y at - he of the driver files for dell dj 20 GB for windows 7

Similar Questions

• I have a problem with installing the driver bluetooth for Windows 8.

  Original title: cannot install the bluetooth driver

  I have Windows 8 Pro 64-bit (upgrade of Windows 7 Ultimate 64-bit).  I have problems with the bluetooth (Intel Centrino Advanced-N 6230) driver that will not be installed.  The

  error I get when using the driver (downloaded directly from Intel) Intel says "did not write the SupportDLL value in the \SYSTEM\CurrentControlSet\services\BTHPORT\Parameters key.

  \Radio support.  Check that you have sufficient access to that key or contact your support team. »

  Windows Update also displays several times this driver, but it fails to install as well.  If I remember correctly, the error is "access denied."  I contacted Microsoft earlier

  technology has taken control away from my computer and found the same problem.  It disabled all startup and restarted, but we do not have to reconnect after reboot, that's why I'm

  contact you again.  I'm guessing that something has gone wrong in the remake because precisely, I noticed it has disabled my facial recognition software, yet when he

  restarted, it took even my face.

  I am logged as administrator and I have also tried to right click on the .exe file and run as administrator, but it does not help.  I tried

  uninstall/reboot/reinstall with no luck.  I also tried several programs microsoft fix - it, but even once, no, I also tried to contact Intel by CAT and they

  were no help either.

  I tried also to navigate to this key in the registry editor, but I get an error message that says "error opening key.  Parameters cannot be opened.  An error is

  This key prevents open.  Details: access denied. »

  Finally, I'm frustrated and ran a repair of Windows 8 (could not restore because when I upgraded to Windows 8 Windows 7, somehow restorations have been disabled and I did not notice for about a month).  Then, I used the bluetooth driver directly from intel and everything works again.  I will say that when I ran the repair, he removed Windows Media Center (since it is therefore more part of the OS, but an add-on), but it's a very small price to pay for everything works correctly.

  Thanks for the help everyone!

• Install the driver AHCI for Windows XP

  Recently, I took the preload Windows 7 on my p6210f and installed Windows XP family 32-bit on another hard drive.  I had to change the AHCI IDE controller BIOS to install it, and it's always this way, because the start-up in Windows XP with the AHCI BIOS will give me the stop error message.

  I see on another thread that the AHCI controller can be downloaded here:

  FTP://ftp.HP.com/pub/SoftPaq/sp39501-40000/sp39786.exe

  The thread that is here:

  http://h30434.www3.HP.com/T5/operating-systems-and-software/how-to-downgrade-to-XP/TD-p/1445

  I am wanting to know if I can just run the sp39786.exe thing, restarts at the start screen, change to AHCI and then start normally.

  Thank you.

  The engine number of images is purely the choice of the user. I do an image after a clean installed with all updates & my installed programs. I do sometimes still 5-6 months later if I did several changes in apps, etc, but not a necessity. Most important for me is to have the first image of my machine freshly set up. I can always return to this configuration in less than an hour.

  A person who installs / uninstalls many software may prefer to make several images as. You can save as many images you have the disk space or DVD for. I use USB external hard drive to back up my images which is faster to burn to DVD.

• where can I find the driver files to dvd for my x16t-1200 cto?

  I don't find the driver files for my dvd player.  can someone point me in the right direction?

  Computer laptop HP HDX - model X16T-1200 CTO

  Hello

  The driver for the CD/DVD drive is provided by the Windows operating system.  If you have problems with the drive, try the following.

  Run the fixit automated Microsoft at the link below.

  Windows 7

  Vista

  Check if the drive works now.

  If it isn't, click on the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.

  Then, click on the Start Menu, open Control Panel and click Device Manager.  Click to open the CD/DVD-ROM drives.  Right-click on the drive and choose uninstall.  Do not delete if requested drivers.  When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar).  Let windows reinstall the disc and see if it works now.

  Kind regards

  DP - K

• I am trying to reinstall photoshop elements 10, however, when I upload 2 recommend files for window and try to double-click the file of the application to install. He is still blocked and installation stop repsonding to 92%.

  I am trying to reinstall photoshop elements 10, however when I download the 2 files for windows is recommended and double-click file from application to install. He is still blocked and installation stop repsonding to 92%.

  looking for an incomplete 7z file.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate? I use Windows Vista backup program (Service Pack 2),

  How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate?  I use Windows Vista backup program (Service Pack 2), and I need to do backups plus two from other computers on the same external hard drive.  To do this, I think I would need to identify each backup file separate I know which file to specify if I need to do a restore.

  How can I accomplish this? The program does not seem to give me the ability to specify a file to which to write the backup during a given session files.  In addition, I do not understand why I can not see the file name in Windows Explorer - my files options are defined to be able to view hidden and system.  Would be grateful for any help you can provide, tonight if possible.   Best regards, Oliver for Norm

  Hello

  See this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-or-change-automatic-backup-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

• The drive letter for the files on my external drive does not match the designated letter MyWindowsApp, after briefly changing pots

  On my Windows 7 laptop, I briefly moved an external hard drive to a USB port to another and then back.

  The reader is referred to as F, as it was originally, but since the temporary move the path for some files now show that E.

  I went to disk management and confirmed that the drive is detected as F.

  This disrupts programs such as Adobe Premiere Elements. It always hurts new information loaded in the disc I load that is in F, but the said path E. The file is clearly on record.

  Hello

  I see that, after changing the port, the drive letter for the external drive has changed. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  You can follow these steps to assign a letter to the external drive and check if that helps.

  1 - click on 'Start' button.

  2-right-click on "Computer" in the list that appears.

  Option 3 - Select the 'manage '. If a warning appears asking for your permission to continue, click on the OK"" button.

  4 - Choose "Disk management" in the left column of the computer management window. Find the USB in the list that appears in the gray bottom of the center column.

  5-click right on the part of the screen that represents the USB key, and then click the option "letter of change of road and railways.

  6 button - click on the 'change' in the window that opens.

  7. ensure that the radio button to "assign the following drive letter:" is selected. To the right of the present is a drop-down list with the drive letters currently not assigned to all of the drives on your local system. If you are not on a network, choose the drive letter you want for your USB key and then click on the OK"" button.

  8 - click on the 'yes' button in the confirmation box that appears.

  Refer.

  Change, add, or remove a drive letter: http://windows.microsoft.com/en-US/windows7/Change-add-or-remove-a-drive-letter

  I hope this helps.

• Do not know how to install the driver LAN for Satellite A100-787

  The driver LAN for Satellite A100-787 is delivered with no configuration file and windows hardware installation does not recognize.

  I don't know how to install it... Any help?

  Hello

  I guess you are trying to install the driver LAN WXP because Vista LAN driver is not available. Am I wrong?

  In any case:
  -Create a new folder on your desktop
  -extract all downloaded files here
  -Open Device Manager and right-click on device unknown you want to install
  -choose Properties
  -find the Install driver button
  -Click on it and go to the new folder created
  -Follow the on-screen menu

  I hope that you can install to ti the pilot FTAs.

  Good bye

• DeskJet 2540: Cannot download the driver file

  I need to reinstall my printer I changed the settings on my router and WiFi.  I tried three times to download the driver file - 2540_188.exe.   It seems to take some time every time that I tried and when I try to open it I first get a wanring of security of Windows 10 and if I by that and try to open the file I get a message "file corrupted".

  Please can someone help?

  Brian

  Welcome to the community @brianardmore HP

  I came across your post about problems you encounter when you install the printer on your system Windows 10 and wanted to respond to my suggestions.

  I recommend power cycling network devices and a clean boot on your computer and then try to install again.

  1. turn off the printer and the computer and unplug the router for 1 minute (do not press the buttons on the router).

  2. plug the router back in and wait another minute, turn on the printer and the computer.

  3. from the computer, start clean: clean boot instructions

  4. download and install the printer here: printer install file

  5 return to clean boot instructions and allow the start of programs.

  Note: the security program you have on your computer may be detecting the printer as a threat. Try looking through the settings in this program to add the printer to the list 'allow' so that he knows that it is safe.

  You can also try installing the printer using a different method, such as if you are installing wireless, try USB and then convert the USB wireless when you have completed the installation.

  If you have any questions let me know the details. Good luck!

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

• Is it possible to get the files for windows vista, so I can reinstall my system?

  Hello

  Im a user of linux on one machine HP Pavilion dv5-1095eo leisure. IM tired to restart my machine to run a windows OS, so is possible for me to get the files for windows vista. I got the windows key attached under the computer and I don't have any windows CD when I brought the machine.

  Hello:

  You can do your own installation disc Vista too if you wish.

  If you can read your 25-character product key MS, you can make your own Windows Vista installation disc. You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

  I selected no, make the ISO file.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them (just before going forward with the actual facility) and they seem to work perfectly.

  Apparently, when you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-VI...

  After you have successfully installed vista, you can download the drivers you need your PC support and driver page.

  Paul

• To install the device driver required to access your hard drive, insert the installation media containing the driver files, then click OK."

  I'm trying to move from xp to windows 7. I spent all the requirement but she says to install the device driver required to access your hard drive, insert the installation media containing the driver files and then click OK. "what should I do? Where can I find the driver?

  Guess he would seek software/drivers for the chipset MB

  & sata/IDE controller software. Get the MB hardware specifications, go to the mfg

  Web site & download the software and drivers. If intel, download the chipset installation

  utility & install it 1. The other would be the SATA or / and drivers for the MB IDE

  controllers, 'Matrix Storage console' would be the one, also chk for desktop

  Internet downloads, amd, and other brand materials would be substantially the same.

• Why the driver file cannot be "x 86"?

  There is a strange problem for a driver: the driver file cannot be "x 86" under windows XP.

  I have a driver, the driver started the "i386" folder files and I can install the driver successfully.
  can I change the name of folder name to "i386" to "x 86". When I try to install the drver, a message box pop up to tell me "xxxx necessary file", installation failure
  and I can confirm also that any driver so its files to 'x 86' folder, it will be impossible to install. If I changed his name to another name of folder except "x 86", the driver will be installed successfully.
  Why? The folder name is "x 86" is a reserved name for the driver under windows xp? any document referred to this problem?

  Hello chyao,.

  Thank you for visiting the Microsoft answers community.

  If I understand what you're asking, you try to rename the folder i386 for x 86?

  i386 is a folder used by windows (one copy installation files) and cannot be changed to raise the questions you had. The file has not to be present for Windows runs correctly, but before maintenance and repair, it is used. In your case Windows was looking for a driver in the i386 folder.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to update the driver wireless for Pavilion dm4

  Hello

  My internet provider says my wireless driver needs to be updated to use the new Wi - Fi modem. What should I do? Could you please give me detailed step by step instructions?

  Laptop: HP Pavilion dm4

  Windows 7 Home premium

  Series # [personal information]

  Model # dm4 - 2053ca

  Product # LY126UA #ABC

  Under "Network adapters" in "Device Manager", he listed...

  Atheros AR8151 PCI - E Gigabit Ehernet controller (NDIS 6.20)

  Device Bluetooth (personal area network)

  (Heading RFCOMM Protocol TDI) Bluetooth device

  Intel Centrino Wireless-N 1030

  MS Virtual WiFi Miniport adapt

  MS Virtual WiFi Miniport adapt #2

  Thank you!

  Hello:

  Here is the link to the latest driver wireless for the Intel Centrino 1030.

  You want the second file in the list, given that product for your laptop specifications indicate it has Windows 7 64 bit.

  http://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22116&lang=eng&OSVersion=Windows%207%20(64-bit) * & DownloadType = software % 20Applications

  There of not much to it.

  Click Download to the right of the driver file, accept the agreement, select the run option and follow the instructions on the screen, if necessary.

  Installation is automatic and should take less than two minutes.

• Cannot remove printer drivers Canon MX350. The error that the driver files are currently in use.

  Original title: Canon MX350 printer

  I can't remove the MP (Canon MX350) drivers in my computer.  In the Remove Programs option request to remove the drivers but he tells me that the driver files are currently in use and is abandoned.  I deleted all the other software printer with no problems.  The printer has been set up with Wi - Fi.

  Thank you for your comments.

  Finally, I stumbled upon you are the indications you mention in step 1 above and finally managed to remove the MP drivers with the Remove programs in windows 8.  When this was removed successfully, I followed on by deleting all associated programs.  It removed all the Archives of the printer on my PC.

  I then reinstalled from the original disc and everything works fine now.

  Thank you once again.

  John

• I've uninstalled and reinstalled the drive several times with the same result, my problem is when I download the drive icons for my browsers and above all my desktop icons change adobe logo, so when I click on them Adobe tries to open them.

  I've uninstalled and reinstalled the drive several times with the same result, my problem is when I download the drive icons for my browsers and changing most of my the desktop icons for the adobe logo, so when I click on them Adobe tries to open them, of course, he does not format because it's not an adobe application , so I tried to restore the computer to an earlier date and it wont let me as long as Adobe reader is installed, so I need to uninstall and now I have nothing to open files and downloads of Adobe, someone had this problem and if so, did you get it resolved? Thank you Tommy...

  This may help: Application, file icons change in Acrobat/Reader icon