2610xi All in One: problem installing HP 2610xi

Similar Questions

• HP Deskjet 3070 (All-in-one/Wireless) install problem Win 7 64

  Hello world

  I wonder if others have had similar problems or ideas on the underside, surely I can't be the only one to use this installation/suffering with this problem.

  Printers: HP Deskjet 3070 All in One (USB/Wifi)

  Operating systems: Windows 7 64-bit (installed absolutely fine on Win 7 32 bit laptop computer connected via wifi).

  Setup: - a Homehub BT, providing WiFi for laptop (Win7 32 bit), a desktop computer (WinXP SP3), the printer has an IP address, which is visible on the home network map - it has a MAC address also. My PC: connected by Ethernet to the homehub which is currently running wifi for all of the foregoing.

  Drivers using downloaded: -.

  + Computer laptop Win 7 32 bits connected via WiFi to the Homehub - installed fine, found printer - this is the stage where the printer receives a configuration intial IP address / completed.

  + WinXP SP3 connected through WiFi to Homhub - as above, correct, opportunity driver found the printer (which, at this time already, there).

  If the printer exists within the network, other computers can see / use it.

  ++ My PC: Win 7 64 bit connected by ETHERNET to Homehub (she does not and will not have a wireless option).

  Downloaded the drivers to install HP. (later tried "Run as Administrator"), select the software components (i.e. Remove feedback/coupons etc), installs OK applications, next step is the configuration of the printer. Add a new printer. "Check network" window appears with the message "Checking network environment" bar and the State. The status bar springs upward but stops dead at the filled Stadium. No possibility to choose whatever it, pressing Cancel has no effect. End of task here generates an error of 'work '. 'devicesetup.exe' stopped The installer never ends, applications are installed, but at no time, it shows the printer/selection.

  I tried many things: complete uninstall "engines", which in this case seem to be the only applications, ensure that all non-essential startup items are disabled, make sure that the firewall is DISABLED (just to be sure), ensure that the anti-virus is disabled there is, in fact, no other printer installed (this computer never had a printer attached to it) make sure file sharing and printing are powered, ensure that there is no TCP/IP/ports printers mapped etc... Still the same error, old or new drivers, always the same - installation does not complete.

  All the doctor diagnostic tools/printing tell me I have to install the driver software (I agree) but direct me to the HP site to download the ones I already have.

  I can't enter the Server Web integrated (the PC where I can't install the drivers, or one of the 2 PC's who have installed correctly). One of them if I click on networking or wireless or advanced it warns a HTTPS connection and then fails with "internal server error".

  My questions to someone kind enough to read this wall of text: -.

  + Anyone has any ideas please? I would prefer not to return the printer as defective because it seems to be a good all-rounder and it works for 2 other PCs in the House, its just mine which does not connect! Sad...

  I'll try the USB installation and then removing the USB-> wireless to see if that can help. I had previously seen articles where people offer to buy a router to 3rd party like that is basically a wifi pass through broadcaster. It is not for me thanks

  Thank you all for reading at least, it's now corrected with slightly reduced functionality.

  Install the USB printer, then DO NOT convert into wireless via HP drivers/installation.

  Change the USB to a TCP/IP port port newly created under the control panel of the printer (windows 7), enter the IP manually to the printer - you want an IP address that will change not in order to make this work - forcing the Home Hub to never provide that the same IP unique to this particular device was the easiest way for me. This connected but showed as offline printer constantly, others may have different experiences.

  To fix that (for me): -.

  Installing the printer in Control Panel Goto, force reinstall drivers HP ("via the drive"). Make sure that all the old files are overwritten. Turn the printer and then turn on (power button - twice if in mode "standby" to disable). Wait until the wireless light will stop flashing and become solid blue. Check in Control Panel if the status is online, if so you are good to go

  As a result of this sabotage, you lose the feature advanced scan for PC etc etc, but the real impression seems to be absolutely perfect. The printer is always available to everyone on the network, etc.

  Good luck to all.

  Alex

• HP Photosmart all-in-one C309a: need help Urgent! -HP Photosmart all-in-one problem C309a Incompatible cartridge - 564 and 862

  Hello everyone.

  I am a happy user of HP Photosmart all-in-one printer and for many years never had a problem.  I always bought new 862 cartridges and it worked fine.  Recently, a friend brought me to Singapore two new series of cartridges, but the owner of the store said this is the new higher capacity cartridges.  I said why not?  Even better, in fact since the printer is a guzzler of ink!

  This is, because I tried to install these new cartridges, I always get the message "Incompatible cartridge" after what, I can't not access the printer.

  Can someone help me solve this problem?  The cartridges are exactly the same, so I suspect its something to do with the chip?  I tried all possible methods such as the re-installation of the cartridges, remove the carriage and re-setup, cleaning the cartridge chip, etc.

  Since I'm brought this printer back from China to Europe, I really need to solve this problem otherwise I'm stuck without a printer.  These cartridges are not available locally.

  I would be grateful any advice!  Thank you.

  Your printer can use cartridges of 864. Unless you call HP and have them reset the printer to your new country, you live. Only then these cartridges can be used if you can find them on the spot. Call HP.

• HP OfficeJet 3830 all-in-one: problem of driver HP OfficeJet 3830

  Very recently, I installed the 3830 OfficeJet from HP printer all in one so that the documents can be printed from an iPad and also my desktop computer wireless.

  Installation seems fine - however there scanning questions and when I ran the doctor of printing & scanning HP the fix seemed to correct the problem.  I had to run the Scan Doctor again for the same problem - so there is of course another issue here.  Now, Dr. Printing & scanning says that the product could not be found even after a reboot, and the recommendation was to contact HP support.

  As I am much a technophobe I don't really know what is happening here and how to correct the situation.  Can someone please tell me - in the simplest language possible - how this problem can be treated.

  Thank you very much.

  Dottylass

  Hello

  Please uninstall and reinstall the software COMPLETE features, follow these steps:

  1. download and save the software COMPLETE features (do not install online)

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-3830-all-in-one-printer-series/7172321/model/7172322#Z7_3054ICK0K8UDA0AQC11TA930C7

  2 uninstall the software from your computer
  3. install the FULL feature software "saved".

  Hope that helps!

• Download all-in-one problems driver HP psc 1350

  Hello

  I have a Toshiba laptop and a printer all-in-one hp psc 1350.  Both worked fine until Sunday.  Now the printer will not work.

  The light on the printer is constantly on when it is attached to the power, I can press the button, so it doesn't seem to be broken, but the light does not turn off.

  When I remove the power cord, the lights to scroll the Panel of the printer (and the button light goes off momentarily) then the light on stays on and will not turn off.

  I did not download the updated driver from Windows Update or all Web sites automatically or manually - TOSHIBA USB DVB-T/analog hybrid Tuner (391 KB).  Still, the download fails. I also tried installing Microsoft FixIt, but he tells me that he has no problem.

  Does this mean that the driver is the issue, or do I have to buy a new printer?

  Thanks for your help.

  Hi Gerri_31,

  I understand that you are not able to stop the printer with the power button.

  Thank you for your response.
  I'll be happy to help you with this.

  I'd do a power reset to see if that will solve the problem. When the printer is still lit, disconnect the power cable from the back of the printer, press and hold power for 10 seconds to drain any power, if the printer has external power supply with a detachable power cord unplug for 15 seconds and reconnect it. Then, disconnect the power cable from the wall outlet. Wait 10 seconds and reconnect the power cable to the wall outlet first, then the back of the printer and turn on again.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  I have provided a document for power issues.

  The HP printer power on not or answer.

  If these steps do not resolve the problem, so that I would recommend to call the HP Technical Support
  more help to see what other options are available to you or to know the
  trade and commerce to the top of the program.

  Contact HP worldwide.

  I hope this helps.
  Thanks for posting on the HP Forums. Have a great day!

• HP Photomart D110 all-in-one cannot install drivers

  I can't get the disk to load the software on my laptop Toshiba P500 windows 7, brings it to the top of the screen that says to continue with the installation it is necessary to restart the computer to remove the files. The installation screen that gets only a distance on restart and then tells you to reboot to remove the files again. The installation will not past the scene of the computer control. I tried to download the drivers and software from the HP site but the same problem occurs. I was able to load to load all the software from the disk on my old laptop XP with no problems.

  The plug-and-play usb on the Toshiba also does the same thing, it detects that there are no drivers for the D110 and when Windows downloads drivers installation fails exactly in the same way. Any ideas out there?

  As I was scrolling through solutions for the other all-in-one on another thread I seem to have found the solution. I managed to install the drivers to do printing via a USB cable, but nothing else. After you remove the D110a of devices and printers, then click another device and select the print server properties. Select the driver tab and select the drivers D110a and select Remove. Click on remove drivers and driver package. Restart the computer after the driver and the package is deleted. Then load the software from the cd.

  I wish I could remember which thread was here, but everything worked fine after that.

• C3180 all-in-One: re = install

  EU all-in-one type C3180 for 5 years. Good.Had to uninstall.

  Efforts to re - install keep failing. Message implementation. Please correct RUN As.

  I am only user and administrator, so can not understand the problem. Tells me to remove the disc, close and log on as administrator. I always connect one. All ideas are welcome. Followed instuctions of the forum L4un - install.exe.by Travis C posted 11/04/2012, who are very clear and concise.

  @dotage, welcome to the forums!

  I read your post on how the installation fails when you try to install your Photosmart C3180 on your Windows Vista system. I have a few suggestions in mind to start thinking.

  Before any software/installation troubleshooting, please reset your printer and make sure that the printer will make color copies, black and white with success. This is very important because it tests the material first. The printer must be in good working order before trying to install it on the PC. If there are hardware problems, the installation will fail.

  Reset instructions:
  Press the power button to turn the product on.
  With the product, unplug the power cord from the back of the product.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the product.
  If the product does not light by itself, press the Power button to turn it on.

  If the working copies, allows to go ahead and try these steps from the PC:

  1. Perform a clean boot
     
  2. Restart the PC
  3. Download and run the installation online here: HP Photosmart C3100 C4100 all-in-one full feature software and drivers

  I hope that the installation has gone through without problem after the steps above. If the installation failed, save error messages or codes and let me know all the specific information you see.

  I hope to hear from you, good luck and if you want to send me a "thank you", click on the thumb to the top below!

• HP Officejet 4630 e-all-in-one: problem of margin Officejet 4630

  I need to have a few very small margins on a document.  Even if I set the margin to 0, when I print it is always about a 1/2 inch margin and cutting off content that shows well on the page mode.  I use a Mac with os x Yosemite.

  Help please!

  Hello @lauriekeys,

  Thanks for getting back to me about this issue. I'm sorry to hear that the setting without borders could not solve your problem. Now, I'm going to make sure that your driver is properly installed on your Mac OS X 10.10 Operating System. On Mac OS X 10.10 sometimes a generic driver from Apple AirPrint will load on your printer and gives you only the basic printing functionality. To ensure that this is not the case, can I please have you perform the following steps:

  How to check the driver:

  1. click on the menu Apple and then click on System Preferences.

  2. click on Print & Scan

  3. click the name of your printer on the left side, click the sign minus (), then remove the printer.

  4. click the sign plus (), click Add a printer or a Scanner, click the name of your printer.

  5. click on the area of use or with the help of Print and then select the name of your printer in the context menu

  

  6. click Add to add the printer to the list.

  7. close Print & Scan

  Once the correct HP Officejet 4630 e-all-in-one printer driver is checked during loading, please try printing your document again.

  If the issue persists, please should I tell you:

  1. what type of program you are using to print the document with the small borders of?

  2. What size is the page that you print with small borders (letter, legal, 4 X 6, etc.)?

  Please let me know if the steps I have provided resolve your problem of margins. I look forward to hear from you!

• HP Deskjet 3520 all-in-one: I installed the HP utility to scan, but the 'Edit analysis jobs' button is grayed

  I installed the HP utility to scan from my HP Deskjet 3520 to my Mac Book pro, but the "edit scan tasks" button is grayed out. I can only scan one page at a time, but one I want to scan multiple pages

  Thanks for the reply back @cjbd,

  You are able to open the HP scanning software when you perform a search from the Mac?

  You try to scan several pages from the printer to the Mac or from the HP scanning software?

  You should be able to open the HP scanning software and edit everything from there.

  Normally, you can select PDF to scan in a single file multiple documents if that's what you try to do.

  Because this model only has a dish, you must be notified to scan another page.

  Here is a document for digitization of the control panel of the printer: HP Deskjet 3520 e - all - in - one and HP Deskjet Ink Advantage 3520 e-all-in-One Printer Series - how to perform a scan: from the control panel.

  If the HP scanning software does not work, you will need to uninstall and reinstall the software again.

  I handed the document to uninstall: Printers HP - uninstalling the software of the printer (Mac).

  Here is the link to the drivers: HP-inkjet ink-SW-OSX - Mavericks_v12.34.40.dmg

  Please get back to me. Thank you!

• OFFICEJET 5610 all-in-one: PROBLEM WITH OFFICEJET 5610 all-in-one

  I used an all-in - One HP 5610 since 2008.

  A few days ago the printer stopped working and gave me "error: 0xd05d010d Reset power", the lights on the buttons 'ON', 'COPY', 'FAX', 'SCAN' and the 'QUESTION MARK' on the front panel are on.

  I tried each proposal given by other users, for example to remove cartridges, reset the printer with #3 or #6 or #9, remove usb cables and electricity... but no result.

  Finally, I am in front of a printer will not work for me, with all of the above, more continuous "beep" and removed cartridges.

  Is there other option/proposals to test?

  Tanks in advance for your help;

  Hi @pankal,

  Welcome to the HP Forums!

  I understand that you get the error: 0xd05d010d Reset power with your HP Officejet 5610 printer. I am pleased to see that for you!

  "Please make sure that the steps in this guide, ' 0xc19a0005" or similar error screens are completed.

  If this does not resolve the problem the printer will need to be repaired / replaced. Please Contact HP phone support for hardwareoptions. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I hope this helps!

• HP deskjet 3050 j610 all-in-one problem with tricolor cartridge

  display printer with three colors cartridge.this problem is a unit recently news that functioned until what I moved the printer in another room today. can anyone help

  Moved from feedback

  Original title: hp deskjet 3050 j610 all-in-one

  What is the exact message that you found?
  My advice would be to pull the cartridges and make sure that the ink didn't sink. The printer "bumped" or dropped everything moving? The cartridges have been pot just enough to not be seated more.

  SC Tom

• HP all-in-one printer install software "think" the software is already installed - it is not.

  I have a printer all-in-one HP Photosmart C8180, connected via USB directly to my Windows 7 system.  Over time I installed, updated and uninstalled the software.  At the present time, when I try to install the software is properly run, it did not install the software.  If I click on "Advanced" installation option, I see that it "thinks" most of the support software is 'already installed' and it won't install it.  I tried to uninstall, but it will not uninstall it (because it is not installed).

  

  I can print fine, I can get the driver installed, but I would like for all supported software must be installed also.

  How can I get the installation package to acknowledge that the software is not "already installed".

  Hello

  Open the content of the CD, run the Uninstall L3. at the bottom of the path...
  CD > Util > CCC > uninstall L3.bat

  Once it is completed, and then restart the PC and reinstall the S/w.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• ENVY 7640 printer all-in-one: problem software printer after updating to Windows 10

  After updating Windows 10, my HP ENVY 7640 all-in-one printing software does not open.  A dialog box appears asking if I want to install a new program.  How can I get the software of the printer to open?

  Once you upgrade your computer to Windows 10, you upgrade your printer for Windows 10?

  Go here...

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-7600-e-all-in-one-printer-series/6617267/model/6617268

  Download and install the drivers and full software.

• HP Photosmart C4450 all-in-one: cannot install HP C4450

  I want to spend my HP photosmart All in One to my desktop to my laptop.  Both computers running Windows 10.  When I try to add the printer, it says "the printer that I want isn't listed" I went to the HP website and downloaded their assistant for installation [a driver and it came with "no solutions are available for your product," How can I install my printer on my laptop?]

  glyn999

  Hi glyn999,

  Welcome to the HP Forums!

  I understand that you can not install your HP Photosmart c4450 printer on Windows 10 operating system device. And I'm happy to help you!

  According to this guide, Windows 10 compatible printers. It does not specify that this printer is supported for Windows 10. However, I don't see not all the drivers on the support site for software for Windows 10. However, as a solution, I recommend trying the Windows 8.1 drivers. Series all-in-one printer, HP Photosmart C4400/C4424 full feature software and driver. These drivers must also work for Windows 10.

  Let's start with this option, and we will see what happens!

  I hope it works for you!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP C5180 all-in-one problems

  Hi, I have a C5180 all in one, the problem I encounter is that it lights up but nothing happens then the blue screen appears and a small white line begins to run along the bottom and right, from time to time the judgments of the white line and the screen looks like its refreshing but nothing happens. Can someone please. Thank you.

  Hello

  You could try resetting the all-in-one.  To do this:

  Let the printer, unplug the power cord at the back of the printer, remove power from the wall.  Wait 60 seconds and reconnect the power supply on the wall, then reconnect the power supply on the printer.  If the printer automatically turns on, then turn it on.  The printer must go through a series of implementation of activities.

  See if that helps