You want the Narrator at the start

Similar Questions

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Whenever I try to login, I get: "you want the following program to make changes to this computer?

  A few days ago, I started getting the following message EVERY time I try to open a session:
  «You want the following program to make changes to this computer: it lists the FF and Mozilla Corp.»
  I have to click 'Yes' EVERY time, and then it seems my Comcast home page.
  I have a PC with Windows 7.

  In addition, when my home page appears, 3 small icons at the top right do not appear. (Minimize, X)

  A possible cause of this error is that Firefox is configured to run as administrator.
  Make sure that Firefox is not set to run as administrator.
  Right click on the desktop Firefox shortcut and choose "Properties".

  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  • Privilege level: "Run this program as Administrator" should not be selected
  • "Run this program in compatibility mode for:" must not be selected

  Also check the firefox.exe program properties in the program Firefox (C:\Program Files\Mozilla Firefox\) folder.

• ElliteBook 8460p will not be running when you press the Start button

  Hi Ant classmates.
  
  I am facing a problem with my 8460p ElliteBook. When I press the Start button it won't start and I need to apply some mechanical vibrarions so he reacts to the button. I guess that there is a problem with a connection inside. The thing is that he does not always fail, but it happens more often. I'm afraid to send it to HP support and resume with a message like "the problem didn't see the - up." I'm close to the date limit of warranty, but I need my laptop for 3 more weeks for professional issues. What should I do?
  
  Thank you

  Hello Angelica,.
  Welcome to the HP Forums.
  
  I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can click here for the link.
  http://h30499.www3.HP.com/hpeb/
  
  Thanks for posting on the HP Forums.

• My laptop sometimes "out of Short" when you press the Start button, what happens in the repair of this anomaly.

  I use a laptop Acer Aspire 4540 (32 bit).  The problem started when the optical drive DvD - CD started to not start consistantly, gradually, the group became hotter than normal. Finally, which would not start up. I tried to follow the advice given on... disconnect the battery and by holding down the start 30 seconds button. But, to no success in remeding the problem.   Can you provice me with any advice that could help me solve this problem.

  Thank you.  gdb

  Hello

  The computer probably has a hardware problem and you should contact a real computer store
  (who makes his own internal service and no leeks and displays a Best Buy or any other)
  Department stores) or system manufacturer support. You cannot fix the hardware with the software.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/AC/en/us/content/support

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can you change the starting sequences oh Hp 6735 b, how can you get the Bios?

  I tried to install another version of my windows vista interprise, I couldn't because I could not find how to boot from the CD/DVD?

  I started the computer, pushed F1 there is no way to get the starting sequences...

  I need help here

  Hello

  When you turn on the computer, you must quickly look at the bottom of the screen.

  It should tell you right there what key press to enter the Bios/Setup

  Here is the information from HP on how to enter the Bios/Setup.

  "The Boot order in the system BIOS Setup.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00364979&cc=us&destPage=document&LC=en&tmp_docname=c00364979

  The boot order configuration

  The boot order can be configured on the Advanced tab in the BIOS Setup menu. The procedure for changing the boot order may vary according to the model of the computer.
  

  NOTE: BIOS configurations vary depending on the computer. For more information on a specific computer, refer to the documentation provided with your computer or visit HP drivers and downloads page . The BIOS settings are usually listed in the Guide of Service and Maintenance.
  Follow the steps below to configure the order of boot on most computers.
  1. Turn on or restart the computer.
  2. While the display is clear, press the f10 key to enter in the settings menu of the BIOS.
     

     NOTE: the BIOS setting menu is accessible by pressing the "f2" or key f6 on some computers.

  3. Select the Advanced tab using the arrow keys left and right.
  4. Use top and down arrow keys to select the boot order .
  5. Follow the on-screen instructions to change the boot order.

  See you soon.

• When you click the Start button, the menu appears and then disappears a second later

  I continue to by clicking on the start menu and it pops up then a second later is disappears

  Right-click on the Start button, select Properties, click on the tab bar tasks, clear the checkbox to auto-hide the taskbar.

• Windows will ask you "Do you want the following program to make changes to this computer?" whenever I start Firefox.

  My shortcuts nor my firefox.exe have checked Run As Administrator. And yet, I get this message whenever I start Firefox on my new laptop computer with Windows 7 Professional 64 bit.

  Try to uninstall and reinstall Firefox and make sure to remove all the existing shortcuts (office).

  You can find the full version of the current Firefox 35.0.1 version in all languages and for all systems operating here:

  • https://www.Mozilla.org/en-us/Firefox/all/

• message from Archbishop HP setup says "Do You want the following prog. of unknow Publisher changes to the cpu

  the program is hpDST.exe, with an unknown Publisher, and the original file is the location of the hard drive program

  C: Program Files x 86/Hewlett Packard / SetupManager\hpDST.exe

  I saw other solutions for the similar problem, but do not know, they fit.

  Operating system is windows 7 32 bit

  Hello

  Thanks for posting in the HP Support forum.

  It's Windows user account control program step by step > > http://windows.microsoft.com/en-gb/windows/what-is-user-account-control#1TC=windows-7

  It happens because the program needs additional privileges to work and because it is not digitally signed (aka Windows cannot check the owner). This program seems to come from an HP, but it is not required for the operation of your computer. You can safely remove the exe in C:\programFiles (x 86) \Hewlett Packard\SetupManager\hpDST.exe

  You can go to control panel > > programs and features, find HP Support Assistant, or something with the name of the HP configuration manager and uninstall them.

  If the problem persists or you are unable to find the program, please let me know - there are more things that can be used.

• Do you want the screen was just a little more big?

  Try pressing the F11 key. It allows to switch between normal mode and mode full screen. Mode full-screen, move the cursor to the top to temporarily activate the upper band. F11 allows to enable / disable mode full-screen.

  This is when you use a Web browser?

  F11 works in Firefox and IE

• You want the LR 6 trial version non-cloud. How to install?

  Asked what app to associate it with. Not a clue.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14 | 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14 | 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• How do you use BER if the value that you want the user to enter is 0?

  I have several TEB on a slide, but the value of input from the user to one of the ETB must be 0.  If the user clicks on the button submit without entering any value in the TEB, which is equal to zero, it will mark it as correct. I tried to set the value of the variable of the ETB 1 and then in the conditional action that I when the variable of the ETB is 0 perform different actions, but I get the same result.  I use 8 Captivate.  Any help would be appreciated!

  Well, I thought that out, but just in case someone already has this problem I'll explain what I did.  I did a tip for the slide action on enter and set the variables TEB 1 requiring the user to enter 0.  So if the user clicks on submit without entering values, the TEBs equal 0 would be marked wrong.

• Do you want the 'sharingd' application to accept incoming network connections?

  This message just popped up. I have my 2 macs configured to share files. That's happened for a long time. So why this message now? Maybe nothing to do with sharing files. ???

  How to make your system preferences > Privacy & Security > Firewall settings with these:

  

  C.

• How to set the function key that you want to run at startup?

  Hello
  I have a problem until I realized that the special function working keys such as high brightness down
  but now, you must open the application feature keys to make it work. I tried the bios settings, but it wasn't the problem. I think the question is how can I get the program feature keys to run at startup.

  Also another problem, I noticed that my display setting is a bit. I tried calibration using the default windows application, but my only question is that when I get to the step of contrast, everything I do is brightness adjustment and nothing else is there another keyboard button on the device that I can use, rather than the keys of brightness, change contrast?

  Thanks I know I had a handful.

  I put t know which model of laptop and what OS you use and I assume that you are writing about the key features of FN and maps flash, right?

  By default, Toshiba flash cards must start with Windows and must be enabled in the boot options.
  If you want to check this option start run (Win + R key), put msconfig and click OK.
  When the configuration of the system is open, go to the Startup tab and check if there is a check mark before Toshiba Flash cards. If it isn't put there and confirm with OK.

  This problem with the display is really strange to me. If you use the right display driver everything should be OK and he didn't need a calibration or anything else.
  When you have bought this laptop and started to use it were there, everything is OK with the display? I think so.

  Your laptop factory settings or you use clean install of the OS?

• You want to contact Microsoft support team own the support the computer engineer.

  Original title: * address email is removed from the privacy *.

  I would like to have a phone number. Tobeable take someone on how my conputer is oprating etc. THANKS, RAY

  Hi Philippe,.

  Thanks for posting your query in Microsoft Community.

  I understand you want to contact Microsoft support team for technical support technician check your comptuer. If I'm wrong please let me know.

  You can contact Microsoft technical using these numbers:

  http://support.Microsoft.com/kb/319726

  If you want the help of the Microsoft Community, answer these questions.

  1. what exactly is the problem you are having?

  2. you receive error messages?

  3. What is the brand and model of the computer?

  You can view the following link to ask a question on the help forums.

  http://support.Microsoft.com/kb/555375