Y510P lenovo BIOS problem

Similar Questions

• How to report the BIOS problem?

  Hello

  is it possible to report the BIOS problem so that a person of HP it will read and the problem will be solved if all goes well?

  To be concrete, there seems to be problem in BIOS F.02 installed on HP Mini 5103 causes of freeze if it has plugged the USB key with 'recursive partitioning' at startup. As a result, it is not possible to boot from live USB which was created from some ISO hybrids (e.g. direct ISOs of OpenSUSE recent). Since there are not many options to install the system on netbook, I think it is serious problem. My previous netbook Lenovo Ideapad S10 - 3 and also my work laptop and desktop have no problem to start with the USB stick containing "recursive partitioning", so it's certainly a problem (hopefully not feature) this concrete machine/BIOS.

  Thank you

  That's ok on the Bravo, I did nothing to help you again.  This link is for questions of security, but it is also for the firmware, so you can get away with sending them a note here:

  https://h41268.www4.HP.com/live/index.aspx?QID=11503

  - Or call them.

  http://welcome.HP.com/country/us/en/contact/phone_assist.html#section1

• LENOVO bio-excess auto sign in to everything works first, use then stops working. What can be done to fix this?

  Hello

  My problem is auto connect with Lenovo bio excess. I have Yahoo as my homepage and am usually automatically connected when I connect. Initially, I pass my finger on finger print reader, everything works fine and I am automatically loged in my various web sites, which I had already registered in the system of bio-excess. However, after a short time, the little newspaper logo does not appear on the upper left corner on my screen. There are moments where I slide my finger anyway, and the logo then appears and sign me in, but usually not.

  Hello

  I suggest you try this announcement forums finger scanner for better assistance.

  http://Forum.Lenovo.com/

• BIOS problem, how downgrade

  I'm updating the bios to 2.14 to 2.21 on my aspire E1 - 571. MY video ram on version 2.14 was 128 MB and is now on 2.21 64 MB. How downgrade bios 2.14 because 64 MB is bad for the game, when I go to install 2.14 has error message "Comparison of bios problem" Please help, help, help

  Erkedo,

  Avoid any problems flashing the BIOS to an older version. Did you do that there is no way to manually change the video memory setting in the BIOS?

• Windows XP Bios problem

  When you install Microsoft XP, I seem to be a BIOS problem.  The error message loads up once the disc loaded files, but until you're able to partition the drive.  The error message indicates that the hardware and BIOS are not ACPI compatible.  After reading upward, I tried to correct the problem by what the error message says to do.  First of all, try to update the BIOS.  I called my computer supplier and received the last update for the BIOS of the computer.  I installed it and nothing happened.  I resorted to the second option listed that would press the F7 key. that was supposed to disable the ACPI and force the installation. It does not yet.  I then read a few forums and they said to update a file on the disk XP (TXTSetup.sif).  So I did but nothing seems to happen.  You have other options to get this facility by?

  First of all, check that you have not hit one of the components of the PC especially the memory sticks. If there is anything loose, see the article published below. It might be useful for you.

  http://support.Microsoft.com/kb/307973/

• Keyboard / BIOS problem

  Keyboard / BIOS problem

  1. when I turn on my computer the active keyboard light came blink and after this the keyboard keys do not work, I'm not go to CMOS Setup by pressing on * F10 key and not saving changes pressing on * F1. And the main thing is that what window opens then work keyboard correctly.

  2. when no keyboard not work start time so how can I update or install the BIOS. Please help me.

  ·        * In the first screen show me this to save F1 and F10 for installation.

  Thank you

  Mr. Islam

  If your BIOS does not keep its settings, then it is time for a new CMOS battery.

• FPS Y510P Lenovo problem

  Hello guys, Im using Lenovo Y510P with the following specifications:

  • 4th generation Intel Core i7-4700MQ / 16 GB RAM / Full HD 1080 p 1920 x 1080/1 TB HDD + 24 GB SSD / Dual SLI NVidia GT750M 2 GB / Bluetooth / Cam

  I got this laptop from my brother, and I use it to play in Counter Strike Global Offensive (CSGO) game. I saw this laptop do about 250fps in most of the maps from CS GO, but still I get only 124fps in the cards with the settings lowest. Anyone of you guys you will suggest tips to solve this problem?

  Thanks in advance

  EDIT: Installation of the OS on the 24 GB SSD does affect performance of game somehow? My SSD has been damaged and there are currently no SSD inside. It is only the HARD drive.

  
  

• BIOS problem, Lenovo Ideapad Z500

  Hello

  My problem is that my Lenovo is infected by Trojan, so I tried to reinstall it with the original disc of Windows 7.

  Next problem is that my mechanic of dvd can not read or load the installation disc.

  I also tried boot usb but the same result shows blach screen and nothing...

  So I tried the system recovery. It says this:

  Missing Boomgr

  http://shockwave3.rajce.iDNES.cz/BIOS#20150804_125037.jpg

  and the configuration of the Bios is strange:

  http://shockwave3.rajce.iDNES.cz/BIOS#20150804_120852.jpg

  and now

  http://shockwave3.rajce.iDNES.cz/BIOS#20150804_122140.jpg

  so I don't know what to do next? Everyone will help me please. THX

  Problem is in the wrong usb flash drive. Solved

• E320 Lenovo wireless problem

  Hello, I'm reinstalling windows 7 pro 64-bit in lenovo E320 and unfortunately I can not operate the wireless, because it's a driver problem, I tried a few times to install the drivers with different configurations to change the firmware of the BIOS, but doesn't.
  Can you help please explain the steps that I have to use the wireless.
  Thanks in advance

  
  

• weird b575 lenovo wifi problem

  Hello, I have a problem with the adapter wifi since this morning... I have a lenovo b575, the system tray does not display any wireless network available, Device Manager showing an only ethernet controller wireless adapter. I checked the bios and there hows it is activated but the strange thing is when I'm in the bios, the wifi light is on, I toggle the switch wifi on and outside and light fits perfectly but when I save and exit to windows startup, it stops, then turn it back on the desktop computer it does not show help I can help please?

  Received a fairly used on ebay wireless adapter and the wireless is back on... Thanks for the help

• B50-30 Lenovo BIOS corrupted after update bios

  Well I could not enter the bios to install boot priority, tried everything I could, all, I thrust.

  And I was trying to update the bios as I thought that won't let me access it and looks like it has been corrupted.

  To get this message:

  "Default Boot Device missing or startup failed.

  Insert the recovery media and press a key

  "The Boot Manager, select choose a new boot device or to initiate a recovery media.

  But I can not find a solution how to creaqte windows 8 recovery media coz I can't access my windows 8 more.

  And I can't access bios by pressing f2 or f8 or f12 or delete!

  I found the solution here! :

  http://forums.Lenovo.com/T5/Windows-7-discussion/B50-30-problem-with-install-Windows-7/m-p/1846370/h...

  Thank you all for this amazing forum!

• X120e - Help! BIOS problems!

  Hi again,

  I'm getting some strange behaviour in the bios. One of them is that I can not activate the AMD V (TM) technology. I allow it, save the changes and reboot. The value is returned to the people with reduced mobility.

  Also, sometimes I lose some of the tabs in the bios, which is the Startup tab. I have to Load Setup Defaults to have that tab back, although I did not change in the bios.

  Another thing is that I can't get the boot of diagnosis. I always get the quick start (with the lenovo logo). Cannot enable the diagnostic startup.

  What is going on? Is the bios software buggy, or my Board is saying 'goodbye '?

  abvasili

  Hi abvasili,

  I've got your MP about your request for help for this problem of fixing on the center of services because of your first experience with them.

  Please give me the info I need in my MP replied you.

  Thank you very much!

  Kind regards
  Cleo

• Click satellite 10 - upgrding BIOS problem

  Hi all!
  I have a new toshiba satellite click on 10, but when I try to update the BIOS to 1.6 it pops up an error that says "update bios image is not valid in the current bios or flash secure does not support flash secure." What it means? How can I solve this problem?
  Thanks for your help!

  The latest version of BIOS is 5.20. You can get it on the Toshiba site:
  http://www.Toshiba.co.UK/support/BIOS/

  I'm not here on this particular error, just try to install the latest version of the BIOS and make sure you select the correct phone model when downloading (I made this mistake before!).

• Satellite Pro A210 HDD, Windows Vista & BIOS problem

  Hello

  We have an A210-1 b 3 - PSAFHE-01500PEN - running Vista which has had a hard drive failure.
  We have replaced the old drive SATA (250 GB) with a 500 GB SATA drive and used the recovery disc to install Vista and specific software from Toshiba. We intend to restore our backup data that a Vista is installed.

  That is the problem. We have installed the new hard drive, ran the recovery and after restarting, we got a Windows could not sating error set up the hardware and then restarts. I suspect that the new drive is not recognized by Vista. I looked around and it was suggested to the SATA Compatible parameter value in the BIOS. However, the BIOS (V1.5) has no options for this.

  So, can anyone suggest anything please? Any ideas where I can get the latest update of BIOS (pref one that allows me to create a boot disk and update BACK)? Any help appreciated because she has completely baffled me.

  Thank you in advance,

  Jamie

  Hello

  Seems that A210 BIOS does not support the SATA option, that would help you to switch the AHCI compatible mode. That is why the SATA drivers must be included in the configuration of OS install.

  But if you use the Toshiba drive recover then you n t need to install the SATA drivers from the Toshiba drive recover contains the image where the SATA drivers are already included.

  Now the question is why the Vista Setup program cannot complete.
  Have you used the good drive recovery for the right portable model.
  I read in a number of threads that people used bad disc

  Well, it would be interesting to know if you can install the Windows operating system using the disk from Microsoft. On the other hand, you can try to format the HARD drive before launching the recovery disk

• Satellite A350D - error meassage apear everytime I log and BIOS problem

  I have two problems here on bios and any error message please help me...

  Thank you very much.. Merry Christmas...

  Now, every time when I ' am turn my lap top before she continue to windows there is an error message always appearing.

  Intel UNDI, PXE - 2.1 (build 082)
  Copyrirgth (c) 1997-200 Intel Corporation

  For Realteak RT8101E / 8102E PCI Ethernet Controller V1.09 (080602)
  PXE - E61: Media Test translation, check the cable of

  PXE - MOF: output of the PXE Rom

  Honestly, I ' am afraid of what he will do to my computer...

  Question:
  What is the cause of the problem and how do I fixed this?

  Before I encounter this error message, but after I opened my laptop that has been started.

  Why I opened my laptop?

  I have here some information that might help trace when this problem started...
  before there is no password set in my security settings on the bios, I put the password in it. My mother borrowed my laptop so I decided to remove all the passwords that I put to him.

  In my bios security settings
  In the old password, I put my password then I leave empty the new password and retype the new password then I save and exit...

  After that I can't go to my bios it still asks to put a password but I wonder because I already deleted it, I tried to put the password that I used before but I does not work...

  I searched the internet on how to recover a bios password and I tried some of these suggestions
  I am using Toshiba Satellite A350D - 20 K I've upgraded to windows 7 64 bit, I believe that there is no utility driver for my OS password so I can not use utility password, based on a suggestion that I read

  I can reset my bios by removing the cmos / battery from inside my computer bios laptop so I decided to open my laptop but suddenly I have not found all the batteries inside...
  After I opened my laptop, that was the time I started to encounter the error message...

  Dear friend

  Now the situation is more complicated. To be honest, that certain parts of your reports are not logical for me to be discussing this.

  As you know in the BIOS boot options where you can set the boot sequence there. With other words, you can define which device should be the first, second and so on. To start notebook BIOS check this defined order and try to start the operating system. If the first boot device is not found for some second reason for notebook control device. If there is no portable bootable option check the following.

  This message PXE occurs when the laptop cannot find the boot device and try to start the LAN (network card) device. Why does this happen? I put t know what the problem is here.
  At this point, I have to say that I m really confused when you say that you can continue to windows after this message appears on the screen. How do you do that? Can you start preinstalled OS now or not?

  BIOS password
  This method with the removal of battery can run on desktop computers, but with laptops is the history a little bit different. If you are not able to remove or change the password of the BIOS, then you have a big problem. Now this can be done by only authorized service.