Z2 restarts when connected to the charger

Similar Questions

• system restart when connecting to the remote desktop

  Hi team,

  I have a system and we mainly by using Remote Desktop connection... We are facing a question like: -.
  Suppose that a person take system through MSTSC, and after some time, if someone else will try to take remote desktop that PC even on this weather system will restart and then only another person will be able to access...
  I did some troubleshooting steps: -.
  System analysis but no virus detected...

  You could someone help me on this...

  Kind regards
  Narendra

  do you want to say that restart the computer, or do you mean that the current user is disconnected when a new user enters the new user credentials.

  If you mean the user is disconnected, keep in mind that XP pro only allows a user to be active at a time.

  Take the example of computer B, computer A and computer C.

  computer A is that B and C are trying to connect to via MSTSC.

  first computer B connects to A loggs, then runs a program. 10 minutes later computer C attempts to connect to A, and loggs on. If the credentials of the user are different from those used by computer B, will be disconnected the session on A and C will start a new session. This means that all of the programs that were running will be closed during the disconnection process.

  the way round, it would be to use the same newspaper on computer B or C on computer A credentials, anything could happen would computer B may be disconnected, and computer C would take control of the session if all running programs should continue to run.

  the other option would be to have all programs running as a service on computer A, but it really depends what you have found computer has to do.

  I hope this helps.

• My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do?  Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.

• Satellite L300 restart loop if connected to the charger

  Hi all

  My small laptop (Win-7 32) of Toshiba Satellite L-300 which is 3 years old is stuck with a strange problem to enter a loop of reboot if connected to the charger.
  It works fine on battery.
  But it goes into a loop to restart at the point where I plug in the charger.
  I tried without battery by plugging in the charger, the problem still exists.
  Tried to change shippers that always the same thing happens.

  The method of isolation of the problem, I have concluded that the battery and charger are not the reasons. What else could be? Help, please

  Please help identify the problem.

  >... problem to enter a loop of reboot if connected to the charger.
  How to understand this?
  What happens when you press the button walk / stop?
  On what level mobile restarts?

• IPad no charging current after the update to IOS 10, when connected to the laptop.

  My Ipad no charging current after the update to IOS 10, when connected to the laptop. But fine load with Bank charger or battery with the same cable brightening.

  PL suggest how to overcome this problem.

  Have a look here If your iPhone, iPad or iPod touch won't charge - Apple Support

• Satellite A500 - battery light flashes when connected to the power supply

  Win 7 Satellite A500 PSAM3A-03P00E.

  Battery light flashes when connected to the power supply (intermittent fault), when I disconnect the sector and reconnect the flashing stops and battery (high capacity) continues to receive.

  Also, when battery light blinks the keyboard backlight stays on when it should white and if the backlight is turned off and the battery light starts to blink the keyboard backlight turns on, all other functions seem to work well.

  Charges of battery and the wedges load properly (when the battery flashes).

  Hello

  Have you noticed this problem since the first day of purchase?
  Theoretically, it could be possible that your battery begins to malfunction
  On the other hand, an electrical problem could also be possible

  However, try this:
  Remove the battery and the AC adapter. Then press and hold button power 30 sec long.
  Then insert the battery and plug AC adapter still does that help?

  By the way: this is the BIOS updated? If this isn't the case, perform an update.

• Pictures of blackBerry Z10 BB Z10 disappeared when connected to the PC via USB Phone model z10 STL 100-1

  Help on unit Photos and videos not Visible when connected to the PC via USB. I also tried to restart and reinsert the SD card but no response what happens each time I take pictures and try to transfer to the pc via USB please help to recover the photos suggest something?

  ampawase wrote:
  Help on unit Photos and videos not Visible when connected to the PC via USB. I also tried to restart and reinsert the SD card but no response what happens each time I take pictures and try to transfer to the pc via USB please help to recover the photos suggest something?

  "A wireless connection with the mixture, use the file manager, hold Media Card - Photos - 'Shift' or ' Ctrl ' key - select thumbnails - right-click - Save slot - selecting a folder on the pc and save them.

• How long it take restore iphone when connecting to the computer

  How long it take restore iphone when connecting to the computer

  Is based on the amount of data to restore. How long do we have?

  GB

• My macbook bettery finish and get off. When I put the charger there is no charge light? I have reset the SMC, but nothing happened.

  My new book mac early 2015, battery finish and get off. When I put the charger there is no charge light? I have reset the SMC, but nothing happens.

  You can try another charger?

  Also-

   - Press the Option button and click it - system info - Power - post what is shown on the battery please

• can someone tell me why the sound becomes distorted on my external speakers when I plug the charger on my netbook?

  I have a set of logitech speakers and a subwoofer that I use on my netbook, but when I plug the charger to recharge the battery, the sound distorts seriously which means I can listen only as long as the battery, I sent l; ogitech but they said it was a problem on my computer. Anyone have any ideas why?

  Hi gaz2558,

  ·         Have you made changes on the computer before this problem?

  Follow the steps in the article.

  http://support.Microsoft.com/kb/813498

  Also update the latest audio drivers.

  http://support.Microsoft.com/kb/166774

  Reference: http://support.microsoft.com/kb/307918/en-gb

• My computer can not VAT registration and access the internet when connected to the network [secure] through wireless.

  Original title: fix problem 'local only' what is wireless.
   
  -My computer is a HP Pavilion dv5, running windows vista edition Home premium

  -My computer can identify and access the internet when connected to the network through a cable.

  -My computer can identify and access the internet when it is connected to the grace wireless network [without warranty].
  -My computer can't identify [unidentified network] and [room only] internet access when it is connected to the [secure] grace wireless network?
  -Other information systems, identify and access the internet when it is connected to the [secure] grace wireless network.
  -J' confirmed the network, try password works in "safe mode with network", manually configured (TCP/IPv4) using a connected computer.
  S ' Please, I'm desperate and in urgent need of help.

  Hello

  1. If it works well before?

  2 have you made any changes to the computer before the show?

  Method 1:

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point:
  http://support.Microsoft.com/kb/928152

  Method 2: Uninstall and reinstall the network adapter drivers.

  Follow the steps mentioned.

  (a) click Start, right click on computer.
  (b) click on properties, click on Device Manager
  (c) expand the network card, right-click the wireless adapter option
  (d) click on uninstall
  (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

  Follow the below mentioned article:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• HP color laserjet 2605 Error error restart when you print the document

  HP color laserjet 2605 error restart when you print the document, please give me a solution?

  Apparently, there are no other problems to format, I was forced to replace it with a new one, finally hp color laserjet 2605 printer I had to walk normally.

  I hope that the discussion can be useful for each of them, thank you

• Microsoft Office 2007 (Word, Excel, Outlook) slow when connected to the network, but fast when not. with windwos vista

  Microsoft Office (Word, Excel, Outlook) and printer slow when connected to the network, but quickly when not. with windwos vista, I have reintall the operating system, but still the same. Environment Network (Win server)

  Hello

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in Windows Vista IT Pro Technet Forums network.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro/

  I hope this helps.

• 8500 A909G - Feeder causes black streaks on faxes/scans/print jobs... ONLY when you use the charger

  Charger cause black streaks on faxes/scans/print jobs... ONLY when using the charger... If I put something on the glass and printing fax/scan/or it... everything's fine... it was ONLY when I use the charger... did someone come up with a solution to this problem?  Looking at the other reports, it was NOT those that have been fixed... I hope that someone can help me solve this problem, as it was NOT a printer not expensive to buy...

  I'm sorry you have a problem with the vertical lines in the ADF.

  Try to clean with water and lint rollers. There is also a glass of small strip (rectangular) when you lift the lid. Also clean.

  Here is a link that can help you too.

  http://support.HP.com/us-en/document/c01618140

  Let me know if it helps.

• Why can't I access the modem 192.168.1.1 when connected to the wireless router?

  I'm unable to access my DSL Modem 6100 Westell using 192.168.1.1 when connected to the Netgear WNDR3400 wireless router. I can access it, however, when I connect directly to the ethernet port on the computer without going through the router. I've set up according to the instructions. Is it possible to correct the problem?

  This isn't a problem.  This is the standard behavior.  You are connected to the side LAN of the router that is isolated from the side WAN (uplink).  This is the mode of operation of routers.