Optiarc dvd rw ad-5540 unit has ata device not installed driver

Similar Questions

• Optiarc dvd rw ad - 7561 has ata device

  My optiarc dvd drive does not work with dvd + R DL. Is this normal?

  ostlokla1

  Hello

  It should work with both + and - R discs.

  It's the version of HP of its description:

  Original HP AD - 7561a Support LightScribe technology 8 X DVD +/-R/RW/RAM DL writer

  =======================================================

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burn
  and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Burning at low speed, or by using the master could help. Maybe a CD/DVD cleaner
  Help.

  CD have a tolerance + - and you can write on the edge outside their tolerance. They
  may be released but it is usually more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  --------------------------------------

  To solve the problems:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Gateway M series Optiarc DVD RW AD-7640 has ATA Device read any CD/DVD

  I have a gateway M series, and my dvd rw optiarc dvd rw ad-7640a ata would not read any cd or dvd, pls help!

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Optiarc DVD RW AD - 7910 has ATA Device

  Hello
  I have an Optiarc DVD RW AD - 7910A ATA Device. last week my laptop stopped recognizing it & after running the fix auto program it did nothing... can someone please help me?

  I use a laptop Lenovo T61

  Windows 7 Ultimate (X 32).

  Thank you

  ·                        http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• TSSTcorp DVD +-error code RW TS - H653G ATA Device 39. I can't reinstall the driver. What can I do? programs and disks will not play.

  DVD drive no longer appears in the list with the C: drive
  drives can run in the drive.

  Hello

  Code 39 means that the driver is corrupted or missing.

  -------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• This device cannot start. (Code 10). Matshita DVD-RAM UJ-850 s ATA device not found.

  The operating system does not detect the Matshita DVD-RAM UJ-850 s ATA device on my Toshiba Satellite. I tried Microsoft Auto difficulty and it didn't fix it. The CD player worked last week when I installed ITunes software. Now, the driver cannot be detected. Known corrections or suggestions?

  You must uninstall, then reboot and let the program installation is the device when it restarts. If the correct drivers are found, it will install. In case of failure, it's probably because Search Setup default is files of the user and not the C:\windows\inf or directories c:\windows\system32\drivers\, which you can specify by choosing to install from a list or specific location, and then by typing or by going to the it. If this fails, check the bios settings.  But most likely your original driver was silently replaced, by a program system file or a third-party application. If need be, you can try a system restore to return the parameters of your system to a point in time where everything worked. I would try one more point to restore and not a newer version, preferably a restore point launched machine, not one caused by installing or removing a program or a driver. "THE BEST THING TO DO IN THIS WORLD IS A WRONG ANSWER! "I"DON'T"WINDOWS...". »

• my computer no longer has the CD-ROM or DVD in the system and the wizard it not install them

  In addition, it will not install my digital camera.

  Hello

  · What happens when you insert the CD/DVD disk?

  · You receive an error message or error code when you try to install the digital camera?

  · What is the service pack installed on your computer?

  · Do you remember recent changes made to your computer before the show?

  You can run the troubleshooter from the link below and check the results. Link: It can not your CD or DVD read or write media player:http://support.microsoft.com/mats/cd_dvd_drive_problems

  You can also check: how to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD: http://support.microsoft.com/kb/321641

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• BT has disappeared and not install it on the Satellite A100-847

  Hello

  before 3-4 days, I changed my dvd - rom with a new because it worked not and after a few hours, I saw that the bluetooth icon is red (the bluetooth does not), but it has been turned on... (bluetooth is INTEGRATED, I'm using the toshiba bluetooth stack and I'm with Windows Vista 32-bit)

  I tried to turn on and off and he disappeared completely even from the Control Panel, and so on.
  I tried to reinstall the drivers, but it gets stuck in the window installation of drivers and what he shows me an icon of a key usb with this http://s10.photobucket.com/albums/a103/H34oBeK/?action=view¤t=bluetooth.jpg message

  It says that the usb device is faulty... and it's every time when I try to install the drivers or switch button wireless and bluetooth-> power

  I even reinstalled Windows and the same problem...

  You have any ideas?

  Please help :)

  I found the following in the post:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=133803𠪫
  --------------------------------------------------------------------------------------------------------------------------------------------
  The "Bluetooth ACPI" device is listed in the "System devices" section of the Device Manager?

  If this isn't the case, then no Bluetooth module is attached to the motherboard. It's may be unplugged if it worked before.

  If so, check your antenna switch of your laptop if it is really running material.
  Normally, a LED lights to indicate that it.
  Press + and select again the Bluetooth antenna.
  Right mouse click on the bluetooth system tray icon and select 'enable the Bluetooth radio '.
  If nothing works, then I guess that:

  * already installed another battery Bluetooth using the bluetooth module or
  * your bluetooth module has loosen or is damaged.
  --------------------------------------------------------------------------------------------------------------------------------------------

• I have a code 39 error on my TSST corp CD / DVD, TS-H652D (ATA) can not reload driver. best options please

  The player runs, but can't do anything. Thought on the use of the third party site was updated, but didn't know if it was legitimate. She noted 19 updates for my computer, but no mention of CD driver.

  craigdavis,

  Try...

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  or

  How trouble error Code 39 with CD-ROM or DVD drive in Windows XP/Vista

  Rick

• My HP Officejet Pro 8500 has more will not install on my laptop with an ethernet cable or wireless. I need help!

  I have a laptop Sony Vaio with Windows 7 and I can't install my printer wireless with my laptop. I tried to use the ethernet cable and troubleshooting, but no option doesn't solve the problem.

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Solve printer problems (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Open the printer (Windows 7) Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HL-DT-ST DVDRAM GSA - T40N ATA Device works like a CD player. It is supposed to be a DVD player?

  Hello

  First of all, I would like to thank you in advance for your help.

  I had the problem of my HL - DT - ST DVDRAM GSA - T40N ATA Device not reading anything into the drive and removed the filters. It is still not working properly, and it's the rare occasions when he did (after hitting enough lol) and I needed it to work again. I disabled the device and rebooted before her reactivation. Although it works now it has unfortunately fizzled. It is now only installed as a CD player and it used to be a DVD player. Before it stopped working TI played DVD 100% fine as well so it should be good.

  Here is some info on my laptop:
  Model: Acer Aspire 5920
  OS: Vista Edition Home Premium
  RAM: 3 GB

  If you are in need of any more information do not hesitate to ask!
  Thank you
  Jack

  Hello

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Several good info here:
  http://Club.cdfreaks.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  I hope this helps and happy holidays!
  Rob - bicycle - Mark Twain said it is good.

• Reinstall for TSST corp CDDVDW TS - L633B ATA device

  I have the yellow exclamation mark beside TSST corp CDDVDW TS-L633B ATA cd/dvd drive device, I ran a fix, but it tells me that I need to reinstall. How can I do this? The cd player has always been very sensitive. Sometimes, longer works once not.

  I have the yellow exclamation mark beside TSST corp CDDVDW TS-L633B ATA cd/dvd drive device, I ran a fix, but it tells me that I need to reinstall. How can I do this? The cd player has always been very sensitive. Sometimes, longer works once not.

  Here is the solution to update your device with the latest driver of Toshiba/Samsung.

  Introductory material.

  
  

  1 here is the update for TSSTcorp CDDVDW TS-L633B ATA DEVICE.

  2. There is a update for the Samsung TS-L633B, but there only version SC01, which WILL NOT be updated the version of the TS-L633B HP because HP version is 0301 with an OEM Code of HM.

  3. However, Samsung has renamed TS-L633B with a new device driver ATA which is called SN-S083B and has a pilot SC02 update.

  4. the way that you update TS-L633B Code 0301 Version with HM Code OEM with the new Samsung SN - S083B Version SC02 Code is to patch the file and flash TS-L633B HP with the patched file.

  Instructions.

  
  

  IMPORTANT - THIS ONLY REFERS to those who have the HP TSSTcorp CDDVDW TS - L633B ATA Device - check device manager to make sure that you have this model number device driver before you start - YOU DO THIS at YOUR OWN RISK. Proceed only if your product is not guaranteed and do not wish to pay for another DVD player.

  1. click on the following link and download the firmware SB02. Global Distribution of SN-S083B: http://www.firmwarehq.com/download_1380-file_SN-S083B_SB02.exe.html

  2. If you don't have a utility program unzipped, click on the following link and download and install 7zip that corresponds to your computer from the following link: http://www.7-zip.org/download.html

  The BIN SN-S083B unzip using 7zip by right clicking on it and choosing 7ZIP > extract here.

  3 download the Flash Samsung Standalone utility:

  http://www.samsungodd.com/KorLib/file/tsdnwin.exe

  4. download and unzip http://ala42.cdfreaks.com/MCSE/MediaCodeSpeedEdit.zip to ala42 MCSE

  Download source: http://ala42.cdfreaks.com/MCSE/

  5 create a folder and name it FLASH and place the following 3 items in the folder.

  SN - S083B_SB02.bin that you have checked out

  Flashing Samsung Standalone utility

  MCSE of Ala42 you have downloaded and extracted the zip file

  6. After you have placed all three objects in step 5 in the folder named FLASH, place the FLASH folder and all of its contents in the C drive.

  7. After placing the FLASH folder in C drive, open the folder and CLICK on RUN AS ADMINISTRATOR and ALA42 MediaCodeSpeedEdit.exe RIGHT.

  8. when ALA42 MediaCodeSpeedEdit.exe opens, click the LOAD button and place you in the FLASH folder in C drive and load the file SN - S083B_SB02.bin - when the file it load it will show all of its regions.

  9. once the file SN - S083B_SB02.bin is fully loaded, place a check MARK in the area of CPR1 in the lower right of ALA42 MCSE.

  10. After putting a check in the box by ALA42 MCSE CPR1, click SAVE in the upper right and save the file in the file FLASH as SN - S083B_SB02_speedpatched.bin.

  11. now go to START > all PROGRAMS > ACCESSORIES > COMMAND PROMPT and right click on command prompt and choose RUN AS ADMINISTRATOR to open the command prompt in the Administrator role.

  12. once the command prompt opens, type the following command: CD C:\FLASH and press the ENTER KEY.

  13 after hitting the button enter, the command prompt should read FLASH.

  14. to the FLASH command prompt, type the following: nocheck tsdnwin and press the Enter button to open the flashing Samsung Stand Alone.

  15. when the flashing Samsung Stand Alone opens, click on the on button SEARCH and navigate to the file 'SN - S083B_SB02_speedpatched.bin"to load it into Samsung's Flash utility.

  16. the file "SN - S083B_SB02_speedpatched.bin ' will load and click on DOWNLOAD to start flashing your TS-L633B ATA Device.

  Wait until the flash is finished and when it finishes, it will ask you to restart the computer and you must restart.

  When you rebott and are back at your desk, Windows will recognize the drivers for your TS-L633B ATA Device and install the new drivers SN-S083B_SB02.

  When it finishes installing your drivers, restart the computer once more, and then you're done.

  NOW ENJOY your CD/DVD-RW drive updated.

• EXPULSAR ST9250827AS ATA Device

  In mid tower appears k TR deseo y Expulsar ST9250827AS ATA Device not be como hacer para quitar ese message u option

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you

• Optiarc dvd rw ad 7280 s ata device has a driver problem

  "" How can I solve this problem of pilot-"optiarc dvd rw ad 7280 s ata device has a driver problem" and error 19

  I am using windows 7 Home Edition

  The does'nt of the computer recognizes the optical device

  How can I SOLVE this

  E-mail address is removed from the privacy *.

  Thank you

  Hello.

  -Run these attach the.

  http://support.Microsoft.com/kb/316529/

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  http://support.Microsoft.com/kb/982116

• Error, device ata Optiarc dvd rw ad - 7563 has

  I just noticed this problem. When I went to download the software for a new printer he wouldn't have anything as much as any screen or formatting. The error is OPTIARC DVD RW AD - 7563 ATA DEVICE A. I tried to fix it in the DEVICE MANAGER but repeat me that it is not properly installed. However when I look in Device Manager it says I have the latest software for it. How can I fix it?

  Hello

  Try this - Panel - Device Manager - CD/DVD - RIGHT click ON the drive - UNINSTALL - REBOOT

  This will refresh the default driver stack.

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after startup

  Hardware devices not detected or not working - A Mr Fixit

  http://support.Microsoft.com/GP/hardware_device_problems

  Normally the above will solve this problem otherwise working your way down through them, even if you did

  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  I hope that these AIDS

  Mark <> Microsoft Partner