Yet Sync problem

Similar Questions

• Corporate e-mail Sync problem

  I had a corporate sync problem, but it was because of my corporate email Exchange Server - nothing to do with the unit of Motorola or the Android 2.2 platform.

  I found corp email sych to cause problems. Several times, it has just stopped working. Sometimes, I get the warning symbol saying that there is a problem. Other times, it just is there and can't get new messages and sends no mail in the Outbox. There is usually a snake of spinning in the corner, which suggests that he expects something to happen seems to be blocked.

  All the time that what happens, my iPad is synchronization of the same exchange server without any problems.

  Yesterday, when the phone is in mode, I turned off and he took the synchronization when I powered it upward.

  It's just one of the many issues that I have with the phone which makes it unreliable to use for business.

• 6 d flash sync problem. Flash not pertaining to the body? Firmware problem? User error?

  I was shooting my 6 d today in the Aviary. I think I was in TV mode. My Canon speedlite 320EX. I had been shooting with the flash but turned on. The shutter was set at 1/400th. ISO has been, I know, yet the value of the last room, I was, which was dark, also is at 3200 ISO.

  All the birds represented were whole animals actually; no half-birds were nowhere to be seen.

  In any case, the camera could not reduce the shutter on the camera's maximum sync speed (1/180) as you expect it to do. As a result, the flash was clearly out of sync with the shutter.

  In addition, the metadata says "flash not fire not'.»» But obviously he did fire.

  This could be a firmware issue? Bad camera? I forget some obvious user error?

  

  

  Assuming that flash & camera is 100% compatible (new models of organs aren't always happy with older strobes) AND based on the few problems that I had with my 1Ds2 & 580 EX maybe it's that the flash is not as far forward in the hot shoe as possible, or even if it is it does not connections PERFECT on all 5 terminals. I had this problem a few times & are looking for now it. If I do not get the result that I'm waiting on my test shots (to check exposure), I move & re adjust until I get the right result.

• wireless sync problems

  Hi guys, I hope one of you can help me with what I could not find anything on gogle yet.

  I am trying to set up synchronization between the z2 and my PC wireless, I had previously done this correctly then had to perform a factory reset on the phone and now its is no longer functional.

  The problem is that my pc does not appear in the field of USB connectivity in the settings, but when I try to pair I get the following message: "the pc is paired with your phone. To set up the devices again, delete pairing. »

  Although there is no place on the phone I can find to unpair. However, I see my name of the PC under the option launch and in smart connect... thougb I'm not sure wether this has nothing to do with the wireless sync, and in any case I don't see a way to remove these pairings either.

  I tried to present re - install the sony pc companion app and got the same messages again.

  Any input or help will be greatly appreciated

  OK, so finally, there is a file in the root of the internal phone storage named (laptop) that is the name of my PC. Once I moved the file to another folder and tried pairing again everything went well, and a new "LAPTOP" file has been created.

  So everything now works as it should. Thanks for your promt help Johan

• M515 Hot sync problem Windows xp pro palm1 software

  Ok. This m515 has my brothers and my first.

  Ive read through the forums trying everything proposed to get the m515 hotsync with xp.

  Windows xp pro, mem 4 concerts, 700 gigs HD space, CPU 2.1gig.

  I'm using the palm1 software and want the address book transfer.

  have hotsync manager running and I get a popup 'window hotsync', but none of the data from the Palm1 software (downloaded from the website of palm) is transferred.  Yes, the power plug and the USB is plugged.

  515 Hotsync shows long ok calendar, AddressBook etc...

  yet data will not be transferred.

  Any help apprecated. Thank you.

  AH!, it wasn't her, but he helped me to find the problem!

  There is a page of settings where it sets the sync, either IR or via cradel/modem...

  He was set to go through the Infra-red.

  I changed the setting to the cradle/modem and it Sync for the first time.

  Grand... Thank you! Had, it works...

  Message relates to: Palm m515

• FixIt DB for sync problems

  I bought the DB Fixit 'code' Thursday but did not receive the code to use yet.  When I do the "advanced use" I find 736 errors are in "SNLT calendar DB-SNLT".

  What's inside?  How can I find it and delte - or I need to wait for the DBFix this code?

  I hope that this will solve my problem of sync!

  OMG!  I think it's FINALLY fixed.  I synchronized with two computers, then adding information on both sides and synced again and everything is moving!  The only thing I lost was called MegaHolidays, a program which automatically public holidays on the calendar.  Can you recommend a different free program that perhaps does the same thing?  I'm a bit wary of download MegaHolidays once again, just in case something is wrong here and that caused all my troubles.

• Elements 8 video audio sync problems on burn

  My apologies if this is the wrong place / way to go on this issue, but maybe someone can redirect my question to the correct place, if this is not the right path to follow on that - after a lot of research, I can't find answers on other posts / comments.

  I am runing Elements 8 and have had experiences format / accidents other noted. However, I kept fighting and developed a project simply consising of DV video and standard photos (jpg) with musical sound appropriate as support (mp3).

  When I now have all produced a DVD to work, in all other aspects, as I intended, my last frustration relating to audio and video of specific clips are not synchronized. While the audit and the video appears in perfect sync when played through the timeline once the burning process is complete when played as a result out of sync (by more than a second in some cases). This out of sync can be observed when the TS file is executed in windows media player before the file is burned on a DVD (so not a problem of the burn DVD I guess).

  This would indicate that this is not the DV download process that is involved, but the burning process (I burn on a file, first). I was initially background rendering (knew I had a choice) but to burn it later did pass this off but having no significant impact. It doesn't seem to be all the clips, but a number of them (they are all from the same source).

  I'm running a pretty good system with an Intel i7, 8 GB ram and am running vista (not a strength of the system!).

  Any suggestions as to why the desynchronization appears as a result of the burning process would be welcome.

  Thanks in advance.

  Steve

  I'm not an expert on the phase of creation in the Meadow, but here's what's happening again and many other programs complete creation:

  When we had imported assets, related to Menus and all other navigation settings, they will burn (file, Image or disc). According to what has been imported, still takes the size of the selected drive and is studying the assets. If necessary, it will be to Transcode the active movement to MPEG-2 and mux the video and Audio. It will create transcode files for this purpose. These are then left in the media Cache. Once completed this transcoding, yet then assembles materials in the order of DVD-video and written the necessary files, like the VOB. These are then written to a folder wrapped in an ISO file or burned directly on the disc. According to what is done, these files will not be abandoned on the computer after the burn process. Fact.

  It's just a theory: If PrE follows very closely to this workflow, if perhaps happened by transcoding, say for a burning earlier and then make changes to the project, it could be that PrE is always trying to use these transcodes older files and that it is not picking up the changes made to the project. This can happen in still, and clean the media Cache takes care of it. Links to these previous transcode files may be messed up. Something like that could happen here - maybe not exactly the same, but similar.

  Still has a process of toolbar to clean or remove the media Cache. I don't know if the pre is similar, but do not think it does. Perhaps someone who knows what is the process of creating "under the hood", about PRE, can offer some thoughts. Steve? RTA? Anyone?

  I will also burn a small project in pre (something that I have to admit that I did only once, as I still use it) and just see what files are created and where they are created, before the physical burn.

  Thanks for your comment and happy that you got this synchronization "online!"

  Hunt

• Ipod160GB classic sync problem

  My iPod classic 160GB will not synchronize last purchases iTunes because of the iCloud required on iPod setting. Please indicate where to find this setting?

  There is no setting to iCloud associated with iPod (except iPod touch).

  Confirm that your latest iTunes Store purchases are downloaded to the local storage on your computer.  You can see that the iTunes Store in your iTunes purchases, even when they are not downloaded.  iTunes can stream items purchased from Apple (aka "iCloud") servers.  However, iTunes can't sync your iPod with songs that are only stored in iCloud. they must be stored locally.

  To check, find one of the songs recently purchased which will not sync to the iPod (in the iTunes music library).  Right click it and get the information.  On the Info window in the file tab, browse to the location.  Situation shows a path on the storage of your computer, or does it mean iCloud?  If she says iCloud, right click on the song in iTunes and download.  Or, if you see a symbol of cloud with the down arrow next to the name of the song, click on it to download the song.  Repeat for other purchases that synchronize.

  If this isn't your problem, please post back with more details about your situation.

• OSX 9.3.1 icloud notes sync problem

  Hey all.

  I'm having a problem with the timing of my notes to my iPhone 6s iCloud more (iOS 9.3.1).

  I have confirmed that the problem lies in the phone as my Macbook of synchronizations to my account iCloud without problem.

  What I tried:

  (1) hard reboot iPhone.

  (2) disable and enable synchronization of notes in the iCloud settings.

  (3) input/output panel to iCloud.

  (4) lights up "on my iPhone" notes, create a note it and move to iCloud notes.

  (5) change my password to iCloud.

  Signed 6) input/output to icloud on my macbook (which works fine).

  (7) reset my network settings according to the other discussion ( only note not synchronized new iPhone 6 more )

  8) switched on notes to my alternative email address, then created a note on Macbook (not even these notes synced to iPhone).

  Well, what I can do.

  Another that pointed out, everything else on my iPhone works perfectly.

  Other suggestions or apple is aware of this and working on a solution?

  See you soon!

  GW.

  Okay, so I managed to solve the problem and all I had to do was sync my phone to iTunes.

  That seems to have fixed.

• AT300-101 using Microsoft Exchange Sync problem

  Dear Sir or Madam,

  I use an AT300-101 (ICS 4.0.3) and try to synchronize with my hotmail account.

  Syncronising the AT300 via the Exchange account does not work correctly. It works once in two days.

  The errormessage said, that the server is currently not repsonding. Even to re-create the exchange account after removing it, does not work properly.

  As sync my hotmail account via the Exchange with the other ICS 4.0.3 android devices (HTC, Samsung, etc.) works perfectly the problem seems to be the Tablet and not the exchange server.

  Do you have any idea how to solve this problem.

  Best regards

  Schemmi

  Hello

  Have you tested this after resetting the default Android system?
  From my point of view could be a problem in exchange server as mentioned here by MS:
  http://support.Microsoft.com/kb/2563324

• Skype Sync problem, get the Notifications but not full messages! [cellular data only]

  Hey guys, I had problems with Skype on my iPhone for a long time. And this happens only when I'm NOT on WIFI.

  Whenver someone present me a message, the message will be displayed on my phone as a notification. I always get these any problem. But when I click on the notification to read it in Skype, the message does not appear. Only when I connect to WIFI, it will download messages in Skype.

  I still have my PC on 24/7, with Skype running, so all messages also delivered there.

  I had this problem on my iPhone 4, 5 and 6 now. With iOS, 7, and 8.

  Sometimes when Skype is open in the background on my phone, or when it is closed. I have always received the notifications correctly. But when I load Skype, shows nothing.

  Very frustrating when I know I have a message, but I can not just play them!

  Push notification TURNED on in App Notifications are turned on. Under notifications Skype iOS, everything is turned on. And Skype is activated as a background App application update. And I use the cell data for active Skype.

  Yet once again, this ONLY happens when I'm on a cell/3-4 connection (G) Wi - Fi I constantly receive full messages delivered in the Skype application.

  How can I fix it?

  Yes, I thought about her. It's your carier mobile which is limiting traffic to Skype on your phone.

  I'm with Vodafone. Upgrade to a more expensive plan with Vodafone fixed this problem.

• OI 9 to 12 iTunes sync problems

  Since my iPod Touch iOS Update 9, I have the following problem:

  1 synchronization via USB takes much longer than before iOS 9

  2. whenever I have sync iPod, all cover is reloaded on the iPod, even if it is already on the iPod, and no new cover art has been added.

  3. If I edited a playlist in iTunes, the old version of the playlist is renamed with a number after the name, and both versions are stored on the iPod and iTunes, until I manually remove the old version.

  The month last Apple bolloxed draw picture with one update the wrong printer driver.  Now, Apple has used an iOS update to water my iPod.  Should I just avoid all Apple software updates in the future?  It's time to finally make the jump to Linux/Android?

  Mac OS X 10.9.5

  iTunes 12.3.2.35

  iPod Touch 5 G

  iOS 9.2.1

  The following steps should solve the problems around the synchronization, assuming that all the content you want in your library.

  (If it isn't see recover your iTunes from your iPod or an iOS device)

  1. Backup device.
  2. Restoration as a new device.
  3. Restore the backup that you made earlier.

  NB. A feature introduced with iOS 9 called thinning or slicing app app allows each device to download just the code and resources required by this device, resulting in smaller downloads and a better use of the storage on the device. Therefore the device is no longer the universal version of the application that can be installed on any device to transfer applications is no longer supported. You can however download past purchases to iTunes and/or to activate Automatic app downloads buy to make sure iTunes has always the apps you want on your device. Another change to the way the restorations are implemented means that all private data app is restored and apps that are not in the library are waiting for download on the iTunes Store on Wi - Fi, in a similar way to the restoration of the iCloud way works. Not having apps in your library is not the disadvantage that it once was, but you're still at risk of losing a favored app if it is removed from the Bank and you don't have a local copy.

  TT2

• sync problems - every shot is out of Sync exactly a quarter measure worsens with each take

  Rookie X Logic Pro here - I have this problem, but not all the time, but each successive take is exactly 1/4 measure delayed the previous and out of sync with the runway, I add my track to.

  Uh, what exactly do you do?  Just save on a lot of tracks or what?

  What version of OS X and LPX?

  What audio interface / midi do you use?

• social network on bionic 5.9.902 empty names/sync problem

  I noticed that on the social network widget which accompanies the Bionic after the 5.9.902 update randomly will not show who made a post, the place name will be empty.

  My phone is the 5.9.902 with OTA and no MODs like cyanmod or such.

  I also notice that when you add youtube under the account management screen, I randomly get a youtube sync error, I get those from 5.9.901.

  well I have had this problem with blank names again and did some tests and found out that the problem is caused by one of two things.

  1. not be allowed to synchronize with the Facebook/twitter contacts.
  2-Facebook/twitter contacts are hidden in the contacts list.

  If you allow synchronize them your contacts and don't hide in your list, this issue isn't there anymore.

• Sync problem with Palm Tungsten E2 & PC - Fatal Error Message on the screen of the PDA

  Recently my Palm Tungsten E2 will not synchronize with my PC. The following message appears on the screen of my handheld Palm when it tries to sync: "Fatal Error. ' Mgr.c, Line System: 4038, error launching Application. And a "reset" icon under the message that when activated, cause my PDA to reset through the sequence of the display date/time, etc. My PC system is Windows XP Professional. I recently updated my program to sync Palm from 4.2 to 6.2, which does not fix the problem I have. Your suggestions please?

  For this type of error, you need to reset hard E2. I hope that you have all your data in Palm Desktop. After the hard reset, change the desktop hotsync conduits replaces handheld and synchronize.

  Click on the following link for the Web page of kb.hpwebos.com for the article about reset procedures

  http://KB.hpwebos.com/wps/portal/KB2/common/article/887_en.html

  You can export your data for backup purposes, first in case something happens during synchronization.

  The best way to protect your data is to export the data in each category of Palm Desktop in a separate folder on your PC.

  Create a new folder on your PC somewhere that suits. Name it something like Palm Desktop data. Click on the link below and follow the instructions on this page for the export procedure.

  http://KB.hpwebos.com/wps/portal/KB2/common/article/28734_en.html
  Make sure you only select everything for the beach in the export window.

  With the data stored in the created folder, make a copy of this file and save it on a USB key, cd - rw or external hard drive.

  Whenever you change in Palm Desktop, export the data that has been changed in this file and save again to external media.

  With this process you can always import the data in Palm Desktop, whenever you have a problem with the data in Palm Desktop, or if your computer/hard drive/device crash.

  For reference purposes, click the following link to the support page for your device on the kb.hpwebos.com Web page.

  http://KB.hpwebos.com/wps/portal/KB/na/Tungsten/E2/unlocked/home/page_en.html

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.