you try to run photo screensaver on 2 monitors

Similar Questions

• I downloaded the trial version of Lightroom on my MacBook running El Capitan. I get the following message appears when you try to import photos: your update of Lightroom 6.3.0 drive to which you import images is low

  I get the following message appears when you try to import photos: your update of Lightroom 6.3.0 drive to which you import images space is low. Delete files or empty the trash to make at least 250 MB available before continuing. ??? What it means? I'm not using a disc, a have a lot of space on my Mac.

  Of course, you use a disk. When you import, you place a copy of your photos on your computer's hard drive (or external hard drive). The meaning of the error message seems very clear. What part of this do you not understand?

• I get "command not found" error to the linux terminal when you try to run the tar.bz2, ACE extracted in the installation instructions. Any advice?

  I extracted to the terminal linux firefox in my own repertoire and you try to run the executable file called firefox. But he's saying "command not found".

  You seem to have 64-bit Linux because Linux versions served on mozilla.org are 32-bit.

  FTP://FTP.Mozilla.org/pub/Firefox/releases/21.0/Linux-x86_64/

• Error when you try to run an application that worked when built with 8.6

  I have a simple program that I wrote in the 8.6 version that I've never had a problem generation and execution of applications built with it to 8.6.  Two weeks ago, I got 2009 by mail because we had very recently purchased 8.6 and I get errors when you try to run an application built with the same code using 2009.  The error relates to the Mean.vi.  He claims that he can't find it.  The error I get is as follows:

  Error loading VI 'NI_AALBase.lvlib:Mean.vi '.  LabVIEW support 3 error code: could not load façade.  I don't have access to the front panel of this vi, so I wonder if there is a problem with the runtime and not my code.  Please answer as soon as possible because it will quickly start to the impact of my calendar.  Thank you.

  Hello!

  The same problem ?

  I talked with my local OR technical support team. The application now works without any problem.

  Rule of thumb: when creating a Setup program do not forget that the option "Run Time Engine xxxx" in the category "Other installers" is selected despite the fact that the runtime is already installed.

  Best regards.

• Get "communication error with kernel" message when you try to run a virus scan program

  Get "communication error with kernel" message when you try to run a virus scan program

  Hello

  What antivirus do you use?

  Follow the steps in the article mentioned below and check if this solves the problem.

  
  The error message "error communicating with kernel":
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN2280

• I get the following when you try to run programs such as Nero "this program requires the file AdvrCntr6.dll, which is not on this system."

  I get the following when you try to run programs such as Nero:-"this program requires the file AdvrCntr6.dll, which is not on this system."

  Please can you help me?

  Original title: AdvrCntr6.dll

  Hello.

  There is a guide for fixing here:

  http://pcsupport.about.com/od/findbyerrormessage/a/advrcntr6-DLL-not-found-missing-error.htm

• Constant "paper jam" when you try to print photos

  Hi all

  I get constant "paper jam" error when you try to print photos on HP Premium Plus photo papers. I use 13 x 18 cm and A4 documents. I gave up a single sheet of A4 paper and printed the printer self-test report and it shuts everything OK.

  I already followed the instructions of rolls to power clean paper, but without effect (for example http://support.hp.com/us-en/document/c01123477

  I'm about to give up and look for service but the strange thing is that jams only when I try to print photos (for example from Lightroom) but is allowed when copies of documents or printing self-test report.

  Any advice here?

  Thank you

  Adam

  Hi MissTeriLynn,

  Troubleshooting instructions made me pick up the problem with Lightroom. I came across a statement "some other Adobe software users have reported conflicts with HP printers. They tend to have long names and a simple change of name of the printer, for example to something like desktop printer or MYPRINTER seems to work"(here).

  And guess what. It resolved my problem as well. I have configure most of the options of printed model but the printing again.

  Thank you very much for the support provided!

  See you soon,.

  Adam

• Error when you try to run Quicken 2011: this program is not supported under XP

  Win XP pro - Quicken 2011

  I am running win XP pro. When you try to run Quicken 2011 I get an error message: this program is not supported under XP.  What I do toget Quicken supported?

  For help on Quicken, I recommend posting your question in the community live Quicken .  The people there can help you better as we can in this forum of Windows. Boulder computer Maven
  Most Microsoft Valuable Professional

• Error code 0 x 80248014 when you try to run MSE Update on Vista 64 bit OS

  Tomb guard Windows Update crashes when you try to run the Service Pack 1 for Vista 64 even if it seems to have installed service pack when I view installed updates.  Update the window continues to show the service pack update according to availability.  So far, I ran it three times and he shows as installed three days in a row, but he does not appear in the properties view and continues to show an available update when I check for updates.

  It's a little confusing because the error code 0 x 80248014 appears when you try to update to MSE, so there seems to be two issues.  The MSE error one and two, the apparent success of the installation of the Service pack 1 for 64 bit Vista Home Premium but not appear in the properties view and always appear when checking for updates, even if each attempt to install appears to be successful.

  Hello

  Run the system update tool

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool

  Retry the update

  Reset the Windows Update components

  http://support.Microsoft.com/kb/971058/en-us

  Error MSE - which describes the boots s. is what will do the above tools.

  http://answers.Microsoft.com/en-us/protect/Forum/MSE-protect_start/error-code-0x80248014/3c3f7fca-F9E0-4D50-afa2-63acab6fb163

• When you try to run Linksys Wireless Network Monitor error: cannot load ProcNICs.dll, Can t Load Res_dll

  Original title;

  Linksys wmp54g & windows vista

  When you try to run Linksys Wireless Network Monitor I get the following errors:

  Cannot load ProcNICs.dll

  Failed to load Res_dll

  Linksys wireless adapter is installed and running properly, but I can't use the application linksys to establish a new network connection.

  Any suggestions?

  Thank you.

  Hello

  I suggest you contact Linksys for assistance:

  http://home.Cisco.com/en-us/home

  Linksys Support link:

  http://homesupport.Cisco.com/en-us/support

  I hope that helps!

  If you need help on Windows, please keep us informed.

  We are here to help.

• When you try to run chkdsk, it tells me which cannot be executed, the Volume is in use by another process, but trying to run at startup, I am told that the chkdsk command has been cancelled

  When you try to run chkdsk, it tells me which cannot be executed, the Volume is in use by another process, but trying to run at startup, I am told that the chkdsk command has been cancelled. message also indicates that there are errors.  How can I me then chkdsk to run

  Hello

  See if these two tutorials to help you with this.

  "How to run the check disk at startup in Vista or Windows 7"

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  "How to difficulty Chkdsk will not run at startup in Vista"

  http://www.Vistax64.com/tutorials/130824-CHKDSK-will-not-run-startup-Vista.html

  See you soon.

• You try to run any .exe gets the pop-up message "Please select the program to run rundll32.exe.

  Check on a friends computer; It can run internet explore unless she added as an administrator. you try to run any .exe gets this pop asking what program to run this title?  It could be an association of .exe that is messed up, or is it probably some strange virus?  I tried to install IE9, I was able to download but are unable to run.

  Start here (especially if you are not familiar with the UAC in Vista & Win7)-online http://windows.microsoft.com/en-US/windows-vista/User-Account-Control-Overview

• 8024A 000 error code when you try to run Windows Update on Vista 32-bit

  I get the above error when you try to run Windows Update on Vista 32 bit.

  I use an Asus laptop and have used the Asus recovery cd.
  I just replaced the old HD (500 gb) as it failed with a 750 GB HD.
  I tried the SP1 upgrade to SP2 and this causes a "catastrophic failure".
  Any help would be greatly appreciated.
  Thank you
  Sam

  Thanks for the support. I got the Asus machine this morning and they have corrected the problem in a few minutes by running a short script. In my view, that it is a common problem with Asus and Western Digital HD. Anyway congratulations to Asus. Here, after the service is impressive.

  See you soon
  Sam

• When you try to run a system recovery I get this error: cannot start Windows. A recent hardware or software change might be the cause. OxcOOOOOOf

  When you try to run a system recovery I get this error; OxcOOOOOOf

  Original title: error OxcOOOOOOf

  My laptop crashed. I used my initial recovery to start. I get a message from Windows Boot Manager as follows:

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have this disc, contact you system administrator or computer manufacturer for assistance.

  File: \Windows\system32\winload.exe

  Status: OxcOOOOOOf

  Info: Seelected entry could not be loaded because the application is missing or damaged.

  It does not work. Suggestions and no, I have not modified before the crash.

  I loaded my recovery disk for my 32-bit home edition of vista Hp pavilion dv6700 cto entertainment lapt top and after going through the recovery process I just get this mechioned of the screen in the original question. How ever during my recovery process never got far enough to enter my product code, he asked just a two disc and disc supplamentry and then gave me a blue screen black for a minute or two then rebooted and showed the failure of start OxcOOOOOOf screen... what should I do?

  Hi Anthony206,

  Since you've already tried to use the Windows Vista recovery disc has received from the Original Equipment Manufacturer (OEM).

  From now on, you can only contact OEM for the use of the recovery feature.

  I hope this helps.

• Code of State 800070663 when you try to run Windows Update

  I get the State 800070663 code when you try to run Windows Update. The update fails. Someone at - he encountered this before?

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx