YouTube videos start button disappeared and does not start

Similar Questions

• Zoo Tycoon 2 crosses the installshield but then disappears and does not allow to play.

  We just bought this Zoo Tycoon 2 game too and have problems.  It goes throughout the installshield Wizard but then disappears and will not play.   We have uninstalled and I tried several times, still doesn't work.  We have even returned to the store and exchanged thinking it was all just bad software!  What a disappointment not to mention $40.00 in the sewers.  Any advice would be greatly appreciated.

  Hi Tricia,

  Have you tried to run the Setup file to install the game in compatibility mode?
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

• Ffox31 = downloaded Youtube Video Downloader x 4 = stiil does not work?

  I downloaded the add-on: "Youtube Video Downloader" FOUR TIMES, but although it shows on the list of Add-ons, under options, I have no icon/button or whatever in the toolbar to allow me to use it. I tried anyway thinking that it might be on auto, but I was unable to download any video from U Tube.
  What is the problem with this one?
  I noticed he's asking for $ 10, it means that until it is paid, there will be no activation?
  I don't mind paying, but I want to see if it works first!
  Any help welcome,
  Thank you.

  HI ArletteGH,
  Please check to see if it is compatible with the latest version of Firefox (32.0.3) but also please see the link of support for the addon on the home page of the addon.

• Floating tools panel disappeared and does not return

  Can someone help me

  You can use either tips on how to get it back.

  • Launch of Muse
  • Click Toolbars, once (if it is not verified and it will get the tools back floating somewhere in the Interface of Muse)

  

  • If toolbars is checked, click once to uncheck the box and click on Windows > toolbars again to reactivate.

  

  If this does not help then also check if its has been moved to the corner of the monitor double in case you use a dual monitor.

  In the case of no luck resetting preference Muse will fix the problem. Please find the below steps:

  Windows:

  • Make sure that Muse is closed and go to the following location
  • C:\Users\\AppData\Roaming\Adobe\Adobe Muse CC ("replace with your windows username")
  • Once rename the folder 2015.0 with 2015.0_old
  • Muse stimulus and toolbars should be there as a default value.

  MAC:

  • Make sure that Muse is closed
  • Click on Finder > go > go to folder
  • Type the ~/library/preferences/adobe/Adobe Muse CC path and press return
  • Once rename the folder 2015.0 with 2015.0_old
  • Muse stimulus and toolbars should be there as a default value.

  Let me know if you are talking about something else.

  Kind regards

  Vivek

• Help! My object disappears and does not reappear AS3.

  Hello! I have an object with a white cross on the top of a mountain. I want my mouse to move on and make them disappear and when my mouse goes there I want what he re - appear. Until now I can make go away by moving my mouse over it, but it will not reappear. Here's the code I'm working on:

  CROSS1933_mc.addEventListener (MouseEvent.MOUSE_MOVE, mouseMOVE); MOVE THE MOUSE ON THE CROSS

  
  

  function mouseMOVE(event:MouseEvent):void {}

  CROSS1933_mc.Alpha = 0;

  }

  

  How the cross reappear? Please help me with the code if you can! Thank you very much!!!

  You must stop using MOUSE_MOVE for everything.  It will trigger no matter when your mouse moves, not only with respect to the object.  You should look into the help documentation of Flash to see all that exists in what concerns the mouse events, you can listen MouseEvent.

  CROSS1933_mc.addEventListener (MouseEvent.ROLL_OVER, overCross);

  function overCross(event:MouseEvent):void {}

  CROSS1933_mc.Alpha = 0;

  }

  CROSS1933_mc.addEventListener (MouseEvent.ROLL_OUT, outcross);

  function outCross(event:MouseEvent):void {}

  CROSS1933_mc.Alpha = 1;

  }

• Videos YouTube showing constantly circle loading and does not.

  So I'm watching videos on YouTube and all I get is the spinning loading circle and nothing more.

  I am running version 37.0.2 (latest) and the most basic add-ons that are up to date. I tried uninstalling and then reinstalling Flash, I uninstalled and reinstalled FireFox and I'm still having the same problem!

  If you have any problems with the current versions of Shockwave Flash plugin then check this:

  • see if there are updates for your graphics card disk drivers

  https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

  • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)

  https://forums.Adobe.com/message/4468493#TemporaryWorkaround

  • turn off hardware acceleration in the Flash plugin

  https://forums.Adobe.com/thread/891337
  See also:

  • http://KB.mozillazine.org/Flash#troubleshooting

• Video record button blackBerry Smartphones does not work

  Version cours.148 and I saw this exact problem posted anywhere else.  When I go to the media, the video and click on the record button that I need to return to the screen of choice of media and I can't seem to start recording.  I tried all the usual things. Does anyone else have this problem?

  Thank you

  Gary

  Solution - really open up the Video Camera to the video camera icon and record from there.  It worked.

• printer do not wake off mode 'sleep' and does not turn off when the Start button / stop pressed or pushed.

  HP printer all-in-one B210a win 7 64 bit.

  no error message just don't wake up from power saving mode and does not turn off when the power button is pressed. must be disconnected and then turned back on. works fine until the power saving mode he did go to sleep then not answer the test print command or Toolbox controls.  power saving mode is turned off, but still goes to sleep.

  First, you will need to make sure that the printer is under warranty.  You can do it here.  So, if you are in warranty, you must contact HP at 1-800-474-6836 and the United States in computer science, international users click here.

• Laptop frequently is off and does not restart even when the Start button / stop is held in

  I have a notebook dv7-3060us running Windows 7, some mornings (every few days or weeks), I find, powered out and does not.  In press and hold the power button for 5-10 seconds has no effect.  I have to unplug and remove the battery to restart.  What happened several times.  I tried it with the battery removed, and it fails again, then.

  A software problem can cause this?  I thought that holding the power button causes a material interruption and the BIOS takes over.

  Is there a known hardware problem which can cause this?

  Thank you

  Adam

  Hi Sean,.

  Thanks for the suggestion.  Unfortunately, the steps listed for a hard reset was precisely what was needed to market every day.  So, we did about 50 times.  The real issue was whether a software problem could cause the phone to require a hard reset every time.

  After not getting no response for a few weeks, I have restored your computer from a backup, I made after the update in the first place and then re-set everything.  So far, it has remained stable, which brings me to the conclusion that it is, in fact, a software issue.

  Kind regards

  Adam

• Craigslist 'Reply' and the buttons 'Add images' does not

  Until a few weeks ago, I used Firefox with no problem when browsing and posting Craigslist ads. Recently, the 'Reply' button in the messages does not at all. Nothing happens when I click it. When I write ads, the button 'Add images' does not save when I click it. I had to go back using Internet Explorer when using Craigslist. Help, please! (If it helps, I had to post this question in Internet Explorer, as the button "Question" on the page does not work in Firefox).

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• NB just by making the effort test and does not start backup

  HP dv7-4177 started having types, wouldn't restart. I tried to test that are inbeded and when I did the stress test he stops and does not restart. I hit the power button and nothing happens. I took the hours of battery sevealr and handed over in but I have nothing seems to help.

  Hello Nutn Spec.  I understand that your notebook is currently unable to boot.

  What kind of questions you know before performing the stress test?  This will help me identify the cause of the problem.

  Have you tried to do a hard reset?  It drains all the residual energy of the laptop and hardware reset forces.  If you haven't tried this before I would suggest trying the following.

  1. Make sure that the laptop is completely turned off.
  2. Remove the battery and AC power.
  3. Press and hold the power button for 15-20 seconds, three times.
  4. Replace the battery and AC power.
  5. Try to start Notepad.

  Let me know the result.  I will keep an eye out for your answer.  Have a great night!

• Application does not start and does not respond. Closed that it self.

  Hi guys

  I made a game for the BlackBerry using Flash Pro CS6 z10. I tried it in the Simulator and I installed it in a system z10.

  To do this, I packed the bar and signed the app using the command line and I send the Simulator and the device with the HELP of graphics OS Tablet.

  Everything works perfectly, in the SIM and the device... However, when I presented the game on the portal of the seller for review and approval, I had... "correct the following issues and resubmit your application as a new version."

  I'm testing your app on the BlackBerry Z10. When I press the icon for your application, it does not start and does not respond. Closed by it self. » ...

  Anyone know how to solve this problem or what can I do? (and why it's working ok for me and not them?)

  Thank you very much!

  OK, I downloaded your app and checked that it uses Stage3D (you renderMode value to indicate in the app.xml file). I tested it in point 10.2 and it works for me. When using the portal provider make sure you specify BlackBerry 10.2 or higher.

• I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

  I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

  Please contact the original publisher of the widget.

  Thank you

  Sanjit

• Stay in white adjustment layer and does not apply its effects to the video overlay?

  Stay in white adjustment layer and does not apply its effects to the video overlay?

  I used color correction adjustment layers and now my adjustment layer is just stay white and I watched so many forums and I can't find what I'm doing wrong...

  I have reset my preferences, I did a new project that I am naïve.

  

  It's After Effects but... Try opening the composition window (TAB)

  You are looking at the AL in the film window.

• My Revel App button is grey on my iPhone 5 and does not open.

  My Revel App button is grey on my iPhone 5 and does not open.

  We are aware of the problem installation people are affected by the latest version of iOS, and we are sorry for the inconvenience it has caused.

  We do rigorous testing before all releases, but unfortunately an unexpected interoperability problem occurred with the way our App is getting wrapped up for delivery to customers. We are working closely with Apple to fix the problem as soon as possible. Thank you for your patience. In the meantime, feel free to Revel access via your web browser, Mac, 8 windows, Android devices.

  I'll post to the thread as I get updates:

  Problem installing Adobe Revel 2.3.2