Z500 Bluetooth cannot detect the sound bar

Similar Questions

• Why are the videos muted - with the sound bar to the max and my prefs system with the sound upward?

  I click on a link to a YouTube video, and plays video without the sound. I have check the sound bar and he is not silent. I put the sound to the maximum, still no sound. I check my system preferences and the sound is in place.

  Hey lejohnson,

  It seems that you have already tried a lot of things. Have you looked at the article what to do if Firefox will play all of the sounds? There is useful information there and links to a few other articles that may help.

• iPhone 5 c cannot detect the network.

  Since the last 9.2.1 update my iPhone 5 c cannot detect the network.  Constantly 'finding '.  It took to the local repair shop and he told me the imei is missing and only Apple can help.  Any ideas, thank you.

  A missing IMEI is a fatal error which cannot be set. This is usually the result of the attempt to jailbreak or hack the phone unlock illegally, but not exclusively.

  Where, exactly, do you have the phone? It was jailbroken? Never 'unlocked' by one person other than the carrier, so it was initially locked?

• MAX cannot detect the TPC-2106 t

  don't know if this is the right place to post this but I had to ask the question

  I t TPC-2106 touch panel and want MAX detec there, but it will not for any reason any

  I have the touch panel module and the touch screen is correctly connected to the network that my computer as well

  MAX can detect my compactrio, but it cannot detect the touch screen...

  Someone has an idea?

  Thank you

  Browse the following documents and after if you have other questions.

  LabVIEW Touch Panel Module Getting Started Guide for LabVIEW

  Getting started with National Instruments Touch Panel computers using LabVIEW

• computer cannot detect the scanner or camera

  When I plug in my digital camera Canon for my xp, then turn it on, I hear a small beep, then nothing. When I go into the Panel, printers and other equipment, scanners and cameras, I see 2 points. 1 is, WIA Canon MX310 SER. The 2nd one is Canon PowerShot SD1300IS. I then click on the Canon PowerShot SD1300IS and then get pictures, but nothing happens. The cameras screen display turns off, but that's all. It seems to be connected to the computer, but not to download pictures.

  When I keep trying I sometimes get an error message, the computer cannot detect the scanner or camera.

  How can I solve this problem and download my photos?

  Thank you Tim

  Hey volunteer J;

  Thanks for the help, but it did not help.

  I found the answer on page 2 of microsoft answers, xp, images and videos.

  6 questions down, how to re install microsoft scanner and Camera Wizard.

  It turns out that some tech volunteer known as J (is it you?} came across the solution to my problem on this site:http://www.veiled-chameleon.com/weblog/archives/000231.html )

  I have used PC Cleaner on this xp, and I think he may have disabled some of the registry keys. For me, I had to start my pitcher of DCOM Server, RPC, Remote procedure Call Locator process and put them on automatic. Once I rebooted, everything works great.

  I'm so happy that tech Volunteer J, done everything search last December. I bet it helped a ton out of veterans with our cameras. How did he find veiled Chameleon? Wow he must be smart enough.

  Thank you for volunteering j. (is it you?)

  Thank you Tim

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something

  
  

• installation stops with a "cannot detect the last level cache.

  ESXi 5.0 installation process stops with a message "cannot detect the last level cache.

  VMware ESXi 5.0.0 [Releasebuild-469512 x86_64]
  Cannot detect the last level cache
  CR0 = 80010039 cr2 = 0 x 0 = 0x3e7000 cr4 = 0 x 2038 cr3
  PCPU0:2048 / bootstrap
  PCPU 0: S
  Beginning of the code: uptime VMK 0 x 418013200000: 0:00:00:00.890
  6 lines of < no symbol > errors
  Basic FS = 0 x 0 gs = 0 x 418040000000 kg = 0 x 0
  No space on disk for the dump data.
  Debugger waiting...

  switching LSI based SAS controller to port sata3 onboard has not changed a thing

  Oh, here the specifications:
  Processor Intel i5 2500
  16 GB OF RAM
  ASUS P8H67-M Board

  any ideas?

  Hi all

  I had the same problem after turning on in BIOS "Max CPUID Value Limit" to activate option.

  Disabling above option help me to install vmware esxi 5.0

  Anatoliy

• Cannot find my sound bar remote

  Can I use the settings on the sound bar? I have a Sony 2.1, will a universal remote work with it?

  Sony model SA-CT260

• Does not DETECT THE SOUND CARD / laptop INSPIRON 1501

  I have an INSPIRON 1501 laptop and have had problems with the sound for some time. When I watch movies, the sound is there. When I Skype, I can hear, but the other party can't hear what I'm saying. Skype can't detect sound card.

  What I've done so far:

  I went to control PANEL and then MANAGER of DEVICES, OTHER DEVICES. Here, I have only one BASIC DEVICE SYSTEM option with a yellow sign. I right click on properties, then under GENERAL clicked REINSTALL DRIVER, but Windows could not find driver software.

  I also tried option SOUND, VIDEO and GAME CONTROLLERS in the DEVICE MANAGER. There is only one HIGH DEFINITION AUDIO DEVICE option and it is not marked.

  Advice I have to install find the sound card.

  Thanks for all your advice beforehand.

  Thanks again for the support.
  So, it is possible that the problem lies in a loose plug?

  Off topic:

  When I turn on the PC, before Microsoft logo appears, I get the following message:

  WARNING: The battery cannot be identified. This system will not be able to charge this battery.

  Press any key to continue

  Press F2 2 times to enter SETUP

  Press F12 and any key to enter Boot Menu

  What is the problem and how can I get rid of this message?

• Satellite L450 - 173 BIOS cannot detect the HARD whil eLinux disc that ubunto can

  I have a Satellite L450 173.
  The system will display a failure while trying to detect the hard drive then cannot boot from the hard drive.

  However, it can boot from the CD and install ubunto 11.04 (with barrier).
  However, after the success in the installation process, the system cannot start...
  Is this a Bios problem that require an update?

  Hello

  * Question: *.
  Either classified and recognized in the BIOS HARD drive?
  On the first page of the BIOS disk HARD should be listed with details such as the name and the size of the HARD drive.

  If his list, then you must run a HARD drive test. You could test the HARD drive by using a freeware tool called Drive Fitness Test.
  This tool is free and can be downloaded from different pages
  To do this, and if there is error, it means that your HARD drive is malfunctioning.

• Cannot detect the webcam

  Hello, I have been using this machine for the past three years on Skype and video chat worked well. All of a sudden it says it cannot detect a webcam (its a webcam integrated), but I have used other sites to make sure that it works. I have closed Skype and restarted it and many other things. What can I do? It is the only way of me and my fiance can meet that I need a quick fix.

  bkeller1451 wrote:
  

  Dxdiag

  I suggest to try with the older version of Skype 6.14.0.104.

  Uninstall the version 6.16 and install the 6.14.0.104 version:

  http://download.Skype.com/MSI/SkypeSetup_6.14.0.104.msi

• Satellite 1700: Windows cannot detect the CD Rom drive

  CD drive on my laptop Satellite 1700 working under Windows. Windows cannot detect, but it works very well in mode cd player.

  Hello

  I have a question.
  Your drive is missing from the 'My computer' zone or the Device Manager displays a disk error?

  If the drive can be recognized in the BIOS, so I guess that the entries in the Windows registry are damaged or not right.
  I found this Microsoft Knowledge base and I think he should solve your problem.
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;320553

  Please check and after if it succeeded.

• Satellite L300D cannot detect the wireless printer

  Bought an advent AW10 wireless printer that is connected to my router from sky.
  The laptop cannot detect if. I managed dected on netbook to my daughter so I know this isn't a problem with the printer or router and I also tried detect it with the firewall disabled to rule out the possibility of being blocked.

  Does anyone have other ideas?

  The interest to buy this printer was so that it can be connected wireless to want do not connect through a USB cable.

  Hello

  Have you turned on the WiFi on the laptop Toshiba successfully?
  You must move the switch wireless POSITION until led WLan would be on and must use the FN + F8 option to select Wlan.

• EliteBook 6930p: elitebook 6930p BIOS cannot detect the wlan.

  Hello, after that new bios update ATI F.20 my laptop cannot detect wlan. In the bios it shows no. DAMAGE. Please help me.

  Hello @KipsasLTD

  Thanks for posting on the HP Forums.

  To get your question more than exhibition I suggest you post in the trade forums since the Elitebook 6930p is a commercial product. You can do so here: laptop - HP ProBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE

  Support of your product page can be useful in the meantime: HP EliteBook Notebook PC 6930p

  I hope this helps!

• ACER Travelmate 5760 with Windows 10, cannot detect the external projector

  I have an ACER Travelmate 5760. I have upgraded to Windows 10, because Microsoft is launching a few checks and said that I would be able to upgrade. But now, the laptop cannot detect an external projector or monitor. Is there a driver that I need to improve?

  Thank you

  Winifred

  When you connect your projector, if you press the windows logo key + p, are you able to select expand and check if the projector work?

  also, if you right-click on your desktop and choose the settings display, is the acknowledged projector?

  How to connect the projector?

  on the drivers, you try to uninstall the real Intel VGA driver and reboot with your laptop connect on the web and let windows update find new drivers as appropriate.