You try to start a wireless router for my laptop. Can't define a wp5 Netgear wireless router should I can work only.

Similar Questions

• When you try to connect to my router using the IP address, he continues to ask for a password of windows security.

  When you try to connect to my router using the IP address, he continues to ask for a password of windows security.  I don't know what it is, I tried recording with every combination I can think.  Can anyone help?

  If you do not know the password of the router, then chances are good that you will need to reset it to the factory settings. Google your model and you should be able to find the instructions.

  I hope this helps.

• I have error code 8024200d when you try to update and install SP1 for Vista

  I have error code 8024200d when you try to update and install SP1 for Vista. I'm currently running Vista Ultimate. Any help would be appreciated.

  Thank you!  Matt

  Matt,

  The 8024200d result code indicates WU_E_UH_NEEDANOTHERDOWNLOAD
  Update Manager did not install the update because it must be downloaded again.
  Suggest you download and Save the complete stand-alone package of Vista SP1.

  Links to the standalone versions are on this page because you validate that the edition of Vista is x 86 (32-bit) or x 64 (64-bit). You can see the architecture of the system of opening in the Panel and next to the search System system type: Windows Vista Service Pack 1 (SP1)

  Before attempting to apply the SP1 please consider this information-

  If you choose to install Windows Vista SP1 via the standalone installer available on the Microsoft Download Center, Microsoft recommends that you first check Windows Update and install all drivers in option. Read the Articles in the Knowledge Base 948187 and 948343 for more information.

  Suggest you to create a folder on the root drive (the drive where Windows is installed, usually C:\) and name SP1.
  Move the downloaded Service Pack in the newly created folder.
  Disconnect all the devices, printer, external USB hard drive, etc.

  Then, Configure the system starts in a clean condition
  After you restart the worm as a clean boot, apply SP1.

  If there is still a problem with the installation of SP1, MS offer support chat and free e-mail to "help you to download and install service packs" here-
  Microsoft technical support

  Or, you can post here - MowGreen Windows Vista Service Packs/Windows Server 2008 Service Packs Windows IT Pro - consumer safety Expert

• When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up

  When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up.  The header says 16-bit subsystem MS_DOS.  For example, when you try to start Microsoft Word, the message says:

  C:\Documents and Settings\All Users\Menu demarrer\programmes\microsoft Office\Microsoft Office Word 2003.lnk program invalid file name, please check your pif file.

  I can start the program by clicking on any document in my documents file, however.  I know that something is messed up in the registry (we had a bad worm (MS Removal Tool).  However, I can't a registry cleaner to open.  I used a WinXP_EXE_Fix.reg to try to fix the missing exe file.  He has set a number of things, but still will not let me run a registry clean.

  Any help?

  Hello

  Try the following steps:

  1. follow the steps from the link below: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• When you try to run Linksys Wireless Network Monitor error: cannot load ProcNICs.dll, Can t Load Res_dll

  Original title;

  Linksys wmp54g & windows vista

  When you try to run Linksys Wireless Network Monitor I get the following errors:

  Cannot load ProcNICs.dll

  Failed to load Res_dll

  Linksys wireless adapter is installed and running properly, but I can't use the application linksys to establish a new network connection.

  Any suggestions?

  Thank you.

  Hello

  I suggest you contact Linksys for assistance:

  http://home.Cisco.com/en-us/home

  Linksys Support link:

  http://homesupport.Cisco.com/en-us/support

  I hope that helps!

  If you need help on Windows, please keep us informed.

  We are here to help.

• Error 'Windows cannot find c:\windows\system32\control.exe' when you try to start Control Panel.

  Original title: windows cannot find c:\windows\system32\control.exe

  Using Windows Vista 32-bit SP2. I get the message: windows cannot find c:\windows\system32\control.exe when you try to start Control Panel. I have to solve as soon as POSSIBLE

  Hello

  1. What is the brand and model of the computer?

  2. What is the security software installed on the computer?

  3. have you made changes on the computer recently?

  Method 1.

  Start the computer in safe mode and check.

  Start your computer in safe mode: http://windows.microsoft.com/en-SG/windows-vista/Start-your-computer-in-safe-mode

  If you are able to open in safe mode control panel, and then start the computer in a clean boot state and check.

  Affecting system boot minimum state helps in the identification of third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2.

  I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Method 3.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  I hope this helps.

• Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

  Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

  I've read other discussions on error code 80242FFF.  Based on suggestions from Microsoft technical support, I tried Mncrosoft Fixit.  Also, I started my computer in mode safetboot and tried to update.

  They did not work.  So, will you be able to help me find a solution?

  Thank you

  Ken

  Hello

  1. is that the copy of windows is enabled?

  2 is the issue limited to the installation of a security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)?

  I suggest to perform the steps in the following article and check.

  Method 1: run the Windows update troubleshooting tool and check.

  The problem with Microsoft Windows Update is not working http://support.Microsoft.com/mats/windows_update/

  Method 2: I suggest you to put the computer in a clean boot state and check if Windows update installs successfully.

  To help resolve the error and other messages, you can start Windows vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below for more details:

  How to troubleshoot a problem by performing a clean boot in Windows vista and windows 7:
  http://support.Microsoft.com/kb/929135

  
  Note: When you are finished troubleshooting, follow these steps in the section above to reset the computer to start as usual.

  Method 3: If the problem persists, follow the steps in the following article.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

   

  Note:

  un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ( )

  How to back up and restore the registry in Windows

  b) while running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  For reference:

  0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414

  Note:

  un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ( )

• software unknown error (0x00000d) exception when you try to start olympus master 2 prog

  When you try to start olypus master 2 has got the message "the exception unknown exception soft ware (0x00000d) occurred in the application at location 0x01ooo94818.

  I also looked in the management of the comp & found the following:

  Log name: Application
  Source: Application error
  Date: 2010-08-26 10:43:37
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Admin-PC
  Description:
  Failing application OLYMPUS Master.exe, version 2.3.0.2, time stamp 0x4b0d15c5, failed module ntdll.dll, version 6.0.6002.18005, time stamp 0x49e03824, exception 0xc015000f, offset error 0x0005b80a, process 0xd2c id code, start the application time 0x01cb450320f41867.
  The event XML:
  
   
     
      1000
      2
      100
      0 x 80000000000000
     
      53267
      Application
      Admin-PC
     
   
   
      OLYMPUS Master.exe
      2.3.0.2
      4b0d15c5
      ntdll.dll
      6.0.6002.18005
      49e03824
      c015000f
      0005b80a
      D2C
      01cb450320f41867
   
  

  Am not a comp expert so any ideas on how I can get this prog to start over?

  Tried to put in orig cd but even occurs.

  Thank you

  Hambman

  Hi Hamman1,

  1. were you able to open this application as soon as possible?

  Step 1

  Check the hard drive for bad sectors.
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Step 2

  If the problem occurs, you might uninstall and reinstall the application to a different location.
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Bindu R - Microsoft technical support.

• get the fatal error when you try to start Windows 7 Easy Transfer...

  get the fatal error when you try to start Windows 7 Easy Transfer... what should I do?

  Hello Jo,.

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the full error message or code when you say, ""getting fatal error when you try to start Windows 7 Easy Transfer? '"

  Thank you for details on the issue.

  This problem may occur because of damaged or missing Windows files.

  I suggest you run the system file checker (SFC) and see if it helps.
  Reference:
  Use the System File Checker tool to repair missing or corrupted system files
  https://support.Microsoft.com/en-us/KB/929833

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• You try to start the process J000 has expired. Please advice

  Dear team,
  
  I get lines in my .ora alert log file, and users report that they were not able to connect the database for three hours,
  
  
  
  
  Completed: alter database backup controlfile to trace
  Wed Jul 18 20:06:22 2012
  Beginning log switch checkpoint up to RBA [0x4389.2.10], RCS: 0x0873.dba119bf
  Wed Jul 18 20:06:22 2012
  Arc1: Evaluating archive log 2 thread 1 sequence 17288
  Arc1: Begins to archive log 2 thread 1 sequence 17288
  Creating destination LOG_ARCHIVE_DEST_1 archives: ' / ora_drplive/arch/drplive/1_17288.arc'
  Wed Jul 18 20:06:22 2012
  Thread 1 Advanced to record the sequence 17289
  Currently Journal # 3 seq # 17289 mem # 0: /ora_drplive/log/drplive/redo03.log
  Currently Journal # 3 seq # 17289 mem # 1: /ora_drplive/logmirror/drplive/redo03.log
  Wed Jul 18 20:06:22 2012
  Arc1: Archiving newspaper wire 2 1 sequence complete 17288
  Wed Jul 18 20:37:15 2012
  Filled checkpoint up to RBA [0x4389.2.10], RCS: 0x0873.dba119bf
  Thu Jul 19 04:36:08 2012
  You try to start the process J000 has expired.
  Thu Jul 19 04:38:15 2012
  You try to start the process J000 has expired.
  Thu Jul 19 04:40:21 2012
  
  
  
  
  I checked some view as
  
  
  SQL > select * from v$ resource_limit;
  
  RESOURCE_NAME CURRENT_UTILIZATION MAX_UTILIZATION INITIAL_AL LIMIT_VALU
  ------------------------------ ------------------- --------------- ---------- ----------
  process of 49 50 50 50
  51 59 60 60 sessions
  10 20 810 810 enqueue_locks
  10 75 8000 UNLIMITED enqueue_resources
  ges_procs 0 0 0 0
  ges_ress 0 0 0 UNLIMITED
  ges_locks 0 0 0 UNLIMITED
  ges_cache_ress 0 0 0 UNLIMITED
  ges_reg_msgs 0 0 0 UNLIMITED
  ges_big_msgs 0 0 0 UNLIMITED
  ges_rsv_msgs 0 0 0 0
  
  
  SQL > show parameter JOB_QUEUE_PROCESSES
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  JOB_QUEUE_PROCESSES integer 10
  
  
  
  Please sometimes what to check, how to solve this problem, because it comes every night, full backup also arrive and script to archive clean also run during the night.

  YM says:
  Uh,.
  I'm sorry Osama I don't see your answer. Excuse me...

  No problem.

• Help - Photoshop Elements 8 crashes when you try to start multimedia

  Photoshop Elements 8 crashes when you try to start the Organizer. It is funny, from the editor of Photoshop is not a problem and works fine.

  I uninstalled the software and then installed again, but had no effect.

  What can I do?

  Nick

  Hold down the shift Organizer launch wjilst, and then click to create a new catalog, for example My Catalog2

  If the empty catalog open try to import multiple JPEG files and this will help to determine whether the original catalogue is defective.

• I just bought an iphone 6 s second part and I got home put my SIM in there turn it on you try to start the activation process and he says that the phone is lock icloud, I tried calling get him etc. but he gave me the wrong information help please 91026128

  I just bought an iphone 6 s second part and I got home put my SIM in there turn it on you try to start the activation process and he says that the phone is lock icloud, I tried calling get him etc. but he gave me the wrong information and I called apple, they said that its nothing they can do without evidence of perchise im broke I spent all my money on the phone, does anyone know any software free or something me please txt to 9102612856

  @Santonio99

  You probably bought an iPhone stolen 6. Mine was stolen in Barcelona in Spain on June 10 by a pick-pocket. Fortunately, there is absolutely nothing you can do to make an iPhone locked to the activation of the work.  You have a paper weight.

• When you try to start Firefox I get a message saying "a copy of Firefox is already open. Only one copy of Firefox can be open at a time. "I started a new profile, but the Profile Manager always tells me that by default it is still in use.

  When you try to start Firefox, even once, I got a message saying "close Firefox. A copy of Firefox is already open. Only one copy of Firefox can be open at a time. "This issue is addressed in Mozillazine but nothing I've tried there seems to work. I started a new profile in the profile manager that gets at least upwards and the functioning, but strangely enough the Manager also told me the old (default) profile is still underway, although I can't find a way to close it. Also, I can't find the default profile in my Profile Manager. can anyone help?

  This has happened

  Just once or twice

  == I thought that I had left Firefox and he was new.

  I get the same problem from time to time. It is not a solution but I go into Task Manager (select by right clicking on an empty area of the start bar) and under the research process and, invariably, there is a 'hidden' version to use the FF. I selects & close via Task Manager and then am able to restart FF.

• I get the following error message when you try to install Windows Live Essentials for Windows 7-64-bit: __One installation files seems to be corrupted. HR:0 x 80070003

  I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
  One of the installation files seems to be corrupted. HR:0 x 80070003

  Hello Amawob,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  You cannot install some programs or updates.

  http://support.Microsoft.com/kb/822798

  Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  That should solve the problem for you.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• I get the error access path/file execution error ' 75 "you try to start a product.

  I get the error access path/file execution error ' 75 "you try to start a product. How will I know which file it is trying to access. Is there a log or something?

  Hello

  1. when exactly you get this error message?

  2 have you made any changes to the computer before the show?

  Please provide more information on the issue so that we can better help you.

  In the meantime, make the boot minimum troubleshooting and check if the problem persists.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note:

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Startand then click run.
  2. Type msconfig and click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
  4. When you are prompted, click restart to restart the computer.