Y at - it a way to allow the establishment to continue playing while multitasking.

Similar Questions

• Is there a way to allow the members of a role to be reviewers of a document?

  I have a workflow which notify the user when it is released. The workflow should simply inform the user of the document was checked in the system and can be viewed. There is no action to be taken place by them. However, I see that you can only assign a user or alias of a workflow, but we use the list of role (xClbraRoleList) access to our security.

  I have an email address for notification of workflow should be sent, but the e-mail address is for a group.

  Is there a way to allow the members of a role to be reviewers of a document? Can you use tokens to get there?

  Kind regards

  Sandra

  Good so how about having an alias in your email tell [email protected] system, which can have several users under this alias and so on for the other departments. On the side of WCC, you can have a single user per Department and assign this ID e-mail as ID the user's e-mail alias and so on for the other departments and then use those users in your notification of workflow.

• Whenever I try to download it says that there is a virus attached and will not allow the download to continue.

  Whenever I try to download it says that there is a virus attached and will not allow the download to continue.  It only gives me options other than come on the Microsoft site.  Help!  How can I fix this problem without having to lose all the information stored on my computer?

  Original title: download questions

  Whenever I try to download it says that there is a virus attached and will not allow the download to continue.  It only gives me options other than come on the Microsoft site.  Help!  How can I fix this problem without having to lose all the information stored on my computer?

  Hello

  It would seem that you are infected with malware.

  Read the answer in the link by The ball

  http://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/i-get-error-message-xxxxxxxx-contains-a-virus-and/fbb5e0fd-63bd-4E01-9a98-6074d33a8fd6

  Your PC is probably infected with the new variant of Sirefef AKA Zero access. The authors scheduled to turn several times a day to help him avoid detection by anti-malware programs.

  See http://www.microsoft.com/security/portal/threat/encyclopedia/entry.aspx?Name=Win32%2FSirefef

  Suggest you use HitmanPro Kickstart, which should remove this malware and fix changes made to the computer by the malware: http://www.surfright.nl/en/kickstart , you must use an uninfected computer to download it to a flash drive and then follow the specific directions on how to run the program on the infected computer.  Hitman Pro Kickstart is available as a 30 day trial version.

  See http://dl.surfright.nl/Kickstart-FAQ.pdf and http://dl.surfright.nl/Kickstart-User-Manual.pdf

  Good luck...

  
   

  http://ask-Leo.com/why_did_i_get_infected_even_though_i_run_antimalware_software.html?awt_l=Bg3x_&awt_m=JrWyqK6R8ZdfbL

  See you soon.

• INTERFACE design - what is the best way to allow the user to define a kind of infusion at various times (non-periodic)?

  I want to allow the user to specify a curve like this:

  

  Such as some under - VI shows the A2 value when a variable of time is between R1, A1 when the time variable is between A2 and A3 when time is in the range A3.

  My design looks like this:

  

  With the error checking that looks like this:

  My question is, is the approach of the table according to optimal? Otherwise, how could combat this?

  I think I can summarize the conversation on this point as a response to the original question (what is the best way...) -to start writing code, to think about what you want to accomplish and write it down (otherwise known as 'Write the first Documentation').  One of the points of a good User Interface is that it is not allow users to "stupid mistakes" - it leads the user "by hand", limiting the entries to the "legal values" and demanding that the entries be made logically.

  If you were going to have a list of Infusions to enter, it is therefore logical to decide or not to enter into time intervals (which are always > 0) or order the times (which, logically) are still growing.  You can (and should) decide that you (or you may have a control that allows the user decide, but maybe it's too flexible) and then apply your "rules".

  Let's say you've decided on "Intervals" (which seems to me to be more User Friendly).  After the user has entered the intervals (and you've provided a nice plot of perfusion vs. time), pouvez allow you the user to an interval of 'split', 'Delete' an interval, or "Edit the Infusion" interval, or you can decide to have a choice more simple "accept or start again" - If you have only a few intervals, the last would be the simplest (and therefore best) design choice.

  Spend more time thinking before coding usually pays Big dividends!

  (Speaking of sad experience) Bob Schor

• Is there a way to allow the end user to change the font color in a text field?

  I didn't know that LiveCycle existed yesterday so I was using the Google a lot.

  I'm building an application form and asked if there was a way to change the font color in a text field. (EXAMPLE: content Original is black.) The notes are in red)

  I have 2 ideas on that, we should type out and highlight, and then click a button to turn red. The other way. I'm more part. Have a radial affecting when turned off, black types. When on, red types. What is the best way to do it or is it still possible?

  Figured it out. Replace 'plain text' 'rich text' and have user support on ctr + e. seems strange to me, but it works.

• Y at - it a way to allow the construction of the 'big size' ThinApp exe?

  At the time of Thinstall, there is an option to allow the construction of the 'big size' Thinstall/Thinapp executables (up to 2 GB, as I called it).

  In more recent versions of Thinstall, this option disappeared entirely, such that you are 'forced' to use a .dat file to be the largest container with a much smaller executable.

  In one of the environments that we are evolving, we must each app will only include a single .exe file without .dat file.

  Y at - it any option ThinApp to disable the mandatory use of the .dat containers?

  When Setup Capture think that the size of the package will be greater than about 200 MB if it suggests the use of a separate data container, you can replace in Capture of installation. Purpose of the icon Entry Point could take up to 20 minutes, until it appears because of the Windows operating system... This recommendation is therefore purely a feature of experience for the end user.

  If installation Capture think that the package will be greater that 1.5 GB Setup Capture will force you to choose a separate data container. Raison d'etre of Windows OS will refuse enforcement of an exe file larger than 2 GB. Our 1.5 GB limit is just to be on the safe side. You can always replace it well... Just manually adjust the package.ini... I don't think our generation process will occupy approximately the size at all. But be aware a .exe file larger that 2 GB will not run and it is a feature of Windows OS nothing ThinApp can do anything.

  To manually replace the 1.5 gigabytes limitation simply get rid of the .dat Entry Point and move the ReadOnlyData = Package.ro.tvr to your .exe Entry Point. Make sure you remove the shortcut = party for the entry Point of .exe so.,.

• Is there a a way to keep the appearance of Firefox 4 while keeping Firefox 8 improvements?

  I'm still on Firefox 4 and I know I should update, at 8, however, I simply don't feel the new look. Is there a way to keep the old look like (tabs at the bottom) and the individual on the top when menus updated? Or I will just to adapt to the new image? Thank you!

  You can have the same look of Firefox 4, even after you update the last 8 Firefox.

  Right-click on it and select menu bar.

• Journal on the sound does not play while preventing the disconnection of its judgment

  original title: error sound system

  When the system connects to sound does not. When the system shuts down, the message that explorer.exe plays disconnection from the sound which is not cancel and I don't force farm system who does not save my work.

  Hello

  1. What is the exact error message you get?

  2. what was the last time that the computer worked well?

  3. are you faced with the question with the sound only when the system shuts down?

  4 did you a recent software or changes to the material on the computer?

  This problem may occur if the .wav file that is associated with the Windows exit program play for more than 10 seconds.

  To resolve this problem, configure the Windows exit program to use a shorter .wav file - play. To do this, follow these steps:

  1. click on Start, type sound in the Search box and then click on its list programs .

  If you are prompted for an administrator password or for confirmation, type the password, or click continue.

  2. click on the tab sounds and then click Exit Windows in the programs list.

  3. click on Browse, locate a .wav file that plays for less than 10 seconds, and then clickOpen.

  Note By default, the following file is used to program Windows output:

  %windir%\media\Windows Shutdown.wav

  4. click on applyand then click OK.

  Access the link below for more information:

  Message when you try to shut down or restart Windows Vista: "the following programs are still running: Explorer.exe playing logoff sound."

  http://support.Microsoft.com/kb/931330

  Note: The above article is for Windows Vista. It also applies to Windows 7.

  Hope this helps and keep us posted.

• Is any way to allow the user, set the value of a null datetime-local field

  Dear all,

  During development, I found that it is not possible for the user to set the value of a field to enter a non-empty value to null datetime-local.

  Take for example, the monitoring scenario

  -User set a track the date and time for a task

  -L' user wants to erase track the date and time of the task.

  But the controller of out-of-the-box made by webworks offers no way for the user to clear the values in the input of datetime-local.

  I would like to know, is there additional information about this limitation, or actually, there is a way to do this?

  Any useful information would be appreciated on this topic.

  Kind regards.

  Lawrence.

  It is advisable to add a "Clear" next to your input control button?

  The input control only allows you to select values for the value.  'Nothing' is not a valid date.

• Best way to allow the new 64 bit Vista Home Premiun PC to work with the software and virtual private networks more elders with unsigned drivers?

  I just bought a new HP PC with Intel E5300 without experiencing compatibility issues with several current VPN as well as blocking drivers not signed properly.  I heard of the Virtual PC as well as the ability to install Vista 32.  What is the simplest, lowest cost way to make this existing work of PC with VPN and unsigned drivers as soon as POSSIBLE with performance at least equivalent to a Pentium 4 2 GHz with 2 GB of RAM?

  http://support.Microsoft.com/default.aspx/KB/946765

  Read the above info on drivers.

  The driver signing

  Unsigned drivers can be used with 32-bit versions of Windows Vista.

  64 bit versions of Windows Vista require that all device drivers be digitally signed by the developer.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  ·                         http://www.Microsoft.com/downloads/details.aspx?FamilyId=04D26402-3199-48A3-AFA2-2DC0B40A73B6&displaylang=en

  Virtual PC 2007

  Download the full version of Microsoft Virtual PC 2007.

  Buy and install a Windows operating system earlier (XP, Windows 2000) in the above Virtual Machine and try to run your program in that.
  Vista Home Premium is not supported by Microsoft using Virtual PC above, but Virtual PC will work in it.

  See you soon. Mick Murphy - Microsoft partner

• What is the best way to allow the user to select other images?

  Part 1: what is the commonly accepted practice to include images in web pages? The insertion/img tag is still the accepted practice, or it makes more use divs with background images?

  Part 2: I want to offer the user the option of images display normally, with inverted colours (as edited by Photoshop) images or no images at all? Here's my idea please tell me if there is a better way. The scenario is a simple tutorial with screenshots, in most cases it will take only one page. The reason is I often follow tutorials like this one, but due to vision problems, I use a Windows high contrast theme. The screenshots seem to be like BLOBs all very bright, white. I would like to create tutorials for others who also use high contrast.

  1. Have the options at the top of the unique links page or a drop down
  2. This defines a variable
  3. In IF statements, wrapping the tag img or divs.

  Seems simple enough. But for the value of the variable is taken into account, that it requires a reload of the page? It seems that the page loads first using the default setting. If so, is there anyway to do this without a reload?

  If it happens that the tutorial extend to more than one page, it would be preferable to write the variable as a variable session, the database entry, a cookie or text file?

  Is it possible to invert the colors of the image without using a separate image? Most of the browsers detect the Windows theme and follow along. They have used to also reverse the images, but pixel-by-pixel - made what appeared to be the mathematical inverse of each pixel. Now, browsers just leave images alone (as well they should). And now that think, they can also ignore any element background and just make the black color instead of any background color or image.

  Thank you!

  1. it depends on what you do, generally with the help of the tag is still a common practice ( and srcset are also available, which gives much more control who sees what, but does not have 100% support yet). Place an image into a background css is typically used if you are going to place the text or other content on the image or make some kind of special effects using css.

  2. you can use some relatively simple css to change all images on your site in versions reversed using filter:invert ()...

  https://davidwalsh.name/invert-colors-CSS

  It does not work in any version of Internet Explorer, but Edge is supported. IE uses a css filter called owner snip: xray that before setting the other setting in your css should take care of the issue, however.

  https://davidwalsh.name/CSS-image-filters-Internet-Explorer

• is there a way to allow the import of iphone and ipad, but only sync a collection for ipad and iphone not?

  I want to import pictures from my iphone / ipad to lightroom, but only the collections of synchronization on the ipad.  My iphone is 'space challenged' so I do not want to synchronize collections on my iphone, but need to synchronize collections to my ipad to share with clients.  Is it possible or are collections sync'd with all mobile devices in the cloud?

  No, but really, what takes place when you set the edition offline. So activate it on the iPad, leave it disabled on the phone.

• I can produce output on the web that allows the subjects to be played directly in the browser, rather than in the context of WebHelp?

  What I have in mind is a minimalist exit which would include only the relevant heading and the Table of contents, but without the top bar. The help files could then accessible in the same way as WebHelp standard, but would have the necessary aesthetic style. If someone could advise on the best way to achieve this in Robohelp, please?

  Hello

  You can try to generate with 'traditional style - no skin' setting.

  

  See you soon... Rick

• Windows DVD maker, the music does not play while the menu is on.

  Make a movie on Windows DVD maker, the only problem is my music, which I have added to the menu does not work. He played during the preview. But not after the film was burned. (The music file was an MP3 of a complete song in my Windows Media Player file) Also, is there a way to make music to play more of the song that I added, as he only play on a second clip 10. Can I do play together somg as long as I keep the menu screen?)

  Make a movie on Windows DVD maker, the only problem is my music, which I have added to the menu does not work. He played during the preview. But not after the film was burned. (The music file was an MP3 of a complete song in my Windows Media Player file) Also, is there a way to make music to play more of the song that I added, as he only play on a second clip 10. Can I do play together somg as long as I keep the menu screen?)

  ==========================================
  It is possible that you have a problem of compatibility with MP3 files...
  convert to WMA format before importation may be worth a try. Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Possible for the AA to continue playing when minimize?

  AA (3) stops playing when I select another program or to minimize.  Is it possible to change this?  I need to be able to view multiple windows while listening to programs registered to compare scripts, adjust the volume controls a sound card, etc.

  I use Reaper as my multitrack DAW and it has no problem to continue reading when I minimize it or click in another application.

  Thank you.

  Ryan

  Go to Edition > Configuration of Audio material and UNcheck the ASIO Driver output box in the background.  Which will make ensure that Audition will keep driver ASIO sound card and not allow it to be "hijacked" by another program.