Y430 camera does not
Hi... needed help... .i have y 430 and my camera is nt working... I easy capture installed in my laptop but if you try to open it it says doesn't have a camera initiallization... .easy capture is closed now... and if if press fn and ESC it say camera nt is still installed... .i have not installed the veriface software is that the cause of this problem... .thanks
no prob!
Please, remember to mark as resolved solution.
Tags: Lenovo Notebooks
Similar Questions
-
Updated to IOS 9.3.5 camera does not work on iPhone 6 Plus
Hi just recently, I've updated the iOS software on my iphone 6 and then I noticed that the camera does not just black screen in Meanwhile appeared when changed to video work the two camera when choose photo camera does not however any idea how to solve this problem
You see a black screen or a closed lens
If you see a closed lens or a black screen when you open the camera app, try the following steps:
- Make sure that there is nothing of blocking the lens from the camera. If you use a case, try to remove it.
- Force the application to close, then open the camera again.
- Restart your device, and then open the camera again.
- If your device has a front and rear camera, both cameras by tapping try . If you see the firm objective or black screen on one camera, take your device to an Apple Store or Service provider authorized to obtain assistance.
Get help with the camera on your iPhone, iPad or iPod touch - Apple Support
-
Hi all
I have a 6s model 64 GB iPhone. For some reason, the click of the camera does not work when you take a normal picture. If I have a filter or change a square photo, click works fine, its only when I use the photo without filter mode.
I tried reseting all settings, by turning the lock/keyboard click and outside and adjust the volume of the phone, it just seems to not only work in the scenario above.
Any ideas on how to fix or is this a known bug?
Thank you
Paul
Hello, you can try to do a hard rest before to backup your data.
-
After the replacement of my iPhone screen 6, front facing camera does not work.
After the replacement of my iPhone screen 6, front facing camera does not work. The rear camera works fine, but when I switch to selfie cam I saw a still image of what was on the camera back; and on snapchat it simply refuses to move to selfie cam. I check to make sure that all connectors are deep-set. Any suggestions?
If someone else that Apple will replace your screen they screwed up. If Apple has replaced your take screen back to the store.
-
Camileo S10 camera does not remember the setting of the image stabilizer
Hello reader Forum,.
Is it normal that my Camileo S10 camera does not remember setting image stabilizer?
I use mostly the 720px setting and stabilizing on but after that the camera is off the stabilizer is off again.Greetzz... Ben
Hello
This could be possible.
I remember that the focus does not work if the stabilization has been activated
So maybe it of the intent of the manufacturer that the stabilizer would be disabled again.Welcome them
-
Re: Satellite L300 - camera does not work after upgrade to Win7
As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.
There is no exclamation point in the system.
Satellite L300 (PSLB8E)
Hello
What happens when you start the webcam app?
All programs-> Toshiba-> webcamDid you install other 3rd software part as for example the Skype that could access the webcam?
Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
Start Skype for example, check the settings in Skype webcam chose correctly.It would be really interesting to know if the other software would be able to use the webcam.
By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
Then sometimes it would be possible that this software could block the webcam and webcam tool could not work -
Web Cam does not work on my Satellite Pro C850-10 t
Hey, I have a Satellite Pro C850-10 t and my web cam does not work. Whenever I try to use it, it is said that the built-in cam is not connected or activated. I tried to download the drivers from the site web cam, but it does not solve the problem
What should I do?
Thanks in advance :DDo you use the preinstalled original WIN7 64-BIT HOME PREMIUM?
Webcam is entered correctly in the Device Manager? -
I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer. I use V10.11.3. An idea about what is happening
Hello mpm068,
Thank you for using communities of Apple Support.
Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:
Choose the Apple menu > shut down.
After your Mac stops, wait 10 seconds, then press the power button.
As soon as you hear the startup tone, hold down the SHIFT key.
You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.
Release the SHIFT key when you see the gray Apple logo and progress indicator.
To exit safe mode, restart your Mac, but no press during the startup.
OS X El Capitan: start in safe mode
Take care.
-
I tried to load camera after death, it does not at all, but the orange light is on when it is plugged, let it charge all night and still it won't turn. I videos I would like back, please help.
The charge indicator lights orange when the charging starts. It seems that the battery is charged. Try to turn on the camera while loading and check if it is turn on.
Note: The charging light turns off, charging is completed.
If the camera does not turn ON even when the load is in progress, the service is required.
You can initiate the service from the link below:
You can also contact our telephone support or Chat to try additional troubleshooting procedures.
http://eSupport.Sony.com/us/p/select-System.pl?Director=contact
Please provide model # exact camera while contacting support, so that they provide accurate information. You can locate model # on the back panel and it will start with the letters MHS.
If my post answered your question, please mark it as "acceptable Solution".
-
Satellite A215 S4767 Chicony USB 2.0 camera does not work with Skype
I have a Toshiba Satellite A215-S4767 with Vista Ultimate 32.
I checked the drivers and they work, I have 10 Diretcx and it works.When I open the camera program, it works well.
I put the camera program is not at initial start-up of laptop.
I start the laptop, Skype open and figure that the camera does not work and say to check what I've done.Yesterday, I had installed the Skype 5.5.0.114 version and the camera has functioned well, I upgraded Skype version 5.5.0.117 and the camera started not to work.
Hello
> Yesterday I had installed version Skype 5.5.0.114 and the camera has functioned well, I upgraded Skype version 5.5.0.117 and the camera started not to work.
This means that it is not software for laptop problem or a webcam, but maybe it s Skype related issue.
You should check if the webcam has been chosen correctly in Skype video settings.If this does not work, uninstall the 5.5.0.117 version of the system, reboot the laptop, clean the registry using CCleaner (freeware tool) and then after reboot again to install the 5.5.0.117 again if not check the 5.5.0.114 a version that worked correctly in the past.
-
Camera does not work on my Satellite C50 - B
C50 - B PSCMLA-02F00S satellite
I recently bought my C50 Satellite and that you want to use my camera and when I click the icon it tells to connect me your camera. If I go to device manager/imaging services there is no camera there.
I want a video contact in Facebook, my family and the camera does not work.
Can someone please!
Hi Alicia
Are you using the original operating system preinstalled that you got with your machine?
I assume it must be Win8.1, right?What happen when you try to use photo app?
-
Satellite L500 - Web Cam does not work
Hello.
My book built into the camera, and that camera thos not inicialize,
I have ave made a HARD drive recovery, and after the web camera software was not installed. I downloaded this software one of the device drivers and it instaled in the laptop, but the camera, but the camera does not work.
Is there a way to fix it?
Thank you.
The question is: is cam material recognized and detected by the system or not?
You can see in the Device Manager? -
My camera does not... tried all the possibilities... my OS is Windows 10. attached.pls help screen capture
HII, thanks for your response.
The problem was solved when I have the software device driver upadted.
Concerning
-
normal flash camera does not work after the update of Marshmallow to lenovo turned vibe
after update of lenovo vibe turned 6.0 when open fash normal camera does not work and I can't do it open or closed or outomatic is disable
but when open video camera flash is working and also with any another application to camera is working normally
How can fix this?
reset the camera settings after Flash open ligt
-
Z2_S327_150427_ROW - camera does not
I bout a Vibe Z2 (not pro), after three weeks all of a sudden the camera does not work, when I opened the camera, the screen goes black. What can I do to make the device work properly?
I've already reset but is still not working., I will bring to the service
Center.,.
Thank you very much.
Maybe you are looking for
-
Hello: Ive been adding a lot of new add-on during the Christmas period.now lost my favorite SHORTCUT CMD-D to add new bookmark How can I get that back?
-
Hi I was just wondering if anyone knows of a formula or a way to make the T Test in figures? Thank you very much, Ryan
-
Curve fitting non-linear with string formula
Dear members, I'm working on a curve nonlinear vi using the formula string. Installation is fairly simple (Y0 + A *(X-X0) ^ 1.5). I can provide Y0 and X 0 values for the initial settings very good (from graph), but an initial value of A, is indicativ
-
Lens style bayonet with the EOS Rebel
I have an EOS REBEL and want to use a lens of style bayonet MC AUTO ZOOM CPC PHASE 2 TDC 75-300mm MACRO 1:5.6 @55 with him. Y at - it an adapter I can use with this way to operate?
-
where can I get a copy of The Dell PC Restore by Symantec as mine is missing or damaged
where can I get a copy of The Dell PC Restore by Symantec as mine is missing or damaged, and where it goes once I