Z410 liquid no dual speakers when you play music?

Similar Questions

• Intermittent buzzing sound when you play music, movies, games...

  Since installing Windows 7 Ultimate, I have a problem with intermittent gurgling noise whenever something works on my laptop that has audio. The sound occurs approximately every 20 seconds maybe and finally a second about. It also distorts / breaks, so to speak, the image when playing a movie. The problem occurs if the audio is played through the speakers or headphones. It is also that the film / audio etc video stored on a CD/DVD or hard disk or online, so I know that's not the problem.

  I uninstalled and renistalled my drivers sound card and graphics, looked after that I have the latest drivers, updates DirectX, updated my BIOS etc, but nothing worked.

  I have Windows Vista Home Premium, which is preinstalled on the laptop when I brought last April. I did not have this problem on Vista.

  My laptop is a Toshiba P300D, 3 GB of RAM, Windows 7 Ultimate (32 bit), which was a clean install.

  Any suggestions?

  Thank you

  Hey all

  I had the same problem with intermittent noise. After sending two times my toshiba satellite L750D to get fixed by the store where I bought it (they could not find the fault), I found that the hum is not meeting when wifi is disabled. So I updated the driver for my AR9002WB-1NG Atheros network card and it works perfectly now.

  It is the page Toshiba with the Wireless LAN Driver Downloads for all types of network cards. http://APS2.toshiba-tro.de/WLAN/?page=downloads

  Hope this works for others!

• 12.5.1 iTunes crashes when you play on AirPlay

  Hi all...

  Since the 12.5.1, update any when I play music over the airtime to one of my devices AirPlay after ten minutes or so, iTunes hangs on my iMac. I have had three accidents on three times when I played the music in this way, since the update.

  Of course, I could use some advice on how to approach this. It is even possible to go back to my old iTunes?

  Furthermore, I played music over airtime all the time before the update with iTunes ever crashing. In addition, a few anecdotes:

  • iMac is connected to an Airport Extreme via Ethernet
  • Airport Extreme is plugged into an Ethernet hub
  • The Airplay device is a Pioneer receiver, connected on the same hub Ethernet (two different Pioneer receivers in two different places)

  Here is a (partial) example error log:

  Process: iTunes [39786]

  Path: /Applications/iTunes.app/Contents/MacOS/iTunes

  ID: com.apple.iTunes

  Version: 12.5.1 (12.5.1)

  Generation information: iTunes-1200012005001021 ~ 2

  Code type: X 86-64 (Native)

  Parent process:? [1]

  Manager: iTunes [39786]

  User ID: 502

  Date/time: 2016-10-03 10:14:49.890-0700

  OS version: Mac OS X 10.10.5 (14F1909)

  Report Version: 11

  Anonymous UUID: 35DF2678-532B-1D2F-1491-16D61A122FC0

  Sleep/wake UUID: 324107AB-D38A-4827-949C-D31B2B520523

  Time since started awake: 5600000 seconds

  Wake time: 580000 seconds

  Crashed thread: queue main iTunes shipping 0: com.apple.main - wire

  Exception type: EXC_CRASH (SIGABRT)

  Exception codes: 0 x 0000000000000000, 0 x 0000000000000000

  Request for clarification:

  Abort() called

  Error object 0x7fa85be0de00: pointer being freed was not assigned.

  Crashed thread 0: queue main iTunes shipping: com.apple.main - wire

  Hello Brent,.

  Thank you for your participation in the communities of Support from Apple.

  I see that iTunes is leaving after an update when you play songs to AirPlay devices. Let's try some troubleshooting steps to help isolate and resolve the cause of the error.

  If you haven't done so already, don't forget to restart your network devices and receivers of the AirPlay. For AirPort Extreme, I suggest a "soft reset" for now as mentioned in resetting an airport station base FAQ.

  Then try the AirPlay test in safe mode and a new account on your Mac user. The following steps can help to eliminate software conflicts in your user account and can give us an indication of the additional troubleshooting steps to try then.

  You can use this Support article as a guide to complete both of these steps-How to test one question in another user on your Mac account.

  When it comes to tests in a new user, you need to import a few songs in iTunes for testing library. Here are some links to help with the signing in music Apple or download past purchases:
  

  Download your latest purchases

  Turn on iCloud music library

  Best regards.

• When you play Farmville, I keep getting warnings about moving to a safe place in a non-secure site, how to turn off these warnings?

  When you play Farmville, I get the warning that I'm leaving a non-secure secure website. This warning is very irritating and seems to interfere with messages from Farmville. How to disable this warning?

  Try turning off the secure connection to Facebook.

  • https://www.Facebook.com/settings?tab.../Settings?tab=security & section = Browsing & t

• When you play a game something pops up

  Hello

  When you play a game something pops up and I agree Yes to get rid of him.
  But now my keyboard does not work on my laptop satellite.

  Any help is very appreciated.

  Hello!

  Sorry, but boyfriend so that we can help you t.
  How do you think about this?

  Well, please post an accurate description on the windows which were displayed. Maybe you can post a screenshot?

  And what Satellite phone and OS are you using?
  This happens in all games?

  As you can see, you should put more information.

  Good bye

• New Satellite L50T-A196 is overheating eapecially when you play

  Hello

  My Satellite L50T-A-196 stop only after overheating, especially when you play (for example, civilization 5 or Football manager 2014). This occurs during the use of the normal laptop.

  I'm not blocking the fans; in fact, I always lift the laptop in order to ensure that they are not blocked.

  What I ve realized that I also installed NVIDIA and Intel graphics cards, and I can't make the NVIDIA one by default. I don't know if this is related to the issue or not m.

  Any help would be appreciated.

  > What I ve realized that I also installed NVIDIA and Intel graphics cards, and I can't make the NVIDIA the default

  It's very easy.
  Right click on the desktop and select Nvidia Control Panel
  In Nvidia Control Panel on the left choose 3D-> set PhysX configuration settings

  Now in the main window, select a PhysX processor you can choose between Nvidia Gforce, Intel GPU (part of the CPU) or Auto Select.
  In case you want to use only nVidia GPU, choose Nvidia Gforce
  In case you want to use only Intel GPU, choose CPU
  Apply the settings

  Then click on manage 3D settings and here in the main window, you will see two tabs: global settings and the settings of the program.
  In the global settings tab, you can choose the favorite graphics processor.
  In the program settings tab, you can choose the GPU for a single application. For example, you can choose the GPU to be used while playing a special match.

  Hope this helps to choose the right GPU and to avoid overheating.

• Problems of keyb/mouse on A30 - 921 reactions when you play

  OK, pretty much since I have received this laptop I had a problem with the keyboard or mouse when you play. Everything works very well, and adults in general unless you're gaming.

  The keys in the game (say HL, HL2, Quake II, GTA, etc) are used to 'paste' in a direction for a second or more, or they have a slow reaction, as with mouse clicks. You could be market forward on the left and then hit to walk upright, but he would continue to walk forward and left for an extra second or two and then go right. I formatted the computer with the recovery disc and the error remained. I then formatted with my own clean copy of XP pro and the problem is STILL there, it must be linked to the material and not related to the software. I even tried an external USB keyboard and he did the same thing.

  I have a feeling that its to do with the use of RAM or CPU, but can't be sure. The laptop is a Toshiba Satellite A30-921, and the shared video memory chip RAM - the video is an ATI Radeon 9000 Mobility. You can choose to use 64 MB of RAM or 128 MB of RAM, the two are still the problem.

  I am at my wits end with this, because the problem causes a lot of grief when playin fast movement of the FPS. I tried to email Toshiba and they just told me to ring customers, and I don't think they won't be of any help. Its really annoyin me since I've had this laptop partly for the reason of the game.

  If someone has an idea, it would be much appreciated.

  Specification of the laptop:
  Toshiba Satellite A30 921
  Intel Pentium 2.8 GHz processor
  512 MB OF RAM
  ATI Radeon 9000 Mobility (UMB shared 64 MB or 128 MB)
  40 GB HARD drive
  FireWire/LAN etc.

  Thanks for any help guys.

  Hello

  I asked my friend on his opinion because he is a maniac in the game what he thinks about. This laptop you is certainly not a game machine, he said. You must set the graphics settings. HL and Quake II should in his work but HL 2 has to complex graphic applications and it will not work properly.

  Good bye

• Qosmio X 500 - blue screen or system crash when you play

  I have problems with my new laptop.
  The laptop is a week and I get frequent blue screen errors and system crashes when you play.
  At this time I only tried to play a game: World of Warcraft.

  I have run on:
  The original that came pre-installed graphic drivers.
  The latest updated drivers from the Web from Toshiba site.
  The latest drivers for laptop on the Nvidia site.
  I also removed all the drivers and allowed Windows update to find it's own who have a different version again.

  In these four cases, drivers seem to work fine for a while, but will eventually stop responding and the system crash when I start to play a game.
  It happens shortly after the start of a game and other times it can happen after a few hours of game play.
  Sometimes it will result in a blue screen, sometimes the game will change from windows with the error message on the display driver does not.

  I also did a clean installation using my own copy of Windows 7 with the amount of the absolute minimum of software installed to rule anything that might cause a conflict which was preinstalled.

  I also tried to run to run the game in compatibility mode, although I had no problem with my laptop last run the game in Windows 7.

  The windows event log always indicates a problem with the graphics.

  Did someone else has similar problems or found a solution?
  For a laptop that is announced for the game, I would have thought that this kind of thing would not be a problem.

  Hey,.

  In my opinion, it has something to do with the display driver or the graphics card itself I always use the most recent display of the official website of Toshiba (NOT nvVidia) driver because they are pre-tested. If you install the latest driver from Toshiba.

  After this also make sure that you use the latest version of the BIOS. You can download on the official website of Toshiba too.

  I put t know how long you have your laptop, but it should be cleaned from time to time (3-4 months). Therefore, you can use jet of compressed air to blow off the dust.

  Check it!

• How much bandwidth/DOWNLOAD + download using xbox 360 when you play online?

  When you play COD mw2 for example, how much bandwidth is xbox 360 use? I have a download limit so need to get out.

  Thank you in advance!

  Hello

  1. what operating system do you use?

  It depends on the online games you are using, I suggest you to contact Xbox support center

  http://forums.Xbox.com/

  http://support.Xbox.com/en-us/pages/default.aspx

• All computer crashes when you play Roller Coaster Tycoon 2 (Blue Blue without seeing screen?)

  When you play Roller Coaster Tycoon 2 , my laptop Toshiba Satellite A215-4757 freezes (sometimes after about half an hour, or sometimes less than 5 minutes).  The game has worked until I upgraded to Windows 7 Home Premium 32-bit (earlier version of windows: Vista Home Premium 32-bit .)  As far as I know, all my drivers are updated and regular, programs such as Firefox and Outlook will work perfectly.  I'm not sure my other full-screen games, as I have not tried to play them again.

  I have the game in compatibility mode for XP SP2, but before that I did, the same error occurred.

  The error when I finally force close and turn on the computer named blue screen (although when the computer froze, there was no blue screen, just the image of the frozen game, and the sound was still running like nothing happened.)  I don't remember the other information contained in the error.

  Chronology of the error:

  • I opened the game and it loads fine.
  • I go through the menus and select the park that I want to play and it loads fine.
  • I'll be working or seeking / everything I do at the Park, when suddenly it freezes.
  • I turned off the computer and turn it back on.
  • Startup takes a little longer than normal.
  • Windows opens the error message (which I don't remember the details.)

  More precisely what I mean by freeze (obvious, maybe, but just try to be specific as possible):

  • No mice.
  • Without ctrl alt del ability.
  • No capacity alt tab.
  • No windows key capability.
  • Necessary to force to stop with the button on the computer.

  Any suggestions?  Also, I'm not sure what other information you need to know, so if there are more details, just ask.

  Thank you.

  Hello coasterfreak220,

  Unfortunately, Roller Coaster Tycoon 2 is not compatible with Windows 7. You must have the Windows xp mode in order to install and run it.

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BSOD on dxgmms1 when you play using 8 GB of ram. Solid running 4 GB.

  Hi all I just built a brand new when computer a new installation of Windows 7 Edition Ultimate 64 bit. This computer has never had any other OS on it. I'm having a problem when you play Dragon Age Origins that the computer with BSOD when I have 8 GB of ram in the computer. With only 4 GB, the computer is solid as a rock. I tested the ram in Memtest86 from one day to the next without any problem. I tried different sets of 4 GB and they all work very well. The problem is when I try to use 8 GB. My computer has the following: AMD Phenom II X 4 965 8 GB OCZ Black Edition DDR3-1600 Card Gigabyte mother XFX Radeon 5870 1000W Corsair PSU I think that are the most important elements. I have installed all Windows updates, have the latest motherboard bios and the latest video drivers. Here is the log of the events of an incident: ---------------------------------------------------------- Bucket of X64_0xD1_dxgmms1 Fault! VidSchiUpdateContextRunningTimeAtISR + 9 b, type 0 Event name: BlueScreen Answer: No available Cabin ID: 0 Signature of the problem: P1: P2: P3: P4: P5: P6: P7: P8: P9: P10: Attached files: C:\Windows\Minidump\111109-31886-01.dmp C:\Users\jason-Windows 7\AppData\Local\Temp\WER-55567-0.sysdata.xml C:\Users\jason-Windows 7\AppData\Local\Temp\WER9F7D.tmp.WERInternalMetadata.xml These files are available here: C:\Users\jason-Windows 7\AppData\Local\Microsoft\Windows\WER\ReportArchive\Kernel_0_0_cab_0c38c5a3 Symbol of the analysis: X64_0xD1_dxgmms1! VidSchiUpdateContextRunningTimeAtISR + 9 b Recheck for solution: 0 Report ID: 111109-31886-01 State: 0 ---------------------------------------------------------- Here are the. File WER referenced in C:\Users\jason-Windows 7\AppData\Local\Microsoft\Windows\WER\ReportArchive\Kernel_0_0_cab_0c38c5a3 the event log: ---------------------------------------------------------- Version = 1 EventType = blue screen EventTime = 129024579011717023 ReportType = 4 Consent = 1 UploadTime = 129024725622324900 ReportIdentifier = 0262d 554-cf1f-11de-b20c-00241dc2d592 IntegratorReportIdentifier = 31886-111109-01 Response.Type = 4 Response.AnalysisBucket = X64_0xD1_dxgmms1! VidSchiUpdateContextRunningTimeAtISR + 9 b DynamicSig [1]. Name = OS Version DynamicSig [1]. Value=6.1.7600.2.0.0.768.3 DynamicSig [2]. Name = locale ID DynamicSig [2]. Value = 1033 UI[2]=C:\Windows\system32\wer.dll UI [3] = Windows has recovered from an unexpected shutdown UI [4] = Windows can check online for a solution to the problem. UI [5] = & search solution UI [6] = & check later UI [7] = cancel UI [8] = Windows has recovered from an unexpected shutdown UI [9] = a problem caused Windows to stop working correctly. Windows will notify you if a solution is available. UI [10] = close S [0]. Key = BCCode S [0]. Value = d1 SEC [1]. Key = BCP1 SEC [1]. Value = FFFFF8800913CC88 SEC [2]. Key = BCP2 SEC [2]. Value = 000000000000000B SEC [3]. Key = BCP3 SEC [3]. Value = 0000000000000000 SEC [4]. Key = BCP4 SEC [4]. Value = FFFFF88005DAB0EB SEC [5]. Key = OS Version SEC [5]. Value = 6_1_7600 SEC [6]. Key = Service Pack SEC [6]. Value = 0_0 SEC [7]. Product key = SEC [7]. Value = 768_1 State [0]. Key = transport. DoneStage1 State [0]. Value = 1

  
  State [1]. Key = CA
  State [1]. Value = 1
  State [2]. Key = BLOB
  State [2]. Value = CHKSUM = 0A161440B38C3DB750EC07F75B8FBB6B; BID = OCATAG; ID = 14e49d0d-1f59-4b1a-8b1e-526cd578a2b2; VOID = 11/11/2009 20:09:27
  File [0]. CabName = 111109-31886 - 01.dmp
  File [0]. Path = 111109-31886 - 01.dmp
  File [0]. Flags = 851970
  File [0]. Type = 2
  File [0]. Original.Path=C:\Windows\Minidump\111109-31886-01.dmp
  File [1]. CabName = sysdata.xml
  File [1]. Path = WER-55567 - 0.sysdata.xml
  File [1]. Flags = 851970
  File [1]. Type = 5
  File [1]. Original.Path=C:\Users\jason-Windows 7\AppData\Local\Temp\WER-55567-0.sysdata.xml
  File [2]. CabName = WERInternalMetadata.xml
  File [2]. Path = WER9F7D.tmp.WERInternalMetadata.Xml
  File [2]. Flags = 589827
  File [2]. Type = 5
  File [2]. Original.Path=C:\Users\jason-Windows 7\AppData\Local\Temp\WER9F7D.tmp.WERInternalMetadata.xml
  File [3]. CabName = Report.cab
  File [3]. Path = Report.cab
  File [3]. Flags = 196608
  File [3]. Type = 7
  File [3]. Original.Path = Report.cab
  FriendlyEventName = Shut down unexpectedly
  ConsentKey = blue screen
  AppName = Windows
  AppPath=C:\Windows\System32\WerFault.exe

  ----------------------------------------------------------

  Any help would be greatly appreciated!

  

  Hi Shaxs,

  I suggest you to perform a clean boot and see if all the third-party applications is in conflict with the performance of the game.

  To perform a clean boot on a computer that is running Windows 7, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.Microsoft.com/kb/929135

  In addition, refer to the section on how to restore your computer to a Normal startup mode

  I also suggest you access the link below and read the MazterZz solution for a similar problem and see if it can solve.

  http://social.technet.Microsoft.com/forums/fi-fi/w7itproperf/thread/dc1e03c0-1cc0-4878-b943-cf4687d9b4b5

  The user in the link above rectified the mistake by uninstalling Xeno NIC. If by chance you have the same NETWORK card, you can try the above resolution and see if that fixes the problem.

  Let us know for any further assistance

  Concerning
  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• When you play call of Duty Modern Warfare 2, I get the 1000008e error code.

  original title: Windows crashed when you play the game

  I got error when playing in game:

  Error code 1000008e c0000005 parameter1, b53137f4, parameter3, parameter4 00000000 a561a424 parameter 2.
  Error ID: 1003

  It was happen every 30 minutes and 1 day

  I had Windows XP SP3, Phenom x 6 and HD 6450 on my old PC

  Phenom x 4 and ATI HD 6870 and Win 7 Ultimate edition

  Surprisingly, I can run MW2 without accident in my old PC for two days!

  Hello

  It seems that the issue could be with the file to install the game. I suggest you to uninstall the game and then get the new installation disc. Reinstall the game using the new drive and see if that fixes the problem.

  I suggest you to check with the game support Men of War for more information.

  http://www.menofwargame.com/support

• ACER ASPIRE E15 E5 - 571G does not charge when you play.

  Acer aspire e15 e5 - 571 g. When I play games with the plugin from HQ. It suddenly stopped charging. Power and charge LED flashing LIGHT. and when I try to play without battery only HQ of the laptop is suddenly shutsdown. but when normal im use fees normally. Please, someone knows how to solve this problem.

  It is not do immediately, but after you've played for a while right?

  You use a lot of battery power and charger heat when it loads at full power

  For a long time. As it is too hot it starts decrease amount of current continuous puts it.

  What you see is the default of shipper. You must find a way of cooling of the device when you play for a long time. You can also get a new charger. It wouldn't surprise me if that one has already suffered some damage. Not getting does not load can also damage the laptop.

• When you play in Facebook, I got a "GATEWAY TIMEOUT 508" error after it didn't load right now!

  When you play in Facebook, Farmville game, it didn't load right away once or twice, then I got a message that says "ERROR GATEWAY TIMEOUT 508!"

  Hello

  1. have you made changes on the computer before this problem?
  2. what browser do you use?
  3. What is the exact error message?

  If you use internet explorer, then this article might be useful.
  The problems of games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246

• When you play FarmVille, my computer crashes or I get a notice that "bits have been lost" and refresh the page... usually don't work and I have to start all over again.

  When you play FarmVille, my computer crashes or I get a notice that "bits have been lost" and refresh the page... usually don't work and I have to start all over again.

  I think that there is a prob with this game, it does not matter if you use firefox or IE. Or another browser. It blocks something. Or causes probs.

  FB needs to fix it. There are a lot of people (in a Google search), who are having probs. One way or the other