You will need to restore from Windows XP to another computer. It seeks for *.bkf file

Similar Questions

• You will need to download and install on my new computer the Adobe Acrobat XI Pro student and Teacher Edition. How can I download it?

  You will need to download and install on my new computer the Adobe Acrobat XI Pro student and Teacher Edition. How can I download it?

  kglad links in response to #1 here can help https://forums.adobe.com/thread/2017859

• You will need to re - install windows xp home edition after hardware failure.

  Hello

  I have an old e-machines computer desk (T1842) I bought nine years ago. It comes preinstalled with microsoft windows xp home edition, there is little time, we had a power surge in our House because of an act of God. I didn't throw this computer, so I bought a new power supply and a new motherboard for my computer running again. This is where my problem occurs, the hard drive on this computer became corrupt, and I have to re - install the operating system on it. The only software that has been arranged for me at time of purchase was a two disc set of what e machines calls "recovery disc". I tried to use these disk to get my computer running again, but there seems to be a hardware conflict now because I had to replace the motherboard, etc... What can I do to get my computer working again, of course, I still have the certificate of authenticity of microsoft / label the product key provided on the back of my computer at the time of the purchase, but the product key does not seem to help me solve this problem. I do not want to get my computer working again, it would be nice if I could get a new disk of software that would be compatible with this new motherboard, etc.. Can someone help me please?

  Thank you

  David

  FWIW... The motherboard came with a driver disk? If you use the recovery disk, I don't think you will be able to re - install windows from scratch. Even if you could you would have problems with the product key code, since the code you have is registered to the old mobo. You can click on the link below and follow the instructions to create a Utlity Cd, allowing you to recover your data on the hard drive. It is also full other little tools that will be useful.

  http://www.repairbotsonline.com/tools-and-software-section-F13/best-boot-disk-to-repair-restore-Windows-CD-T192.htm

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• You will need to re - install Windows 7. Product key my PC-related

  Hello

  I kept getting the message that my copy of windows was not authentic and my laptop was super slow. I had my dperatment IT look, they advised that I need to reinstall windows. They could not install the version of work as it was Windows 7 Professional and my laptop has the product key for Home Premium are entrusted to him.

  How can I get a disc of Windows 7 Home premium without paying the full price that I already have a product key? Download the software?

  Any help is greatly appreciated :)

  Hello Sheroola,

  If your laptop did not come with recovery disks, then the PC manufacturer will install the image on a partition of your hard drive. Check the Web sites of manufacturers of PC help section to "restore PC back to factory conditions." This should show you how to restore your PC to the back. Make sure that you backup all the necessary files on a DVD before restoring as you will lose all these files and other applications that you have installed since you bought your laptop. You will also need to reinstall all the software that you have personally installed on your laptop, so I hope that you have the installation for those files.

  Alternatively, the PC manufacturer can provide you with some time with the recovery discs, but they charge for those.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-

• You will need to download a CS5 license to new computer. Old computer isn't available (crashed). Non-responsive support chat

  What is the best way to proceed?

  If you are in a hurry to use the software... If you have only installed it once before allowing you to have two facilities enabled, then you should be able to wortk with the new download files immediately.  If/when get you your hands on people chat they will disable everything that is currently enabled, so you would need to activate the new installation after that.  But there is no urgency to get the old installation disabled unless you must have two installations of work immediately.

  The chat feature is apparently a game of chance... works well for some but not for others.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• copy contacts from windows 7 on another computer with xp

  Have a desktop with windows 7 and a laptop with xp. I want to copy my contacts from windows 7 and install it on the laptop. No help on the backup?

  Well I got lucky. While I was doing a manual update for microsoft security essentials I have windows live. no more outlook express. Thanks for help VLE.

• You will need to restore older registry. Cannot install IE access after a software

  I installed a software.  Since that time, I have not been able to access my wireless network (internet Explorer).  The only thing I can think of is to restore older registry from a time before the software was installed.  Where can I get directions for this?  This is for Windows Vista installed on a laptop.  Thank you

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• You will need to get Win XP SP3 on my computer as soon as POSSIBLE!

  When I try to run updates of windows I get this: "window updates web page cannot be displayed". I had to reinstall windows xp due to virus, so I'm under SP2. Automatic Updates does not work or the other. Can someone help me?

  Hello

  Install SP3 by downloading and running from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  You can ignore the text which says that it is for network installations and also ignore the text informing Windows/Microsoft Update If a single update of a PC.

  So try and get up-to-date with the Windows updates.

  Tricky

• You will need to change based on values in another article LOV...

  Hi all
  
  I got a mudbrick THAT LOV based on a value in another column. Let me explain... Assume that A value in the column is A1 then column B should show A11, A12, A13 and if column A is the value C cloumn B should show C11, C12... etc. The LOV will be static with some pre defined values. So all the LOVs will be defined in the forms. We just need to show based on the value in column A.
  
  Please suggest.
  
  Thank you.
  
  Published by: Amit1cs on April 18, 2013 19:40

  Amit1cs wrote:
  Hi all

  I got a mudbrick THAT LOV based on a value in another column. Let me explain... Assume that A value in the column is A1 then column B should show A11, A12, A13 and if column A is the value C cloumn B should show C11, C12... etc. The LOV will be static with some pre defined values. So all the LOVs will be defined in the forms. We just need to show based on the value in column A.

  Please suggest.

  Hello Amit,
  Up to now, I understand, you can create several record group for a single LOV. before you display the lov just to change or assign the appropriate record group. You can use pre-text-element column B trigger and set the record group to your LOV.

  Hope this helps

  Hamid

• This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system (Code 12)

  Guys, I have a problem. So, my laptop has 2 graphics cards, an integrated course of the Intel HD graphics (which works perfectly) and the other being the dedicated Nvidia graphics (Nvidia GeForce 940 m). Until 2 days ago, everything was going well and running.

  I have the application experience GeForce and it prompted me that there is a new driver update should I download. He started to install then after rebooting to complete the installation, it failed. I checked my device manager and saw a yellow exclamation under under my Nvidia graphics card (remember, my laptop has two graphics cards: Nvidia graphics card and Intel HD graphics that works correctly). I immediately checked the details, and he said:

  "This device cannot find enough free resources that it can use. (Code 12) »

  "If you want to use this device, you will need to disable one of the other devices on this system."

  This seemed very strange, because it was LITERALLY working properly before I was invited about update driver I got, so I don't know what to do - as a matter of fact, literally, I finished this game, Deadpool, with my Nvidia card that I put as the default graphics card, a few hours before , so I don't know why this happened. Any help? I'm looking for a logical answer to this, guys!

  Additional information:

  A few days before this happened, I went to my store local pc and installed an extra 4 gigs of ram on my 4 existing to make 8. Don't know if it's useful, but anyway

  If I pick up my laptop and shake it side by side, I hear a slight rattling noise, and it seems a little loose (I found this out after seeing the error message). The noise seems to come from just below the middle of my keyboard (I'm using a laptop). If for some reason, my Nvidia card is loose? Is this possible?

  I am quite technologically inclined, but not to the extent of removing components and reconstruction cell phones / pc and access the bios and what not. I can only remove/add ram.

  I want to know if its something I am able to fix it because I do not necessarily want to go running and sending my laptop places - only my pc up shop.

  Here is the location of my Nvidia card: PCI Slot 4 (PCI bus 4, device 0, function 0)

  My specs:

  Acer TravelMate p257-MG

  Windows 7 business

  Intel core i5-5200u 2.20 GHz 2.20 Ghz processor

  8.00 GB of ram

  64-bit operating system

  1 t hard drive

  940 m Intel HD graphics 5500 & Nvidia Geforce card

  Just to recap, I get the error on my Nvidia graphics card code, "this device cannot find enough free resources that it can use. (Code 12) ""If you want to use this device, you will need to disable one of the other devices on this system. »

  Thanks in advance!

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you run ' Intel Chipset Software Installation Utility ' and check.
  Reference:
  http://www.Intel.com/content/www/us/en/support/software/Chipset-Software/Intel-chipset-software-installation-utility.html

  Please keep us updated.

  Thank you

• You will need administrator permission.

  This error has become a nightmare for me. I've been struggling with almost a week now.

  I am trying to copy file from my hard drive on my new laptop (windows 7, dell 14z). Some files are throwing error, you will need administrator permission to copy this file, in spite, I logged in as an administrator.
  I gave all the tests with the evolution of the property, all permissions, removing UAC all... no help at all.... PLEASE suggest something.
  SARA

  This occurs because the files on your desk belong to a user that is different from the user of the laptop (or different passwords). In asserting the admin rights every time, you tell Windows that you don't care about file property. There are two ways to solve the problem:

  • Use the same account & password on the laptop that you use on the desktop.
  • Take ownership of files and folders: http://social.answers.microsoft.com/Forums/en-US/w7network/thread/24bdf172-2dbc-43b8-995d-a99b6a81413c/

  If it does not, then it is likely that your files are encrypted. You must decrypt before copying them.

• You will need to check on a PC with WinXP OpSys PUP. Could DO with Win98 and earlier versions. HOW can I make WinXP let me control BACK Pup?

  You will need to check on a PC with WinXP OpSys PUP.  Could DO with Win98 and earlier versions.  HOW can I make WinXP let me control BACK PUP?   Acquired CNC machines controlled by PRE - Win.XP PC works fine.  But Win.XP prevents the PUPPY control via simple BACK and GWBASIC.   You want to be able to start/stop all 8 bits of data PUP with BASE and BACK.

  Thank you.   Jan Rowland

  Hey Jan Rowland,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited in the Windows XP Pro on the Technet Forums.

  Post your query in Technet Windows XP IT Pro Forums for assistance on this issue.

• you will need to merge with (same drive) c: drive d: drive.

  c: drive is full

  Unless you want to do a clean install of Windows (do your partitioning during installation), you will need partitioning software third party to do so. I usually use Acronis Disk Director, but there are others. MS - MVP - Elephant Boy computers - don't panic!

• Error 0 x 80280008 occurs when you try to install updates from Windows Live 2011 on my computer.

  0 80280008 error occurs when you try to install updates from Windows Live 2011 on my computer. He tells me that I already have the flavor of different construction of Windows Live. He tells me that if I want to install this version, I need to uninstall the version currently installed on my computer. I don't want this new version, or is my current version very well? How to uninstall version current/how know what my current version?

  You can find support for the installation/uninstall/upgrade Windows Live Essentials in this forum: http://answers.microsoft.com/en-us/windowslive/forum/wlinstall

  Tip: Windows Live Essentials, not Windows Update, not prompt you to upgrade (update) to Windows Live Essentials 2011 QFE3 (v15.4.3555.0308).

  The upgrade is mandatory since mid 2012. See http://answers.microsoft.com/en-us/windowslive/forum/messenger-wlinstall/mandatory-update-to-windows-live-essentials-is-now/0816b1b7-71ff-44f7-8d74-52505bbbf290?page=32#LastReply

• Windows media player-Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings.

  I bougth Windows 7 starter, after the installation, I am unable to read the CD/DVD with media player. These messages continue to flow whenever I have CD/DVD slot...

  "Windows Media Player cannot play DVD video. You may need to adjust your Windows display settings. Open display in Control Panel settings, then trylower your screen resolution and color quality settings"I've adjusted manually, no solution, I had use microsolt auto FIX no way." Please help.

  Windows 7 Starter Edition or Basic... does not include a DVD decoder.

  As you can see in the following article... MS recommends
  upgrade to Windows 7 Home Premium, Ultimate or business.
  More features for you... more money for them...

  Info about DVD decoders: Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  It is possible that one of the following freeware
  media players would play your DVD:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.videolan.org/

  GOM Media Player
  http://download.CNET.com/GOM-media-player/3000-13632_4-10551786.HTML?tag=mncol;2

  Good luck...