you need your printer installation cd

Similar Questions

• Cannot boot from the Windows 7 installation DVD. Error when installing XP "this installation disc is not compatible with your version of windows. To upgrade, you need the correct installation disc.

  Please help me

  Why my cd not DVD boot? will have a difficult time install my win7 home ed I have xp and the note ""this installation disc is not compatible with your version of windows. " To upgrade, you need the correct installation disc. For more information, see your computer system information. To install a new copy of Windows, restart (boot) your computer using the installation disc, and then select custom (advanced option). "always keep flashing... I already did your post, but I cant stand dvd always turn to windows xp? and my driver working I just installed win xp months ago

  Hi the prey,

  ·         What is the brand and model of the computer?

  You should check the settings of the computer BIOS (Basic Input\Output System) to boot from the CD/DVD. Check the manual or the support of the computer Web site for the same.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Run the Windows 7 Upgrade Advisor to see if your computer is compatible to install Windows 7.

  Windows 7 Upgrade Advisor - download - Microsoft Windows

  See also:

  Installation and reinstallation of Windows 7

• do you need your router firewall

  Do you need the firewall on the router.

  Yes, you should activate and configure WPA2 security.

• Need your help: installation of SQL authentication

  Hello

  I put the last finishing touches on my SRM 4.0 book. And I have a moment of doubt. I documented creation SQL2K5 MS with the SRM for SQL authentication, but I'm lacking confidence in the steps, because I don't know if they are 100% as a good administrator SQL them would.

  Anyone here (or anyone here could) give me an approach step by step to Setup they used in production - which meets the standards of the company?

  If I can't be 100%, I do the right way, I don't want to take the risk to include instructions that may not be 100% up to the mark...

  Concerning

  Mike Landry

  RTFM education

  http://www.RTFM-ed.co.UK

  Author of the book of MRS: http://stores.Lulu.com/RTFM

  Free PDF or printed at price

  Hi Mike,.

  You have probably seen this document on VIOPS: http://communities.vmware.com/docs/DOC-11547 called "install and configure SQL Express 2005 for use with Site Recovery Manager V4» But in case you missed it, this is a great document, and what I used to do this. As the title suggests it is for SQL Express, but I doubt if it should be different on the full SQL Server.

  Kind regards

  -Poort

• HP Envy 4502: password printer installation

  I try to install the 4502 want on a Mac and asks me a password by the installation program. I thought maybe would it be Mac-related but Apple tell me it's the printer installation password is necessary.

  Hi @NancyGal,

  Welcome to the Forums of HP, I would be happy to help you install your printer. I understand that you want 4502 and trying to install you are be prompted to enter a password. The install password is always your Mac password. Macs are asked to enter a password whenever you install something. If you do not have a password for Mac you can leave the field blank and click OK.

  Please let me know if that solves the problem and if you need help I can help you further. If the question is indeed fixed, please click Accept button Solution below to report your post as solved.

  Thank you.

• Two devices Fax listed when you try to print from Internet Explorer metro

  Hello.  Our Pro Officeject 8600 is ranked twice as "Fax - HP Officejet Pro 8600" when access to the 'Peripheral' charm in Windows 8 Pro 64 bit and try to print from Internet Explorer of Metro.

  One of the two brings in fact appear Fax options, while the other will be printed as usual, but you must use some trial and error when you try to print.

  It is specific to IE connecting the metro interface as the desktop IE printer appears as normal.

  I want my printer to appear as a printer and not a fax, so that I don't have to guess...

  Any help would be appreciated.

  Thank you.

  This isn't a problem from the point of view that the software works in fashion, it is supposed to. When you install your printer it installs two drivers, one for fax and one for the printer, because they are two totally different functions. If you find it difficult to distinguish between them, I would recommend renaming as I mentioned above.

  Uninstall and reinstall the printer will not change this fact.

  I would like to know if this is the information that you need to hear!

  Have a wonderful day!

• Only need to print a small section of a page? Use this command!

  So, you need to print an image and text below, but you don't want to waste the ink for the entire page?

  Use the command: command + shift + 4

  
  This command will allow you to make a selection on a page to print. It will then export an image on your desktop of the selection.
  

   

  Here's a great video on how it works.
  

   

  I hope this helps some users out there who often need to select parts of a document to print, such as images and information on a web page.

• How to maintain the life of your printer

  It seems more common that everyone feared how to maintain the service life of the cartridges from the printer itself.  As many variations of parameters and environment may play a role in how long your ink will actually last. A more official document can be found here about the science behind the ink, how to use it and how to make it last longer.  I will get into issues that affect the overall performance and life cycle of the printer.  I recommend to use the Startup ink supplied with the printer until he is gone because it contains chemicals of this condition and prolong the life of the print head for future use.

  I urge users to keep the printer connected directly to a wall outlet (namely for troubleshooting purposes). As with all electronics that are showing signs of failure, you can start with the power source if one really wants to follow the flow of a schema logic.  By eliminating the devices that can not to themselves, you removed a piece more equipment from the equation.  A more specific reason would be due to electromagnetic interference.  Wireless devices are vulnerable to interference with symptoms like error messages of false, lines in digital images, strange noises and frequent jams.

  Surge protectors must regulate the power distributed to each connected device.  It is possible that the printer is not the right amount of power and may fail as the printer power problems in hibernation mode with more features like duplex printing, it is impossible to recover , cable USB not detected and the light on the module displaying a yellow instead of green.  If the module and the surge protector are fighting for the control, it can cause a variety of problems that could easily be repaired by plugging the printer directly into a wall outlet.

  The next major issue many users face is the print head.  It is as well as the maintenance of ink as well.  It is important to clean the print head and the best way to do that is to use it and keep the good ink in the printer.  Over time, the chemicals can not even begin to change or develop air bubbles in the cartridge.  Not to mention, ink (well pigmented) still contains fluids that can evaporate if the printer is not rooted and off properly when not in service.  Of course, some of the processes of preparation printer used when the power of the printer can use very valuable ink, but, on the other hand, it's good for the life of the printhead to leave these processes to perform according to its specifications.

  The print head is composed of tiny nozzles and parts fragile this is why it is also one of the most expensive areas of the printer.  Most printers contain many self-cleaning utilities which is recommended to regularly (I suggest at least once a month) to help keep the printhead clogging and causing stains on the sheet itself. There are a number of unconventional methods to try once the printhead has dried up in fact, but when you try these steps you may totally break the part.

  Dust and smoke particles can also cause problems with the print head, but the printer entirely.  It is often the main killer of electronics as well as hairs and animal dander, dirt from moisture and humidity, paper for printer cheap and sand.  The air is full of impurities and really can not be prevented.  Preventive measures can be taken with dehumidifiers and a uniform cleaning, but over time, there is no real way to prevent it from happening.  Dust and air blowers have been known to cause not only solders to separate but may deposit particles of dust in places that could actually damage the printer entirely.  Instead, a favorite device is known as an empty computer.  It helps to remove the fine dust in the sense just that pushing forward into the printer.

  Paper jams also cause many more problems if is not removed correctly. HP recommends pulling the paper in the direction of the gears.  When removing a paper jam, you won't hear a grinding because it leads finally to the teeth are stripped like a screw, but simply once fully detach one of these devices. It is virtually impossible to fix a paper roll or similar because all parts are connected to each other and not sold in parts stores.

  At the back of most HP printers, you can remove the rear access door or duplexer (double-sided printing device) and easily join the paper in this way.  If you see the paper jam is located next to the Board, and then remove the piece from the back and take the paper with both hands to apply a gentle tug of same, and you should have no problem in removing the paper in this way.

  Paper quality can play a large role in the life of your printer.  Cheap paper can free of paper dust up into the gears and small machinery within the printer and are very difficult to clean.  Print incorrect parameters and issues related to food can cause the paper to stay in places that are not as easy to do.  In this case, remove the paper as long as slowly and patiently as possible to avoid them ripping out pages in places like between the wheels under the printhead and also causing error messages that will not disappear.  When troubleshooting printers, patience and troubleshooting documents will also help you keep your printer running longer.

  The printer doesn't like to not be put off by anything other than the power button.  I have always recommended the printer off when not in use (at least for long periods of time) to help keep the ink dry and high printing quality.  The reason why it is not recommended is because people will be unplugging the printer, while he is doing something and the negative effects that this might have some alignment problems serious, burn the computer chips and components similar to that in computers, fake error messages and possibly bricking of the printer if done at the wrong time.  Resets hard are great troubleshooting steps, but the abuse of this feature can result in irreparable damage.

  Fanning the paper before put you in the status bar is a good practice. About 25 sheets are perfect, because an overload of the status bar may also cause paper jams.  The paper guides of setting and selecting the appropriate paper type will put the science behind these settings wisely. Don't put paper in the tray while the printer is printing, crumpled, dirty, or coexist paper types and paper clips are all things to avoid.

  Software and communication issues deserve a section all to themselves.  The measures to prevent problems of this kind could not covered in a post, let alone a chapter.  The best thing to do to increase the performance and connectivity is to set a static IP address in the URL embedded in the printer if the printer is set up on a network (steps to do this are different from the printer to the printer).  USB cables must not be more than 3 meters long and kept in good condition as well as the power supply cord.  Keep your valuables out of reach of children and buy an extended service plan for many reasons.  You can enjoy all the services offered with a service plan in the case of a defective printer or simple product questions.  Keep the firmware up-to-date and to read reviews before you buy any electronic device.

  After reading this, I'm sure you're aware, that's all common sense, but at the time where you do not consider one of these suggestions you think back and wonder "if I had taken 10 seconds longer to avoid that I wouldn't spend 2 hours more set.»  Mistakes are made when frustrations and lack of care.  These are not delicate machines that deserving the highest shelf in the bathroom, but an understanding must be met, that once it's broken this avoidable?

  Troubleshooting of many documents can be found at www.hp.com/support.  They must be followed in order to avoid the repetition of the steps, steps unnecessary and causing more frustration.

• "You are not allowed to change the settings for this printer. If you need to change the settings, contact your system administrator.

  XP Pro, SP3. I downloaded the free Bullzip pdf printer. Somehow my old printer pdf in my printer disappeared list which I have used for years. I get this message when installing - "you are not allowed to change the settings for this printer. If you need to change the settings, contact your system administrator. I click ok and it ends, but it doesn't work. It does not appear in the printer control panel as a printer to change anything.

  I built this computer at home and I'm the only one using it. What is this function 'administrator '? I've never had to administrator on any program. Never. That is what it is?

  CNET is infamous for the grouping of things in its downloads as much a / v programs report as junk (I went through the same thing using eSet NOD32 has / v).  I seem to remember that if you ignore the warning and download the exe file and then use a tool like the free 7-zip to extract only the file necessary to run the program you want, you can work around the problem.

  For a pdf printer free which is not CNET - and works well - go here--> http://www.cutepdf.com/products/cutepdf/writer.asp

  EDIT TO ADD A LINK:

  See, for example, http://forums.cnet.com/7723-12543_102-582307/safe-downloads-cnet-com-sorry-but-not-anymore/

• 8 blocked installation of windows to "you need to add your languages in windows 8.

  Hi all

  So I tried to install windows on a computer 8 portable gateway that has windows 7 ultimate. I have a product key for windows 8, but not an installation disc. I used windows on the site Downloader and need the product key but continues to stop at the blue screen "something happened" and it opens Google chrome and going to another blue screen and it says "you need to add your languages in windows 8" on the right is a button 'confirm', but it does not work. " I went into the Panel of control-> system and security-> windows update-> and I've updated all language packs who was there, who took like 3 days. I also clicked on the restore hidden updates and there was nothing there. I can't get past this problem and any help will be appreciated.

  Thank you

  Tim

  So I never found on the forums on how to solve this problem, so I contacted Microsoft support online. I told them that I kept getting the message "you need to add languages to Windows 8" and that they have all been added but would not click "confirm". They have tried, and then eventually told me that I have to do a clean install. I have made an installation disc, restarted the laptop and went in the bios and started with the disc. It was a good cause, I had to wipe the old partitions that used space. Installed and it worked. I ended up spending to 8.1 and after downloading I decided to try to get 10 Windows. I couldn't get the icon to show so I googled this problem and found a way to update without the icon. That and now I have Windows 10. The link below is the page I used, and I hope that this helps someone out there. Good luck.

  http://www.InfoWorld.com/article/2954362/Microsoft-Windows/you-don-t-need-the-Windows-10-free-copy-icon-anymore.html

• Reset the printer: what you need to know

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  If the printer has already damaged due to her fiddling in the care of the menu, you may need to Contact HP for (paid) service.  Best not to do the damage in the first place...

  An example of the damage that may be caused would be the printers that use special cartridges installation.  Reset the printer to factory conditions can cause sound to demand once again the cartrdiges Installer.  If the original cartridges of configuration have been exhausted or discarded the user must contact HP for cartridges to install since there is no distribution channels.

• Do you need to download the printer drivers?

  The reason why I ask, is I get poor results of my Canon Pixma MG7550 printer. (Prints are dark with low contrast). The manual of the printer displays a panel of color options in the print dialog which I did not. Apple indicated that there was no need to download the drivers, but I was wondering if the reason for which I don't see Color Options Panel is because the driver of the Apple does not have the full set of options.

  I'm running on a MBP 10.11.5 and help affinity Photo as photo editing software.

  Thank you.

  Trying to install Canon drivers for your printer.

• I have an old MAC and need a printer for 10.8.5? Any ideas? Thank you

  I have an old MAC and need a printer for 10.8.5?  Any ideas?  Thank you

  Greetings @Tia10,

  I see that you are looking for a printer, you can use with your Mac 10.8, and I found a document that can help you.  Print HP Printing Products - products HP with drivers supported in OS X 10.8 Mountain Lion, OS X 10.7 Lion and Mac OS X 10.6 Snow Leopard.

  Hope this helps,

• Is the monitor of imagery needed on the taskbar if you do not print? How many...

  I have checked old solutions here and do not have quite the same issue, I would like to ask.

  I have the Solution Center on the old pc with XP. Works well, thank you, and several resources always help the XP'. I also have a HP with 8. How many resources it takes and don't forget that it is a netbook pc which tend to be more slow start. All I could eliminate might help.

  My question is on the XP that monitor must be loaded every time if you do not plan to print? Could not be loaded just before the solution center if that was the program that I run?  Thank you very much!

  'Jack :-{D '.

  I ALWAYS KUDO AND MARKED RESOLVED. It is THE RIGHT THING to DO... doncha know. «  :-D
  Find thumbs upward, then click on to a KUDO
  Look to the right and see the OPTIONS to mark ACCEPT as a SOLUTION. Thank you!

  Hi @jnepoore,

  Now, I'm not 100% certain, but I'm sure that the digital imaging monitor is not necessary. However it helps maintain a constant communication between the printer and the software. Take a look at what I found:

  Posted by rnfolsom

  Picardjc wrote that "Digital imaging monitor is part of the HP software that communicates with your HP printer. This program allows to read the ink levels, get an out of paper message, scan from the device to the computer and so on. Its not necessary, but it will limit the use of printers if you delete. "Understood. But for my printer HP Officejet Pro 8000 A809a, what is the purpose of having the digital imaging monitor icon in the taskbar Windows7 sp1 of the Notification area (aka system tray)? My A809a is NOT an all-in-one that includes a scanner; It is simply a very good printer. When I start to print something, if you need ink or paper, that information is displayed on the screen of my computer. So I ask again: why is the icon of monitor digital imaging on the taskbar? I clicked on at the time of this icon (I not print anything, but as usual, the printer is turned on), and nothing happened. R.N. (Roger) Folsom
  

  P.S., Below I'll post some other discussions (with links to their locations) of the digital imaging monitor, I discovered before finding this site on which I am writing. There are a variety of opinions on what makes the digital imaging monitor. HP Digital Imaging Monitor is for HP director system tray access. This is necessary if you want to use the buttons of all-in-one on a HP printer all in one to scan documents or transfer photos from a camera manually. Closing the icon monitor HP digital imaging in the Windows system tray can cause the HP all-in-one to lose part of its scanning features and not the connection error message. In this case, you can restore all functionality by restarting the computer or by starting the HP digital imaging monitor. SOURCE: Yahoo http://answers.yahoo.com/question/index?qid=20080115093754AAlajpq
  

  Re: WITHDRAWAL HP Digital Imaging Monitor Systray? [Edited] 03/08/2011 14:05 - edited? 03/08/2011 14:08 Yes, it is safe to remove. In my view, it is usually in the program group under start / all programs / startup. Simply navigate under the Start button, right-click on it and delete! If it is not there, then remove it from the registry: run regedit and go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run and delete it from the list in the right pane. If she is not there, then try hkey_current_user\\software\\microsoft\\windows\\currentversion\\run it's better than using msconfig and uncheck it. In my opinion, msconfig must always be set to Normal startup. Your printer will always print without that annoying obstructive utility called Digital Imaging Monitor. Ciao! Casey Henderson, MCP SOURCE: http://h30434.www3.hp.com/t5/Web-Printing-Software/REMOVING-HP-Digital-Imaging-Monitor-from-Systray/...

  I know that the information is specific to Windows 7, but the bottom line is, no, there is no need to run all the time. Registry keys are significantly different for XP as they are for Windows 7 while blurb does not apply. I just copied the post in its entirety for you to read through.

  Another thing to consider is uninstall the software and then download and install the base driver.

  Please let me know if this is useful, or if you have any other questions. I'm happy to do my best to help.

• You need to unplug the 10 pro printer when you print not for days or weeks?

  You need to unplug the 10 pro printer when you print not for days or weeks?

  ebiggs1

  Thanks for your reply.