"You don't have the appropriate permissions to perform this action. For more information contact your system administrator. »

Similar Questions

• Disabled user account control, when try to turn on the States of error message "you don't have the appropriate permissions to perform this action.

  Disabled user account control, when try to turn on the States of error message "you don't have the appropriate permissions to perform this action.

  What type of account selected for this account you upward?

  And your administrator account is now or not?

  go in Start > Control Panel > user accounts see what is written under your username.

• In MS Outlook, I get the error "You don't have the appropriate permissions to perform this operation."

  This happens when I check for mail or try to send an e-mail.

  Hello

  What version of Microsoft Outlook is installed on your computer?

  Try the procedure described in the article below and check.
  http://support.Microsoft.com/kb/961752

  If the problem persists I would ask you to post your question on the dedicated forums of Microsoft Outlook.
  Here is the link:
  http://answers.Microsoft.com/en-us/Office/Forum/Outlook

  I hope this helps.

• When you run the Microsoft Security essentails I get the message "the program is blocked by group policy. For more information, contact your system administrator. »

  When you run the Microsoft Security essentails I get the message "the program is blocked by group policy. For more information, contact your system administrator. »

  Original title: microsoft security essentails

  Hi Kim,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I appreciate if you could help me with more information.

  1. when exactly you receive this error message?

  2. are you on a computer in the domain?

  3 is the Microsoft Security Essentials-specific issue?

  The error messages say about group policy which is the collection of settings that define the appearance of a system and how it behaves for a defined group of users. Microsoft provides a program with a console (Group Policy Microsoft Management Console). The console allows programmers select a GPO that is linked to the directory of centers for domains, organizational units or sites. GPO provides the programmer with security options, the software installation and maintenance options, scripting options and the folder redirection options.

  Response with more information to help you.

• Download a update, I get this message,"you don't have the appropriate permissions. Choose another directory for registration. How to choose another directory for registration?

  Trying to update from Mozilla, I get the error message following, "the file would be not saved because you do not have the appropriate permissions. Choose another directory for registration.

  How to choose another "directory" of record?

  Press Alt + E and then N to bring up your preferences. On the general tab, check the option "always ask me where to save files.

• When you try to scan security under XP, make an error 'Windows cannot access the specified device path or file, you don't have the appropriate permissions to access this item'

  do not run a scan of security that this message

  Hello

  1 security are. what scan you referring?
  2. do you get this error when you try to run another program on your computer?
  3. do you have connected to the computer as an administrator?

  Follow the steps in this article and check if it makes a difference.

  
  How to reset security settings to default values
  http://support.Microsoft.com/kb/313222#appliesTo

  I hope that helps!

• Cannot open programs and files error: windows cannot access the file or the path of the specified unit. you don't have the appropriate permissions to access the item

  Original title: Search programs and files will not let me

  I get no response from the search - when I hit to see more results I request = aa indicating that windows cannot access the file or the path of the specified unit.  you don't have the appropriate permissions to access the item

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2 when was the last time it was working fine?

  3 are you facing this problem only with Web sites or other sites also?

  I suggest you try the steps below and check if it helps

  Step 1:
  Try to start the computer in safe mode with network and check if the same error message, here is the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2:
  However, to work around the problem, try the step below:

  a. right click on the program file, select Properties.

  b. on the general tab, at the bottom, you will see listed in the issue of safety: this file came from another computer and might be blocked to help protect this computer.

  c. unlock.

  d. click on apply.
  e. click OK.

  Hope this information is useful.

• Windows Photo Viewer cannot open this picture because you don't have the appropriate permissions to access the location of the file. »

  Separated from this thread.

  I have the same problem when I try to access some of my photos through any method (File Explorer, IE, Windows Photo Viewer, etc.).  When I try to display the image, I get an error message that says "Windows Photo Viewer cannot open this picture because you don't have the appropriate permissions to access the location of the file."  A few photos in the folder open very well.

  The photos are stored on the hard drive of PC in the pictures folder.  Not all pictures are affected - some I can always access.  I tried to run your AutoCorrect tool - it has not fixed the problem.  I tried to add "everyone" by your above statement and he could not solve the problem.  While it was updating the permissions for everyone, it displays the following error message: "unable to enumerate the objects in the container.  Access is denied. »

  Hi Bruce,.

  You might face this problem when you have not signed up your computer as an administrator user. Please write us with the following details.

  You did changes to photo viewer settings prior to this problem?

  I suggest that you follow the steps in the link below by Babu V dated August 21, 2013 and check if this may help you.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-files/window-Photo-Viewer-cant-open-this-picture-because/05e31f84-75ab-4772-84a5-5ce0e6e71f61

  Let us know the status of the issue.

• Windows cannot access the specified device, the path of the file. You don't have the appropriate permissions to access the item

  Original title:
  I am signed in as an administrator, but cannot install software that I uninstalled it before. The following message has prompted
  "Windows cannot access the specified device, the path of the file. You can not have the appropriate permissions to access the item.
  Can someone help me with this? Thank you.

  Hi Arya S Asok,.
  It seems that the anti-virus program has blocked the process. I have temporary disable the anti-virus and installing simply not work its way! Thank you for your help.

  :-)

• Windows can not access the device, the path, or the specified file. you don't have the appropriate permissions to access the item

  Hello

  Can someone tell me how to rule this problem. Windows cannot access the device, to the path or specified file. you peut not have the appropriate permissions for access to item

  You must provide DETAILS... version of Windows and what program do you use?

  Do run as Administrator http://forums.adobe.com/thread/969395 [says again and also to Adobe all emissions] will sometimes fix errors "weird" or "authorization".

  IF a former program and Windows 10

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

• Cannot display pictures using Windows, error Photo Viewer: cannot open this picture because you don't have the appropriate permissions to access the location of the file.

  Original title: ASK the VIEWER of PHOTOS WINDOWS WINDOWS 7

  WHEN I OPEN MY IMAGE (PHOTO) COLLECTION IN WINOWS PHOTO AT SUNDAY VIEWER BUT IT WINDOWS PICTUREMESSAGE cannot OPEN THIS PICTURE BECAUSE YOU HAVE not the PERMISSION APPROPRIATE TO the ACCESS of the LOCATION of THE FILE, I CHECK NO VIRUSES, NO PROBLEM to OTHERS AND SAID THAT SATURDAY, I OPENED TIME OPEN THE PICTURES, BUT AFTER ONE DAY WHAT PROBLEM ANY DEFINITION of PROBLEM OR OTHER PLEASE HELP ME AS AMODERNE, IF YOUR NEED A FURTHER INVESTIGATION OF MY SYSTEM SAYS I SEND YOU AS BURT SOLVE THIS PROBLEM

  Hi JULIE,.

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are not able to view pictures using Windows Photo Viewer. Please correct me if I misunderstood.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1 did you change on your computer before the show?

  2 are you able to open the file using paint?

  Please follow the steps mentioned below:

  Method 1:

  Step 1: Perform safe mode

  Safe mode, start Windows in a limited State, where only the essential is started. If a problem does reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as causes possible

  Start your computer in safe mode with networking

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: Perform the clean boot

  A clean boot helps eliminate software conflicts. The article below describes how to solve problems in Windows 7 by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual. To configure your computer to clean boot see the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.

  Method 2:

  System Restore can return programs and system files from your PC to a time when everything was working well.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Note: If you have installed an application after the date to which you are restoring, you will need to reinstall these applications

  Please complete all of the recommended steps and if after following the steps to issue still persists, please come back to us and we will be happy to provide you with additional options available that you can use to get this problem is solved.

  If you are unable to perform the steps mentioned above, I recommend you to contact our live support by clicking on the link http://support.microsoft.com/common/international.aspx?RDPATH=dm;en-us;selectassist&target=assistance

• Windows cannot access the specified device, path or file. You don't have the appropriate permissions to access the item

  After you rename my PC, I don't have access to my files or applications. I tried to give myself access via computer/properties/security but I'm not allow to access this no more, and I don't have access to the user account... Can anyone help?

  I tried to run the command prompt, but it does not run "cmd"!

  I was able to run the Windows in safe mode system restore, I go back to my computer. Thanks for your help.

• Get C:\windows\system32\rundll32.exe cannot access the specified device, path or file. You don't have the appropriate permissions to access the item

  Arises when I try to change the mouse settings and many other shortcuts. Can not load the task bar elements IE. McAfee spybot start in the bar at the bottom right of the

  You might have a virus, go here and do a scan is a free service from Microsoft.

  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  After the scan, if everything is ok and your system tray icons are still not all there after return.

• Please help for the love of God-windows photo viewer can't open this photo because you don't have the appropriate permissions to access the location of the file

  Hello

  I had some files in my recent windows 7 the name of the color of my files and folders become green but I didn't know what happens later.
  After awhile, I changed my windows and I install the same windows 7 86 x just like before.
  I can't open these files that retain the names of Greens.
  These files are almost JPEG and PSD(Photo shop).
  I can't copy, cut. name change. delete, then open them with any computer, such as windows photo viewer software, photo shop, see ACD and other software.
  I surfed on the Internet and someone said that there is a software which is $ 26 but there is no guarantee that it works and files could not be opened.
  someone said your question to help Microsoft because they are the only one who have the codec for this file.
  Perhaps because the user or changed windows shows this error code.
  If anyone can help, please solution.
  Thank you very much.
  E-mail address is removed from the privacy *.

  Install this...

  http://www.howtogeek.com/HOWTO/Windows-Vista/add-take-ownership-to-Explorer-right-click-menu-in-Vista/

  It will help to get ownership of the files and is useful when you are trying to access an old user account...

• Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  Hello

  I recently changed to use AVG free Antivirus Vista 2010 edition and since then (next day) seems to be locked out almost everything on the computer other then IE.  Open any kind of .exe translates into "Windows cannot access the specified device, path or file. You don't have the appropriate permissions to access the item. "I can access the Control Panel, but when I try to run something (a user restore Sys account) nothing happens or I get the same error.  I can not even access/cmd?

  Operating system is vista 64 bit home premium
  Computer has 1 which is defined as administrator SP1
  Tried to do a restore of the system in normal mode and safe, the two will not start.

  I have a feeling I know what the problem is, that when you look at the properties > Security "Progam files" in the 5 groupnames user administrator has not enabled in the lower area of permissions?  Guess a virus has locked all accounts to use the machine key files? (When editing and allowing the admin to have full control etc. in written authorization, I get an "access denied" Message.)  Be honest this really problems out of my PC knowledge, I would usually just reformat if I hit I can't solve a problem, but this time reformating is not the best option.

  Thanks in advance for any help, I would really appreciate it, it left me speechless!

  PS. read through the similar questions and have used the "fix windows' programs, with nothing working or me being not able to access something used.

  Hi Dany88,

  First of all, I would say that you uninstall security antivirus vista 2010 of computer software, since there are several questions on the computer after installing. This software may have created conflicts between other programs on the computer.

  As you face problems to access items from 'Control panel', I would say you visit the security software vendor's Web site and search a tool of suppression using which you can uninstall the software.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  If questions are set after uninstalling security software, I suggest that you change the security antivirus vista to some else software or contact the vendor of the software for more information.

  I would also say that you are investigating the computer by using the methods mentioned in the link below.
   
  How to get rid of malware or viruses
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  See the link below to find out how to start in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.