Strong static, crackling sound when the TV is turned on

Similar Questions

• Popping / crackling sound when the Satellite L650-1PQ is connected via HDMI

  Hi all

  I have recently connected my laptop to the TV via HDMI, and I hear his pop/cracking every time the music, video or games is played. I tested the speakers with my MP3 player and the Xbox, and there is no POPs or crackles when I'm with them.

  I've updated to the latest drivers from Toshiba, but it has not yet resolved the issue.
  Any help would be greatly appreciated!

  Care of my system is as follows:

  Processor: 2.66 GHz Intel Core i5 480M
  RAM: 4 GB DDR3 RAM
  OS: 64 - bit Windows 7 Home Premium
  Graphics card: ATI Mobility Radeon HD 5650

  > I have recently connected my laptop to the TV via HDMI, and I hear his pop/cracking every time the music, video or games is played

  The crackling is in from the TV speakers. Right?

  Can you hear the Crackle even using headphones or speakers for laptop?
  If not, then I think that this problem could be related to his driver.

  In your case, I would check the settings in the control panel-> sound-> playback-> audio digital-> set up

• New laptop Satellite C50-A-1CK Fan make a static/crackling sound?

  I recently introduced a new laptop Satellite C50-A-1CK the December 8,.

  I didn't use the phone a lot.
  I noticed in the last days the fan made a static/crackling sound power, seems to come from the fan (on the upper right corner) when it turns.

  Is this normal?
  I think back to the retailer and asking for Exchange?

  Just for looking for some advice, much appreciated!

  Thank you.

  > Is this normal?

  No, this isn't a common behavior of laptop and I don t think that the sound or noise is normal.

  > I think back to the retailer and asking for Exchange?

  In my opinion it s certainly a good idea to check another unit and compare appearances of noise

• We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple ID

  We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple - ID we buy apps and music coming from the same account. It all works very well, but we don t like any other device to RING eveytime a phone rings.

  Thank you so much: D

  ON both phones, check the settings > phone > call on other devices > Off.

• Manufacture of extreme dual band 802.11 airport "buzz sound" when the power supply is attached

  Hello

  which is very probably wrong with my Airport Extreme?

  My Airport extreme dual band 802.11 done "buzzing" sound when the power supply is attached. The sound disappears immediately when power is disconnected and begins as soon as you connected again. It started two weeks ago, and it's really annoying.

  THX,

  Laura

  Most likely, the question is a bad capacitor in the diet. These can fail and are, unfortunately, not serviceable by the user... unless you have experience with electronic repair. You can try Apple, but chances are that you will have the best chance to get a replacement from another source, such as Impact Computers & Electronics or eBay.  I'm sorry.

• Internal speakers work but no sound when the headphones are connected.

  Internal speakers work, but no sound when the headset is connected Mr. fix gives a clean and level flight controlpannel indicator report / sound show sounds present but no sound on 3.5 mm jack audio 6.0 vista Home Basic travel mate acer 2480 laptop.

  Ive seen to be a common problem and have tried everything short of putting my computer or the cabel in the freezer for this problem, although I had an old pair of computer speakers that the power of the headphone plug in my garage-30 and a jack 3.5 cold didn't help.

  Most recent driver realtek audio and Manager running audio acer, everything seems fine all levels on and not cut anything off
  Lists of control pannel/sound/speakerproperties
  control information
  Realtek High Denifnition
  Reatek'a

  Jack information
  LR ATAPI internal ATAPI
  LR 3.5 mm Jack (will disappear if not plugged headphones\auxcabel)

  some levels are muted
  Advance tab default settings
  quality of studio 24 bit 48000 Hz

  boxes of exclusive mode checked (when it is disabled, that no sound was heard)

  Information appears a jack was pluged into and when unplugged.

  the computer knows its their and it shows his work but ive tried several pairs of headphones, including the new ipod with the remote, I tried an old pair of speakers that have no other energy source that 3.5 mm cord all work witch on my i pod, I also tried pluging in a splitter first and also an adapter to use a guitar cord pluged amp in an another apapter back down to 3.5 mm a little stupid and redundant but I didn't lie when I said I TRIED EVERYTHING I could think maximum\ read forums\ many watch on youtube.

  computer repair guy told me that fault call manufacturing equipment but guaranteed was 2 weeks upwards.
   
  I do not think it is a matter of hardwear tho and am convinced that it can be resolved is so close to work, I'm sure there must be a setting or patch or codec sumthing that will correct the problem, but it's my first (LIRA) ask for help.

  With frequent this problem or other similar appear from what my research has shown that I don't know that it can be resolved, or millions of laptops with drivers realtek audio hd are all defective.

  My next try is an external usb sound card. I tried already but no stores in my area have them (Wal-Mart, the source, Staples), all had never heard what I was talking about. I saw on the web less than 5 dollars but have no confidence in the sites offering the devices. Has anyone bought from a trusted site.  could talk to the teak of microsoft but they wanted to charge me $ $50 so decided to save money to buy a card usb sound, if I can't solve the problem.

  Sorry for any ignorance or typos and long reading but I hope someone can help with this problem

  Check with the manufacturer of your system's support and their forums (if any).

  Have you checked on the website of the manufacturer of the device for the latest drivers?

  Realtek - HD Audio Codec Driver right side
  http://www.Realtek.com.tw/

  Download - SAVE - will click with the button straight on and RUN AS ADMIN

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.
  Rob - bicycle - Mark Twain said it is good.

• My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it

  Original title: HDMI sound

  I know that many have had problems, but I did not mine specifically. My HDMI connection was working fine with my laptop HP and m HD tv. I didn't use it for a while, now it is just the video, no audio on the TV. My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it. Ive read all the reviews and updates of pilot who was old. I don't know what else to do!

  Hello

  System Restore does not have this long period of time.

  You may want to refer to the suggestions in the thread below link and check.

  No sound via HDMI output portable computer connecting to TV

  I hope this helps.

• Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera focuses

  Hello, I have problems with my Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera is focusing. If I put it to my ear, the sound is low but I can still here it when it focuses.

  Hello

  Thanks for posting in the Microsoft Community Forum.

  I understand from your description, that you get beep when the camera is focusing.

  To better understand the question, please answer the following questions:

  1. have you made changes on the computer before this problem?
  2. is it works much earlier?

  Come back with more information to help you better.

  I suggest you to download and install the latest drivers for Microsoft Lifecam 5000 from the link provided:

  http://www.Microsoft.com/hardware/en-us/d/LifeCam-VX-5000

  You can even try recording by reducing the volume on the computer to the minimum level (mute) just to check if beep occurs.

  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

  For more information, see the link below:

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-Setup

  Hope the above information is helpful. If you have any question back to us, we are happy to help you.

  Thank you.

• Microsoft ON essential to keep all the time automatically, when the PC is turned OFF? I don't know to do.

  Dear Sir/Mam...

  I installed Microsoft essential to protect my notebook of virus & spy ware. When I turn off my laptop sound off automatically. Please send me the details to keep essential Microsoft on all the time, even my laptop is OFF please. Icon for turn on essential Microsoft whenever I start my computer. I can't find the related parameters in the ICONS.

  Once a computer is turned off, it's... Well well, off the coast.  But not just asleep, off.  By the definition of 'off' it does nothing.  Microsoft Security Essentials is a program and only works when the computer is turned on, as all of your other programs.  You cannot run a program when the computer is turned off.  The good news is that a computer is turned off is completely protected against malware are malicious software programs and does not work either.  There is absolutely no need to have anything by protecting your computer when it is turned off.  That said, I think that your concern doesn't really MSE all the time, but that's automatically done already when you turn on your laptop.  Not to worry.

  You see the pop-up warning that MSE has not yet started Microsoft.  If you click on the Start button in the pop - up notification MSE should start (but not immediately).  It may take a minute or two.  If you wait just MSE must start with itself and the notice will go away without having to do anything.

  I see the same thing when I run one of my virtual machines that you see when you start your laptop.  I'm very familiar with it.  It goes away in a few minutes and only means that from MSE wasn't the first thing the computer did when I turned on.  Windows moves to finally start MSE, but you can the long hurry up if you want.

  To manually start Microsoft Security Essentials, find its icon on the lower right side of your taskbar (called the "notification area").  The icon looks like a Red House with an X on it.  Right-click on the icon and choose open on the pop up list.  The MSE window opens on the desktop.  Click on "Start it now" button in the window that appears.  The window fades.  It may take a little time to start the MSE.  When everything is OK, home in the notification area icon will turn green with a check mark.

  When I see the Red House, I usually just give the computer a few minutes to complete marketing and the problem goes away on its own.  On rare occasions I start MSE myself.

  Colin Barnhorst

• Unable to receive calls from Apple Watch, using WIFI AT & T calls, when the iPhone is turned on, turned off or in Airplane Mode.

  I work on this issue and wanted to involve the community.

  I have tests the functionality Apple Watch and have been unable to solve my problems with WIFI call. I use the AT & T and I am connect to the strip of the 5 GHz on my router Xfinity.

  I am able to make/receive calls from my iPad and Mac laptop when iPhone is off / Mode plane; However, this feature does not work on the watch. I can make and receive calls from the watch when the phone is turned on.

  Another problem is that I am not able to send and receive messages (blue or green bubble) of the watch - once again when the phone is turned off or in flight Mode

  I'll copy in 2 portions of the Web site: http://help.apple.com/watch/

  http://help.Apple.com/watch/#/apd0443fb403

  If your Apple Watch is in range of a Wi - Fi network that the iPhone is connected to before, you can always do the following (even if the iPhone is off):

  • Send and receive digital messages Touch
  • Send and receive messages using Messages
  • Make and receive phone calls (if you have active calls, Wi - Fi, and you are within range of a Wi - Fi connected to your iPhone before)
  • Check current weather conditions
  • Track your inventory

  http://help.Apple.com/watch/#/apd2fe746e86

  Make calls via Wi - Fi

  If your cellular operator offers Wi - Fi calls, you can use Apple Watch to make and receive calls over Wi - Fi instead of cellular network - even when your pair iPhone isn't with you or is disabled. Apple Watch comes to be in range of a Wi - Fi network that is connected to your iPhone in the past.

  To see if your carrier offers Wi - Fi calls, see the article Apple Support phone with Wi-Fi calls, then enable the calls on your iPhone and Apple Watch Wi - Fi.

  Note: You can make emergency calls via Wi - Fi, but when possible, use rather iPhone over a cellular connection - your location information will be more specific.

  Enable on iPhone Wi - Fi calls. On iPhone, go to settings > phone and turn on Wi - Fi calling and application to other devices.

  Enable calls on Apple Watch Wi - Fi. Open the Apple Watch app on iPhone, tap My Watch, tap phone, then turn on Wi - Fi calls. If you do not see the parameter, make sure that you have activated calls on iPhone Wi - Fi.

  Answer please if you are able to perform any of these functions! And any troubleshooting you can think!

  AspiringAppleGuru wrote:

  I have... to connect to the 5 GHz on my... router bandwidth.

  Hello

  These features are not available because Apple Watch cannot connect to a network of GHz Wi - Fi 5.

  If your watch is not connected to your iPhone via Bluetooth, but lying in a 2.4 GHz Wi - Fi network your iPhone plugged in before, the watch can connect to this network and you can continue to use certain features, including Wi - Fi calls (when it is supported by your operator, you already have in place).

  More information:

  On Bluetooth and Wi - Fi on Apple Watch - Apple Support

  Use Apple Watch without her sister iPhone - Apple Support

• Satellite Pro U400-11V - charges only battery when the computer is turned off

  Following a reformatting my hard drive of the computer, my laptop recognizes only the AC/DC power adapter when it is turned off. When the computer is turned on, it does not recognize the AC adapter.

  Changed the power supply ac and it made no difference.

  Have also tried an update of the BIOS (3.0), I am running Windows Vista 32 bit.

  Hello

  I doubt it has something to do with the software or the operating system. In my opinion, that this looks like a hardware problem, because the battery will be always charged if AC/DC adapter is plugged in. That's why it of not necessary to enable this setting in the configuration of the software.

  If your BIOS is already updated, contact an authorized service provider. Technicians can check your laptop and maybe the motherboard needs to be replaced.

• Tecra A5 - charges the battery only when the computer is turned off

  Hello

  For a few days, my Tecra A5 has started to beep and stop it (like when the battery is low) then that it was connected to the power supply adapter.

  I finally realized that when the computer is plugged in, the battery discharge and does not use the power supply to recharge.

  On the other hand, if I turn off the computer, the battery starts to charge.
  I replaced the battery a few months ago, so I think it's still OK.

  The charger would be defective? Seems strange since it can always recharge the battery when the computer is turned off.

  Thanks in advance for your contributions.

  > The charger is defective?

  Theoretically; Yes, but could also be electronic supply on the motherboard is affected, but on the first stage of the AC adapter should be verified and laptop needs to be tested with AC adapter new, good work.

• Satellite P30 seems to completely charge the battery only when the unit is turned off completely

  Hi, I have my Toshiba Satellite p30 and only works on battery. This unit operate on sector or only on the battery as after the period of time go down the warning, then closes. The orange light fades in and out, but seems that it will only fully charge when the unit is turned off completely.

  I only just received this unit so bit of a novice.

  MASH

  Hello

  normally, the battery should always charge until it is full when the power is connected.
  If you have an orange light flashes, it means that something is wrong. Maybe your battery is faulty or something else. This should be checked by a technician.

  Good bye

• My Ipad charger charge my iphone 5s only when the phone is turned off

  Hi guys. My Ipad charger charging my iphone 5s only when the phone is turned off. The phone does not recognize if it is on and I can't transfer files with it. Help, please?

  Hey Bigfootinyourface,

  I understand that you have a problem with your iPad charger or cable. Accessories and connectors uncertified can often result in the mentioned behavior. Article in the link below provides information that you may find useful.

  Identify the fakes or not certified lightning connector accessories
  https://support.Apple.com/en-us/HT204566

  See you soon!

• Vista and Color Laserjet 5 M reprints all when the printer is turned on?

  Vist and Color Laserjet 5 M reprints all when the printer is turned on?

  It is a new one on me. I installed the printer with a barrette SIMM Postscript so it would work even at all under Vista and now it prints well but insists on the fact that I have all re - print he has never seen a reason any whenever I turn the printer to print something again.

  XP he has never done that, but I've always had the document cannot print the error that I ignored as he did print correctly.

  Google has not really revealed anything?

  ?? Type response level 1 I was looking for... These printers are a full restart, test of memory and when it is off.

  But I think I solved it, spent some time on google and there was a suggestion on the spooler in vista, was something like clear keep printed documents or print spooling first, I went also to start printing after the last page. Who took care of a lot of it somehow. Not sure why the generic installation program would need to be changed here. Possible I did for me somehow when I was trying to get the thing to work with the PCL driver too.

  Then I noticed that whenever I turned on the printer it is printing a page of demo postscript, for some reason any, it is enabled by default in the SIMM option. Turn power off and now its not wasting so much paper now.

  So two things to look for in the computer and the printer.