ThinkPad T440s plus Nvidia is no connection?

Similar Questions

• Upgrade from Thinkpad T440 14 "screen 1368 x 768 maximum resolution for an IPS 1920 x 1080. Is this possible?

  Hello.

  I would like to know if it is possible to upgrade my screen 1368 x 768 for a 1920 x 1080 IPS.
  My computer has an Intel vPro 4 GB RAM and Intel Graphics 4400 video driver.
  In addition, my laptop information:
  Product ID: 20B7003LBR
  Type: 20B 7
  Serial number: EP*

  For information purposes, I asked via email laptopscreen.com and they said two monitors possible on this link http://www.laptopscreen.com/i/index.php?page=products&part_number=LP140WF1 (SP) (J1)

  I would like to know if my hardware supports this type of screen.

  Thank you.

  Moderator Note: serial number removed for the protection of the Member.

  Hi Zahavandre,

  Welcome to Lenovo Community!

  The screen resolution maximum supported on ThinkPad T440 is 1600 x 900, below is the list of the FRU number that fits your system.

  • 04 x 3928 - Inolux 14.0 "HD + AG
  
  
  • 04 x 5023 - Inolux 14.0 "HD + AG Panel; Inolux N140FGE-ai2

  I hope this helps.

  Best regards

  Agnes Kumar

• ThinkPad T440s Fan questions

  My thinkpad t440s has long been a problem with the fan, it is not working properly, makes a noise and stops, the fan starts and stops at several recovery times and, at any time

  I am not sure the reason for this, but it happened after a night I let it run and the next day it just happened

  I would appreciate it if you could help me

  OK now I solve it
  Yesterday, I opened the computer and pushed the fan back down a bit, literally the fan blades, who arrested but he sounds, but now less than before
  Today what I did take a little lubricant all in one, and I did what you see in the video (https://www.youtube.com/watch?v=1lxvmay2tn0)
  This completely solves the problem and works well, and is no longer makes noise

  I think this could also work, if you do not know how to disassemble the fan
  https://www.YouTube.com/watch?v=Kiz3PoPmFK0

• New user meticulous Thinkpad T440S, coming from a Samsung NP 700

  Old NP 700 series. Beautiful samsung keyboard and touchpad: http://images.amazon.com/images/G/01/electronics/samsung/samsung-12q2bts-series7-15-keyboard-lg.jpg

  1. What is precdedence in power options: power of bios options (max perf / etc) vs vs lenovo power management vs intel power windows profiles?

  1. lenovo battery vs windows manager battery, no difference through studies, anyone
  has links to?

  2 AHCI mode check that out in my samsung Wizard software, but there is no option for it in the bios updated. I remember adding an on my old computer Windows registry hack, and maybe the Software Wizard reads a false positive. How will I know it's on? Can I enable it?

  3. What is the default resolution and icon size people use most in detail, but not too small of a screen to get eye strain? I find myself on the 1600 resolution, but I'd be lying, even on the IPS, that videos pretty grainy. Also how will I know if I have IPS (and still more AUG or LG)? I also have a resolution of 1920, this slab IPS ONLY? I'm just surprised how grainy looks like the resolution 1600 large icons.

  4. how the people they control clicks and control t tabs, I find myself with the command of right (right) and the left index finger to hit the 't,' Ctrl left click to open a link in a new tab appears difficult ladies compared to my Samsung. That is to say if I'm to bed and do not want to use two hands to open a new tab.

  5. turn on highlight of my PDF in my PDF MUCH drive to school. How can I drag the mouse much smoother to highlight. So a click + drag? This seems to be one of the movements a harder to do on the touchpad, smoothly, in one fell swoop.

  6. http://imgur.com/nfw29fr shortcuts tack in my bar tasks I want to do a right-click, IE shortcuts textpad or explore.
  easiest way to do this? I often find myself clicking the icon and opening a program when I try to click on two fingers. How can I avoid this and do a right click on the shortcut to the taskbar for lancer.xls/.doc recent/pin?

  7. all good tutorial in the most effective way to use the provision of thinkpad?

  8. I heard a slight 'waterfall' empty sound randomly, when I turn on the sound using my trackpad. Initially, I thought it was the fan after unpacking, but it's the speaker! It occurs during the bios too. I guess that this is related to the material, how do I fix this? Or is - this driver associated with

  9. the refurb I bought has a year warranty, but when entering the series it shows "extended warranty" for more than three years. Is my warranty 4 years or 1?

  10. I'm not a fan of proprietary software on my computer. I uninstalled the Lenovo power management. I'm not sure what app helps all f8 keys from work (that is to say the keyboard backlight of work on space, but what about wifi on). More about Lenovo update application would allow this?

  10. where is the function key in the contextual menu access? where is the stop scroll, at all? Again, I would not the good app installed for these

  11. I am aware that each keyboard is different and intuitive to himself. But one thing that I hate the lenovo's top page down in bottom right. This is the schematic the only Ko I know where PG up and down arne't right. It's me strian my wrist/elbow my woman in bed to pull down low. A way to remedy this situation?

  12 is the welded CPU in? I can be upgraded in the future to an i7? I guess, right me if I'm wrong, welded in Council means that no upgrade is possible.
  Enjoy the friends for help.

  1 IIRC Lenovo > Windows > BIOS. I am not sure about that.
  1a. If you are running Windows 7, use ThinkVantage Power Manager. If this is not the case, the regular windows you will do fine.

  2 T440s is AHCI.

  3. you're probably better off using native resolution with the DPI scaling, unless you have software that don't play well with scaling of IPR.

  (4. my personal solution for this is to connect certain keys in your browser: i.e.) F1 = new tab, F2 = Previous Tab, next tab = F3, F4 = close the tab.

  5. Configuring entire clickpad on this generation is poor. Try the tap and drag without actually clicking on the touchpad.

  6 see #5. Try to hit the bottom right area; It can be marked as right-click.

  7. don't know what you mean by that.

  8. I have not heard of this before. It disappears if you cut the speakers? May need to call the warranty for this one.

  9 call and ask.

  10. you are looking for the driver for power management, as well as the package Hotkeys integrations of access keys. Power Manager itself is unrelated to shortcut keys.
  10. These are funny key combinations now. Menu shortcut is SHIFT + F10 and Scroll Lock is Fn + S, I think.

  11. you can remap the keys with AutoHotkey. Unfortunately, I can not think of spare keys suitable on keyboard layout 6 rows.

  12. Yes, the CPU is soldered. In principle, you can unsolder the CPU and resolder a new, but it's a lot of work and risk. You could buy a card mother i7 and swap motherboards.

• A way to send and receive the SMS messages on ThinkPad T440 with Sierra EM7345

  I have a T440 with Sierra LTE. It works fine to connect to mobile networks.

  But here in New Zealand, one of our suppliers also provides free wifi hotspots to customers on certain plans. To use this property, I have to enter a password which is sent to me by SMS.

  Is it possible that I can display SMS messages sent to the SIM card inside my laptop?

  Now, I need to remove the SIM card from my ThinkPad (with all the hassles that implies), paste it into my phone, get the password, then transfer the SIM card in my ThinkPad (and often do not, it is y no food taken located nearby, so I can't restart because I had to disable the internal battery during the installation/uninstallation of the SIM card).

  So, if someone can point to a way I can just see these SMS messages on my ThinkPad, I'm grateful enernally.

  
  

• ThinkPad T440s - updating windows 10

  I have a T440s that has been upgraded to windows 10 about 6 months ago. After you have installed a new brother printer yesterday, the machine unbootable. It goes just to repair auto, then diagnosis, nor necessary. I tried several system restore points, but sr always fails saying it cannot copy the registry.

  I ran the diagnostics of lenovo equipment that breaks down in the reading test targeted the HDD with bad sectors. I backup all the data (which is on the SSD drive?) manually from the command prompt cli (which still works) before doing anything else. next planned step is to run the bad sectors). I wonder if bad sectors are where the registry (or its backup) is stored, and if so, then 'fix' the bad sectors will destroy the registry up to the point where I have to do a refresh.

  This is the first time that I am dealing with a system with a drive hybrid ssd (for startup & os hd for storage. given that it was originally a machine 8.1 will be running the windows update back 10 windows, and if so, he'll know where to write the files of bone regenerated to the ssd and hd?)

  Edit * I forgot to mention that the s.m.a.r.t said diagnostics portion the drive is fine. ***

  any suggestions appreciated.

  I do not know what causes these things, but ultimately, I decided (since I had a full backup of the data) run the bad sector thinkpad. He fixed the bad sectors, managed to recover enough of what was stored there so I could run the system restore, and now the phone works again.

  who knows?

• HP PHOTOSMART PLUS B209a-m: HP Photosmart Plus B209a-m "not connected printer.

  
  

  Hi @PrincessPP,

  Welcome to the HP Forums!

  I see that you can not connect your HP Photosmart Plus B209 computer Mac OS X 10.10. I'm sorry to hear that, but I'm happy to help you!

  Please take a look through this printer is offline guide, "Printer is off-line" Message appears on the computer and the printer does not print: Mac OS X. Follow the instructions for Mac OS X 10.9 as they will work on Mac OS X 10.10.

  Hope this helps you with your current situation and have a great day!

• ThinkPad Edge E15 302 - 45U wireless connection problem

  I had to do a fresh install of windows 7 Professional.  Everything works apart from the wireless connection.  I downloaded every driver wireless and the problem still persists.  I can see the connection being broadcast, by entering the password to connect, I get only "windows could not connect to xxx".

  I can connect to this point my phone wireless and my other laptop is no one else in the office having this problem.  I'm having the problem only on this Thinkpad.

  If I try to use Intel PROSet/Wireless diagnostics tools I get a FAILURE-Wireless equipment is not related to the transport driver.  I tried all that at this point with no luck.  LAN works of course but I need the wireless to work.

  Thank you

  Nevermind I managed to solve the problem by creating another profile.  Log on to the new wireless profile works great.

• Seagate Plus backup does not connect

  I have two backup Seagate Plus external hard drives that won't connect to Windows 7 x 64 in Fusion 5.0.3. I think that it worked in Windows 8, but I deleted the virtual machine to decommission 7. Ouch!

  The device "drive_name (backup Seagate RSS + BK)" could not connect to its ideal host controller.

  Running on MacBook Air 2012 mode in "USB 2.0". Any ideas?

  -Ivar

  The only solution is to force the Protocol to USB 2.0 via a hub.  This is a known issue.

  FWIW, USB 3.0 has a lot of questions on Mac, so merging is probably as combat Apple bugs.

• Do not charge the external battery ThinkPad T440

  Hello community,

  I use a T440 with WIN8.1 machine pro, but for some reason any external battery stopped charging. This laptop is only 3 months old Lenove send me a brand new, but the result was the same, the charging symbol appears on my screen when restarting the machine and shrotly after completely stops. Now, I had my internal battery pack has changed and once again, no improvement. If any of you had a similar experience and can suggest a remedy?

  just had an IBM engineer on the site and that they have was change the motherboard of the laptop. Frankly, nobody seems to know how or why the machine won't start. Since the new motherboard was installed everything seems to be in order and work very well.

• OfficeJet Pro 8600 Plus: loss of wireless connection, printer does not accept the password wireless

  My printer has suddenly lost its wifi connection. It's the only phone connected to my network to do so.

  Through the Wireless Setup Wizard to restore the connection. Assistant tells me that I entered an invalid password wireless, that is not true. (I confirmed that all devices connected to the network using the same password).

  Reset the router (Technicolor of Time Warner). Reset the printer. The 'Restore default network' done. No luck.

  Zero has changed since yesterday, when my printer was working fine. I used the same router for months, do not change any settings. Any thoughts on what may be the issue? A bad update happen?

  Thanks in advance.

  My apologies for the late reply. I managed to get this problem resolved by phone to customer service.

  The security mode of the router had to be changed to 64 WEP for wireless connection to be restored. According to Support HP, it's a common problem with the routers in Technicolor. There was no explanation as to why the printer has suddenly lost the ability to connect wirelessly when safety was created to WPA2-PSK. The network has been configured this way for more than a year.

  I have almost solved this problem on mine (I had read about changing of security in a different post), but ran into a hiccup because of Safari. For some reason, Safari prohibited access to a menu page for my router security settings. You can imagine how boring it is to look at the HP Support use Firefox to access the router and do what a mouse click more, and then I had to make the change. So, if you make this change, be sure not to use Safari to access the gateway of the router Technicolor. Use Chrome or Firefox.

• HP Officejet Pro 8600 Plus: scanner does not connect

  Help, please.  I have plugged in any place and unplugged, reset several times.  I keep getting this same error msg.

  The printer works fine but the scanner won't.

  Error Msg:

  Unable to connect to Debra PC/Scan docs.  Make sure that the remote computer is turned on.

  Hello

  Glad to know that the problem has been resolved.

  Marking this post as a solution it will be easy for others to see you the message easily.

• HP Photosmart Plus B210e can't connect Wifi

  I've used this printer for a few years already. 2 days ago I went looking for 1 new store ink and now after I replaced it, it continues to display an error message: 0005FBB6. And after I gave it to the repair shop and it returned to normal. I have cleanned all printer heads and other parts also.

  So now, when I turn on wifi, it will display the message flashing all the signs when it connects to the wifi. And the display shows: Please switch off and restart the printer. After that I restarted, if I disable wifi before, it connects it. It goes back to normal.

  Today I went to the store with the printer again. And I did know that the printer works well with the other wifi. So, it seems like not my network for some reason any. What should I do now?

  Today I tried to reset the router. And I put brand new router. The printer started working now. It seems so it is the configuration of the router doesn't work is not a reason any.

• Line ThinkPad T440 yellow on the screen

  Hello

  I bought the laptop online and there is a vertical yellow we line screen. While searching the Internet for a fix that I noticed that the laptop is still under warranty.

  Who should I contact to have this problem, I'm in South Africa

  Hello and welcome,

  I think that this phone number would be a good start:

• Defaults to 'Plus per Frame Info' connect Renders

  I like micromange everything in my life - including my AE logs.  But when I say AE in the journal more 'by info frame"once, he does very well, but like my employees, I have to tell him to do the same thing every time.  Is it possible to have default AE at this setting so in case I forgot to click on?

  This is particularly useful when you render agriculture (made several computers).  I like to see the computer on which is released so I can it give lectures in the morning.

  Nope. Unfortunately, it is information that is not sticky, because it is not stored anywhere in a preset or setting. You could probably create a pre-rendered script to check and set the option automatically...

  Mylenium