Z10 Z10 STL 100-3 wipes after each reboot BlackBerry BlackBerry.

Similar Questions

• Downloaded Windows 10. Yet, after each reboot, windows 7 restart... no windows 10?

  Original title: Windows 10

  I have a laptop with windows 7 installed. I ran a few the applet to see if the laptop is eligible. He did, and I see the windows icon 10 appearing in the task bar. I click on it to get the upgrade and windows starts the download process. Then after it is downloaded double click on the file and it seems to be the installation. This seems to go to the end and I restarted several times when asked to do so.

  Yet, after each reboot, windows 7 restart... no windows 10.

  Review:

  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Firefox cleans the exceptions list 'Allowed Sites - Installation of modules' after each reboot.

  Firefox cleans the exceptions list 'Allowed Sites - Installation of modules' after each reboot. I tried the new own profile - everything works fine. I don't want to installation and implementing all addons after reset of profile, so try to understand the problem.

  Compensation for the "Site Preferences" (in the "Clear recent history" or Ctrl + Shift + Delete) same for the "last time" helped.

  (permissions.sqlite contained an empty table instead of default lines)

• AVG detects viruses, C:\sccfg.sys if I scan and delete, it will appear after each reboot.

  Original title: C:\sccfg.sys

  AVG detects C:\sccfg.sys
  What is a rootkit?
  How can I get rid of it permanently?
  I ask AVG Anti-virus (free) to cope - AVV, then asks me to restart the computer
  After the re - start AVG advises me that the threat has been eliminated.
  AVG analysis finds no problem for the next (approx.) 2-3 weeks
  Then, the threat is detected again.
  I have lived this cycle several times now.
  BUT I want to get rid of the threat for good.

  Internet search suggests this threat comes from a program called "Folder Lock", (which I had installed for several years) but AVG has only been reported as a threat for maybe three months.
  Research on the Internet tells me that the problem cannot be solved by uninstalling "Folder Lock"

  How can I get rid of this threat?

  Hi Leeds,

  It seems that AVG detects C:\sccfg.sys as virus, if you scan and delete, it will appear after each reboot.

  Let's run the virus scan in safe mode with networking:

  Check out this link to start your computer in safe mode with networking:

  A description of the options to boot in Safe Mode Windows XP http://support.microsoft.com/kb/315222

  After starting in safe mode with network, virus using AVG anti-virus scanner.

  With AVG Anti-virus, perform a full scan using the Microsoft Safety Scanner.

  Refer to this link:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps!

• My desktop icons keep stepping back to the left side down after each reboot.

  Micons office keep movong

  I am running Win XP with Vista Upgrade. All of a sudden my desktop icons keep stepping back to the left side down after each reboot

  I am running Win XP with Vista Upgrade. All of a sudden my desktop icons keep stepping back to the left side down after each reboot

  Try this tutorial. It worked for me when I had Vista 32 bit. I used to have more than 150 shortcuts on deskops, and they tended to move 'by themselves' as you said. This tutorial below worked for me.

  http://www.howtogeek.com/HOWTO/Windows-Vista/save-and-restore-desktop-icon-layout-in-Windows-Vista/

  Note: the tutorial is done for Vista 32 bit.

  Is a 64-bit installation program which I have not tried. I can't guarantee that.

• Notification of App calendar activated after each reboot

  Hello

  I use the calendar app Google Calendar of Playstore. Then I turned off the notifications the calender app preinstalles form.

  After each reboot notification by default calendar app settings are enabled if I get all notifications of calendar twice. Google Calendar and the calendar preinstalles application.

  There seems to be a bug, because a repair with the android firmware installation actually lollipop has no effect.

  Can you reproduce this bug?

  Thank you!

  @ThundiX

  If you disable an app, that it will not turn on unless you go to

  Settings > applications > select the application > activate.

• Folder permissions resets automatically after each reboot

  Hello

  I have windows 7 x 64 user. There is a problem with google reader I need different from that of the default permissions for C:\Users\\AppData\Local\Temp. I changed the permissions in this way: make a right click-> Security-> advanced-> permissions-> change approval-> clicked on include... inherited permissions and replace the child object permissions... Also, the folder option, I changed the hidden folders. However, after each reboot, I see not hidden files (hidden folder option resets to do not show hidden file) and permissions for resetting folder above. What causes reset of the changed properties? I have no optimizer tool except ccleaner. I use mcafee antivirus. I think that mcafee is unlikely to cause this problem. 
  How can I solve this problem? I tried to make the batch file that runs boot, but I can't use option "inherit permissions". I give you the batch commands:
  ICACLS C:\Users\\AppData\Local\Temp /setowner directors

  ICACLS "C:\Users\\AppData\Local\Temp" / grant everyone: F
  But these commands do not work to change the permissions in the manner described above.
  Help, please. Really need help.

  ICACLS C:\Users\\AppData\Local\Temp /setowner directors

  ICACLS "C:\Users\\AppData\Local\Temp" / grant everyone: F

  But these commands do not work to change the permissions in the manner described above.

  Help, please. Really need help.

  There was a similar post last week which unfortunately has fizzed out (as do about 95% of all messages...).  Maybe you can gather enough energy not only to track down the source of your problem, but also post an answer here.

  The following commands do not work:
  takeown /f "%Temp%" /.
  Cacls "%Temp%" / t/g everyone: F
  (answer Y to the prompt)
  And Yes, I know cacls.exe is deprecated. But it still works!

• I tried to upgrade to Firefox Ver 28, but after each reboot it always shows the version 27.0.1

  I had been using Firefox Ver 26 and each time it restarts, there is a prompt to upgrade to version 28. I tried to install the upgrade and even after a reboot, continued the old version. Twelve, I uninstalled Firefox and installed new worm 27.0.1 when I check for the upgrade, it downloads a 15 MB file, but continues with worm 27.0.7 even after reboot. Am I missing something?

  1. Download the installer for the language you are interested in.
     • http://www.Mozilla.org/Firefox/all/
  2. Release of Firefox.
  3. Uninstall Firefox from the control panel. DO NOT tick the option on the deletion of your personal data and customizations.
  4. Run the installer downloaded previously.

• Computer failed to recognize 'Expert MMO Gaming Mouse Razer Naga' after each reboot.

  I have a razor naga, I had Software Web site that work very well for the pilots.  I had install a 2.0 synap every sence when I start my computer with my pc does not but the razor on the rise. I have to unplug the mouse and plug it back it to this work.

  Original title: Razer Naga Expert MMO Gaming Mouse

  Hello

  1. What version of the Windows operating system installed on your computer?
  2. What is the model number of mouse?
  3. What is the make and model of computer?

  Try the following basic methods and check after each method:

  Method 1: Run hardware and devices Troubleshooter.

  Method 2: mouse, touchpad and keyboard with Windows problems

  It will be useful.

• Create a Windows 7 user profile which resets after each reboot.

  I want to configure a limited in Windows 7 user profile that performs the following steps after EACH restart or disconnection:

  • Reset the background / theme
  • Reset the desktop icons / shortcuts
  • Network mapped reset drives
  • Reset saved passwords
  • Delete the data stored since the last session
  • Remove newly installed applications / block the installation of the application
  • Reset the print queue to empty - if it was not already
  • Reset the default printer
  • Reset the homepage Internet Explore & settings
  • Reset the screen resolution

  The idea is to create a profile for workstations in an office of the admin who works a bit like an internet café. They have a couple of shared workstations, a network printer, and they store the data on a file server and work on a local application server.

  The current problem is that they constantly record their passwords, remove network drives and change the General configuration of work stations (by chance), which makes it difficult for other users to work - that they do not recognize the look & feel and now don't know where to do what.

  I want to create a 'shared' user profile where they can log on, and everything looks familiar. All settings are saved as defaults and no matter what you do, as soon as you log out or restart, the parameters of return by default.

  I would appreciate help.

  Here are a few options:

  • Windows steady state (http://www.microsoft.com/windows/products/winfamily/sharedaccess/default.mspx). The product is supported for Windows XP and Vista, but maybe it works for Windows 7 too. Or maybe there is an equivalent Windows 7 somewhere.
  • Create a scheduled task that runs at boot time. You must run this command:
    Robocopy c:\Users\UserName.bak c:\Users\UserName/s / r: 1 w:1 /MIR /IS /IT /np 1 > c:\Windows\temp\restore.log 2 > & 1
    Note this:
    -Before starting, you must use the robocopy command in reverse so that it fills the C:\Users\UserName.bak folder.
    -The task must be run under the system account.
    -The task will run with the highest privileges.
    -Use during the testing of the installation log file. Subsequently you can pass you.
    -L' tool does not reset passwords. You must create a policy that prevents users from changing the password.

• Having to reinstall the Flash after each reboot.

  Windows 7 - IE9 - Flash version 11.0.1.152 - Plugins and OS update - ESET Smart Securty 4

  I am prompted to install the new version of Flash after a reboot, then, it happens at least once a day.

  I have install Flash and he moved very well and works until the PC starts again.

  I tried some of the following:

  -Use the Adobe Flash uninstaller before installing

  -Using the stand-alone Installer

  -Checked filter ActiveX and it has been off... turning on the causes

  This same behavior, but the problem I have has nothing to do with the filter

  Not sure when this started, but the user does not have this problem until recently.

  I use ESET Smart Security 4. On all of our systems, and that his PC is the only

  one that has a problem. Need elements pretty hard until I took the trouble

  with uninstall ESET just to see if that would help.

  The part that is really strange... If I manage add on, when it is running,

  I see that the Flash player it and name of Adobe here and that it is enabled.

  After I reboot and go into the Add-ons Manager, Flash is still there and still

  activated, but it now says "Unknown" instead of "Adobe" and is therefore no longer

  other programs Adobe listed. But then, when I reinstall, which becomes

  'fixed' and now, Adobe still says. So it seems almost like a problem of IE9

  and maybe a problem of corruption. No known problems with the PC. I guess

  reload from PC to starting from scratch would fix the problem... at least I hope he would,

  but I'm not ready for the main surgery if there is an easier solution.

  The TakeOwnership script took care of the problem. I'm not 100% OK with it, because it seems to just move UAC and a decrease in security. But at least it now seems to work the way it is supposed to in IE9 and I still probably charge this PC from scratch at an opportune time. Thank you!

• I get a blue screen for a few seconds after each reboot.

  Can you help me find how to solve this problem? Whenever the computer is now receiving a blue screen of death about 20 seconds after I see all my icons on the desktop after a reboot. I write this in safe mode on my computer.

  EMERALD ASH BORER

  These were related to fsni32. sys that is a pilot of F-secure.  I remove it and replace it with MSE

  You must also seriously update to SP2, without it, you're an obvious target for malware.

  http://www.Microsoft.com/security_essentials/

• Status of Volume failure redundancy mirrored after each reboot with Windows 7 Ultimate edition.

  I have 2 x 2 TB hard drives that I put as dynamic disks and mirrored Volumes (software through Windows 7). There are data on the disks and when I created first the mirror and he finished re-synchronization status has been set to healthy. Now after restarting the computer the disks come with a warning in management records indicating the failure of redundancy. I can reactivate the disk and it synchronizes and back healthy (which takes all day) but after a reboot it says has a failure of redundancy again.

  Have not been able to find something that helps or stops this from happening.

  I just changed 1 TB for windows changed 2 TB disks numbers of himself...

• Pictures of blackBerry Z10 BB Z10 disappeared when connected to the PC via USB Phone model z10 STL 100-1

  Help on unit Photos and videos not Visible when connected to the PC via USB. I also tried to restart and reinsert the SD card but no response what happens each time I take pictures and try to transfer to the pc via USB please help to recover the photos suggest something?

  ampawase wrote:
  Help on unit Photos and videos not Visible when connected to the PC via USB. I also tried to restart and reinsert the SD card but no response what happens each time I take pictures and try to transfer to the pc via USB please help to recover the photos suggest something?

  "A wireless connection with the mixture, use the file manager, hold Media Card - Photos - 'Shift' or ' Ctrl ' key - select thumbnails - right-click - Save slot - selecting a folder on the pc and save them.

• I customized my ff and edited a few scratches here and there, but after each reboot ff replaces! and my home/arrow/refresh page buttons are really becomeugly

  Hello

  I use FF for years, but now it is starting to disappoint me! I adapted my FF and added some scratches here and there, and normally, everything else as I want/set but... until a few days... every time I restart FF it replaces some scratches left to right and vice versa! Very annoying!

  Another problem is that my "home/arrow page (rear) / refresh" buttons have become so ugly and small and no I don't thick 'buttons' in the options.

  I don't really know what is the problem, but now it is starting to be very boring!

  Here's a printscreen BEFORE FF it's ruin: look how beautiful the buttons are and other things!

  [img] http://I3.lulzimg.com/1919c1d2a9.jpg line

  And here are FF ugly with ugly buttons and in the good uppercorner strips left the adblockplus should be on the right, but it is replaced by its me after that I restarted FF each time!

  I admit that when I saw that it replaces the scratches I UN-and/reinstalled FF and after that the buttons becomes too ugly....

  What could be the problem?

  This module has been modded to cancel the theme changes in Firefox on Vista and Win7 14.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/cstbb/