Cannot find my sound bar remote

Similar Questions

• Skype cannot find my sound card

  Skype cannot find my Sound card - when I run the test of the Echo - it I heard say 'Hello' then it dies.

  I have a brand new Thinkpad (T420), Windows 7, internal camera and microphone, Windows loaded all drivers.

  I tried to find the communication helper.exe someone suggested, disable it - can't find it.

  I hope someone can help!

  Thank you-

  Sorry - it took me a while to get to try everything.

  I tried all that and it didn't work.  Then I found the 'Lenovo' tools/help - no matter what and let this process of updating everything, and now it works.  I'm guessing it drivers that needed to be updated, but I'll probably never know.

  I wonder now if I have to go back and "A" check that you have suggested, although it works.  It doesn't seem to be a good idea to allow applications to take control of my speakers and microphone - but I do not know!

  Thank you!

• Z500 Bluetooth cannot detect the sound bar

  I am currently on Windows 8.1 and have updated my driver for Atheros AR3012 v8.0.1.300 BT.

  Now, I could not even detect the sound bar. Before the upgrade, I could detect but not connect.

  8.1 Windows SUCKS!

  Can anyone help?

  Updated my drivers again and it works!

• In Windows NT Workstation 4.0, I get this error message: cannot find the sound card with this port number. Please check your settings and try again. Any help?

  There is this computer that I recently installed Windows NT Workstation 4.0 on and I would like to know how to install sound blaster 16, on this without receiving this error message. If someone wants to say how it is obsolete or install a new operating system, please do not post. Thank you. If anyone has the same issue on an ordinary pc or Virtual PC, you can publish. It is a computer. If you're going to say how microsoft does not support, I need to install a better operating system or the above mentioned inconvenience or something similar to those, please do not post. Any help will be appreciated. The specific sound card is Creative Labs sound blaster Pro 16 of 1.x.

  Hello Grant Heckel,

  Windows NT Workstation 4.0 is not supported in the Microsoft Answer forum.

  You can do a search on the internet and find information about the Sound Blaster Pro 16 and NT 4.0 Workstation.

  Such a thread is listed below:
  http://www.pcguru.plus.com/VirtualPC.html

  Sincerely,

  Marilyn

• cannot find the host bar at the top of the screen

  has obtained a new hard a drive can't seem to find the bar of the organizer who has used to be at the top of the screen, but is no more. not the bar gadgets that got him.

  has obtained a new hard a drive can't seem to find the bar of the organizer who has used to be at the top of the screen, but is no more. not the bar gadgets that got him.

  Reference Dell Dock:

  http://www.DellDock.com/

  If it is above > look in the start menu > programs > software Dell > Dell Dock > or re-download.

  If another brand computer > look in their software > under start > programs.

  See you soon.

  Mick Murphy - Microsoft partner

• I've looked all over the site and cannot find Norton Tool bar 2013.1.3.1. This is the version of said Norton will work with Firefox 16.

  The search for the correct toolbar. Contacted Norton and the bar we need is 2013.1.3.1 and it is not listed in the extensions.

  Hello, please update your product to the latest version norton - refer to the
  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=kb20100720113635EN_EndUserProfile_en_us & Product = Home & PVID = f-Home & version = 1 & LG = in & CT = US

• Cannot find an icon or a shortcut of the volume on the desktop

  Cannot find the volume bar in the screen

  Click with the right button on the taskbar, and then select Properties. Click on Notification area, put a check mark in the Volume.

  Some computers one bar of volume on the desktop by pressing the key Fn and PREVIOUS Page or Page Dn.

• Satellite A665 - 12K: BT does not work - cannot find the remote service

  Hello!

  Help solve the problem,

  Computer laptop A665 - 12 k connected via bluetooth devices, bluetooth Manager finds the device, but do not connect it gives an error 'Cannot find the remote service' before you reinstall windiws solved similar problems 7. Did you reinstall driver broadcom, resettlement (ver.8, ver.9) bluetooth stack, clean the registry, windows 7 the relocation does not contribute to what either.. .Please help!

  Hello

  I recommend you to check the services that are running in the background.
  The point is that if BT service is not running or is not enabled, the BT connection cannot be established.

  To check the service appointment on: Control Panel-> administration-> computer management tools
  or you can directly open the Services' list by typing services.msc command in RUN or Start Menu search box.

  No, you will get a list of available services. Search for services called Bluetooth and activate this service by double-click a service and select the option you want.

  Then try to reactivate the BT using the FN + F8 key combination

• RT: Remote desktop says "cannot find a device suitable for C drive.

  Hello

  There is a french position on exactly the same topic, but I can't apply the solution given here.

  My problem is this: I have a remote, ready to work as a target RT Office. It has been verified for compatibility, the hard drive has been formatted to FAT32, it was found by my host and received a static ip address. I installed the software, I need (LabView RT 9.0) using MAX. Now, when I try to boot with the option 'start using software installed on your hard drive', all I get is the message

  "Cannot find a device suitable for C drive.

  I have reset the BIOS, tried to format the drive hard in the other format, uninstalled and reinstalled the software, tried to start the pc target without the USB, but nothing seems to work.

  You have ideas on what goes wrong?

  Thank you

  Samuel

  Have you tried changing the settings of the BIOS for the hard disk controller?

  There could be different modes available.

  Refer to the hard drive of this document: http://zone.ni.com/devzone/cda/tut/p/id/8239?OpenDocument

• Remote Desktop error: the system cannot find the specified file. C:\WINDOWS\system32\ < LANG_NAME > \mstsc.exe.MUI

  Came across an interesting problem this morning. After starting my PC from various applications (OutLook 2002, Management Studio of SQL Server 2008, etc.). I was able to connect to a server by using Remote Desktop (RDP, alias). On trying to connect to a second system, I started getting the following error message:

  The system cannot find the specified file. C:\WINDOWS\system32\\mstsc.exe.MUI

  Will always be connected to the server, I tried to launch a second instance using RDP, but received the same error message.

  I googled the error and found different solutions (the best solution to examine ishttp://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/164d1e0b-51e6-4201-9dc2-3f4a0ccb14e5), however, none of the solutions seemed to work.

  I tried checking the virus/malware, etc, but nothing was found. I tried to re - load the dll and the exe (s), but still not received the error message.

  The next solution was to try to see what can be changed on my system (new programs, etc.). I noticed there is an update downloaded to my system (C:\Windows\WindowsUpdate.log): AutomaticUpdates content success install successful and Restart required for the following update: update for Windows XP (KB969084)... the update is related to remote desktop.

  I rebooted the system, still not received the RDP error messages. Is I did a complete "install updates and shut down ', and then restarted my system that started working again.

  For the record, here is some information on my system:

  XP Professional: Version 5.1 (Build 2600.xpsp_sp3_gdr.091208 - 2036: Service Pack 3)

  c:\windows\system32\mstsc.exe: 6.1.7600.16385

  I wanted to just post this in case someone else runs into a similar problem...

  Thank you!

  Argue for your limitations and of course they will belong. -Richard Bach, Illusions

  I have a machine with the same problem

  XP Professional: Version 5.1 (Build 2600

  I installed the update for Windows XP (KB969084).

  It does not, but a reboot is required because the system is running on the old dll

  MSTSC.exe works now

  Thanks for the info!

• Receive error message: the system cannot find the specified file. C:\Windows\System32\ < LANG_NAME > \mstsc.exe.MUI when I try to use remote desktop.

  Remote Desktop error

  I use Vista Home Premium.  I used to be able to use the remote desktop connection application, but all of a sudden, it stopped working.  When I try to run it I get this message:
  _________________
  The system cannot find the specified file.

  C:\Windows\System32\\mstsc.exe.MUI
  _________________

  Does anyone have a solution to this problem?  I do not have this file into C:\Windows\System32\en-US\... but perhaps it was corrupted somehow?

  Please help me.  Thanks in advance.

  Hello

  It seems that there are a few system files that have trouble.  One of them being mstsc.exe, I wish you find spyware or infection by the virus first, before you try the next step.  Please see the sticky thread in the security forum.  MVP offers some good advice how to remove these problems.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/fa30853d-719a-4265-9e7b-9287567d31e3

  If everything is clean, we will try a repair installation to replace the problem files and also to ensure that other system files are good.

  The 'repair' installation (upgrade on-site) will not affect your installed programs or data.  Just make sure that you are already connected to your computer when you start the installation.  Do not boot from the DVD.

  If the installation does not start automatically when you insert the DVD, run setup.exe from your DVD player.

  • When the Setup program starts and the install now screen, click install now.
  • Note When you receive the important Get updates for installation message, click go online.
  • Click upgrade when the which type of installation you want? appears

  Please let us know if this solves the problem for you.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Signed .bar - cannot find the default application

  Hello

  a friend send a link to his game app signed .bar to consult. (The game is created with Air 2.5 if it matters)

  I downloaded it with the BlackBerry browser and when I try to open the .bar, an error message appears

  "Cannot find the default application"

  
  I've already put my developer intro PlayBook (OS 2.1) mode.

  How to install the .bar file?

  Thank you.

  Vibes

  You need to side load the folder bar. A lot of discussion on that.

• Unable to adapt "record level" for the sound recorder. Audio system works very well. Cannot find a software which allows the change to the record level of mic.

  I want to increase the logging level for my sound recorder and cannot find anything in the Windows 7 software that will allow me to do. I know that it's there somewhere because I put it at 50% during a recent troubleshooting session when he was at zero. Now, I find that the screen to increase it even more.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You can try the steps below and check if the problem is resolved.

  To adjust the record volume, follow these steps before you register:

  1. click on Start

  The collapse of this top this i, and then click Control Panel.

  2. click on hardware and sound.

  3. under his, click manage audio devices.

  4. click on the recording tab.

  5. click on the microphone device and then click Properties.

  6. click on the tab levels move the slider to increase or decrease the volume.

  If you find difficulties in following the above steps then you must follow the link below.

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is lower than that of Windows XP.

  http://support.Microsoft.com/kb/973446

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Failed to start Remote Access Connection Manager Service. Get the 20 error: the system cannot find the specified device.

  This seems to have started with the last batch of updates of Windows 7 (including SP1).
  I can't connect using dial-up.  Get the message:
  Cannot load the Remote Access Connection Manager service
  Error 711: The operation could not complete because it could not start the remote access connection manager service
  in time.  Please try the operation again.

  When I try to start the Remote Access Connection Manager service manually, I get the message:
  Windows could not start the service on Local computer remote access connection manager.
  20 error: the system cannot find the specified device.

  My phone displays the modem works properly, and telephony and the Secure Socket Tunneling Protocol service started.

  I don't know what else might have changed.

  Hello Vince_867,

  Thanks for your post.  Take a look at this thread for a possible solution to your problem.

  See you soon

• Windows cannot find c:\Progra~2\Packag~2\bar|1.bin| Appintegrator.Exe

  Original title: how to get rid of it.

  Windows cannot find c:\Progra~2\Packag~2\bar|1.bin| Appintegrator.Exe

  Hello

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  Management applications/programs start at the point 8.1:

  How to manage Applications startup in Windows 8 or 10

  "How to use the System Configuration tool in Windows 8/8.1.

  http://www.7tutorials.com/how-use-system-configuration-tool-all-its-awesomeness

  "With the help of Configuration (msconfig) system.

  http://Windows.Microsoft.com/en-us/Windows/using-system-configuration#1TC=Windows-8

  You can also use this free program to do, too:

  "Autoruns for Windows V12.03"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.