Your POP3 server has not responded in 60 seconds. You want to wait 60 seconds for the server to respond?
I can't get my email charter.net working in Windows Vista Mail...
POP3 account
pop. Charter.NET port 110
SMTP. Charter.NET port 25
I tried a lot of things. It doesn't work in Thunderbird either. Any help would be greatly appreciated. I have gmail accounts that work FINE in Thunderbird... probably would work in Windows Mail... just is not done because he didn't need to. I need my account of the Charter to work in SOMETHING... anything!
Thanks in advance. :)
Connect to the site of Webmail to the Charter and read/erase messages there. It seems that one of them is damaged or very large. Bruce Hagen ~ MS - MVP [Mail]
Tags: Windows
Similar Questions
-
Windows Explorer is not responding. you want to wait, close or restart the program
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs: WINDOS VISTA
- Error messages: WINDOWS EXPLORER IS NOT ANSWER
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
My boss said McAfee Spamkiller in our outlook Express 6. Soon after, we were more able to receive e-mails. It runs on a POP3 server, and I can still access all the info in our webmail. I uninstalled McAfee, and now Outlook is not connect properly. I still have a mcAfee firewall to the top. When I open the program, it says it allows and every 60 seconds a message comes up saying "your POP3 serverhas not responded in 60 seconds. Woud you like to wait 60 seconds for the server to respond?
What should I do?
You have permission to remove McAfee completely? Next to Norton, this is the second AV program less compatible, that you may be able to use with any Windows email client.
Correction of tool McAfee Consumer Product Removal triple
http://service.McAfee.com/FAQDocument.aspx?LC=1033&ID=TS100507There are free programs that are compatible with Outlook Express. Avast is good, but just a program AV. MSE is very good and is an anti-virus, Anti-Spyware & Anti-Malware program all in one and not a resource hog like McAfee.
Microsoft Security Essentials
http://www.Microsoft.com/security_essentials/default.aspxBruce Hagen
MS - MVP October 1, 2004 ~ September 30, 2010
Imperial Beach, CA -
Windows SP1 - "the server has not responded.
Hello!
I perform a clean installation on the machine of my old mother. In fact, service of the only operation I can install is Windows XP Pro. I downloaded the sp1aexpress_usa.exe file to automatically perform the update.
After a few checks performed by the program, he prepared to download the Service Pack 1 files. A few seconds/minutes later, the following error message appears: "the server has not responded.
I spent nearly 3 hours to dig the web to see if I can download SP1 from somewhere within Microsoft, without a bit of luck. Is it possible to upgrade correctly from this machine to SP1 - SP2 - SP3 and thus now or should I format the computer once more and try an operating system open source?
Thanks for your time
Pablo
SP1 (SP1a) is totally useless. All you need to do is to install SP2 and SP3. For more details:
-
XP5.1 SP1a download "the server has not responded.
I had to reinstall XP 5.1 and I try to install SP1a. On the attempt to download - I get the message "the server has not responded. I have an internet connection - I asked the download from the MS. download site For some reason machines updates do not work and I need to install SP1a to get to SP3. Location that is not responding is 'HTTP:xpSP1.micrsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a '.
THX
I had to reinstall XP 5.1 and I try to install SP1a. On the attempt to download - I get the message "the server has not responded. I have an internet connection - I asked the download from the MS. download site For some reason machines updates do not work and I need to install SP1a to get to SP3. Location that is not responding is 'HTTP:xpSP1.micrsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a '.
THX
Were you recently doing a Clean Install? I ask because you are implying in your installation of Windows XP is in 'gold' or SP0 (i.e., pre - SP1) level. Well sure, automatic updates will not work!You can use this path to level – says in passing:Gold XP to XP SP2 to XP SP3.Note that installing SP1a is TOTALLY USELESS!Here are the detailed instructions:1. download the installation of SP2, SP3 and IE8 files. I prefer to keep these on a USB key, but this is optional. Here are the links to all the installation of three files:
http://www.Microsoft.com/download/en/details.aspx?ID=28 (for SP2)
http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)
And if you wish, download the Setup file of a good anti-virus program. I recommend Avira free Antivirus:
http://www.Avira.com/en/Avira-free-antivirus
2. disconnect Internet.
3. temporarily disable the automatic updates.
4. install SP2. Reset.
5 install the SP3. Reset.
6 switch to IE8. Restart TWICE.
7 install an Antivirus software.
(What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).
8 make sure that firewall Windows is activated (it should be).
(Now you can physically reconnect to the Internet.)
9 visit Windows Update to download and install only the critical security updates.
10 re - enable automatic updates.
After the back if you need guidance.
-
I can access the internet but can no longer send or receive mail. I get a message that the POP 3 Server has not responded. Nor do the SMPT server. 0x800CCC19 error number is given in both cases. I have no help when I type the error number in the help Windows Mail. How can I solve this problem?
original title: can't send or receive emails.Tools > accounts > select your account > properties > Server tab, ensure that 'Connect with password' is not enabled.
Or you might want to try the new port settings.
http://www22.Verizon.com/residentialhelp/highspeed/email/setup+and+use/questionsone/124289.htm -
I have problems with my Apple ID when you download applications, that it is said that your ID Apple has not yet been used in the iTunes Store
What exactly is the problem? You are also being invited to review the account and enter payment details? If you did you are your details accepted - if they are, you should be able to remove them then.
-
Windows live has not next start co figuation is incorrect. application of ESA, connect for more details. How do I do that
Hello
Welcome to Windows Live Solution Centerthey will help you with your questions/problems Messenger when repost you the link below in the Messenger forums
-
I want to ask a question about my mobile mouse memory. I googled my problem and arrived at a forum. He has not answered my question, so I want to ask a question, but I couldn't find how to ask.
You can ask your question here.
-
Hello
I have a CC month for Muse subscription ending in August 2015. I missed the last two payments (December 2014 & January 2015) because the credit card, I got the file has been exceeded and I forgot to renew it. Yesterday I updated the credit card, I was charged for January 2015, but my Muse subscription has not been renewed. Can you please help?
Thank you
Polly Leitao
Hello Polly,
for a better explanation: Please try to find members of the staff of Adobe. Here are some links
https://forums.Adobe.com/message/7026062#7026062
https://forums.Adobe.com/message/7068993#7068993
https://forums.Adobe.com/thread/1664231?SR=stream&ru=1545406
where officials have tried to help in many cases (not really relevant to your problem). I got to know some (others) as very useful.
You can get more and feel free to ask the help of a personal message.
Hans-Günter
-
"The server has encountered an error" when you want to send a message with the form.
Hello
"The server has encountered an error" when you want to send a message with the form.
With the businesscatalyst site, the message is well received by the recipient as the site FTP host, the previous message is displayed.
What code do I add and where?
In advance, thank you.
Please, answer in french!
Hello ScratchMaster,
Please see the link below, I'm sure that you will find it useful.
https://forums.Adobe.com/docs/doc-3581
Kind regards
Vivek
-
original title: nwiz error at startup
I get an error on nwiz to restart early upward. The error indicates nwiz.exe hs has encountered a problem and needs to close. We are money for the inconvenience.
I then send an error report to Microcosft. They respond with: a problem of NVIDIA graphics driver. NVIDIA Graphics Driver has stopped working properly. To resolve this issue, go to the NVIDIA Corporation website to download and install the update:
At this point, I tried to contact NVIDIA, but they ae not able to provide any information on the update I need.
I use HP pavilion 754n, Windows XP service pack 3. Presume the NVIDIA was delivered on my computer in 2002. All of the suggestions.
Thank you
lostisfound
Hello
The video card drivers are corrupted on your computer please uninstall the graphics card in the Manager of devices and then re - install the latest drivers from the manufacturer's website.
http://www.nvidia.com/download/index.aspx?lang=en-usReference:
How to manage devices in Windows XP
http://support.Microsoft.com/kb/283658How to solve the problems of hardware with Device Manager
http://www.Microsoft.com/windowsxp/using/Setup/learnmore/devicemgr.mspxI hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
The error occurs when I insert the game black & white 2 or command and conquer the first decade and click install on a automotive screens popping up, I am sure that these two errors are almost identical and sure if one is fixed so will the other be.
The error that says "Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience. »
To try to fix it already I found a page here which tells me how to install drivers different installshield, and I installed everything that have been listed. My operating system is Windows Xp home edition
Hello
Were you able to install these games without any problem before?Step 1: Install all updates of windows on your computer and check the number.
Reference: http://support.microsoft.com/kb/306525
Step 2: Copy the game on your computer, then check the issue.Step 3: Perform the clean boot your computer.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135Note: To restore your computer to a Normal startup mode, follow these steps:
1. click on start in the box start the search.
2. type msconfig and press ENTER.If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
4. When prompted, click on restart.Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
Whenever my computer load I get this darn error. Pure Networks Platform Service has encountered a problem and needs to close. We are sorry for the inconvenience. I also get a pop up nmsrvc.exe Application error. The statement as "0x66f23ff0" referenced memory at "0x00000000". The memory could not be 'read' PLEASE HELP!
Hi heat110,-What is the brand and model of the router you are using?-You "Network Magic" software installed on your computer?Method 1: As a first step, try to restart the service of Pure platform of networks on your computer.Follow these steps to do the same thing:a. Click Start. Click run. Type Services.msc and press ENTER.(b) in the Services window, search for Pure Networks Platform service.c. right-click on the service and click on restart.d. restart the computer and check if you have got rid of the error message.Method 2: Uninstall Network Magic software and then re - install the software by downloading from the website of the manufacturer if necessary. -
Original title: Tamper monitor
I KEEP AN ERROR MESSAGE "TAMPER MONITOR HAS ENCOUNTERED A PROBLEM AND NEEDS TO CLOSE. WE ARE SORRY FOR THE INCONVENIENCE ". HE COME EVERY 3 TO 4 MINUTES, IF YOU CLICK SEND ERROR REPORT OR DON'T SEND IT DISAPPEARS, BUT RETURNS. IF YOU DO NOT CLICK ON FOR A FEW MINUTES, IT FREEZES AND WILL NOT GO OFF THE SCREEN NO MATTER WHAT YOU DO. HOW CAN I SOLVE THIS PROBLEM...
Hello
1. have you installed Norton Security software on your computer?
Sabotage monitor (tapmon.exe) is associated with a component of Norton called Norton safety Minder. I would ask you to uninstall and reinstall the Norton Security software and check. You can also contact Norton support on this issue.
Check out the articles below to uninstall and reinstall the programs in Windows XP.
How to change or remove a program in Windows XP
http://support.Microsoft.com/kb/307895Installation of programs
http://www.Microsoft.com/windowsxp/using/Setup/hwandprograms/installprog.mspxSupport Norton:
http://www.Symantec.com/support/index.jspNote:
It is recommended to install the software of security immediately after the issue is resolved.I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
When you attempt to connect to the VPN Aventail I get th e following in a "Connection error" message box: "you don't have enough privileges for the configuration of the connection properties. Contact your administrator. That this connection has worked before. I suspect a MS patch for breaking it. Any help would be appreciated.
We have solved the problem yesterday, by simply reinstalling the Aventail software.
I spoke to network administrators and nothing had changed, so it's quite strange.
anyway thanks a lot for your help Brian.
See you soon,.
Tobias
Maybe you are looking for
-
Restore bookmarks causing 'no response' / lock up
Recently saved bookmarks firefox, because I have about 10 years ' worth of information. I also use Xmarks. Well trashed my bookmarks Xmarks and Firefox crashes when you try to restoreSince the firefox save. I even disabled Xmarks and it will be all e
-
Satellite Pro A300D - driver for multimedia audio controller
Hello I have Toshiba Satellite pro A300D and someday the built in mic, built into the camera and the speakers stopped working. When I checked the Device Manager, I saw that the driver for the multimedia controller wasn't working so I uninstalled and
-
Laptop of HP 2000: why my PC can't project to a second screen?
This message appears whenever I try to my PC for a second screen of the project: your PC can not project to another screen. Try reinstalling the driver or using a different video card. What should I do? Tried to update my device driver, but it shows
-
Interconnection of fabric as FC switch
Hello can we use a 6120 as a FC switch interconnection, so do the CF normal zoning stuff and connect directly to some CF storage to the FC expansion ports, or do we need run the interconnection in NPV mode and connect it to a switch taking NPIV. Kind
-
Replace with Win 7 32 bit XP Mode using the oem license key?
We have some old software that requires a 32 bit OS. There is no way around that it will never support 64 bit, but must use it occasionally. Currently, we run with XP Mode installed Windows 7 Pro 64 bit. As Microsoft ends support XP on April 8, 201