y510p 8.1 Windows black screen

Similar Questions

• New installation 8.1 Windows black screen after logo

  I met a black screen when installing Windows from a USB Pendrive 8.1 after the logo at the beginning.

  After research on internet and do not find the answer, I had a bright idea: format my hard drive (SSD), I had Windows 7 installed on it.

  1. I removed the hard drive from my laptop.
  2. I attached my drive to a USB adapter and removed the partitions on the disk with 'Create and format hard disk partitions' on another PC.
  3. Replace the hard drive in the laptop.
  4. Tried again and the installation works well!

  My laptop:

  HP DM1-4000sd

  SSD

  8 GB memory

  I hope this helps others!

  Thanks for sharing the solution which worked for you, hope this helps others

• Pavilion dv7-6c75eo: 10 start Windows (black screen for about 1 min.)

  Windows 7 (System. org) was running fast and good.

  Updated to 10 and after a few reboots, it has been installed and working.

  whenever I start cold blue windows logo appears and the device goes into screen black.

  It remains so for at least 1 minute and then the login screen appears. All the drivers are updated day/install.

  I tried to do a clean 10 x 64 Windows and installed well installation and rebooted.

  This time it was much faster (a few seconds) and I went into the Device Manager.

  I could see that Windows installed the drivers for various devices like the unknown devices disappeared one by one.

  Some time after (with 1 remaining peripheral unknown not related to the problem) it restarts.

  Now I'm on the black screen again whenever I restart.

  I hope that the description of this issue is understandable

  I've updated the hard drive on a disk of 120 GB and second disk SSD Intel with a disk of 1000 GB new

  Data sheet:

  CPU: i7 [email protected]

  RAM: 8 GB DDR 665 MHz (9-9-9-24)

  MB: HP 1803

  Graphics card: Intel HD Graphics 3000 + ATI Radeo HD 6700 M

  Storage: INTEL SSDSA2CW120G3 (SSD) + Hitachi-HGST HTS541010A9E680 (SATA)

  Audio: IDT HD Audio

  Windows Pro 64-bit 10

  Temperatures: CPU: 49-51/degr. Motherboard: 51-52/degr. storage: 32 degrees.

  I hope someone can get some ideas

  PS. : I'm not a newb

  The solution is either:
  ¤ Accept the loooooong delay
  ¤ Do not upgrade for Windows 10

• MY TOP of DELL Dimension 1100/B110 DESKTOP will not start windows black screen of death.

  I had my computer when there was a power failure in a storm, it was on a surge protector but the next day I turned on the computer, it was clicking on and then he gave me a black screen with the time system and configuration system date drive and other different things, but no screen with safe MODE or something like that. and I have no enternet, here where I live. Help me please.

  MY DELL DESK TOP Dimension 1100/B110 STARTS at THE BEGINNING, GOES THROUGH THE MAIL. SO NOT ME NOT LEFT IN THE SAFE MODE SCREEN, IF I PRESS F8, IT GOES TO ANOTHER SCREEN WHICH ME SAYS THAT MY HARD DRIVE CANNOT BE FOUND. IF YOU GO TO ANYTHING ON THIS PAGE IT TELLS YOU THE "PRIMARY MASTER" PLAYER IS... HARD DRIVE. AND THE MAIN SLAVE DRIVE IS... OFFAND STUFF LIKE THAT BUT NO SAFE MODE OR ANYTHING. MY SCREEN IS A BLACK SCREEN. AND WHEN I START THE COMPUTER THERE AS A TRIGGER FOR A BIT BEFORE I GET THE SCREEN I GET. WHAT SHOULD I DO?

  Hello

  · You have the Windows XP Setup disk?

  You can follow the steps in the below links which will help you solve the problem.

  Link: "operating system not found" or "Missing operating system" error message when you start your Windows XP-based computer: http://support.microsoft.com/kb/321626

  Computer stops responding with a black screen when you start Windows XP: http://support.microsoft.com/kb/314503

  If you do not have the disk to the operating system, then you may need to contact the manufacturer of the computer. Link: http://support.dell.com/support/index.aspx?c=us&l=en&s=gen& ~ ck = mn

• 8.1 Windows black screen at startup

  I have hp pavilion 15-e053se, which I've recently upgraded to Windows 8.1 it was working fine until I updated the bios and Intel hd graphics 4000 driver, once download is finished my laptop rebooted and since then, whenever I start it the hp logo appears and after that there is only a black screen and the cursor blinks and nothing works However I am able to boot in safe mode.
  Anyone know what to do?

  Ahsan19

  Launch "start in safe mode".

  Open Device Manager uninstall, video and WLan drivers

  or on MSCONFIG to disable video and WLAN start (shooting Service & Startup tab)

  http://h10010.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&tmp_geoLoc=true&DocName=c01853706#n66

  after normal startup install the new Bios and Chipset first after reboot the other drivers etc from this same model BIOS and drivers

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=emea_middle_east&DLC=en&sw_lang=&product=5395887#n1250

• Windows black screen after the loading screen

  OK, so when I start my computer, it loads ok until it reaches the windows loading screen then the screen goes black. I can see the good mouse but that's all. I can also spam the 'shift' key and hear the sound of the keys sticky so I consist the computer is simply not exposed. IV looked on the web and say safemode works but it doesn't. IV tried to do a Factory Reset, but I'm not 100% sure how. If nothing else there can you please help me do this. I have a HP desktop computer.

  The help is GREATLY appreciated because I really need to use my computer. Thanks :)

  Hello

  To restore your system check with support of the manufacturer of the system as they all have their own methods.
  (See InPlace upgrade / repair Installation and recovery following Options.)

  You can save your files by putting the drive in another computer or an external hard drive enclosure, then
  saving them. Do this using several methods to redundantly. Of course, a real computer
  Shop or the manufacturer of your system can help to recover the files.

  ================================================================

  Some of them may not work now however they are abandoned in just in case get you some
  access.

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista - available Installation only if you access Windows
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows black screen after update.

  Hello:

  I think that my computer had an automatic update in Tuesday night / Wednesday morning. (I heard him restart in the middle of the night). Everything seemed well Wednesday morning the computer was working and I got the video.

  I tried to start my computer last night (Thursday) and I got a black screen. No splash screen. No bios. Nothing.

  Windows starts even though, as I can hear the chime start.

  This same problem happened to me once before, about two or three months ago and I called EVGA for help. At the time, I had a spare video card, and the map screen with this card. I have currently a GTX 280 the older map was also a NVIDIA, but I don't remember the model number, possibly 7950.

  We used the sweeper driver and reinstalled the NVIDIA drivers. I was then able to get the computer to display with the 280.

  I don't have immediate access to a spare video card to try this out, so I would like to know if anyone has any suggestions on how I can solve this problem.

  I think getting a small hard drive, cheap and loading linux on it and see if I can not do load like that. I could probably run Sweeper driver on the other drive in this way as well.

  What is troubling to me, it's that I can't even in the BIOS when this happens. I don't understand why the video card isn't some "bootstrap" he can in the case of a conflict situations pilot to display the BIOS screen at least, but this isn't your problem.

   

   

  I also want to know how I can disable these automatic updates. Really don't want to mess with Windows driver configurations.

   

   

  Hello!

  Thanks for posting here to the Microsoft Answers forum.

  Drivers are optional updates and do not install unless you click on it to install it. You can disable automatic updated since the center of the action in your taskbar as a flag. But it is not recommended. Now what you can do is press f8 when your computer restarts a few options expected pop up, try to start in VGA mode or low resolution, you should be able to start windows now, with no drivers for the graphics loaded. try rolling back the drivers then or uninstall in Control Panel of-> programs. Reinstall (download from the nvidia site)

  or

  start your installation Windows dvd by inserting it and restarting your computer (set your boot options to boot from the CD/DVD in BIOS), and then use the system under repair restore

  Letus know the result.

  Microsoft-Most-Valuable-Professional, blog at: http://www.thecomputernext.com

• Windows 7 when you switch users, windows black screen

  Dear support,

  After changing the user, windows cannot display, only black.

  The mouse cannot be used too much.

  only way to fix this is stop PC, reboot again.

  Why? How can I solve it?

  Thank you very much

  Hi Gaotonaldo,

  1. You get the error as well as the black screen?
  2. The problem only occurs in this user account?

  You might face this problem due to several reasons like software conflicts, outdated video adapter etc.. I suggest you to refer to the following Microsoft article and check if it helps.

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-AU/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• Windows black screen 8.1 upgrade

  Hi people

  I upgraded to windows Windows 8.1 8 while updgrading (obtaining PC reday 60%) at this point PC sudenly turning to black screen, I have installed the latest video driver but still having this issues.

  erilier I used windows 8.1 when Norton stop working, I contacted Norton tech support team, they have updated my video driver since I don't upgarde my pc for windows 8.1 I tried almost everything as directed by the team of HP Support advised as well as Intel team support also.

  I have no problem with Windows 8 issues only with during the upgrade to windows 8.1

  My PC Config: Intel Core i7 3rd generation, Intel HD Graphics 4000, 8 GB of Ram

  PC brand: HP dv6 - 7363cl Notebook PC ENVY

  If any body can help me to fix issues will be verry useful.

  Thank you

  Hello

  Issues is resolved after response desktop Microsoft connection they sid, there is a device conflict when move us from store then I ran windows 8.1 desktop mode and I installed windows 8.1 without any problem.

  but now HP Simplepass works do not I have installed all the sensor and any driver if you have any solution for simplepass please replay me on link below

  http://h30434.www3.HP.com/T5/notebook-display-and-video/HP-simple-pass-6-0-it-s-look-like-you-are-having-some/m-p/3530001

  -Aurore

• Photoshop Save and open pop-up windows black screen

  After upgrade my mac to the latest el capitan (10.11.5), I noticed that photoshop cs5.1 acted upward. I can no longer open or save files because the pop up screen is all black. I looked in other forums and tried to change the General on Acrobat preferences that seem to help some people with their problem, but it did not help me.

  The pictures below are what looks like on the screen when you try to open a file and when you try to save a file.

  

  I am at a loss on what to do, as I do not know if there is a problem with photoshop itself, or just the update more recent el capitan.

  Thank you in advance.

  CS5 is not supported and could be a problem with the latest OS, but first of all I would like to try to reset your preferences: restore default preference files

• Satellite L300D: black screen during boot - stuck on classpnp.sys & repair

  Hi I have 3 year old Toshiba L300D.
  1 year back I upgraded vista to windows 7 Home premium.

  3 days back I had problem - my windows start page was hanged and was not forward, also all types of safe mode was stuck on classpnp.sys.

  After reading many forums, I started with USB (with windows 7) and use command prompt and all 'pcmcia' realted deleted files from drive C. Now using function F8

  I can't use any option (all the safe mode option, low resolution, restarting, etc. doesn't work, even in the Bios configuration changes will not work). Also now start my PC with USB, after the start of the windows black screen page appears with the white arrow and it will not go further this black screen so I can't even use now guest & installation option.

  Now, I don't know what to do :(
  Any help will be appreciated :)

  Hello

  The classpnp.sys seems to belong to «service Plug & Play of Windows 7»
  Connect USB devices to the laptop?
  Try to start the unit without the connected USB devices.

  In the worst case, you have to reinstall the OS using the recovery disk if F8 and all other Repair Options would not work.
  But in my view inevitable painful s

• Windows 10 boots and stuck on the black screen with high CPU

  Hello

  I have a MBP 15 "mid 2015 16G with AMD R9 M370X i7.

  I've been running bootcamp with Windows 10 installation for about a month now without any problems.  However, yesterday 10 Windows started and has been blocked in a black screen (before any screen logo or connection win) with the CPU works hard and hot.

  1. I tried to restart some time hold button / stop and start with the option key, key and then selecting the windows bootcamp partition but it drove the same black screen with CPU hot work in the background.

  2. I can always start OSX fine during this period.

  3. I tried to leave in the black screen for a good 10 minutes, but it does not change and the MBP gets really hot.

  4. I tried clearing NVRAM with Boot option + command + P + R

  5 I can't in Windows 10 safe mode using F8 or FN + F8 after you select windows to boot manager (starting with the down option).  Am I missing something here?

  I don't have a copy of Installer windows 10 with me right now unless someone can tell me how to create one under OSX.

  I searched on the internet forum and apple, but have not found a solution that works for me.  Many speak of win10 black screen with cursor showing, but my question is just a black screen with no cursor.

  Someone at - it other ideas besides reinstall Windows 10?

  You have a black screen with or without power adapter, both? If 10 Windows does not start correctly three times, it should bring up the recovery console. Windows automatic updates are enabled? You have created/activated Windows system restore points?

• When I open firefox (Note: I have firefox version 28.0 and security Karspersky 2014) I get a black screen, resembling a command prompt window, in firefox.

  Hello

  When I open firefox (Note: I have firefox version 28.0 and security Karspersky 2014) I get a black screen covering the firefox window around and it looks more lika a large window in firefox. What is it?

  Concerning

  Jean

  Huh, that's news...

  You can try Firefox in Safe Mode to see if the problem goes away. I think that it is an extension.

  • Run firefox.exe - safe-mode in the search bar in the Start Menu. (Make sure Firefox is closed)

  Have you added new extensions recently around the time this started happening? The details of your system displays the following:

  • Adobe Acrobat - create PDF 1.2 ([email protected])
  • Anti-banner 14.0.0.4917 ([email protected])
  • Dangerous sites 14.0.0.4917 blocker ([email protected])
  • Kaspersky URL Advisor 14.0.0.4917 ([email protected])
  • Troubleshooting 1. 1a ([email protected]) it comes by default, so this isn't the problem.
  • Virtual keyboard 14.0.0.4917 ([email protected])

• Firefox 18.0 black screen only on secondary screen / black box around the mouse, Windows XP, all updates

  Display after the automatic update of firefox firefox 18.0 normal if has a totally black screen (inside the border) if the window is secondary - window on the main screen. The mouse pointer (arrow) also has a box around it when firefox on the secondary screen. The display is normal if the frame partially covers the main screen.
  Environment: Lenovo 9088CTO Office 3072 usable MB installed memory
  Windows XP PRO all updates.
  ATI Radeon HD 2600 XT [graphics card]
  IBM L200P [Monitor] (20.2 "screws, s/n 66-C5539, October 2003)
  IBM L200P [Monitor] (20.2 "screws, s/n 66-G8505, April 2004)

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

• Qosmio F60 - 11 c - black screen after update of Windows 7 Directx11

  Hello
  Two days ago I've updated Directx version because I want to try call of Duty Black Ops on my laptop. I've updated normally and it works perfectly but after a day at the restart of Windows7, after Windows 7 logo, I have a black screen and cpu fan running at full speed. So I used Toshiba Recovery Center and I got my pc to make settings. When it installs the drivers crashing into the graphics driver again. After that, I installed Windows 7, but I am using my computer on the resolution of 640 x 480 with 8 colors... And I can use the security with network mode but if I install the driver for GT - 330M and restart the computer, it hangs on after restarting windows 7.
  I tried to change the options in the bios, but it's always the same problem.

  * My :* graphics card Nvidia GT330M
  * :* Bios version 2.50 / EC2.40 (last update on the Web from Toshiba site)
  * Nvidia Driver :* 260.64

  I downloaded 197.16, 197.71, 258.80 drivers Nvidia and laptopvideo2go, but when I try to install these versions, it does not compotible with my control panel.

  IM totally crushed now and I do not want my laptop to Toshiba Technical Service which is in Turkey. For an easy fix, they spent 30 days...

  You have an idea?

  Thanks in advance
  Macaws.

  Post edited by: araskalyoncu

  > I used Toshiba Recovery Center and I got my pc to make settings
  What happens then?
  Problems after installing the operating system recovery disc?

  > When it installs drivers crashing into the graphics driver
  You n t need to install all the drivers after installing the recovery disc. The recovery disk installs OS Win and also drivers needed!

  > I downloaded 197.16, 197.71, 258.80 drivers Nvidia and laptopvideo2go, but when I try to install these versions, it does not compotible with my control panel.

  If you want to install non-Toshiba drivers, you will have to do it in the Device Manager.
  You must use the Advanced installation procedure and have point to the driver files (ini files) that you have downloaded and stored on the HARD drive.
  You have simply force windows to select this driver.