y at - it a bug with track lock

Similar Questions

• Bug with mechanical locking Action?

  I think that there is a bug with the Action of mechanical latch Boolean: lock releasing in LabVIEW 2010 when the Boolean value is in a cluster with a cluster as one of the things in the cluster.

  For example if a cluster contains the following Boolean not begin properly when the cluster is read.

  1 cluster with a digital command.

  2 boolean with the mechanical Action on the latch.

  I have attached a vi that shows this.

  Instructions

  Press the ok button in the vi.

  Then, run the vi.

  Notice how the light comes on, but the ok button remains pressed.

  This only seems to happen in LabVIEW 2009, that's why I think it's a bug. Also if you rearrange them controls for the Boolean control is before the cluster, it will work as expected.

  Anyone confirm what is happening?

  
  

• bug in the lock and send it to 11.1.1.3 Excel?

  Y at - it a bug in the lock and send it to 11.1.1.3 Excel?
  I have two lines in excel as shown:
  After I lock and send, both lines have 177.00. This occurs even if the two lines were separated by other lines of data.
  Thorough review of each Excel cell, I see two single quotes before 360 and 6020 2nd line. the first line 360 has single quote, but there are spaces between the single quote and 360. Here is roughly what I see (this site deleted my spaces, so you won't see space in 360 of the first line and its apostrophe):
  
  Jan
  
  ' 360 75 6022 2,424.00
  "360 19" 6022 177.00
  
  On further testing, I discovered that it was the LACK of apostrophe in CC "19" that caused the problem. It's weird that Essbase does not give an error message complaining that 'not all dimensions' as currently.

  If Essbase is a line in a lock and send that contains invalid members, it will load the last combination of valid membership (with no error, as you have noticed). For this reason, I always do a recovery on the dimension members that I want to load first, because she's going to tell me that the members are not valid. On a copy of the sheet of recovery (set to incorrect member), I'll type then the values I want and then lock and send. In this way, I'm guaranteed to send exactly what I want to send where I want to send it.

  Sabrina

• Bug with the donation page today

  You have a bug with your fundraising page. I have selected $10 and transferred to Paypal to $3. I tried again and made sure to click twice on a $10. I got the same results. I thought you should know.

  Hi el_nik,
  I filed a bug to prosecute for the page to donate. However can you please confirm that this always happens after that you remove the cookies from the page?

  • How to clear the cache of Firefox

• Bug with high speaker on the Satellite C650-144 with Window 7

  I have a bug with my high speaker, so I download driver leatest and nothing has changed.
  But when I use the jack slot it works and when I put it and when I go to the speaker icon in the windows taskbar there is 'activity' because the level moves, but there is no probe on my high speakers.

  For windows everythings works fine, so I don't know what I have to do...
  I went on the Internet on the forum, but there is no solution for my problem!

  Please help me!

  My computer references are: Satellite C650-144 and PSC08E-01100DFR
  Please excuse me for my English...

  Thank you very much!
  Friendly
  aldebordeaux

  Hello

  Simply said; You can listen to the sound using headphones, but can not hear the sound on the speakers. Right?

  Have you noticed this early? Have you installed a few 3rd party applications may affect the functionality of speaker? Maybe some Windows updates can affect this?

  Please check the settings in the control panel-> sound-> the Read tab

  As a last resort, I recommend for recovering the device I want to say, it looks a bit because of speaker, but I strongly recommend to test the laptop with the factory settings.

• I have a hp mini 110 with a locked bios

  I have a hp mini 110 with a locked bios and 8 hash code for the figure of 88070525. can I get help please? Thank you

  A try.

  37958501

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

  Let me know.

• I encrypted my external hard drive with bit locker, now how to decrypt after reinstalling windows 7

  Original title: Bit Locker question!

  I encrypted my external hard drive with bit locker, I had just installed windows 7 ultimate, I found in a hurry I have does not support for 7 and decided to reformat and to return to my pro victory, I did and when I plugged my external in my cp asked if I wanted to format my external , that's when I realized in my haste I forgot to decipher my outside, so my Q should I do to decipher my external or I'm out of luck?

  Hello

  See the bottom of the articles that might help you.

  Learn more about BitLocker Drive encryption
  http://Windows.Microsoft.com/en-us/Windows7/learn-more-about-BitLocker-Drive-encryption
  Guide step by step for Windows 7 BitLocker Drive encryption
  http://TechNet.Microsoft.com/en-us/library/dd835565 (WS.10) .aspx

• [Q] NEO V: ROOTING AND INSTALLATION OF CWM WITH BOOTLOADER LOCKED TO 4.0.4

  Please let me know how the ROOT AND CWM FACILITY WITH IN LOCKED BOOTLOADER 4.0.4

  You need flash version 4.0.3 kernel, then root.

  So follow step e given under How to root 4.0.4

• How to install rom 4.1 enigma n 4.2 in p xperia with bootloader locked?

  How to install rom 4.1 enigma n 4.2 in p xperia with bootloader locked? If anyone knows please tell the steps, don't post juice link xda developers, cz I tried before posting here

  You must open your bootloader

• My Wd hard drive has been locked with Bit Locker and I don't have a password or recovery key. Please help me?

  MR PRESIDENT, I LOCKED UP MY HDD WD 320 GB WITH BIT LOCKER OF WINDOW 7. DUE TO SOME PROBLEMS, I CHANGED MY HARD DRIVE & FORMATTED OS WHERE I KEPT THE RECOVERY KEY. I COULDN'T REMEMBER MY PASSWORD AND RECOVERY KEY. I HAVE VALUABLE DATA in HDD. KINDLY HELP ME TO RECOVER DATA

  THANKING YOU.

  Sorry, the news is not good. Some time ago, you have chosen BitLocker because you want to protect your data against unauthorized access. If someone had told you that anyone can crack the encryption by asking a little help in this forum, would you have chosen BitLocker?

  BitLocker is as good as its reputation. Unless you followed best practices and created your own backdoor, your data is lost.

• As I unlock my external hard drive with Bit Locker Drive Encryption, I get an error.

  Hi, I'm unlock my external hard drive with Bit Locker Drive Encryption I get an error like "BitLocker Drive Encryption doesn't have to recover from a suddenly completed conversion. This can result from the newspaper of conversion being corrupt or the media is write-protected. "Please help me what should I do to unlock my drive."

  Hello Rodrigues,

  I suggest you to use the BitLocker Repair tool to get data from the encrypted hard drive.

  Follow the steps from the link below:

  How to use the BitLocker Repair tool to help recover data from a volume encrypted in Windows Vista or in Windows Server 2008

  You can download the BitLocker Repair on the link costs: BitLocker Repair tool

  Note: This article is also applicable to Windows 7.

• Publish with essbase lock and send

  I am facing a strange problem with my lock essbase and send. For example if there are 2 lines in the worksheet we need loack and send data, if a member of the second row who is mentioned is incorrectly or not present in the outline, essbase replaces the invalid member with the Member of the same column in the previous row, and sends the data instead of reject the line It's the origin of the data issues. I want the second row is rejected by the lock and send, I use essbase excel addin. the version of the addin is 11.1.2.0 and execution of upload essbase server version 11.1.2.4.004. Could someone please help me solve this problem.

  Hello

  what you describe is a common feature. Unknown member (or comments) are ignored in SmartView, but when the application can be designed by taking the last known member of the dimension, the query (and lock operation and sending) are carried out.

  For example, there are 2 dimensions in rows, the period and the scenario.

  He comes to work and click OK:

  Real 11 Jan

  Budget of Jan 10

  Real 11 Jan

  Budget 10

  This will work, Budgets is misspelled, and when we let out, you see a bad request:

  Real 11 Jan

  Budgets of Jan 10

  Real 11 Jan

  Jan                     10

  This will work, Jans is spelled wrong, and when we let out, correct query will appear:

  Real 11 Jan

  Jans Budget 10

  Real 11 Jan

  Budget 10

  This will happen at your side. Smart View has (for me) not a real feasible option to come around that. It goes same for formulas - the result of these will be loaded with lock and send.

  Kind regards

  Philip Hulsebosch

• Bug with the embedded font.

  Hello
  

  
  

  I have a strange bug with the font Cooper (Std Black Italic)...

  Here's what looks like a multiline text in the Flash Editor:

  

  Now, here's how it looks when I embed the fonts in a SWF file, and then load and use from the AS3 code:

  

  [this] is happening?

  Here are the parameters of line values I get from getLineMetrics (0):

  Ascent: 51.2

  descent: 51.2

  height: 102.4

  head: 0

  
  

  I tried to reexporting the police, the same problem. I also have the same problem when I export the scene editor and read it with Ctrl + Enter.

  It seems THAT the good in the editor... I don't know what to do. I reinstalled even the police. :/
  
  Also, I have this problem with all fonts... or at least every 5 different fonts, I tried.

  
  

  [moderate]
  

  I finally fixed it by recreating the Mac fla file.

  Looks like it is a problem with Windows.

• Weird bug with DC model spawning

  Hi all!

  Here's a weird bug with DC model spawning that I am struggling to solve.

  I do my development in Adobe Pro XI.

  I recently had some complaints from users saying model spawning would not work in Adobe DC.

  I installed DC Adobe reader and found this weird bug

  I created a simple PDF to illustrate.

  1. PDF has hidden the model named "RawDataPage".
  2. PDF has 6 pages at the beginning
  3. First page contains 4 buttons.
  4. 1 button adds 1 model after page 6, 2 button adds 2 models after page 6 and so on
  5. Close the PDF without saving the changes after clicking a button, just observe spawning
  6. You can find PDF files and screenshots to dropbox link https://www.dropbox.com/sh/qap5j5tzyomrlxw/AABGFv6Z0jGKE62SO6pgy2YSa?dl=0
  7. I'll update a shared folder to the arrival of the information
  8. find out all the code js inline below

  A fix is available for this bug. With the help of Acrobat | Release notes | DC Acrobat, Acrobat Reader DC | Update and download the ' patch '.

• PowerCLI 6.0R2 bug with Import-Module-prefix?

  Yesterday I installed a couple of nine Win2012R2 servers and of course installed PowerCLI 6.0R2.

  In order to avoid multiple commands with the same name, we use the--Prefix setting for the modules. It worked great in R1 but I am facing problems with R2.

  Load the modules with code below:

  $VMwareModules = 'VMware.VimAutomation.Core', 'VMware.VimAutomation.Vds'

  foreach ($Module in $VMwareModules) { }

  if (! (Get-Module | ? {$_. (({Name -eq $Module})) {}

  Try {

  Import-Module -Nom $Module -Prefix "VMW"

  }

  Catch {

  $ErrorMessage = $_ . Exception. Message

  breaking

  }

  }

  }

  
  

  When running Get-Module now the modules but show the Basic module shows all ExportedCommands (which he did in R1).

  Basic modules shows too, now that 'script' instead of 'manifesto', as in R1.

  Not sure if this has anything to do with this.

  
  

  If we compare the number of orders 'Raphael' in R1 and R2, missing 300 orders for the Basic module in R2.

  
  

  Is this a bug? Is there a solution?
  

  
  

  R2:

  PS C:\ > get-module

  Version of Moduleinfo name ExportedCommands

  ---------- -------    ----                                ----------------

  Script Initialize-VMware_VimAutomation_Vds 0.0

  Manifest 3.1.0.0 Microsoft.PowerShell.Management {Add-Computer, Add-Content, Checkpoint-Computer, Clear-Con...}

  Manifest 3.1.0.0 Microsoft.PowerShell.Utility {Add-Member, add-Type, Clear-Variable, Compare-Object...}

  VMware.VimAutomation.Core script 6.0.0.0

  Clear VMware.VimAutomation.Sdk 6.0.0.0

  6.0.0.0 binary VMware.VimAutomation.Vds {add-VDSwitchPhysicalNetworkAdapter, add-VDSwitchVMHost, E...

  PS C:\ > get-vitoolkitversion

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 6.0 Release 2 build 3056836

  ---------------

  Component versions

  ---------------

  VMWare AutoDeploy PowerCLI component 6.0 build 2358282

  VMWare ImageBuilder PowerCLI component 6.0 build 2358282

  VMware vSphere PowerCLI component 6.0 build 3052101

  VDS's VMware PowerCLI component 6.0 build 3052101

  
  

  PS C:\ > (get-command * vmw *) .count

  33

  
  

  R1:

  PS C:\ > get-module

  Version of Moduleinfo name ExportedCommands

  ---------- -------    ----                                ----------------

  Script Initialize-VMware_VimAutomation_Vds 0.0

  Manifest 3.1.0.0 Microsoft.PowerShell.Management {Add-Computer, Add-Content, Checkpoint-Computer, Clear-Con...}

  Manifest 3.1.0.0 Microsoft.PowerShell.Utility {Add-Member, add-Type, Clear-Variable, Compare-Object...}

  VMware.VimAutomation.Core manifesto 6.0.0.0 {Add-PassthroughDevice, add VirtualSwitchPhysicalNetworkAd... }

  Clear VMware.VimAutomation.Sdk 6.0.0.0

  6.0.0.0 binary VMware.VimAutomation.Vds {add-VDSwitchPhysicalNetworkAdapter, add-VDSwitchVMHost, E...

  PS C:\ > get-vitoolkitversion

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 6.0 Release 1 build 2548067

  ---------------

  Component versions

  ---------------

  VMWare AutoDeploy PowerCLI component 6.0 build 2358282

  VMWare ImageBuilder PowerCLI component 6.0 build 2358282

  License of VMware PowerCLI component 6.0 build 2315846

  VMware vSphere PowerCLI component 6.0 build 2548068

  VDS's VMware PowerCLI component 6.0 build 2548068

  PS C:\ > (get-command * vmw *) .count

  12 p

  Hello

  First of all, I must say that you are right. This is a regression introduced in 6.0 R2 caused by updates in the manifesto of the module which target to attack another bug. Let me give you more explanation in detail on the specifics of the module VMware.VimAutomation.Core.

  Binary VMware.VimAutomation.Core is always snap-in in 6.0 R1, 6.0R2 and 6.0 R3. Which is related to internal constraints that will be overcome in the next version and the binary file is converted to module as it should.

  As binary VMware.VimAutomation.Core is pluggable PowerCLI makes it look like a module declaring a manifest module which load the snap and load so its commands to load this module 'false '. The VMWare.VimAutomation.Core module so manifest module powershell that refer to a script that loads the binary VMWare.VimAutomation.Core snap. Script files, the manifesto and that loads the snap are in the module folder: '\Modules\VMware.VimAutomation.Core '.

  Now the problem you face is that, in 6.0R1, the script that loads the snap was referenced in NestedModules module manifest, which means that all orders imported as nested module are imported into the scope of the module session. This makes the component controls snap to consider as a command module and that's why your use case has worked with 6.0R1. The problem with this is that if someone calling Remove-Module command for this module it deletes the orders of the current session, and if Import-Module is called again in the same session, that it will fail with an error "The VMware.VimAutomation.Core is already added," so no commands are loaded once the module is removed from the current session. Because of this bug, we decided not to reference the script component snap load in NestedModules but in ModulesToProcess of the module manifest. When it is referenced in the ModulesToProcess that makes the script commands to be loaded in the scope of global session which means that these commands are removed from the session when Remove-Module is called and if Import-Module is called once again he will not fail because the module manifest try again to load the sanp-in. When the controls are respectively in the context that they are not affected by the specification of modules and that is why they cannot be imported with the desired prefix you want.

  To be honest we didn't know this side effect when we discussed the initial bug with Remove-Module. All these problems will be solved in the next PowerCLI release when binary VMware.VimAutomation.Core will become the module. Until then, I suggest you workaround with fixation of the VMWare.VimAutomation.Core manifest file. To do this you have need open and change of \Modules\VMware.VimAutomation.Core\VMware.VimAutomation.Core.psd1

  the following way:

  1. set ModuleToProcess on a string is empty

  2. put NestedModules to @('VMware.VimAutomation.Core.ps1')

  This will make the module to behave in the same way as 6.0R1

  Kind regards

  Dimitar Milov