Yellow triangle in vCenter Server after the complete update 4.1 2

Similar Questions

• Yellow triangle with exclamation point after the transition of FCPX in motion

  Not finding what I'm doing wrong. Once I edited the 'Circle' of FCPX transition in motion, then saving them in the blue circle, but when I use it, I get this error of brand triangle yellow/exclation and the transition does not. Any ideas?

  Overdraft.

  Necessary FCPX updated to the latest version. That's all.

• I continue to see a yellow triangle with! error on the page what is - this?

  original title: yellow triangle with!  error on the page what is - this?

  It just says: error on page... it's another page of my banking and the yellow icon appears on the pay Bill, and then I can't use this page...  How is it?

  Try the steps in the article

  http://www.ehow.com/how_4922612_fix-IE-error.html

• No VRM server registered with vCenter Server for the site 'Live '.

  I have SRM 6.1 and vSphere replication 6.1 installed on both sites.

  The ECP is connected to the vCenter server.

  I get this error message: failed to create the protection group. No VRM server registered with vCenter Server for the site 'Live '.

  Screenshot attached, no one knows what is happening here?

  

  However, there was a mismatch in the meantime server on all except VRA in the remote site, it is now resolved and the issue disappeared.

  Strange, how the error related to the site online, however.

  Thank you for pointing me in the right direction.

• vCenter Server displays the error message: unable to connect to the host

  vCenter Server displays the error message: unable to connect to the host

  Symptoms

  • vCenter Server cannot connect to a host when you perform operations such as:

  •

  o Storage vMotion

  o cold migration

  o cloning a virtual machine

  o the model deployment

  • Newspapers vpxd that contains an entry similar to:

  [2009-06-04 19:27:16.326 error "App" 4444] [VpxdInvtHost] IP address change for 10.223.122.143 to 10.223.127.197 unhandled, verification of the SSL certificate is not enabled.

  • You see errors similar to:

  Unable to connect to the host o

  o [2009-06-04 19:27:09.952 'Libs' 3902384 WARNING] [NFC ERROR] NfcNewAuthdConnectionEx: unable to connect to peer (numRetries = 2). Error: Unable to connect to the host 10.223.122.143: connection timed out

  • vCenter Server shows the VMS as being disconnected then connected.

  Hello

  Resolution

  Cause

  This problem can occur if an ESX host's IP address is changed while being managed by vCenter Server.

  Check the cause

  To check the cause of the problem:

  1. Log in as root to the ESX host using a SSH client.
  1. In the file etc/opt/vmware/vpxa/vpxa.cfg, find the IP address of the host. The entry looks like:

     
     10.21.48.121
     

     Note: for more information about editing the files, see installation in VMware ESX configuration files (1017022).

  Troubleshooting

  If the IP address is incorrect, perform the following steps in order. If the operation does not resolve the problem, continue to the next step. Don't skip a step.

  1. Disconnect and then reconnect the host:
  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Reconnect the ESX host in vCenter Server.
  1. Restart the VirtualCenter agent on the ESX host:
  1. Stop the service of vpxa with the command:

     # service vmware-vpxa stop

  1. Open the /etc/opt/vmware/vpxa/vpxa.cfg file in a text editor and correct the IP address of the ESX host.
  1. Start the service of vpxa with the command:

     # service vmware-vpxa start

     Note: for VMware ESXi, you may have to restart all the management agents. For more information, see restart the agents on an ESX or ESXi Server (1003490) management .

  1. Rebuild the VirtualCenter agent on the ESX host configuration file:

     Attention: this step removes all the Statistics counters historical host and the virtual machine. If VMware ESX host is running in virtual machines that starts in a permitted CVS environment, you maybe won't be able to add the host without stopping the virtual machines first.

  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Remove the ESX host disconnected from vCenter Server.
  1. Backup the file vpxa.cfg with the command:

     # mv /etc/opt/vmware/vpxa/vpxa.cfg /etc/opt/vmware/vpxa/vpxa.oldcfg

  1. Add the ESX host disconnected to the server vCenter inventory.
  1. Run the following command to view the contents of /etc/opt/vmware/vpxa/vpxa.cfg and confirm that the host IP address is correct:

     # cat /etc/opt/vmware/vpxa/vpxa.cfg

• V5 vSphere Client VI - connectivity to vCenter Server via the non-ideal DNS configuration

  Here's a theoretical question that I fight for an answer at the bottom.   For example, the question is:
  ..
  You have a VI Client in Active Directory (AD) domain n ° 1 with its own DNS, DNS #1 System.
  You have a server vCenter and ESX hosts in AD #2 with its own system DNS, DNS #2 domain
  The vCenter server and esx in AD #2 servers have DNS entries in DNS as follows #2...
  vcenter1. DNS2.com
  Esx1.DNS2.com
  ESX2. DNS2.com
  However, in AD #1 the same servers have entered DNS DNS #1 as follows...
  vcenter1. DNS1.com
  Esx1.DNS1.com
  ESX2. DNS1.com
  The VI in AD #1 client must connect properly on the vCenter server, using the DNS #1 name vcenter1.dns1.com.   It's pretty obvious.  However, what happens when you start a console KVM remotely to one of the virtual machines on VMware ESX Server?  I don't think it'll work.  I think that the VI client is trying to communicate with the service console of the ESX Server hosting the virtual machine by using the DNS entry of the ESX Server that is known to vCenter server, IE esx1.dns2.com, which is not a FULL domain name in the DNS # 1 VI client.
  I need to review this issue for VC2.5U6 with ESX 3.5U5 and an implementation of vSphere 5, even though I think that it is the same for all versions.   Incidentally, I read KB749640, talking about DNS but I don't think it covers where the VI client is a DNS domain disparate with DNS names of the esx servers different to the one known by the VC server.
  I hope the above is clear.  Can develop if necessary
  Thank you, Jan

  ESX host name is esx1.test.com.

  In provided customer vSphre the hostname for connectivity is different. for example: esx1.prod.com, however this name is directed to the same host with intellectual property.

  To do this, we edit hosts file c:\WINDOWS\system32\drivers\etc\hosts.

• Is it possible to restore the realization of streak of moving after the recent update of watch?

  Is it possible to restore the realization "streak more long movement" after the recent update of watch (v2.2)?   I had a streak of 44 moving goes when I updated the watch (04/04/16).  After the update, although I continue to exceed my goal of moving, I no longer get the prize for the longest series of moving.  Data are always available in the watch (I can see all complete circles).

  Hello

  While it may be that for any other achievements being credited, may be useful for the future allocation of achievements to close open applications on your iPhone and then restart your iPhone and your watch:

  • To close open applications on your iPhone: click twice on the Home button, and then drag upward on each preview of the app.
  • Both devices turn off together, and then restart your iPhone first:
    • To turn off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off.
    • To reactivate: press and hold the side button until you see the Apple logo.

• How to activate IPAD 2 after the last update.

  I was not able to activate iPad 2 after the last update.   I tried to restore from Itunes and still get the same message. "the activation server is temporarily unavailable.   Connection, try your ipad to iTunes to activate it. or try again in a few minutes.

  Has anyone found a solution?    I restored via Itunes and everything done is lose my serial number. That appears is no longer...

  Support told me to send my ipad to them for a quote on the cost to repair?    It is obviously a software issue since there are so many people here have the same problem

  any suggestions?

  This problem is at the end of Apple. Wait until they fix.

  (140876)

• I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  Hello, Pichon,

  If Windows Vista application unexpected activation

  On rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or has already been activated successfully. For example, this may occur on a computer on which Windows Vista was preinstalled by an OEM installation or Volume licensing and are major hardware changes occurred, such as upgrading the hard disk and memory at the same time.

  If you are prompted to reactivate Windows Vista, you can do this by using the Windows Activation Wizard to:

  1. Click Start, and then click computer.
  2. Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area. If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  3. Select the Windows Vista activation method that you want, and then follow the instructions.

  To avoid this problem in the future, obtain the latest service pack for your version of Windows Vista, either through automatic updates or direct download.

  To update to Windows Vista and prevent this activation problem does not happen:

  1. Click Start, click all programs, and then click Windows Update.
  2. Click find updates.
  3. As soon as Windows Vista found the updates, click the install updates button.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Activation fails when you try to activate Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2 on the Internet

  http://support.Microsoft.com/kb/921471

• Invisible comments after the last update - help?

  (I moved this to its own thread because it's not exactly the same problem as one that I answered):

  2 our group Mac users comments 'invisible' since the upgrade to the latest version of Acrobat Pro DC (2015.016.20039). and Adobe Reader. You can see the comments in the comments bar, but you don't see them anywhere on the page. It will move to the point where the comment should be, but it will not show the inscriptions on the PDF file. Here is an example:

  

  The same problem occurs even after removing all preferences:

  

  Does anyone else have this problem of comments after the last update? It will sometimes show bubbles of comments, sometimes show the insertion points and shows almost never strike thru. It's weird and incoherent.

  We use a WebDAV server to store our comments, if relevant. Two of us on OS X 10.11.4.

  Hi all

  We have released a hotfix that resolves this problem on comments on zoom-in and zoom-out endangered today. If you're not already updated to the latest patch, simply open Acrobat and visit help > check for updates to apply this hotfix.

  More details about this release and bug fixes is available here: https://helpx.adobe.com/acrobat/release-note/acrobat-dc-june-02-2016.html

  Please give it a try and let us know.

  Thank you

  -ashu

• vCenter Server 4.0 and Update Manager

  Hello

  Can vCenter Server 4.0 and Update Manager be installed on the same server?

  I understand that they both must separate databeses.

  Thank you

  Euan

  Is the same as VI 3.5.

  You need two DB, but also on the same SQL instance.

  So you can install on the same computer.

  See also pages 10 and 11:

  http://www.VMware.com/PDF/vSphere4/R40/vsp_compatibility_matrix.PDF

  André

• How to remove Code condition on iwatch after the last update

  How to remove Code condition on iWatch after the last update?

  Hello

  On your iPhone, in the application of the watch, go to: My Watch (tab) > password - tap on disable password.

• After the last update of Firefox, youtube videos do not play. The answers I've found are not relevant or too complicated.

  After the last update of Firefox, youtube videos do not play. The answers I've found are not relevant or too complicated.

  Hi Cbella, YouTube is generally used with an HTML5 player, who is a player who does not use a plugin video in MP4 format (for example, it does not use the Flash plugin).

  Now, I based this assertion on Windows, Mac may vary.

  Could you do two tests for me?

  Test #1:

  To verify which player you see (which does work), try a right click or Ctrl + click on the YouTube Player and check the "context menu" that rises. If it's the Flash, there will be a menu short, referring to the Flash on the last line. If you do not see that, if you get a regular menu of Firefox, it's probably the HTML5 player.

  Are what player you?

  Test #2:

  If you open the following test page, which videos to play?

  http://www.quirksmode.org/HTML5/tests/video.html

  • The video "H.264/MP4" play?
  • The video "WebM" play?

  Thank you.

  Also, you can check if your Flash plugin is up to date? You can use the site Mozilla Plugin check for this (please ignore the other plug-ins page wants you to update at the moment avoid making the situation more complicated):

  https://www.Mozilla.org/pluginCheck/

• Java plugin for Oracle hangs after the last update

  As part of the requirement of the Oracle, we run JRE 1.7.60
  To update firefox this morning and now the plugin is constantly crashing.

  Hello

  Thanks for your reply, but I doubt that flash player is related to do with Java.

  And the Java applet crashing in my browser, I guess, should not be linked to my graphics driver, especially since the only update that took place was an update of firefox.

  In any case, Firefox for some reason any launches 2 additional tabs when executing the Java Applet (IE does not work). In the past, I'm used to close the first tab, since it contains nothing except an Oracle logo.
  However, it seems that after the last update of firefox, if this tab is closed, it cause Java to crash.

  Therefore, do not close the additional tabs by the Java Applet. However, this has never happened before, do not know what has changed in the latest version of Firefox to make it happen now?

  Thank you

• After the last update of Fire Fox, made today, to version 36.0.1, the key word. URL Hack 0.4.0 doesn't work anymore.

  After the last update of Fire Fox, made today, the 36.0.1, the "Keyword.URL Hack 0.4.0' version will stop working.
  I tried to update the url pirate, but there is no new version...

  Hi reoz, could test you with the two "features Google" keyword search Options page: I'm lucky and search by name. Perhaps one of those is the specific method you need instead of Google generic.