Z3c and headphones Bose QC20
Hello
I bought the Bose In - Ear noice cancelling Headphones QC20. They are compatible with android, but it seems sony have changed something, because the buttons on the remote did not work properly.
+ increase volume--> it's OK
-the volume reduction--> it's OK
But the answer call/Play Pause, touch skiptrack--> increase the volume. In case of failure. What the * beep * is going on here? I tried it with several other phones of my colleagues (Sony z2, LG G2, Samsung Galaxy S4) are all not work properly. Only the z3 and z3 compact seems to be this strange control.
Any suggestons? I didn't wan't to use other headphones, because they bose are very very good. I travel a lot by plane, and the function listening to noise is great. (Also better than that of sony)
Kind regards
Roemsi
I got more information on this problem and I'm afraid it's a compatibility issue.
The design of the Bose headphones is Samsung specific design and this is also indicated on their homepage. Usually button headphones VAD is designed to be connected to the GND PIN when it is pressed, but when the key VAD of Galaxy S4 headphone kitting, it still has an amount of impedance. We have a different threshold in Z3, Z3c to support the other fuctionalities of our helmets of multi button.
Tags: Sony Phones
Similar Questions
-
iPhone adapter 7 Lightning - headphones Bose
I just bought an iPhone 7 (128 GB) and when trying to read from spotify on my headphones Bose QC20 using the new lightning to 3.5 mm adapter, the control does not work, and the maximum volume is limited compared to my iPhone 6.
Apple is reportedly knowledge of a problem with the controls of headphones via the port of lightning and working on a fix.
-
iPod nano no longer works with headphones Bose
My fairly new nano iPod no longer works with one of my headphones Bose (Bose sport & Quietcomfort) - the iPod no longer meets the headset controls. I know it's the iPod that has a problem that the headphones still work with my phone.
If you haven't already, do a Reset (reboot) on the iPod
Learn how to reset your iPod - Apple Support
If this does not help, he can you want to do a restore of the iPod using iTunes. This erases the iPod, reinstall its software and sets it to the default settings
Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support
-
Hello
I have a HP Pavilion 20 all in one computer. I need to know how to configure the system so that the speakers and headphones at the same time, to play the music. can some help me?
Thank you
Terry
Hello Terry
After looking into this for you, the most common way to have audio play among two different devices is to use a virtual audio device called Mix stereo. I found a YouTube video where someone shows how he installed the stereo mix on Windows 8 Preview of consumer. Unfortunately, read the comments below several users report that the referenced driver does not work for the operating system Windows 8 to address fully released.
I'm not sure another way to have an audio reading of the two different devices on Windows 8.
Some of my sources:
How to turn on the stereo mix on windows vista/7/8
Realtek audio speakers/HDMI switching -
Connection of the loudspeakers and headphones together on Qosmio G30
My question is, if it is possible to use two different audio out on Qosmio G30. It has two connectors, but seems to be linked together. I want to use my Qosmio with virtual DJ, one audio channel speakers and one for the preparation of music (for headphones). I want to have music on the speakers and headphones to better mix.
Is this possible, or should I buy an external sound card? Is it inside the map two-channel audio or not?
Thank youHello
I'm sure that something like this is not possible. On two ports, you will have the sound of some. Music production you can not choose which port should be used for his outgoing.
-
HP-15 ac042tu: Sound speakers and headphones
I just bought a laptop hp-15 but the sound comes from loudspeakers and headphones at the same time instead of automatically cut the speakers. I've tried every suggestion given over the internet, but nothing seems to work. Please help me as soon as possible. Here is a screenshot of the myrealtek hd Manager
Hello
Try the following.
Download the Realtek Audio Installer on the link below and save it in your downloads folder.
http://ftp.HP.com/pub/SoftPaq/sp71001-71500/sp71379.exe
Hold down the Windows key and press R . In the Run box, type devmgmt.msc and press ENTER. In the Device Manager window, expand sound, video and game controllers. Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.
When you are finished, download and reinstall the Chipset driver at the following link.
Once reinstalling, shut down the laptop - this by holding down the key SHIFT left click Shutdown to temporarily prevent a hybrid boot.
Then disconnect the AC adapter and then remove the battery. Press and hold the Power button for 30 seconds. Reinsert the battery and plug in the AC adapter.
Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu. Press f9 to load default settings, use the arrow keys to select 'Yes' and press ENTER. Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.
Let Windows load completely - it can automatically load an audio driver, but let just this complete. Then open your download folder, right-click on the installation of Realtek Audio program and select "Run as Administrator" to launch the installation. Once done, restart the laptop.
Kind regards
DP - K
-
HP ProBook 6550 b
WL555AV
WINDOW 7 64B PROFFETIONAL
Hello
Try the following.
Download IDT Audio Installer on the link below and save it in your downloads folder.
FTP://ftp.HP.com/pub/SoftPaq/sp48001-48500/sp48147.exe
One time finished, open windows control panel, open Device Manager and open sound, video and game controllers. Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.
When you are finished, download and reinstall the Chipset driver at the following link.
After reinstalling, shut down the laptop, unplug the AC adapter and then remove the battery. Press and hold the Power button for 30 seconds. Reinsert the battery and plug in the AC adapter.
Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu. Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER. Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.
Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete. Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation. Once this done, do a right-click the speaker icon in the taskbar and select playback devices. 'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.
Kind regards
DP - K
-
His problem with laptop speakers and headphones
Yes, the night last and Eve, my speakers worked very well. In the long run a moment a Skype call, I had to switch to headphones because volume speakers is weak for a reason any. Don't ask me how or why. in any case, I have it plugged headphones can hear the sound of typing the volume bar in the Volume control and can listen to music through THAT my helmet. I've heard if your not careful, you can jam the switch between laptop speakers and headphones, so I tried pulling the plug in and out a few times, not good... I have a Dell Inspiron 9400 Intel under Windows XP SP3.
Also, I made sure all the boxes in my properties of Volume control are enabled and are uncut.EDIT: So, figures that my Sigma Tel Audio necessary or needed a new driver, I went to Dell.com and downloaded the last being, installed, rebooted and then suddenly I hear these little tones, sounds is fixed again. So, I don't know if this issue must meet more.Hello
Thanks for sharing your resolution.
In the future, if you come across any question relating to Windows please visit Microsoft Answers forum.
-
I want to use only the external mike and headphones
However, somehow the microphone for the internal webcam or Skype or else suddenly transformed, so now I have two of them. The internal MIC is echoing to the sounds of television, me and interferes with my external mike recording.
I cut it by adjusting the levels, but I want that he TAKES... OFF! When I go into properties, it shows just an icon for the external mike and headphones, it does not seem to suggest that there is another work of mike. It's windows 7, 7 year old computer.
Any ideas?
Hi Mollie,
We had a recent discussion on the same issue. Please visit this link and follow the instructions in James.Orr.
Let us know if you need more information.
Kind regards
-
Hello! I installed win7 professional and upgrade to ultimate and when I play a music or vdo sound is coming from the speaker and the headphones. I have a 3ghertz Pentium 4 with 1 GB of ram, and it runs the 32-bit version. And also the headphone option is not present in the peripheral reading option.
Can any1 please please help me?We consider that your machine uses Realtek HD audio-
(Older versions of Realtek HD audio drivers may have a slightly different form, but the)
basics should be the same).There are two ways to set up the helmet when it is plugged into the façade decision-making;
(1) in Realtek Manager of her go to Advanced Settings feature in the upper right of the window.
Check the circle next to cut... plugged back.
When this fact was you must also click on the yellow folder icon below the
Device settings advanced and check 'Disable protection of jack façade' is clear.
-Of the drawbacks of this method are that you do not get an option of separate settings for headphones.
then they use the same environment as your speakers and EQUALIZER settings, but you can use both the
speakers and the headphones if you wish.
-Note that with this option, the helmet does not show in Sound Manager window.(2) advanced settings in the sound Manager go to Realtek device.
The check box next to do advance... at the same time.
This will disable the speakers when headphone is plugged in the socket of the façade,
and return to the speakers when headphones are disconnected.
Also check one or more of the boxes below, according to your need.-With this setting, there is an option for headphones in the two Windows Sound manager
and Realtek HD Audio Manager.
-With this setting, it does not matter which option to use in yellow folder as the setting icon
is ' either / or '. You cannot run at the same time the speakers and headphones.-Note that with games the headset must be connected prior to spear the game, or
the default set to the speakers. -
How to divide different my speakers and headphones to two playback devices
I recently bought the headset and when I plugged yesterday, they worked exactly as I wanted. Sound kept coming through the speakers only and I have only the voice through my headset (voice of my chat software).
Turn on my computer this morning, however, speakers and headphones were grouped in one reading "Speakers/headphones" and plug the headset would replace the speakers and play all the sound in the headphones. The helmet is always displayed as a separate device, 'Helmet of Communication', and test it still produces sounds in the headphones.I would like to know how to divide the headphones and speakers, so they work as two devices separated again.It depends on your sound manufacturer and if they have channels separated, programmed for the lines of the map.
-
Original title: audio disturbances
Hello
I use lenovo T420. with windows 7 32-bit and processor intel core i7.My speakers and headphones produce distortion whatever I play (music, videos, sound system)I ve recently spilled water on the keyboard water resistant but I don't know if it has anything to do with it.Kind regardsMalik MajaliHello
Method 1: Run the following fix - it:
Diagnose and automatically fix problems of Windows audio playback:
http://support.Microsoft.com/mats/AudioPlayback/
Method 2: Uninstall and reinstall the audio card drivers.
See the following steps:
(a) click Start, right click on computer.
(b) click on properties, click on Device Manager
(c) expand sound, video and controleurs controllers game, right click on the wireless adapter option
(d) click on uninstall
(e) now go to your computer / site Web of the manufacturer of the device, download the updated drivers and install them.
Updated a hardware driver that is not working properly:
http://Windows.Microsoft.com/is-is/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
-
Headphones not detected, but playing the speaker and headphones.
I have a hp laptop Pavilion g6-2231tx with windows 8. My speaker works fine, but every time I plug in my headset it detects not she but the audio comes from speaker and headphone.
I have already uninstall the driver and re-installed but it does not work for me.I'd appreciate really any notice about it.I have to return my laptop to hp (still under warranty). HP said is it a hardware problem and replace equipment.
It's corrected now.
-
At the same time audio playback through speakers and headphones
When I plug in the headphones the sound plays on both speakers and headphones using Pandora and the music app, as well as during phone calls.
What brand and type of headphones do you use? There a switch on the headphone cable? It's a Beats Audio headset? If yes try to switch orders online for this problem, because it is a known issue.
-
USB recording speaker both micro and headphones headset
Windows 7 Pro 64-bit, SP1
Adobe CC 2015
Motherboard: ASUS Maximus VII formula
I have a Logitech USB headset. I make voip calls and must record the conversations.
It doesn't seem to be a sound driver that allows the microphone and headphones to send two signals to the input record.
It will only record my voice and not the other person.
Is there a way to do this?
Thanks in advance.
Audition records only what it is to be delivered by your computer - it is not taking part in the delivery of the signal which is determined by your audio system and pilots. Different have different capabilities for what he can send to the recording software. I was looking on the audio control panel, Windows or any special panel for the Logitech headphones and see if there is no option that you can play with the option - I can't be more specific without the hardware and drivers that you even.
I have to do just occasionally, a similar record in my case via Skype. If you use also Skype, I can recommend Free Skype Recorder of recorder Record with iFree Skype Recorder - your FREE Skype software call Skype calls it works fine for me and gives me going and audio mic in separate, channels which can then be opened in Audition for editing. If you use other VOIP services, it's probably worth looking for a similar application for these programs.
Maybe you are looking for
-
Where can I find my antivirus software
Where can I find my antivirus software
-
What is the recommended method to transfer data files from my pc to my Lenovo IdeaPad K1 internal storage space?
-
I live in Germany where - almost all of the computers on the market have windows installed in German. Is it possible to buy a laptop with MS vista in German installation and when I update, I upgrade to the English version of Windows 7?
-
Mouse pad allows movement, but will not send any information on HP A6 portable Vision
Mouse pad allows movement, but didn't take information about HP A6 portable Vision. My mouse pad is coming but by trial and error, she exploded when you touch the circle back on the pad, but now it moves, but still blank. I can move it, but I have to
-
Hi, Ive turned on my laptop and this box appeared. There is also another what I can do to become really boring and everything seems to work ok.