Z10 using blackBerry keypad during a call

Similar Questions

• Hearing of blackBerry Smartphones during the call sound

  
  

  If you look in the settings of the phone, I think that there is an option to activate alerts during phone calls.

• BlackBerry Smartphones Blackberry freezes during a call after update

  Hello.  I bought my Blackberry 8300 Curve on April 2008 and it was working very well.  Two weeks ago, I decided to connect the unit to the computer for an update and have downloaded the latest version of the software for blackberry (not by choice, the update practically pushed himself) and, since then, 98 percent of the calls I'm freezing with and without the bluetooth device.  I push all the buttons and it does not; I remove the battery and put it back and turn on the unit and it is still frozen.  Is it possible at all to do a rollback on update or correct this problem?

  You can recharge your device OS... can something gone wrong. See the following article:

  • http://supportforums.BlackBerry.com/Rim/Board/message?message.UID=228990#U228990

  Also make sure that your carriers download site for you make sure you have the latest version:

  • http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  Good luck and let us know!

• BlackBerry 10 Z10 Home icon during the call

  Hello

  I just upgraded my curve 8530 Z10 and just learn the use of the new hand held device.

  I noticed that when I'm on a call I can't view other applications like email, textmsgs, bbm and contacts.

  With your old phone, you can click on the home button during a call and read emails and textmsgs.

  Can you please give me directions how?

  Thank you
  Rachel.

  While you are in a call, drag the bottom bezel up as if you were about to look at your Hub.  This will reduce the phone app while keeping the active call.  You can then bounce in and out of other applications while your call is still in progress.  To end the call, press the call key in the lower left corner to go back to the call screen where you can end the call.

  I hope that helps you.

• BlackBerry Z10 recharge using Blackberry link

  Hi, when I try to charge my Blackberry Z10 via Blackberry link it ask the password device that I go and she agrees and then it goes to the next screen initialization software update and it's been more than 30 minutes stuck that one screen on the PC and the green light is on, the device. I also want to ask if what he's going to fix my problem of battery because when it reaches 20% if it stops and I have to charge. Which will allow better, a security wipe and a refill using the link to Blackberry.

  Thanks in advance.

  The other thing to try is remove the battery and leave for about 90 minutes. It may take one or two times to do.

  If that still doesn't help not so you can try the wipe of security first, but you may need to replace the battery.

• BlackBerry smartphones, I have a Curve 8330 (Sprint). I can send/REC/WAV SMS / texting or emails send/REC/WAV during a call?

  I have a BlackBerry Curve 8330 (Sprint).  Can I send and receive the SMS/Text Messages or send/receive e-mails from Yahoo, Hotmail or Gmail accounts during a call?  To get an audio notification (beep), it seems to me when I get new SMS or Email during a call but I can't seem to send/receive when I'm on a call.  I can't browse the internet either.  He told me to end the voice call first.  Is there a way can I fix?

  Please let me know as soon as possible.  Thank you.

  Hi and welcome to the forums!

  Please, try the following

  Remove the battery while the device is activated, replace after one minute,

  Let the device reboot 1-3 min, retry the function that was the problem

  Please let me know!

  Thank you

• BlackBerry Z10 using Internet tethering and Wi - fi area reactive on the Z10

  The default router on the Z10 for internet tethering or a configuration point hot seems to be 192.168.0.1 and the IP address it assigns my laptop when I connect to it is within this range of IP addresses... The question I have is when I connect to a VPN service where the internal IP addresses used are also on the 192.168.0.x subnet.

  Is it possible for me to change the IP rangde the Z10 used when it assigns IP addresses to client connections?

  THX

  Hi, thanks for the response.  I hope it's something that can be changed in the next version of the operating system.

• BlackBerry smartphone keyboard tones during a call

  Does anyone know how to close the keyboard so that there is no sound during a call? I went into options and changed there but on two different beads, it did not work.

  So as soon as now, I'm going into profiles before I make a call and change it to quiet.

  Thank you!

  The noise your hearing even after turned off the tone of the keys in Options-> screen / keyboard-> tone: first, cannot be avoided. Sorry to say that you will have to live with it!

• BlackBerry Smartphones SMS during a call...

  Hello, all!

  I was wondering if there was a way of SMS on the phone with someone? On my Samsung Instinct, I was able to hold a telephone conversation during the filming of a text message to someone else, and the message was sent. However, on my Curve 8330, when I'm on the phone, I can go to the home screen and enter my text message Inbox, and same type of a message, but, when I hit "send", the message fails to send every time. BlackBerrys are generally not designed to send text messages during a call? Or y at - there any unknown parameter I've yet to discover on the device?

  See you soon,.

  Zachariah

  Welcome to the forums.

  Yes, you should be able to send and receive an SMS message when a call, because they are the two characteristics of the "voice."  I did before with my son when on a phone call.  Works like a charm.

• Crush: Using the touch screen during a call

  When I try to look for a contact during a call, I can go to my contacts list via the shortcut key. However, the screen turns off automatically return after onlt on abnd 2 seconds, I'm not fast enough to get what I need at the moment, much less to read a phone number to my caller. Is there a way to set this delay?

  I also realized that having the function of hearing device in position "On" turns off the retro-lighting/touchscreen after about 1 second when checking voicemail.  If you are not fast enough to type your password on the screen, the screen turns off after 1 second even if the phone is not close to your ear.

• Z10 Z10 crahses Blackberry BlackBerry; does not turn off button, and struggles to access the hub

  I just got a new blackberry Z10. which I believe has been refurbishing My Vodafone provider.

  The blackberry is so bad that they actually sent me a knew phone and does not want this return of blackberry but I am frustrated by the latter.

  When receiveing the blackberry, I got the unlock code to unlock it, it worked perfectly.  Once unlocked, I entered my Vodafone SIM that didn't do not need to still use it with another sim card.

  First, I updated the blackberry for the last version of the software and complete the set up process.

  Then I restored my old data from my previous Blackberry Z10, which also does not (various issues)

  The phone blocks (blocks) and did different things; the screen freezes and does not even turn it off the button, I have to take the battery out to restart it, or I have to screen does not freeze, but you cannot access texts/emails or contacts and he says 'prepare the hub' but never really in it.

  Sometimes it will allow me to use the off button, but especially, I have to take the battery out and put back starting.

  It is possible to make a call sometimes, but he cuts during the call.

  I have reset the blackberry back to the factory settings and even tried to use with on a restoration, just in case my data has been corrupted somehow.

  I tried to use it with a different network sim card and also tried it with a sim card, just so use it on wifi, the same problems.

  I was sent a new battery so tried both batteries.

  I have reset to factory several times.

  Any help would be appreciated.

  Linda

  It happens to any type of equipment.

• screen unlock during a call

  During a call with the phone to my ear, the screen darkens, as it should.  When I get on the phone to my ear to hang up or use the dial pad, the screen remains black and do not go to the dial pad or other functions of the phone.  When this happens, I can't yet to hang up the call.  I have to wait timeout.

  This has happened 3 times recently.

  Verizon iphone 6

  9.3.1 (13E238)

  You get a deal on the phone? Do you have a screen on the phone, if no case protector? If you have a deal on the phone, have you tried to remove the case and test the appeal at this time. This looks like a proximity sensor problem, but we need to solve it.

• Black screen during the call I phone 6 more

  BBlack screen while on a call to the phone I 6 more

  The screen is supposed to close during a call. As soon as you press it against your ear, the proximity sensor is turning off screen, in order to avoid "plays the numbering" or similar effects.

  If the screen is not active as soon as you lift the phone to your ear, check if the proximity on the top of the screen sensor is not covered by a protective film or the case, if you use one.

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again?

  You won't lose data by resetting, but it can cure a few glitches.

  To make sure that it is not software related, set it back to factory settings, without using any data backup later. Set up the rest of the personal settings manually and test the phone.

  If the phone works again, restore the last backup. If the problem returns, the data backup contains damaged data, causing your issues.

  If this still does not work after that, get the phone checked for hardware problems by visiting an Apple store or Apple authorized service next to your site provider.

  Or contact the Apple Support to send it.

  Use iTunes to restore your device to factory settings - Support Apple iOS

  Find an Apple authorized service provider

  Apple iPhone - contact Support - support

• volume during a call keeps returning to 50%

  as shown in the topic, whenever I have to place a new call (even on the internet calls, FB, Skype etc.) the volume during a call is set at 50%.

  I noticed this, because when I receive or make a call, the voice of the other guy call me or the 'sound' ringtone when I the a call is very low. So what I did is press the volume key to the top, looked at the screen to see if it is complete already. to my surprise the volume slider is located at halfway, until I have slide all the way up (100%) so that I can hear the sound of the headset.

  I wonder why or how this volume keeps coming back to halfway(50%) when a new call is made on appeal. It was as if the default value is 50% in-call volume even if I have the changed already to full (100%) in the last call.

  What can I do to make it default to full volume of appeal (100%)?

  BTW, this has past I think that after the update (26.1.B.2.147), my unit is M4 double Aqua (E2333).

  Thanks in advance!

  After watching, I discovered that the culprit was the Messenger of facebook.

  whenever I use the Messenger FB to make call/videocall, it automatically "presets" the call volume slider to half way down (50%). I followed a normal call immediately after the call FB, then my volume during a call is always 50%.

  However, if I did a normal call (with the volume during a call raised up to 100%) followed by other normal calls, it remains on 100% (or whatever the last call volume was normal). using the call new FB will ruin it again.

  I think that I have to deal with it, I use Messenger FB anyway.

  Thank you.

• Turn off the screen during the call

  I'm working on an application BB10 requiring to be able to turn off the screen in the same way as holding it close to your face during a call. What can I use to deactivate and reactivate the screen?

  I solved this by adding a container around the outermost container in the hide/show of the container and QML file inside in response to proximity sensors readings.

  I posted a question and answer on Stack Overflow to explain it: turn off the screen during the call