Your pc has problems and needs to be restarted.

Similar Questions

• Windows 8 hangs and displays your pc encountered a problem and needs to be restarted!

  Hello

  I have 2 GB of ram on my pc and suddenly destroyed a half GB of ram and now I have 1.5 GB

  and since I was 1 .5Go ram my pc crashes after 15 to 20 minutes and showing the blue screen and restart

  whenever I use every 2-3 applications at the same time (or) a single application for a long time, it hangs and displays the blue screen and restart!

  I have seen that windows 8 shows the minimum ram is 1 GB and windows 8 running on my pc of a friend with only 1 GB with any errors!

  Help, please!

  These are the programs installed on my pc
  

  and this is using memory for all the 1 sec approximately

  

  and it's my system properties

  

  and I forgot to say that
  all the browsers that I use (chrome, mozilla firefox, opera, safari etc...) including accidents to internet explore in the Middle
  screenshots of all browsers:
  

  I do not use these all browsers at the same time and they are all not installed in my pc except firefox and internet explore... im showing the crash of the reports that i faced problems with these!

  Please help thanks!

  I recommend that you set all your disks managed system size rather than nothing. It uses light memory of your orders.  I use the optimizer application called memory wise wisecleaner.com to hold my smooth ram.

• "Receive the error message" your PC has encountered a problem and needs to restart.

  Original title: stuck in a reboot loop, can't connect.

  Today, my laptop (VAIO, Windows 8) restarted while I was there and since then has been very slow to start. During loading, I get messages such as 'Your PC came across a problem and must restart' and then 'preparation auto repair' again and again.

  I have tried rebooting several times and sometimes I'll get to the login screen, but when I log into my account (which is the only one available) it says "could not load user profile. Right now, I restarted and did not get to the login screen. It says "repair disk errors. This can take more than an hour to finish."

  Windows 8 is the operating system that is installed with the system. I tried to boot into safe mode several times (SHIFT and F8 at startup), but instead to get a menu of options the computer says "Your PC encountered a problem and needs to restart" and starts all over again.

  Hi Geo,

  What is the model number of the Sony VAIO laptop?

  This problem could be due to corruption of the system files, I suggest you try to perform auto repair using Windows 8 disc of Windows recovery environment (WinRE) and check if it helps.

  To run auto repair on follow computer Windows 8 as follows:

  a. insert the media (USB or DVD) and restart your computer.

  b. press the key F12 (usually it's F12, but it may differ between computer manufacturers) and choose the drive in which you inserted into the installation media.

  c. once that the Windows Setup window appears, follow these steps:

  d. click Next , and then select fix your computer.

  e. you will then see a blue screen and an option to choose. Choose the Troubleshooting option and select Advanced options.

  f. you can choose automatic repair of the advanced boot option.

  Keep us updated on the status of the issue.

• WANT to PC dv7: at startup, I get a blue screen with a :( Your PC has encountered a problem and needs to restart.

  While I was using my laptop I received a message that HP was running some sort of program disagnostic and in the end, he asked if I wanted to repair the problems. I declined the offer. However, the next time I turned on the computer, I saw the first time the HP logo, then the message "automatic repair Preparation". After a few seconds there is a short rectangle that flashes on and disappears. Then I got a blue screen with: your PC encountered a problem and needs to restart. We will restart for you. "Who starts a blue screen and reboot cycle. Blue screens replacement error messages saying: "If you want to learn more, you can search online for later for this error" and once it will say 'FAT file system' and once 'NTFS file system. I have spent to support HP dv7 ENVY page and tried the suggestions of repair without success. Is it possible to go beyond these two error messages and their blue screens to get my system working again? If so, how?

  Hello

  Error code 24 characters is a failure of the short test (DST) disk Self and would indicate that hard is defective and must be replaced.  It is also consistent with your description of the problem.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - if necessary, you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are no longer under warranty, it's a fairly simple procedure to replace the HARD drive yourself - a brief guide on this is below.

  Readers on the following links are examples that would be perfect for your laptop.

  Hard drive 500 GB

  750 GB hard drive.

  1 TB laptop hard drive.

  The procedure to replace the hard drive begins on Page 56 of your maintenance & Service Guide.

  About reinstalling Windows 10 on new HARD drive, as long as the previous installation of Windows 10 had activated Ok after upgrading to Windows 7/8.1, you can simply create your own Windows 10 installation media and perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I have not a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• HPSF.exe has encountered a problem and needs to close

  using pavilion hp Elite desktop, windows 7 Edition 150ff Home premium, receive a HPSF error message. EXE has encountered a problem and needs to close. I tried to download it again from the HP website, but I get a message saying "your system does not meet the minimum requirments for this update, update has been cancelled. (1602) my computer has a hard disk of 1 terabite with 8 GB of ram and I have very little installed above with the exception of 4 songs and microsoft office and student that I bought and Norton Internet Security.

  Someone can tell me why I get this message and how do I fix the problem, my office is wired but my printer is wireless, I have high speed internet and I have also a HP Envy 700-019 again at Christmas last year, which has a HD 2 terabite with 12 GB of ram and windows 8, desktop computers are 64-bit. Not used at the same time.

  This message means that the HP Support Assistant had a problem.

  I recommend to uninstall the application from the--> utility Control Panel programs & features and then put it back. You can use the charm of the search and the type of programs & features. Click on the above icon to call the utility.

  You can reinstall from the Recovery Manager.  Invoke the charm of the search and type in recovery and click the icon.

  

  Find the Recovery Manager from the list of drivers and applications and put a checkmark in the box to the left and then click install in the lower right corner.

  

• "WMI has encountered a problem and needs to close."

  Windows Server 2003 SP2 (virtual server) get this popup error every few minutes: "WMI has encountered a problem and needs to close."
  In the application log:
  Source: Application error
  Event ID: 1000
  Category: (100)
  Failing application wmiprvse.exe, version 5.2.3790.4455, failed module ntdll.dll, version 5.2.3790.4937, address 0x000415f7 failure.

  Any ideas?

  Hello

  Your question is about Windows Server 2003 SP2. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
  I hope this helps!

• TCP/IP services has encountered a problem and need to close. Windows Server 2003 R2 SP2

  TCP/IP services has encountered a problem and need to close.

  Windows Server 2003 R2 SP2

  That left me without a network or to the Internet on a PDC named DOMCON.

  Tried so far:

  1. last signed NIC drivers installed (8.0.27.0) to HP NC3120 Fast Ethernet NIC.

  2 netsh int ip reset resetiplog.txt

  reboot, enter the details of the intellectual property, etc... NO JOY!

  This server has been running for years until now.

  I can join the registry and files DOMCON_MpsReports.cab NetworkSubkey.reg section.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  Here is the link:http://technet.microsoft.com/en-us/windowsserver/bb512919.aspx

• Cannot install 2 black & white or command conquer games. Error:Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience.

  The error occurs when I insert the game black & white 2 or command and conquer the first decade and click install on a automotive screens popping up, I am sure that these two errors are almost identical and sure if one is fixed so will the other be.

  The error that says "Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience. »

  To try to fix it already I found a page here which tells me how to install drivers different installshield, and I installed everything that have been listed. My operating system is Windows Xp home edition

  Hello
  
  Were you able to install these games without any problem before?
  Step 1: Install all updates of windows on your computer and check the number.
  Reference: http://support.microsoft.com/kb/306525 
  
  Step 2: Copy the game on your computer, then check the issue.

  Step 3: Perform the clean boot your computer.

  
  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135
  Note: To restore your computer to a Normal startup mode, follow these steps:
  
  1. click on start in the box start the search.
  2. type msconfig and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.
  3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Patcher.exe has encountered a problem and needs to close. -Windows xp support center.

  Whenever I try to play a mmorpg called jade dynasty, on the Launcher, an error report appears asking me to send or do not send.

  "Patcher.exe has encountered a problem and needs to close."

  How should I do?

  I already tried to reinstall the game and update my video driver and it does not work.

  Hello

  Welcome to the forum of responses to Windows Vista.

  It's Windows Vista forums. To get the best possible answers to your question, I suggest you to report your query in the XP media center discussion forum.

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.Windows.mediacenter&lang=en&CR=us

  Let us know if that helps.

  Kind regards
  Anthony
  Microsoft technical support, please visit our Microsoft answers feedback Forum and let us know what you think.

• How can I fix error Pure Networks Platform Service has encountered a problem and needs to close. We are sorry for the inconvenience.

  Whenever my computer load I get this darn error. Pure Networks Platform Service has encountered a problem and needs to close.  We are sorry for the inconvenience. I also get a pop up nmsrvc.exe Application error. The statement as "0x66f23ff0" referenced memory at "0x00000000". The memory could not be 'read' PLEASE HELP!

  Hi heat110,
   
  -What is the brand and model of the router you are using?
   
  -You "Network Magic" software installed on your computer?
   
  Method 1: As a first step, try to restart the service of Pure platform of networks on your computer.
   
  Follow these steps to do the same thing:
   
  a. Click Start. Click run. Type Services.msc and press ENTER.
   
  (b) in the Services window, search for Pure Networks Platform service.
   
  c. right-click on the service and click on restart.
   
  d. restart the computer and check if you have got rid of the error message.
   
  Method 2: Uninstall Network Magic software and then re - install the software by downloading from the website of the manufacturer if necessary.

• LifeCam .exe has encountered a problem and needs to close

  Im trying to use my lifecam on my xp computer, but it does nothing, but saying lifecam .exe has encountered a problem and needs to close. That's all he does whenever I open it help me!

  Hello

  Thanks for joining us out on Microsoft Community Forums.

  According to the description, you get a message error "Lifecam.exe has encountered a problem and work stoppage.

  1. are you aware of changes to the computer before the show?

  2. What is the model number of the device?

  3. What is the brand and model of the computer?

  Method 1:

  I suggest you perform the steps mentioned in the article.

  From Lifecam software "Application has encountered a problem and needs to close. We are sorry for the inconvenience"error message.

  http://support.Microsoft.com/kb/2027807

  Method 2:

  Put the computer in a State of boot is a way to know which application is causing this problem.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  Step 1: Follow the steps in the link below to do the same thing:

  How to configure Windows XP to start in a "clean boot" State

  Note: After troubleshooting, be sure to set the computer to start as usual as shown here:

  Step 2: To configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. Click Start and then click Run.

  b. type msconfig and click OK. The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  d. When you are prompted, click on restart to restart the computer.

  Hope this information helps. Get back to us if you have more queries about Windows.

• Windows has encountered a problem and needs to close

  Windows has encountered a problem and must close is happening frequently. ; When I try to close it won't let me

  Hello

  Thanks for posting your question in the Microsoft Community Forums.
  It seems that you receive error message "windows has encountered a problem and needs to close" on the computer.

  Provide us the information to help you further.

  1. don't you make changes on the computer before the show?
  2. when exactly you receive the error message?

  Try these steps and check if you are able to solve the problem.
  Method 1:
  Step 1: Check if the problem occurs in safe mode:

  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
  Step 2: If the problem does not occur in safe mode then you can perform a clean boot and check that helps:

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Method 2:

  You can scan System File Checker to fix corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Reference:
  File system (CFS) Checker
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  If you are always faced with the question, please respond with more information, and we will be happy to help you

• I installed the latest version of Norton Internet Security (2013. I received the error message. Symantec's Service infrastructure has encountered a problem and needs to close.

  I am running XP Home Edition and have used the Norton Internet Security software for years.  Support includes an update of the software each year when they are available.  I received a message that the latest version of the software was ready to install.  Well, I installed the latest version and unfortuantely, I continuely receive the following error message...

  Symantec's Service infrastructure has encountered a problem and needs to close.  Contact Microsoft to resolve.

  Is there someone out there who has experienced this error that might be able to help?

  Confused and frustrated.

  Hello

  Thanks for posting on Microsoft Community. I understand that you receive an error message after update Norton Internet Security on the Windows XP computer.

  I apologies for the inconvenience and I it's frustrating if things do not work as expected. However no need to worry I'll be more than happy to help you.

  Please help me with the little information.

  (1) what is the exact full error message?
  (2) is it a paid version?

  Is it that you use not paid version, you can use this link to delete and reinstall Norton Internet Security.

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?version=1&product=home&LG=English&CT=United_States&docid=kb20080710133834EN_EndUserProfile_en_us&PVID=f-home

  You can meet with the screen shot to help you better.

  Reference: how i: post a screen shot on this forum?
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

  Until you, you can also post the your query in the Forums of the Norton Support to improve assistance.
  http://community.Norton.com/

  Response with more information to help you.

• I get the error "Generic host process for Win32 services has encountered a problem and needs to close."

  Original title: I'm under Win XP Pro 64-bit with an amd processor.

  Hi all

  I get "Generic host process for Win32 services has encountered a problem and needs to close" when I first start the computer, the sound works, but after the old generic host appears the sound does not work?  Don't forget that I'm running 64-bit software.

  The search does not work.

  Any help would be great.

  Hi bohawk,

  I got to hit this article the error that you are experiencing with your computer. Refer to the same thing, check if the patch is useful.

  I hope this helps. If this isn't the case, answer so we can look for other options.

• NTVDM. EXE has encountered a problem and needs to close when I tried to open a dos based program today. Is there any solution on the web?

  I use a dos program of basis for the drafting of the accounts. This gave all of a sudden the error today: "NTVDM. EXE has encountered a problem and needs to close"I use Windows XP Professional SP2.

  Hello Eric,

  Take a look at this article to see if it helps:
  Troubleshooting in Windows XP MS-DOS-based programs
  http://support.Microsoft.com/kb/314106

  PS Questions should more properly be addressed to a subforum of Windows XP
  as http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance/

  and btw, your system must be on XP Service pack 3

  See Windows XP Service Pack 3 (SP3): Installation Guide
  http://aumha.NET/viewtopic.php?f=83&t=33296

  also information for Windows Xp Service Pack 3 (sp3)
  http://www.bleepingcomputer.com/forums/topic146857.html

  Space hard drive for Windows XP Service Pack 3 requirements
  http://support.Microsoft.com/kb/947311/

  Support for WinXP (x 86) SP2 ended July 13, 2010. After this date, the computers running Windows XP SP2 (x 86) "will no longer receive software updates from Windows Update" (automatic updates will not work and the Windows Update Web site is not available) until SP3 has been installed.  Extended support for WinXP SP3 will continue through April 8, 2014.

  Does that mean if my version of Windows is no longer supported?
  http://Windows.Microsoft.com/en-us/Windows/Help/What-does-end-of-support-mean