As I unlock my external hard drive with Bit Locker Drive Encryption, I get an error.

Similar Questions

• I am trying to create an image of my computer on an external hard drive, but I get an error message: 0 x 8007003 path is missing

  I used to assess the problem, but it is Mr. fix: component of windows update is missing and he fixed it.  Still, I can't back up the C: drive.

  Hi Angela,.

  What operating system you have installed in the computer?

  This problem occurs if you save a library that contains custom folders that are located under your user profile. Please refer to the article to resolve the problem. The instructions apply to Windows Vista or Windows 7.

  Method 1:

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  http://support.Microsoft.com/kb/973455

  Method 2: Temporarily disable the security software and firewall settings and check if the Internet connection drops.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  For reference:
   
  Considerations when creating a system image

  http://blogs.technet.com/b/filecab/archive/2009/10/31/learn-more-about-system-image-backup.aspx

  Post back if the problem persists, we will be happy to help you.

• Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Hello

  I suggest to refer to this link and follow the steps in this link and check if that helps:

  http://support.Microsoft.com/kb/943104

  It will be useful.

• Updated the motherboard, processor and RAM and upgraded to Windows 7 Ultimate 64 bit, after upgrade the external hard drive encrypted with bitlocker will not enter the password.

  Original title: bitllocker Windows 7 issue

  Hello

  I recently updated my motherboard, processor and RAM, but I kept my original 500 GB hard drive, and equipped with a hard drive 2 TB extra, after the upgrade, I downloaded windows 7 ultimate 64-bit. After the upgrade I plugged my external hard drive (which has all my stuff important on it, that is to say the photo, video etc.) to realize that I had he encrypted with bitlocker on my old sysem. It allows Me to enter my password, it looks for a USB flash drive key, I did not. My question is:

  Can I replace my old system with the old motherboard, hard drive and the original RAM to remove the external hard drive for bitlocker?

  I still have the file windows.old on my hard drive, I have to restore it and remove the most recent version of windows 7 off the drive. I do this before I rebuild my old PC? I'm stuck here and would not lose all my photos (the wife would kill me!) I would appreciate your help.

  Hello

  Reassembly of the old computer won't help. You will always need the key to open the Bitlocker.

  You can read the articles and check:

  What is the difference between BitLocker Drive encryption and EFS file system?

  Protect your files using BitLocker Drive encryption

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• External hard drive gives USB not recognized error

  I have a Western Digital Passport 80 GB HD, which worked fine with XP until today.  I plugged this morning and received an error not recognized USB.  I followed the troubleshooting tips and online help.  It seems that in most cases, if you go to computer management / disk management, you can see the external hard drive.  This is not the case with mine.  I don't see the player.  I downloaded the recovery software, but everything is based on the premise that the drive appears.  Mine does not work.  Can someone help me?

  Thank you.

  Unfortunately, this drive has probably went wrong.  Have you tried another cable to connect your player to your computer?  It may be a long shot, but it is possible that the cable could be damaged.  You may need to take your car to a specialist in recovery to recover the data.  I apologize for the bad news.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Need help in choosing external hard drive encryption tool (Windows Bitlocker)

  Hello friends,

  I have an external hard drive (model capacity - STBU1000303, - 1 TB Seagate) and I'm looking for a disk security tool so I can encrypt my external drive and protect the password.

  I found a tool Microsoft Bitlocker, so please suggest can make the backup encryption and password for this external hard drive? Or should I try another third party tool?

  Thanks in advance!

  Hello friends,

  I have an external hard drive (model capacity - STBU1000303, - 1 TB Seagate) and I'm looking for a disk security tool so I can encrypt my external drive and protect the password.

  I found a tool Microsoft Bitlocker, so please suggest can make the backup encryption and password for this external hard drive? Or should I try another third party tool?

  Thanks in advance!

  See the following link.

  Getting started with BitLocker Drive Encryption:

  http://TechNet.Microsoft.com/en-us/library/dd875544 (v = WS.10) .aspx

  "You can use BitLocker to encrypt fixed data (such as internal hard drives) drives and removable data (such as USB and external hard drives, flash drives) drives. To encrypt a data drive, it must be formatted by using the FAT, FAT16, FAT32, or NTFS file system and must be at least 64 MB in size. »

  Use the menu on the left side of this page to view other items all the information on the use of Bitlocker.

  Concerning

• How to check the progress of process for external hard drive encryption?

  All I see is "encryption...". "when I right click on the hard drive."

  From the terminal

  Applications/Utilities/Terminal.app copy and paste:

  diskutil cs list

  http://Apple.StackExchange.com/questions/60683/how-to-view-progress-when-encrypt ing-a-disc

• Seagate external HARD drive expansion will not identify Windows 7 x 64. OK in a first time and fine on Vista x 86.

  Recently installed Windows 7 Home Premium x 64 Vista Home Premium x 86. Under Vista, everything was fine. Less than 7, my Seagate expansion (1.5 TB) hard drive initially was recognized (I have iTunes library I can't play to prove :)) after a few days using 7, however, I lost the external HARD drive. I get the error message is "software device driver is not properly installed." In Device Mgr, it says it's an "unknown device" with the yellow! triangle. "Windows has stopped this device because it has reported problems. (Code 43) "appears in the details of the device. No updated drivers are available. Windows updates are up to date, nothing helps. Restart, reinstall, restore driver, deactivation, nothing works. Tried to update my BIOS, but it is already the latest version of Dell. Trying any other Dell Update, what it offers is the Download Manager, but not actual updates I select. I'm not allowed to use this player all of a sudden, after that it worked fine for a few days!

  Specific features of the system are as follows:

  Name of the operating system Microsoft Windows 7 Home Premium
  Version 6.1.7600 Build 7600
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  System name PHIL-PC
  System manufacturer Dell Inc.
  Inspiron 530 s model system
  System Type x 64-based PC
  Processor Intel (r) Pentium (r) Dual CPU E2180 @ 2.00 GHz, 2000 Mhz, 2 Lossnay, 2 logical processors
  BIOS Version/Date Dell Inc. 1.0.18, 24/02/2009
  SMBIOS 2.5 version
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume3
  Hardware Abstraction Layer Version = "6.1.7600.16385".
  Physical memory (RAM) installed 4.00 GB
  Total physical memory 4.00 GB
  2.54 GB available physical memory

  Thanks in advance for any helpful info!

  All this occurred within three days of using Windows 7 x 64, so I don't think there is a previous restore point to go back to. However, I would not I install updates to be rendered unusable and allow my system, and their insecurity. And, as stated in my original post, I have gone through the drivers to uninstall or disable normal, remove, reinstall, etc. etc. without help.

  An update my original post, I finally got the unit of work, although not as fast as it was in Vista x 86. I did back up the device to a laptop from Vista Home Premium I have, let it load the drivers it needs, and then after reconnection to 7, it has been working well, but overall slowly in read/write functions and clicking on a lot more than he did primarily when operating. What I went through get this thing to work, I think that the currently loaded driver is for a 32 bit OS, and there is no update (again) for 64-bit. I leave it alone, because it is functional, and if it is not recognized after the next set of Windows updates, I guess I have to restore to a previous image.

  Dell doesn't seem to have anything for her, and Seagate plans explicitly on their site that they don't provide drivers for this HARD drive while referring to Microsoft or the manufacturer of the equipment for drivers.

• 0x8078012D error code when you back up the new pc for external hard drive

  I have a brand new HP Pavilion Windows 7 Home Premium desktop/8 GB memory/1 terabyte hard drive. Just hung up 3 days ago, and after installing my software, attempted to perform a full backup with the image of a brand new Toshiba Canvio 500 GB external hard drive. I get 0x8078012D error code, without interruption.  I did a check on the external hard drive disk, and it was good. I did a check for virus on the external hard drive, and that was good. I have triple checked the settings for backup and they are as I want them to be. -What is the Toshiba external hard drive or my bad nine HP desktop computer?  I had to call HP tech support yesterday as 2 programs, I had already installed has stopped working, but also Java and Adobe Flash Player. HP technical support was not only bad in his work, but right has supported up and hard with me and talked to me. I told her to give me control of my computer and down the phone that I reported him. He wrecked settings that I had, I did a system restore on the eve of the appellant, which was day 2 of owning the new pc. Now everything works as it was and I think that the 2 programs stopped working due to a Microsoft update that I had done that day. I don't have re-uploaded the 6 latest updates from MS and pc seems to work very well, but I can still save on the Toshiba Canvio external hard drive. Last resort, I reformatted the Toshiba Canvio to NTFS, even if it has already formatted to. Still can not make a backup on the external drive. I don't know what to do. Return the pc?  Return the Toshiba Canvio?  I'm in debt $650 for these 2 pieces of metal. Help please!

  Hello

  The error would have occurred if the services related to backup Windows could have been disabled. This can also occur due to other security software installed on the computer.

  Y at - it a third-party security software installed on the computer?

  I suggest you to check if the services are running and in manual mode.

  You can follow the methods:

  Method 1:

  Follow the steps to check if services are running. If not, restart them and check if that helps:

  (a) click Start.

  (b) type Services in the start search.

  (c) in the Services window, search for the shadow copy volume.

  (d) right click on the Service.

  (e) click Properties.

  (f) select Start on ManualType.

  (g) click OK.

  (h) now repeat the same steps for Windows backup service as well.

  Check if you find the same error trying to save using the hard disk. If Yes, proceed to method 2.

  Method 2:

  I suggest to temporarily disable the security software installed on the computer and check if it helps. Check out the link to do so:

  http://Windows.Microsoft.com/en-in/Windows7/disable-antivirus-software

  Important note: security software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  It will be useful.

  Just reply to us with the results. We will be happy to help you.

• Eject external hard drive

  I have a brand new MacBook Air, I bought only a couple of days.  I've been sorting through photos using my external hard drive and I get messages saying "hard drive not ejected correctly" even if I have not disconnected it.  I had this drive hard for a few years and never had this problem before, so I have to conclude that this is the new computer.  I've seen this question asked a few other places, but cannot find a resolution-nobody knows how to solve this problem?  Thank you!

  Have you tried all the USB ports?

  Have you tried different cables?

  You can make an appointment with an Apple store genius bar and technicians evaluate the MBA.  Put the drive external HARD with you.

  Ciao.

• Cannot transfer files to an external hard drive to a second and the error is "error copying file or folder. "Impossible to copy ' file/folder name.

  Original title: cannot transfer files to one external hard drive to another

  An error message is displayed: "error copying file or folder." Impossible to copy "file/folder name. "The destination folder is the same as the source folder.

  Peter Tiedemann

  Hi Peter,

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you are unable to transfer files from an external drive on another drive. Please let me know if this isn't the problem that you are experiencing.

  Before troubleshooting, I have little information on the issue.

  1. Do you receive any error or display message?
  2. Did you recent hardware or modifications to the software on the computer before this problem?

  Try the methods and then check after each method:

  Method 1: Transfer files from a drive to the location on the desktop or a temporary folder and then try to transfer them to the destination disk.

  Note: make sure the free space on the disk in the destination drive.

  Method 2: Run the Fixit:

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  Method 3: Disconnect your player safely, and restart the computer. And then try to transfer the files.

  If the problem persists, post your reply with results and questions above. We are happy to help you further in the advanced troubleshooting steps!

  It will be useful.

• Windows Live OneCare restore tool does not recognize my external hard drive USB

  Vista recognizes the external hard drive where I have a stored Live OneCare Backup folder, but OneCare restore tool doesn't like a local disk.

  When I turn on network sharing for the external hard drive, I can get him in the OneCare dialog box, but it still does not recognize a backup folder.

  What kind of folder don't restore OneCare search, one called Windows OneCare Backup or any of the subfolders?

  http://social.Microsoft.com/forums/en-us/category/windowsliveonecare/

  Above is the care Forums a Live.

  http://social.Microsoft.com/forums/en-us/onecarebackupandrestore/threads

  Windows Live OneCare Backup and restore

  They will help you in the Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• I lost my bitlocker password and saved the key to my external hard drive. This happened after I formatted my pc and installed windows 7, I need to unlock the hard drive... what to do?

  previously, I had windows 7 and I was testing bit locker on my external hard drive. now that I formatted my pc, my external hard drive requires password or the key, which do not have them with me I need to unlock this bad disc... Please help me...

  You should have saves CERT, as you were warned to do when encrypting the drive. Creating a "password reset disk" would have done, too. (I hope you're not expecting to break bitlocker encriptación :)

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• I've just backed up with an external hard drive for the first time, but my profile with my folders for photos, documents, and movies are not there

  Hello

  So, I finally got an external hard drive. I formatted for Mac (the device has been verified as being correct), and then he started to do a backup, which stated that a full backup would take 95GB. However, it only supported 19GB.  When I have my 'open' backup drive, I saw that only 'Macintosh HD' received support upward, not my user profile with all my folders containing documents, photos, movies, etc...

  I'm quite confused, because I thought that it would save.  I plan on Snow Leopard update to El Capitan, but if something is wrong or I don't like, I'm afraid that I won't be able to restore all my personal files - but only the applications that are on my Macintosh HD.

  Should I delete everything in my backup disk and try again?

  This is an image of what's inside my external hard drive:

  

  You have not indicated how you have saved, if you've used Time Machine then you do things the hard way and you'll find very difficult TM. Please use the Time Machine interface to locate your saved data. You can benefit from the research on:

  Use Time Machine to back up or restore your Mac - Apple, Support the section you want to find is the restoration section.

• Using an external hard drive with El Capitan

  I connected a Toshiba external hard drive in a macbook pro with OS X El Capitan 10.11.6 to back up some files.

  First, he asked if I wanted to use it for time machine. I selected "decide later".

  Then, I realized that I could not create a new folder on the hard drive, or I could stick anything on it (to save).

  I could copy the HD stuff and paste on my desktop only, but not what I need...

  What is a typical problem? Is it because I chose to decide later? Has anyone encountered this before?

  (p.s. Please also indicate if the question category, I chose should be changed)

  This means generally that the volume is formatted to NTFS, at which case it must be reformatted or software such as Paragon NTFS installed on the Mac. To check, select the volume in the Finder, choose information, look at the format.

  In case this happens to a FAT32, exFAT or volume Mac OS extended, either the volume's directory structure is damaged, it is locked in the material or the player has felt that it is about to fail.

  (144796)