You will need to change based on values in another article LOV...

Similar Questions

• Wvc80n. you will need to change the default ip address?

  My network is 192.168.15.xx

  I know that different default values from the camera to a range of ip addresses. Given that I don't see on the net how to configure it? I used a laptop with a cat 5 with a static ip address range to match the cam but nothing

  THX

  Connect the camera with the Ethernet cable to the Ethernet port on your router.

  Press and hold the reset on WVC80N for 30 seconds.

  Power cycle the camera and the router.

  Open your router configuration page and you will find the IP camera under the table of the DHCP Client.

  As this camera picture automatically takes the IP address of the router.

• You will need to change the password of DBSNMP - what targets.xml?

  Hi all
  
  
  
  We currently have a box of Solaris (sunOS 5.9) acting that has CMS (10.2.0.3) and a repository DB (10.2.0.2) installed on it, as well as the Agent (10.2.0.3).
  
  
  
  He has about 6 target pointing to it (varying in DB level of 10.1 to 10.2). As part of a security audit, we put in place a new password policy, which means changing the dbsnmp < strong > < facilities > password on all databases. Of course, this will affect the GC configuration.
  
  
  
  I know I need to change the targets.xml file but I have the following question:
  
  
  
  on each target, should I put the password for the user dbsnmp on the local target database or the password for the user dbsnmp on the database repository?
  
  
  
  Also, in Chapter 10, point < em > < /em > 2.7.2.1 of the ' 10.2.0.3 Enterprise Manager Advanced Configuration guide "he says that I can just go in GC, chose my database target, < strong > configure < facilities >, enter new password password < strong > monitor < facilities > field, test and submit. Is this just the way of targets.xml edition GUI?
  
  
  
  Thanks in advance,
  
  
  
  Ric.

  Use the emcli to update all the dbsnmp password to only one

  http://download.Oracle.com/docs/CD/B19306_01/EM.102/b40004/cli_verb_ref.htm
  refer. / emcli update_password

• You will need to change the permissions for the camera application.

  Original title - fresh paint App - settings

  I was testing the waters and accidentally leave refused to use the camera to the computer.   Now, when I click on the camera, it says

  "This application requires permissions to use your camera.

  "You can change this in the settings of the application.

  HOW DO THE APP SETTINGS?   :}

  Hello

  Thanks for posting your query on the Microsoft Community. I understand that you need help to change the permission to use your camera application. I will certainly help you in this matter.

  Method 1:

  Open the camera app, and then follow the steps mentioned below:

  1. Press Windows + C keys on your keyboard to open the bar of charms.
  2. Click the settings option.
  3. Select permissions .
  4. Turn on allow this application to access to your: Webcam and Microphone option.
  5. Close the camera application by pressing Alt + F4.
  6. Take control of the camera application if the application works.

  Method 2:

  If the problem persists please try to troubleshoot the app Windows 8 Apps troubleshooting to diagnose and fix the problem. Please click on link below to run the Troubleshooter:

  http://go.Microsoft.com/fwlink/p/?LinkId=268423

  See also below article for more information:

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

  Thank you.

• HELP ME PLEASE! You will need to change the settings in English!

  How can I change the language to English? I acciedently put aribic and can not read!

  In the main program of Skype window menu. Click on the second item of the right menu, then the second menu option down.

  About me You can also use an IP camera that your camera for Skype videoExample Instructions

• You will need to restore from Windows XP to another computer. It seeks for *.bkf file

  Original title: I did a partial file backup using backup/restore XP. and I'm trying to restore these files to another XP computer but I do not have the *.bkf file she asks. How to restore these files?

  I did a partial file backup using backup/restore XP. My hard drive was damaged by a power surge. I am now trying to restore these files to another XP computer but restore not read cd? I do not have the *.bkf file she asks. How to restore these files?

  I have several cd with backup files, but I can't access either one of them.

  for none of them, he asks that *.bkf that the cd do not appear.

  Hello

  Are you able to browse the disc and see the files after you insert the disc in the drive?

  (a) Insert the CD in the computer.

  (b) double click on computer and select the CD/DVD drive.

  If you are able to see the files, you can copy and paste the files.

  If you can't see the files, then there is no other options left to fix the problem.

• Siri keeps saying "I don't see an app for that.  You will need to download one. »

  I just installed Sierra and tried to use Siri.  I can't open any app on my Mac.  No matter when I say something like, "FaceTime open" or "Open Pages," Siri comes back with something like "I don't see an app for that.  "You will need to download a ' or 'you don't seem to have an app called 'Pages'.  We could see if the App Store has it. »

  Hmmm... This is not sensible.

  You need to speak clearly. I had the same thing happen. It took a few tries but Siri has finally opened apps for me.

  Practice support

• You will need to check on a PC with WinXP OpSys PUP. Could DO with Win98 and earlier versions. HOW can I make WinXP let me control BACK Pup?

  You will need to check on a PC with WinXP OpSys PUP.  Could DO with Win98 and earlier versions.  HOW can I make WinXP let me control BACK PUP?   Acquired CNC machines controlled by PRE - Win.XP PC works fine.  But Win.XP prevents the PUPPY control via simple BACK and GWBASIC.   You want to be able to start/stop all 8 bits of data PUP with BASE and BACK.

  Thank you.   Jan Rowland

  Hey Jan Rowland,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited in the Windows XP Pro on the Technet Forums.

  Post your query in Technet Windows XP IT Pro Forums for assistance on this issue.

• you will need to merge with (same drive) c: drive d: drive.

  c: drive is full

  Unless you want to do a clean install of Windows (do your partitioning during installation), you will need partitioning software third party to do so. I usually use Acronis Disk Director, but there are others. MS - MVP - Elephant Boy computers - don't panic!

• You will need to connect the battery, but lapptop now sign showing that the battery is not connected, so does not load.

  You will need to connect the battery. until recently, all ok.  never use the laptop as a mobile, always on the wireless, but lapptop shows now sign that the battery is not connected so does not load.

  I have a laptop which, so far, is always connected wireless when it is in use. I want to take a vacation, and notice a signal arrives that the battery is not connected and therefore does not load.  This has happened recently, although the battery never showed a 100% charge. can someone tell me how to connect the battery please.

  Check that the battery is correctly installed. If it is then the problem is that the battery is exhausted, so you should buy a new battery.

• This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system (Code 12)

  Guys, I have a problem. So, my laptop has 2 graphics cards, an integrated course of the Intel HD graphics (which works perfectly) and the other being the dedicated Nvidia graphics (Nvidia GeForce 940 m). Until 2 days ago, everything was going well and running.

  I have the application experience GeForce and it prompted me that there is a new driver update should I download. He started to install then after rebooting to complete the installation, it failed. I checked my device manager and saw a yellow exclamation under under my Nvidia graphics card (remember, my laptop has two graphics cards: Nvidia graphics card and Intel HD graphics that works correctly). I immediately checked the details, and he said:

  "This device cannot find enough free resources that it can use. (Code 12) »

  "If you want to use this device, you will need to disable one of the other devices on this system."

  This seemed very strange, because it was LITERALLY working properly before I was invited about update driver I got, so I don't know what to do - as a matter of fact, literally, I finished this game, Deadpool, with my Nvidia card that I put as the default graphics card, a few hours before , so I don't know why this happened. Any help? I'm looking for a logical answer to this, guys!

  Additional information:

  A few days before this happened, I went to my store local pc and installed an extra 4 gigs of ram on my 4 existing to make 8. Don't know if it's useful, but anyway

  If I pick up my laptop and shake it side by side, I hear a slight rattling noise, and it seems a little loose (I found this out after seeing the error message). The noise seems to come from just below the middle of my keyboard (I'm using a laptop). If for some reason, my Nvidia card is loose? Is this possible?

  I am quite technologically inclined, but not to the extent of removing components and reconstruction cell phones / pc and access the bios and what not. I can only remove/add ram.

  I want to know if its something I am able to fix it because I do not necessarily want to go running and sending my laptop places - only my pc up shop.

  Here is the location of my Nvidia card: PCI Slot 4 (PCI bus 4, device 0, function 0)

  My specs:

  Acer TravelMate p257-MG

  Windows 7 business

  Intel core i5-5200u 2.20 GHz 2.20 Ghz processor

  8.00 GB of ram

  64-bit operating system

  1 t hard drive

  940 m Intel HD graphics 5500 & Nvidia Geforce card

  Just to recap, I get the error on my Nvidia graphics card code, "this device cannot find enough free resources that it can use. (Code 12) ""If you want to use this device, you will need to disable one of the other devices on this system. »

  Thanks in advance!

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you run ' Intel Chipset Software Installation Utility ' and check.
  Reference:
  http://www.Intel.com/content/www/us/en/support/software/Chipset-Software/Intel-chipset-software-installation-utility.html

  Please keep us updated.

  Thank you

• You will need administrator permission.

  This error has become a nightmare for me. I've been struggling with almost a week now.

  I am trying to copy file from my hard drive on my new laptop (windows 7, dell 14z). Some files are throwing error, you will need administrator permission to copy this file, in spite, I logged in as an administrator.
  I gave all the tests with the evolution of the property, all permissions, removing UAC all... no help at all.... PLEASE suggest something.
  SARA

  This occurs because the files on your desk belong to a user that is different from the user of the laptop (or different passwords). In asserting the admin rights every time, you tell Windows that you don't care about file property. There are two ways to solve the problem:

  • Use the same account & password on the laptop that you use on the desktop.
  • Take ownership of files and folders: http://social.answers.microsoft.com/Forums/en-US/w7network/thread/24bdf172-2dbc-43b8-995d-a99b6a81413c/

  If it does not, then it is likely that your files are encrypted. You must decrypt before copying them.

• You will need to reverse the left and right audio channels, because I would like to avoid too cables around the living room and the right sound.

  You will need to reverse the left and right audio channels, because I would like to avoid too cables around the living room and the right sound.

  tried in SOUND > Speakers > CONFIGURE it on by clicking on the right left speaker sound time and vice versa.

  Hey DiegoWO,

  There is not currently an option within the OS to achieve.
  However, your drivers audio pourrait have a built-in effect that allows you to reverse the stereo sound. If you do not see a separate application to manage your sound, you will need to visit the website of the manufacturer of your sound card and install the latest drivers.

• You will need to get an older date?

  HI: SQL and PL/SQL

  I have a table like this. You will need to get more old datetime for each metricno. Need help

  METRICNO	TDATE	SUWIMON
  11	09:13:14 10/01/2014	1200.00
  11	09:13:23 10/01/2014	100.00
  11	18:47:01 10/02/2014	10000.00
  12	10/01/2014-18:47:17	1100.00
  12	21:59:58 10/01/2014	2000.00
  12	10/03/2014 22:00:13	10000.00
  13	10/07/2014 22:01:28	500.00
  13	10/08/2014-22:03:08	1100.00

  Output

  METRICNO	TDATE	TRANSFER_AMOUNT
  11	09:13:14 10/01/2014	1200.00
  12	10/01/2014-18:47:17	1100.00
  13	10/07/2014 22:01:28	500.00

  Thank you/Tequila

  with

  a_table as

  (select 11 metricno, adate to_date('1/10/2014 9:13:14 AM','dd/mm/yyyy hh:mi:ss AM'), 1200.00 suwimon Union double all the)

  Select 11, to_date('1/10/2014 9:13:23 AM','dd/mm/yyyy hh:mi:ss AM'), 100.00 Union double all the

  Select 11, to_date('2/10/2014 6:47:01 PM','dd/mm/yyyy hh:mi:ss AM'), 10000.00 Union double all the

  Order 12, to_date('1/10/2014 6:47:17 PM','dd/mm/yyyy hh:mi:ss AM'), 1100.00 Union double all the

  Order 12, to_date('1/10/2014 9:59:58 PM','dd/mm/yyyy hh:mi:ss AM'), 2000.00 Union double all the

  Order 12, to_date('3/10/2014 10:00:13 PM','dd/mm/yyyy hh:mi:ss AM'), 10000.00 Union double all the

  Select 13, to_date('7/10/2014 10:01:28 PM','dd/mm/yyyy hh:mi:ss AM'), 500.00 per union double all the

  Select 13, to_date('8/10/2014 10:03:08 PM','dd/mm/yyyy hh:mi:ss AM'), double 1100.00

  )

  Select metricno, adate, suwimon

  of (metricno, adate, suwimon, rank (select) over (partition by order metricno by tdate) rnk

  of a_table

  )

  where rnk = 1

  METRICNO	TDATE	TAMOUNT
  11	01/10/2014	1200
  12	01/10/2014	1100
  13	07/10/2014	500

  Just to provide your data in the case of other ideas arise

  Concerning

  Etbin

• You will need to download and install on my new computer the Adobe Acrobat XI Pro student and Teacher Edition. How can I download it?

  You will need to download and install on my new computer the Adobe Acrobat XI Pro student and Teacher Edition. How can I download it?

  kglad links in response to #1 here can help https://forums.adobe.com/thread/2017859