y at - it no changes on IPSEC command in version 15.4?

Similar Questions

• No emotion, fonts change or change of color in this version?

  They are not available this version? No option for this to change color or change fonts or emotions? Will you help me, thanks.

  Much has changed in Thunderbird since your version was released on March 16, 2010

  The latest version (v38.3 - out September 29, 2015) is available here:
  
  https://www.Mozilla.org/en-us/Thunderbird/

  TB - 38, 3 Win10-PC

• Firefox 25.0 disabled kaspersky virtual keyboard and money safe ect how do I change back to the previous version as fire fox tells you the end of the update

  Firefox 25.0 disabled kaspersky virtual keyboard and money safe ect how do I change back to the previous version as fire fox tells you towards the end of the update to the back Beach

  Hello Bretus,

  Please contact the Mozilla Support and I am sorry that this update is not compatible with the extensions you use.

  Kaspersky support forums mention that these extensions will be updated soon, so that they are compatible with FF25. In the meantime, we do not recommend that downgrade you your version of Firefox, but you can find instructions and download locations for previous versions here:

  Install an older version of Firefox

  Please let us know if this solves your problem.

  Cheers, Patrick

• went from 2015 PS CS3. so many things have changed I hate the new version.

  I'm so frustrated. Has been forced to change computers and from the 2015 PS CS3. I'm on a deadline and so many things have changed I hate the new version. Not an improvement, that I can see. I do a greeting card with many layers and whenever I open the file it is a multicolor search mess - Neon colors acid trip, blocks, especially the file I used last step a new I starts. Go crazy! Can anyone help! Thank you!

  Uncheck the box "Use GPU" in preferences > performance as a convenience cheque. Restart PS.

• How to determine changes in the Acrobat SDK version.

  Hello

  Please let me know how to determine changes in a previous SDK version WRT Acrobat SDK.

  Hello

  The easiest is to read the SDK documentation: what's new for Acrobat SDK.

  Kind regards

  Joe

• change the digital command mode, it is still the initial mode

  In panel.uir, I design a mode of control digital initional as INDICATOR, so I change the control mode to be HOT in my panel.c, but digital is always unacceptible.

  SetCtrlAttribute (systemp2, SEQUINTERVAL, ATTR_CTRL_MODE, VAL_HOT);
  SetCtrlAttribute (systemp2, RBINTERVAL, ATTR_CTRL_MODE, VAL_HOT);
  GetCtrlVal (systemp2, SEQUINTERVAL, &val);)
  GetCtrlVal (systemp2, RBINTERVAL, &rbl);)

  all the two values of val and rbl are nil.

  So how to change the mode indicator to be warm mode in the program?

  In addition, the SEQUINTERVAL is not in the form PANEL_CONTROLID required by the function, so unless it is a variable where you store the correct assessed, function might be unable to translate it into the correct control IDs. Again, return code of SetCtrlAttribute reading should evidence an error in the command. It goes the same for RBINTERVAL.

• Change access to command line network services

  Hello world

  With the help of Server 5 on El Capitan.  I adjust some parameters in the pane of the server. I was limiting the Administration remotely (and screen sharing?) to a specific machine - but made a typo.  The end result has been restricted access to 127.0.0.1 and the incorrect address.  So I can not long remote control administer the machine with the app Server, not with the ARD, and nor can I vnc inside.

  I, however, have ssh access.

  Is it possible to set the IP address associated with the service of the command-line remote administration?

  Thank you

  -Jeff.

  Disable packet filtering:

  sudo pfctl(8) d

  You should be able to connect to remote access. Then restart.

• Windows 7 does not recognize 'change' in the command line

  When you use the command line I try to go to edit to create and edit files, but windows 7 is not recongize edit as a command internal or external, why and how do to the command line editing window.

  The 64 bit version of Windows 7 is not the editprogram (but the 32-bit version only).

  You can run Notepad from the command line.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• changes to the command export file

  Hi guru,.
  
  
  
  The offline backup task ran Sunday last at 07:00 until I have it triggered manually at 13:00.
  
  Thus,.
  
  1. I always want to keep the dump set of 2 files
  
  a. before export / dumping, move the previous dump in the folder "Spider Dump backup set 1" file and delete the existing copy of dump in the folder "Spider Dump backup set 1".
  
  2. the e-mail notification to Support spider after the execution of the work
  
  
  
  Here's my cmd of export file. Can someone help me to make changes accordingly.
  
  

  @echo off
  @echo ----  exp_full.cmd  ------  START  ---------------------
  REM               
  REM     Kjører full eksport av Oracle database
  REM
  REM
  REM
  
  SET EXPDEST=G:\
  
  
  echo on
  echo Eksport startet > %EXPDEST%\exp_full_startet.txt 
  exp SYSTEM/milde5@spider FULL=Y FILE=%EXPDEST%\exp_full_spider.dmp LOG=%EXPDEST%\exp_full_spider.log BUFFER=900000 RECORDLENGTH=65536 statistics=none
  
  
  
  @echo ----  exp_full.cmd  ------  FERDIG ---------------------

  Details of the message of pl of the OS and database versions. PL be aware that exports are not backups. For backups, you must use RMAN

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmintro.htm#CHDBHGGE

  HTH
  Srini

• Global command on version 9.2

  Hello, im set on the road with ASA and I have a problem of concept or a misunderstanding of the version... I have a 8.2 (5) and I have this on my NAT:

  Overall 101 (external) interface

  Now I'm working on a new ASA migrate all configs, but I can't find how to write this command on the new ASA 9.2 (2) 4

  I hope you can help me and sorry for my lack of knowledge on this issue

  Cisco brought significant changes in the way that NAT is configured from version 8.3. So you have the previous syntax on your ASA existing and need new syntax on the ASA News. It should look like this
  NAT source auto after (indoor, outdoor) dynamic one interface

  Be aware that there are also major changes in the way that access lists are configured. So if there are access lists in your existing configuration, you need to be careful about how adapt you to the ASA News.

  HTH

  Rick

• Problem with GRE over IPsec with IOS Version 15.1 (2) T4

  Hello

  We have several sites that use of GRE Tunnels with card crypto for encryption.  To upgrade to the latest version of a UC-520 (15.1 (2) T4 or any version of this train) I get the following error: -.

  SIN-UC520(config-if) #crypto map aberdeen

  % NOTE: crypto card is configured on the tunnel interface.

  Currently, only one card encryption GDOI is supported on the tunnel interface.

  The original Tunnel config is below:-

  interface Tunnel0

  Description Tunnel to Aberdeen AC

  bandwidth of 512

  IP unnumbered Vlan1

  IP mtu 1420

  QoS before filing

  tunnel source a.b.c.d

  destination e.f.g.h tunnel

  Crypto map aberdeen

  Decommissioning of the IOS version solves the problem.   What gives?  Have Cisco dropped support for this configuration?

  I use this setup so I can choose exactly which traffic is encrypted (I do not encrypt voice for example).

  Thank you
  Peter.

  Hi Peter,.

  It looks like from the 15.1 this configuration is no longer supported. Here's what the release notes:

  Error message appears when you try to apply the tunnel interface to a card encryption.

  Old behavior: Error Message is not displayed when you try to apply tunnel interface card encryption using the command card crypto (interface IPSec).

  New behavior: an error message appears when you try to apply the tunnel interface to a crypto map using the

  crypto map command (interface IPSec).

  http://www.Cisco.com/en/us/docs/iOS/15_1/release/notes/151TNEWF.html

  The order reference has the following information about the error message:

  

  A card encryption cannot be applied to a tunnel interface. If you try to apply the tunnel interface to a card encryption, an error message is displayed as follows: crypto card is configured on the tunnel interface. Currently, only card crypto Group domain of interpretation (GDOI) is supported on the tunnel interface.

  http://www.Cisco.com/en/us/docs/iOS/Security/command/reference/sec_c4.html#wp1078283

  So it seems that on the new version, you can only use one (new to me) maps crypto GDOI on your tunnel interfaces.

  Here's a doc that explains the GDOI implementation, I wish that I could help with the Setup, but as I said, I had not heard of him until today.

  http://www.Cisco.com/en/us/prod/collateral/iosswrel/ps6537/ps6586/ps6660/ps6811/prod_white_paper0900aecd804c363f.html

  I hope this clarifies your questions.

  Raga

• I recently did something that changed my Firefox to a version focused on Yahoo. I tried to uninstall and reinstall, but when I reinstalled it is still Yahoo.

  During the summer, I tried to download a free photo colorization program and I think that, in doing so, I accidentally agreed to Yahoo my default browser. My Mozilla Firefox flaw opens on Yahoo and other Yahoo features. I tried to uninstall and reinstall Firefox, but it is always default to Yahoo and I noticed that I have more windows pop up after this connection to Yahoo. I just disappeared and redo my popup settings and will try and change my default screen, but I wish I had my old original Firefox without any Yahoo. For example, say my toolbar File, Edit, View, history, Favorites, tools, Yahoo!, help. I just really want to get rid of the intrusion of Yahoo. On the troubleshooting page I noticed that my Extensions configuration includes the toolbar Yahoo! and RivalGaming, which began to be the provider of many pop ups or independent of opening screens when I click on particular objects or best I wish to see. I want to get rid of both.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• the date is most changed since installing the latest version of firefox

  Since the download of the latest version of Firefox the date on the computer is no longer the Exchange.
  How does a deletions/remove bookmark sites list?

  Hello

  What is the date now?
  Step 1: Make sure the checkbox automatically synchronize with a time server Internet is enabled

  Step 2: You may need to change the CMOS battery. Contact the manufacturer of the aid on that system.

• I have laptop with XP Professional SP3. I need ti change to the U.S. version of the language, help, descriptions... ALL THE

  I use an American program and who wants to egliish (USA) language perfect performance.

  I changed the look of the amounts (1,000.00) in the United States, glance (1,000.00) and date/time and now

  Outlook express checks my German text against engish! But not all, thast U.S. program

  He wants everything in style USA.

  Hi Peter,.

  ·         You have the German version of Windows XP installed?

  ·         You want to change completely in English?

  You can install the Windows XP Service Pack 3 MUI Pack Update and change the display language.

  Download details - Microsoft Download Center - Windows XP Service Pack 3 MUI Pack update

• Appearance of Windows Vista has changed and looks like older versions

  I have no idea how the settings changed, but on my PC at home, a window Vista, the looks of gray appearance, as the older versions of Windows. How can I return records / other appearance of applications for return to the original format?

  Never mind. I just had to restart the computer, and then reopen the appearance settings.