

  What happens after I updated my driver via HP Support Assistant

  Help, please

  Hello

  See if the following procedure helps you.

  First, download the latest installer AMD on the following link and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56948.exe

  Then, open windows control panel, open programs and features, right-click on the 'AMD Catalyst Install Manager' entry and select the change option.

  Now, follow the procedure to uninstall the drivers and all the software from AMD.  At the end of this process, you will also get a prompt asking you if you want to remove the Catalyst Install Manager - select the option to remove it and when finished, restart the laptop.

  When windows has reloaded, open your download folder, right click on the installer AMD and select "Run as Administrator" to launch the installation.

  Once again, when this has completed, restart the laptop.

  Kind regards

  DP - K

• Do not install driver (Vostro 1000)

  So I have this old fart of a Vostro 1000 (with WinVista) I thought I would try to update some things, because it is a bit slow these days.
  I started with the driver for the graphics card (some ATI Radeon Xpress series) and went to the site Web of AMD to find a detection tool to get the correct driver, because I wasn't too sure about the exact details. Found one, he ran and found an available update. Ultimately, installation has failed, and it turns out that it was not compatible at all, and the current driver was an error 43 or so and don't work properly.

  Now, I've been sitting for 3-4 hours trying to solve this problem, but nothing helped. But at least I managed to 'upgrade' (with difficulty) to a Standard VGA graphic something (sorry, did not check the details for a while, and it's in Norwegian as well) and it's a little better, but the resolution is always bad. After a while, I also FINALLY found the standard (for Xpress 1150?) ATI driver on Dell sites.
  Tries to install it, it tells me that it can not install and I should try installing a standard VGA regardless of the first one... I already have.

  So. What do I do?

  Hello

  Just to make sure you try the correct driver, I'll send you the direct link here: ftp.dell.com/.../R169722.EXE

  Please let me know the status, when you have tried the above driver.

  Thank you.

  Best regards

  Karina

• WSD Print device is not installed driver

  I try to print on my Brother MFC 9970 and when I trouble shoot, I get a "WSD print device driver not installed. Well, I know that, because I've uninstalled it after several times trying to update due to the previous error it not updated. Now, I have no idea how do to download the driver and cannot find a driver to download to a Microsoft website that actually works. Help, please?

  Hello

  This happens for your model of printer you have given us: MFC-9970CDW NO result found at Brother for MFC 9970.

  Go to the website of brothers.

  Uninstall/reinstall your printer using the latest drivers from here your operating system.

  http://support.brother.com/g/b/downloadtop.aspx?c=us_ot&lang=en&prod=mfc9970cdw_all

  Most of the manufacturer will also have troubleshooting steps for you to take registered there, too.

  This can also help you:

  "Solve printer problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  "Solve printer problems.

  In the upper right corner, select your operating system from the menu drop-down.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See you soon.

• I am trying to load an old printer on a computer 07 but he repeats to me not installed driver. any suggestions

  I have a 07 computer and an older printer that I am trying to install. I don't have the software for the computer anylonger. I downloaded the driver from the Web site and tried to intall as a plug n play. my computer says that the driver is not installed. I can't understand how to solve this problem. Is this printer just to old for my new computer?

  I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7. Be sure to only install the driver before connecting the printer.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems:

  http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer difficulty of:

  http://support.Microsoft.com/GP/printing_problems?EntryPoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• EliteBook Folio 1040: Touchpad not working not installed driver

  Hey,.

  After you have configured my laptop (HP Elitebook Folio 1040), I can't use the touchpad scroll function.

  Of course, I tried the 'mouse' option in the Control Panel, but it seems that there is no driver installed, because I couldn't open under 'properties' of the (non-existent) synaptics tab.

  And I could not download the driver from synaptics web site (implementation of program would not install it).

  Thank you for your support!

  Hello:

  The only suggestion I can offer would be to try one of the support page for your laptop if you have not already done so.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/identify?q=EliteBook+Folio+1040&tool=s-002

• Will not install driver installer of EPSON Scan (L210) - ' error occurred when installing re start the computer, and then try again.

  Original title: problem installing scanner

  EPSON Scan (L210) setup driver moved - "is an error occurred when installing re start the computer, and then try again.

  Hey there, MAHIPALSINGH143

  Welcome to the Microsoft community forums.

  So that the community help to install your printer, we will need more information. Please answer these questions:

  1. Windows what operating system are you running (Windows 10, 8.1, 7)?
  2. The troubleshooting steps have so you far?
  3. Did you upgrade to a new operating system?
     1. If Yes, what operating system you were on before?

  When you look at the error message, it doesn't look like you need to update your drivers. You will need to go on the official website of manufacturers, with your EPSON.

  Here is the site for the EPSON drivers: http://www.epson.co.uk/gb/en/viewcon/corporatesite/support

  When I entered your model of "Epson Scan (L210)" number, it does not recognize the product. Would you be able to check and make sure that you have provided the correct model number? Your model is a new printer?

  Kind regards

• I try to install XP but computer says no hard drive not installed drive. Is that my hard drive bad?

  I have a gateway lap top that gave me and it has windows vista. I train download XP Pro, but when I press on enter, after starting from the cd, he says he is not any hard drive & to check if it is enabled. If it can mean my hard drive is not good? I don't know where to look in the bios and see if it recognizes. He shows me the ram, but I don't see anything on a hard drive in the bios.

  See the post of Bruce Chamber.

  If you have a SATA drive, you

  need to use a floppy disk to load the SATA driver (and the laptop probably doesn't have a floppy disk)

  or

  change the setting in the BIOS so that the drive uses "Legacy" or IDE compatibility"mode or disable mode"SATA Native. "

  or

  create an installation CD slipstreamed that integrates the SATA drivers.  See, for example, http://news.softpedia.com/news/Install-Windows-XP-On-SATA-Without-a-Floppy-F6-47807.shtml if you chose this option, ImgBurn is a good free utility to create ('burn') the CD once you used nLite to create the ISO file.

• Optiarc dvd rw ad-5540 unit has ata device not installed driver

  My dvd player wasn't working so I uninstalled and tried reinstalling the software but I got this message instead.

  "Windows found driver software for your device, but has encountered an error trying to install it."

  CD-ROM drive

  The IO operation has been abandoned due to a thread exit or an application request.

  If you know the manufacturer of your device, you can visit their website and check the support section for driver software. »

  Please help it used to work, but recently stopped.

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question in Vista Hardware and drivers Forum above.

  See you soon.

  Mick Murphy - Microsoft partner