"Your USB bootable could not be created" - Win 8.1 on Mavericks

Similar Questions

• Your bootable USB key could not be created

  "Your bootable USB key could not be created.

  Hey guys,.

  I Googled what to do about this error message and all I got was to ensure that the ISO is disassembled. I did, and yet I still get the same exact error message. I'm trying to get Windows 7 Home Premium on a 2012-13 inch Mac Book Pro. I also use a flashdrive 16 GB for the ISO image. Any ideas on how to solve this problem?

  Please read: create an ISO image for the Boot Camp Windows installation media.

• "Your bootable USB key could not be created there is not enough space available on the disk.

  I am trying to install a partition of Windows 7 with an ISO on a flash drive with Boot Camp Assistant. Everytime I try it however, I get the error "your bootable USB key could not be created there is not enough space available on the disk. The flash drive that I use for this is 64 GB, so I doubt that the issue has to do with not enough available space. I have already tried the obvious, like reformat the flash drive and retry the write. Is there something I could hurt or do differently to make it work?

  MacBook Pro (retina, mid-2012)

  2.6 GHz Intel Core i7

  8 GB 1600 MHz DDR3

  NVIDIA GeForce GT 650M 1024Mo

  Use a 8GB drive.

• Boot Camp error "your bootable USB key could not be created.

  Hi people...

  I'm trying to create bootable Windows 7 USB using bootcamp but I get this error. I know for sure the file ISO of Windows 7 is 64 bit so how cross the Please this problem?

  

  What is the size of the ISO file?

• "Your bootable USB key could not be created. It is not enough space available on the disk.

  I tried more than a dozen times and ended up with the same results. I bought a 10 windows and disk utility, I created an ISO. Then open Boot Camp and regardless of the USB or external driver I use Boot Camp said that the space is not enough! I used 8GB - 16 GB - 32 GB USB and not everything works. Then I used Baffalo external driver with 1 t and I still got the same message. In all attempts, I erased/formatted and made sure that the format of the USB is MS-DOS. But nothing has worked.

  Anyone know why?

  I use an iMac with screen Retina 5 K (mid-2015) with 3 t

  atooma wrote:

  Anyone know why?

  The W10 installer you have is a Setup 32-bit/64-bit mixed and has one or more files that is larger than 4 GB. It does not fit on any drive formatted as FAT.

  As 2015 Macs do not support a USB Installer. They create an internal partition called OSXRESERVED and use to install only W8.1/W10.

  Can you download an ISO only 64-bit https://www.microsoft.com/en-us/software-download/windows10ISO and test?

  Please see https://help.apple.com/bootcamp/assistant/6.0/#/bcmp173b3bf2 for more details.

• Key USB Bootable Bootcamp could not be created

  Hello, I am trying to install windows 10, I downloaded the iso from microsofts website and already got bootcamp on my USB support software, I tried to install windows with iso 10 but it says "Usb bootable stick could not be created" then under it, he says that he only supports versions 7 or later version of windows , so I assumed it was my iso image, so I Re downloaded and it did not work, I did remove and eject my time of mutiple iso image, reboot, I thought maybe I should reinstall bootcamp but know too much what the problem is. Help, please!

  Hello hawkstrattus,

  Thank you for using communities of Apple Support.

  I understand your message that you are not able to install Windows 10 on your MacBook Air. From your post, I see you're under OS X Lion mountain. Windows 10 requires OS X Yosemite or later. You can upgrade your software on MacBook Air. The following article contains additional information about the system requirements:

  Use 10 Windows on your Mac with Boot Camp

  Best regards

• Windows backup error; A snapshot could not be created.

  Original title: Windows 7 - windows backup - snapshot could not be created

  When you use the Windows backup I get an error indicating that the snapshot could not be created unless I'm trying to backup to DVD or a USB hard drive.

  I use:

  Windows 7 Home Premium SP1

  processor Intel I5 2310

  8 GB RAM

  1.5 TB of hard drive

  The full message is:

  "A snapshot could not be created.  Check the event logs "VSS" and "SPP" application for more information.

  Details: Writer experienced a transient error. I have the backup process is restarted, the error does not recur. »

  Where newspapers there is an event id 8229 - I went to the event log online help and tried all of the listed suggestions, including shutting down my computer and then restarting him and still get the same error.  I tried to disable the antivirus software and do the back up but still get the same error.

  I have spent at the command prompt and typed "vssadmin list writers" to see if all the writers are stable and the following are not listed as stable:

  System Writer - State [5] waiting for completion

  MSSearch writer - State [5] waiting for completion

  WMI Writer - State [9] failed

  What can I do to get the backup to work?

  Hi Tom,

  I wish to inform you that this error may occur if the Volume Shadow Copy Service of Notification of SPP has not started and is not set to automatic. Please refer to these steps to learn how to start their:

  a. on the desktop, press Windows key + R to open the Run dialog box.

  b. type services.msc in the Run dialog boxand press Enter to open Services.

  c. right-click on the shadow copy volume and the SPP Service of Notification services, and then click Properties.

  d. if the box Startup type is set to Disabled, change it to Automatic.

  e. click OK to close the Properties window.

  f. right click on the Volume Shadow Copy and SPP Service of Notification servicesand then click Start. The service should start without errors.

  If you receive any errors, please let us know.

  See the Event Viewer for the exact error message or code, and the cause of the problem. Please let us know the same thing.

  a. click on the Start button.

  b. Type in the Event Viewer, in the search field.

  c. this will bring up the box of Event Viewer . Click to open the Event Viewer.

  d. in the left pane, expand Windowslogs.

  e. click the application log and syslog, one after the other. Select the first event in the log, and then use the arrow keys to scroll down. Most of your event will be in training. Maybe you will see yellow warnings or errors in red. If you see a red error, you can double-click on it to bring it and copy the contents into a document.

   

  Please get back to us with the results.

• Inscription: How could it be pretty darn difficult. The site says: "your email address could not be validated; "Make sure your email is correct and click on register below. I have never validated. S, I register without the possibility to validate. What th

  I tried to register with support, but:
  "Your email address could not be validated; Make sure your email is correct and click on register below. »
  Action: I did.
  Answer: The same. How the H box you confirm if this was not possible.

  This has happened

  Don't know how many times

  is now

  Sign up here and you should be sent a link to the email you provided. If you have not provided an email address valid or an email that has not been used to create a.

• Error: "an error occurred saving the file because it could not be created" during the recording of digitized file

  Original title: I'm not able to save the scan through my HP Officejet 6210 all-in-one.

  I get this error message: an error occurred saving the file because it could not be created. What should I do? I used to be able to save documents in the form of files .pdf until recently when my computer has been infected by a virus, and someone helped clean up remotely.

  Hi ameerlakhani,
   
  Try to save the scanned in a different file format and check if it helps fix the problem.
  Follow the steps in this article and check if it helps.
  Using the HP scan Diagnostic Utility
   
  If this is not enough, post your request in the support forum HP for assistance.
  Visit the following link to do the same thing:
  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/BD-p/scan

• When you try to schedule a task in XP, make a mistake "the new task could not be created the specific error is 0x80070005: access is denied."

  My

  System Type X 86-based PC
  Processor x 86 Family 6 Model 23 Stepping 10 GenuineIntel ~ 3324 Mhz
  A05 BIOS Version/Date Dell Inc., 07-31-2009
  SMBIOS 2.5 version

  I'm trying to schedule a new task I get this error

  The new task could not be created specific error is 0x80070005: access is denied

  I am an administrator for this computer and I am connected to the office network.

  I downloaded a patch KB904423, but it tells me that the installer has detected that the SP of the system version is newer the updte I am applying, I did not need to install this update

  Is there any fix for this?

  Thank you

  Hi dgxp64,

  ·         The computer is on a domain network?

  Method 1: Temporarily disable the antivirus on the computer program and check if it helps. If it works, you may need to check the settings of the program.

  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

  Method 2: Check to see if this article helps you.

  How to solve the scheduled tasks in Windows XP and Windows Server 2003

  Method 3: We will grant permission for the C:\Users folder and check if it helps.

  How to set, view, change, or remove special permissions for files and folders in Windows XP

  If the computer is on a domain network you can post your query on the TechNet Forums.

  Windows XP IT Pro category

• Restore point could not be created

  I tried to create a Point of restoration, but in vain.

  Error measage: Restore Point could not be created for the following reason: access denied (0x80070005).

  I am logged on as administrator, why I can not create a restore point?

  Hello Paul0246,

  Thanks for posting your question on the Microsoft answers Forum.

  We will try to the simple troubleshooting step: turn off System Restore, then turn it back on. This will delete all existing restore points.

  How to disable the system restore in Windows Vista:
  http://bertk.MVPs.org/html/disablesrv.html

  Don't set system restore to monitor other than readers that what is installed on Windows.

  Have you tried to add your account to the list of permissions for the directory of system restore, etc. If this does not work, then try to disable user account control and see if that is the question.
  To disable UAC

  1. Click Startand then click Control Panel. In Control Panel, click user accounts.

  2. In the user accounts window, click user accounts.

  3. In the user accounts tasks window, click turn on UAC enabled or disabled.

  4. If UAC is currently configured in Admin Approval Mode, the user account control message appears. Click continue.

  5. Clear the check box use User Account Control (UAC) to help protect your computer , and then click OK.

  6. Click restart now to apply the changes immediately, or click restart later and close the user accounts tasks window.

  If disable UAC does not help with the creation of a system restore point, try the following:

  (1) put in place a start-up in minimal mode and see if a 3rd party program or software may interfere with the system restore point.
  Follow the article below for instructions on the msconfig configuration (clean boot).
  KB 929135 - how to solve a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  (2) turn off the anti-virus and try to create a system restore point. I would also try to uninstall too.

  Please reply back and let us know if any of these steps has contributed to your question or if you still need help.

  Sincerely,
  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot create a backup, error: "a snapshot could not be created."

  Original title: computer backup

  When you try to back up my computer, I get a message that says "a snapshot could not be created. Storage insufficient to create the shadow copy storage file. My D drive shows that it is full. Can I format drive D I can backup?

  Hello

  The D: partition is normally your recovery partition that you do not touch with the exception of the enumerated grounds.

  You don't tell us the size of your D: partition.

  There are between 5-15GBs, is the recovery partition and read more:

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  How to save properly:

  If you want to do a complete PC Backup or only a backup of files, buy an external hard drive.

  Only Vista professional, comprehensive and company have the opportunity to make complete backups of PC.

  All editions of Vista can do backups of files.

  Here's how to back up and restore your files:

  "How to back up your data.

  http://www.wintuts.com/how-to-backup-your-data

  http://www.home-PC-help.com/windowsvistabackup.html

  "How to restore your files.

  http://www.wintuts.com/how-to-restore-files

  This is how to do a full backup of the computer and how to restore it (for Vista Business, Ultimate and Enterprise only):

  «How to make a backup of the computer in Vista»

  http://www.bleepingcomputer.com/tutorials/how-to-use-Vista-complete-PC-Backup/

  "How to restore a full backup of the computer.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/

  FAQ from Microsoft about backup and restore:

  "Back up and restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are a number of 3rd party programs available for a full backup of the computer; others, you must pay for, some are free.

  This program must be purchased:

  "Acronis True Image".

  http://www.Acronis.com/homecomputing/products/TrueImage/index_gwo.html?utm_expid=4274314-6

  These are free programs for the protection of the computer:

  "EaseUS Todo Backup free"

  http://www.TODO-backup.com/products/home/free-backup-software.htm

  "Download Backup & Recovery 2012 free FREE!

  http://www.Paragon-Software.com/home/BR-free/download.html

  «Macrium Reflect FREE Edition»

  http://www.Macrium.com/reflectfree.aspx

  See you soon

• Can not backup on external hard drive - "snapshot could not be created...» »

  Cannot back up the external hard drive "snapshot could not be created, please check the VSS application log and the PSP" "details - the shadow copy provider had an error" error code «ox81000019» I want to buy a new laptop, but how can I transfer all of the existing computer if I can't do a backup?

  As you go only to transfer data from one to the other files, here's a good option...

  Remove the old hard drive and connect it on the new computer using a USB to SATA connector like this...

  http://www.TigerDirect.ca/applications/SearchTools/item-details.asp?EdpNo=3276554&CATID=11527

  It is a very useful device to have some kicking around when you need to get data on a drive that does more boot.

  You must get permission to access folders on the old disk to the new computer and this is how you do it.

  Download the zip on the site below...

  http://www.howtogeek.com/HOWTO/Windows-Vista/add-take-ownership-to-Explorer-right-click-menu-in-Vista/

  .. and it is there that find the link to the zip on the site...

  

  When you run the zip file, it places a new item in the right click menu called 'Take Ownership'

  To use it, you highlight the file or the folder on which you want the property, right click and select take ownership.

  Then a window will appear and many data authorizations through pretty quickly. When permissions have been granted, the window will close and you will be able to easily access data in the file or the first selected folder...

• Backup on an external hard drive, the error code 0 x 81000019 a snapshot could not be created. Pls chk "vss" and "spp" application event logs.

  A snapshot could not be created. Please check the spp and 'vss' ' applications for more information event logs.

  Details: Insufficient storage available to create the shadow copy storage file or other shadow copy data. Error code 0 x 81000019.

  The size of the external drive is free to Go 465,65 Go 465,75. Also "size of the backups is not available" is displayed under the size of the disk in GB. The size of the backup copy is 57 GB.

  Event logs see the backup error event ID 521

  GENRAL:
  Save the operation which started at 2010-03-11 T 13: 41:53 failed because the service operation volume shadow copy to create a shadow copy of the volume during backup failed with the error code 2155348249.

  Details:
  + System
  -event data
  backup time 2010-03 - 11 t 13: 41:53.466000000Z
  Error code 2155348249
  Error Mssg % 2155348249

  Hi Gilles Pelletier,.

  1. check the shadow copy Volume service in the services window. Use the following steps to check:

  i. click on start and type services.msc in the search box

  II. the search for the shadow copy Volume service

  Please let us know the status and startup type. Make sure that the startup type is automatic

  Steps to set the auto services

  i. search for the service

  II. right-click on the service

  III. If the service is stopped and then starts the service

  IV. Select Properties

  v. and in startup type, select automatic

  2 disable the firewall / anti-virus temporarily installed on your computer and then check if the problem still persists. If the problem is resolved, you will need to uninstall the software and reinstall it back or change the settings and check.

  3. even check a drive for errors: http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors

  Check this link which has the similar problem: http://social.technet.microsoft.com/Forums/en/w7itproperf/thread/9b18bc73-26e5-4b28-819f-11628ebbf5e2

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The data folder of Application for Microsoft Visual Basic Express could not be created.

  Windows 7 Ultimate 64 bit

  After the installation of Microsoft Visual Basic 2010 Express and the execution of the executable, the following message appears: file Visual Basic 2010 Express the Application data for Microsoft Visual Basic 2010 Express could not be created.

  Things, I tried to solve this problem:

  Fixing of the keys in APPDATA

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell folders, HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders ( but they were already OK(  )

  Get full permissions on C:\ProgramData (that I had full access to already)

  Get full permissions on %LocalAppData% (that I had full access to already)

  Running Windows Update

  Vbexpress.exe running as administrator

  None of these solutions worked.

  I noticed that when I open vbexpress.exe (in \Common7\IDE\), it creates a folder in

  %LocalAppData%\Microsoft called 'VBExpress"(which has the blue font),

  VBExpress contains a folder named ' 10.0' and 10.0 has a file named vspdmc.lock with the content "{8603A3A2-D182-4916-BF8B-80A2C531F4D5}". " It is all I could really noticed. I tried running the Sysinternal tools but it has attracted more than 10 million events and counting so I kinda gave up on it. Any help would be greatly appreciated. Thank you

  Hello

  Thank you for visiting the Community Forums of Microsoft.

  Your question related to Visual Basic and seems to be more complex than what is generally answered in the Microsoft Community Forums. It is better suited for the professionals on the MSDN Forums. So I suggest you to post your questions in the MSDN Forums to get help from this link:

  http://social.msdn.Microsoft.com/forums/vstudio/en-us/home?category=VisualStudio

  Hope it will be useful.