You format it to reinstall Windows Vista?

Hello! I discovered that my Vista laptop must have resettled windows as there was some curruption of some of the features - DVD player and USB connections.
Help! Thank you Cathie

How Vista is installed depends on what recovery process you are using.

The manufacturer's recovery process has everything built into it.

If you use a Vista DVD, you can format during the installation process.

Read the info below:

How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

There is no Vista free download legal available.

Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

Normally, they do this for a cost of $ small.

In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

Normally, you have to press F10 or F11 at startup to start the recovery process...

Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

They will tell you how to do this.

Every computer manufacturer has their own way of making recovery disk/s.

Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.

There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

http://support.Microsoft.com/default.aspx/KB/918884

MS advice on the conduct of clean install.

http://www.theeldergeekvista.com/vista_clean_installation.htm

A tutorial on the use of a clean install

http://www.winsupersite.com/showcase/winvista_install_03.asp

Super Guide Windows Vista Installation

After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

Save all data, because it will be lost during a clean installation.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it.

    * Original title: reinstalling Windows Vista

    I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it. I restarted my computer, press the F12 key and selected boot from cd/dvd, but the computer still started in windows. My computer is Dell. If there is no solution, it is possible to reinstall windows without using the disc?

    Hello

    Here are the options of relocation:

    How ro reinstall from the Dell recovery partition:

    http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

    Reinstalling the printer Dell supplied disk:

    http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

    ______________________________________________

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • I formatted my PC with windows vista and reinstalled but now it shows the wrong key. I use my purchased copy of the software in 2009

    original title: ACTIVATION of VISTA
    I formatted my PC with windows vista and reinstalled but now it shows the wrong key. I use my purchased copy of the software in 2009.

    You simply have to use telephone Activation...

    activation by telephone (call of the operator)
    Click the Start button
    in the search box, type
    SLUI 4
    and press the Enter key
    Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you
  • When you do the automatic updates of Windows Vista I get the "Security Update for Windows Media Format Runtime 11 for Windows Vista (KB968816)" = Failed__

    When you do the automatic updates of Windows Vista, I get the code below.

    'A security update for Windows Media Format Runtime 11 for Windows Vista (KB968816)' = failure

    • What should I do to fix this?
    • And what does this update actually?

    Thanks for any help provided.

    scrubie,
    If you go to programs and features, and then on the left side you should see a link for "Daily display installed."  Which would then show the list of updates with the State which will show you if it failed or not.

    Hope that helps. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • What should I do if I accidentally reinstalled windows vista when you try just to update?

    Help! I had trouble to receive updates of service package and so I put my windows boot drive and I just wanted to update, but I miss somehow understood and reinstalled windows vista. I have nothing now. Have I lost all my documents, photo, music and software?

    Hello

    a clean install wipes the hard drive clean of everything

    You cannot undo what you've done

    If you have lost data, you can try this

    http://www.Piriform.com/Recuva

    Read also:

    Since we don't know exactly how you reinstalled it seek a windows.old folder

    How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

    http://support.Microsoft.com/kb/932912

    or even return to a previous operating system by using the information in file window.old at the link below

    http://support.Microsoft.com/kb/933168

    If the above does not work:

    Try the data recovery experts

    but they are very expensive

  • Recovery of Outlook Contacts after you have reinstalled Windows Vista

    I had to reinstall Windows Vista for a variety of reasons.  I use Windows Backup and Restore Center to back up all personal files, send an email and contacts to an external hard drive.  For some reason, I can't find or recover the e-mail contacts that I had saved before reinstalling.  Y at - there a trick to this?  They were also not in the Windows.old file that I could tell.  Help, please. Thank you.

    Robert

    Well I thought about it.  I had to physically locate the .pst file in about 2 weeks on the external hard drive.  I copied and pasted in my user profile.  Then he imported in Outlook.  All emails and contacts restored.  I knew there was a way to do it.

  • I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

    I reinstalled windows vista, and when I did I must have erased the initial password when you turn on the computer. I was wondering how can I configure the windows logon password?

    http://pcsupport.about.com/od/windowsvista/HT/nvistapassword.htm

    Info on the link above will help you.

    http://au.Dummies.com/how-to/content/set-up-passwords-in-Windows-Vista.html

    More info on including a password reset disc info.

    See you soon. Mick Murphy - Microsoft partner

  • You need to reinstall Windows Vista and later upgrade to Windows 8 again. But is not Vista disc.

    Original title: windows disk

    I have a Sony Vaio all in one computer. It came with windows vista. I have recently upgraded to windows 8. I need the windows vista disc. I want the disc because I would like to reinstall vista yet but you may have to reinstall windows 8 thereafter.

    How would the windows vista and windows disk or 8 with purchase of a new version?

    See the following topics:

    http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/repair-man-removed-windows-vista-and-installed/f4ec610a-856b-47a6-9ac2-7d5f07763eb0?msgId=343a6389-3a13-46d1-93fa-342f6a9b8ae1

  • Reinstall Windows Vista with the CD

    I have the Virus that replaces my system 32 (Windows Vista file)... So, I want to reinstall Windows Vista... After that I reinstalled it, my data such as music, video, project will be lost? Viruses replace the windows explore, Windows Update (I can't update more), Windows Movie Maker, Windows Media Player and more... My computer is slow and being unresponsive is not all this time...

    Hi Nik

    Thank you for giving us the opportunity to help you with this problem.

    According to the description of the problem, the Windows Vista 32 system file has been replaced. You want to reinstall Windows Vista.

    Write to us with the following information.

    (1) what makes say you that your System 32 file has been replaced?
    (2) do you have any third-party antivirus or security software installed on your computer?

    (3) have tried to remove the virus?

    I want to suggest to follow the troubleshooting methods listed here.

    Run Microsoft Safety scanner.

    I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Important: during the analysis of the disk hard if bad sectors are found, the parser attempts to repair this area, all available on which data may be lost.

    If you perform a clean formatting, you will lose your data and files. If you want to keep your files and data that you do a Custome of Installation of Windows Vista.

    Method 1:

    Ignore the title and try the steps mentioned in this article.

     
    Method 2.
     
    Difficulty of Windows system performance slow computer problems
     
    If you're still having problems, you can check out the following link and try the steps.

    How to resolve performance issues during startup in Windows Vista

    http://support.Microsoft.com/kb/950684

     

    Please email us with the information asked so that we can help you.

  • I can't reinstall windows Vista Home Basic Edition to my Compaq presario laptop

    Hello
    I want to format my 'C' drive and reinstall windows Vista Home Basic Edition for my 'compaq presario laptop.
    When I lived with my recovery disk, it has been fine until "loading windows files" and taking me to the recovery / restore point but not with the format options (GUI).

    Hello

    With this HP Compaq recovery process, it's a different process than the installation with the Microsoft DVD

    There is a section slightly more than 1/2 at the bottom of this link from HP showing you how to reinstall Vista using their recovery disks.

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703#RestoreWithDiscs

    If you have any questions or problems with it, contact HP as it's the HP recovery process.

    Contact HP:

    http://h20566.www2.HP.com/portal/site/hpsc/public/help/contactHP/home/?AC.admitted=1336217096189.876444892.199480143

    Or try the HP's Support Forums:

    http://h30434.www3.HP.com/

    See you soon.

  • How can I reinstall Windows Vista?

    I have a Toshiba laptop with Vista installed ready recently, but what happens if, at some point in the future, I need to reformat?
    How can I reinstall Vista without a disk?

    Thank you.

    I think that you have not looked in the user manual. This, because there you can find a lot of information how do I reinstall Windows Vista.

    However, the computer Toshiba laptop with Vista have a HARD drive recovery function. On the second partition is a file called "HDDRecovery". It contains the image of the factory settings, and so you can reinstall the laptop without CD/DVD.

    In addition, you can also burn the recovery disks with the Toshiba recovery disc creator and you should do it too. If a faulty HARD drive or something else you need this floppy and otherwise, you must pay for it.

    Normally, you should get the message of reminder of recovery on your laptop and it contains interesting information:

    + Important INFORMATION +.

    + your system is equipped with a hard drive recovery system. If you need repair.
    + your computer in the restaurant to original factory State, you can do it directly.
    + HDD (press F8 when you start your computer, choose "Repair your computer" +)
    + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

    + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
    + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
    + Gets severely damaged.

  • Re: How to reinstall windows vista on my Satellite L300

    I need to reinstall windows vista on my Satellite L300 because of a problem, I had with it (the computer does not start and the recovery option does not work). It has not come with a windows CD so how can I reinstall it?
    Do I have to get a CD by myself and if so - what version of windows vista is compatible with my laptop?
    (I can not contact the provider because I is not guaranteed).

    > It came not with a windows CD so how can I reinstall it?
    You had an option pre-installed on your laptop that you helped to create the recovery disk. Seems you didn't create this disk in the past

    Well, in this case, you can order the CD here:
    http://backupmedia.Toshiba.EU/landing.aspx

    Welcome them

  • Reinstalling Windows Vista on satellite A210

    Equium A210 my son entered a "+ State +"-viruses, Trojans, Malware, etc.

    He tried to clean it up using various tools including Spybot S & D, AdAware, Malwarebytes, SUPERAntiSpyware, AVG & Avira AntiVir and now asked me how to reinstall Windows Vista initial.

    The laptop came with Windows installation disc, but there is a 1.46 GB partition called "EISA Configuration" - it's my solution and if so, how to use it?

    Any help much appreciated.

    This partition is only a function of Vista and has nothing to do with the recovery image to be used for any new OS install.
    Can you please publish the exact laptop model name and model number?

  • Reinstall Windows Vista Edition Home Premium

    I have a HP Pavilion dv6000 with Windows Vista Home Premium.  This laptop has his OS damaged somehow, of great utility and inefficient clean ups.  After that failure with another attmpted fixed, I plan to reinstall Windows.  I have the original restore disks (recovery CD HP QuickPlay application (c) 2005 and the small Manual HP QuickPlay April 2005.  In this manual, it is said: If you plan to reinstall your operating system, first read... Relocation of QuickPlay... [and]... Installation of QuickPlay will stop if you try and install io QuickPlay on a laptop not supported.

    That means not supported (1) with expired warranty?  This means... (2) a different from this particular dv6000 laptop?  (3)... something else?

    If not taken into (1) average load with an expired warranty, and what options are there to reinstall Windows Vista Home Premium on this computer?

    Neither QuickPlay application restore CD or Application and Driver Recovery DVD are the disks necessary to reinstall Vista. Do you have another drive?

    Alternatively, you can try to tap the F11 key immediately after switching on the laptop to try to boot in Recovery to make a factory reset.

    See the section "start a restore from the hard drive & the computer is off:

    http://support.HP.com/us-en/document/c00809678

  • Activation of reinstalled Windows Vista - the product key already in use message

    My system crashed - continueously runs blue and the cause was the motherboard. Replaced the motherboard and making it to level the motherboard and processor. The new motherboard and processor are compatible with Windows Vista. After you have reinstalled Windows Vista activation using the internet's message that the product key is already in use. What should do?

    If and only if you have a Vista "commercial" version, then you can try the phone activation.

    How to activate Windows 7 or Vista manually (activate by phone)
    http://support.Microsoft.com/kb/950929/en-us

    1) click Start and in the search for box type: slui.exe 4
    (2) press the ENTER"" key.
    (3) select your "country" in the list.
    (4) choose the option "activate phone".
    (5) stay on the phone * do not select/press any option * and wait for a person to help you.
    (6) explain your problem clearly to the support person.
    (7) the person must give you a confirmation ID, copy it down on paper,
    (8) check that the ID is correct in reading the support person.
    (9) to enter the ID number, then click 'Next' to complete the activation process.

    Activation and registration of a Microsoft product
    http://support.Microsoft.com/?kbid=326851
    Windows activation: (888) 571-2048
    (888) 725-1047 or 800-936-5700

    -Product key of letters and numbers-

    Not confused the letter B with the number 8, the letter Q with the letter O.
    the letter G and the number 6.

    A, E, I, O and u are not used.

    ----------------------------  Alternatives -------------------------------------

    To enable the use of the phone

    1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
    then by clicking on activate Windows now. ?

    2. click on show me other ways to activate.

    3 type your Windows 7 product key, and then click Next.

    4. click on use the automated telephone and then click Next.
    If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    5. click on the location nearest you from the drop-down list, and then click Next.

    6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

    7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

    8 Note the confirmation ID the phone system gives you.

    9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

    10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

    How to contact a Microsoft Product Activation Center by phone
    http://support.Microsoft.com/kb/950929

    Microsoft Activation centers worldwide telephone numbers:
    http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
    (This site is for activating Volume License, but if you call, they will help you)

    The phone number is not working:
    Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

    Register Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/help/register
    Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
    filled with tips, creative tips and other information to you help get the most out of Windows 7.
    You also get a subscription to the monthly newsletter of Windows Explorer,
    where you will find other tips and tricks, as well as special offers.

    Learn about Activation:
    http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

    J W Stuart: http://www.pagestart.com

Maybe you are looking for