Z500 GPU works is not in performance of power high/Maximum after the spill of Milo

Hello world!

Ask anyone advice/assistance on the issue of my laptop. I have Lenovo z500 with GT650m GPU 4 days years ago my cousin accidentally spilled her glass full of Milo on my laptop, fortunately I was able to remove the battery on time and everything dry up after that 24 hours he was already up and running again but I have a problem with the games I usually do listen on average FPS. Before the spill, I was playing Final Fantasy 14 with FPS on average around 45-60, once I start the game I felt the fan pick up speed, power and starts to heat up. After the spill, it seems that the dedicated GPU is not used I only get around 15-19 FPS on average.

Settings, control panel NVIDIA to power management is already Maximum power Powerformance, power management is also at its peak. I hope someone can help

Sorry, but you need to take your laptop to a technician or a lenovo for detailed service center check.

I don't think that anyone here can recommend an action plan to address your laptop after a spill of liquid. Milo can be sticky and may have formed a layer under the keyboard or if liquid has been spilled into the motherboard, it's a matter of time that the other components start to fail.

Tags: Lenovo Notebooks

Similar Questions

  • can not turn on power windows firewall after the expiry of pre-installed McAfee

    Hi, I can't turn on the power windows firewall after the expiry of pre-installed McAfee, first issue of w / this time.

    New pc, Lenovo Win 7 Professional.

    Thank you; Ricky

    Did you uninstall McAfee?  If not do it first and then try to use the windows firewall.
    If still a problem, run the McAfee available here - cleaning tool
    http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  • Can not activate Adobe Acrobat 7.0 standard after the window 10-any solution?

    Can not activate Adobe Acrobat 7.0 standard after the window 10-any solution?

    Acrobat 7 is not compatible with windows 10.

    I recommend you upgrade to Acrobat DC. (Plans and price |) Adobe Acrobat DC )

    Kind regards

    Rahul

  • Equium M50-164 does not work after the spill of water

    I bought a laptop Toshiba Equium M50-164 last year.
    I paid a lot of money, now it does not work.
    I can't afford to write that he took so therefore must operate.

    The reason why it does not work is the water spilled on it.

    I took it to a specialist. I found in the repertoire of Thompson, I paid him £50 and he siad he probably one
    new motherboard and so not worth repairing as it comes to Toshiba and their parts are expensive etc...
    Is this fair?

    I'm desperate to fix but don't know how.

    Help, please. Without doubt, I should be able to buy a motherboard for the laptop without costing an arm or a leg.

    Hello

    As you probably know that the laptop parts are not cheap because of miniaturization and mobility.
    The LCD screen and the motherboard are the more expensive parts that are used in the laptop. I na? not know if Toshiba parts are more expensive. I guess it depends on the features of the laptop.

    However, the new motherboard is very expensive and I think that the search for unity of second hand with the motherboard isn't a bad idea.
    CA? s your choice. New motherboard = expensive but with card guarantee or second hand mother = cheaper, but no guarantee

    PS: the replacement of the motherboard is not very easy and that's why if you have no experience you should ask a technician for help.

  • Error - birth of nations has stopped working. Not able to run Rise of Nations in the Windows Vista-based computer.

    Original title: Rise of Nations

    I used to play on my computer but now the game stops after the opening movie is finished, it closes and says "rise of nations has stopped working. a problem caused the program to stop working corectly. Windows will notify you if a solution is available. "He has never found a solution to the problem. This happens every time. reistalling tried diferent even repeatedly in different places without success. My os is vista home top and I have a dell studio xps. the disc is not a top scratch. Please help me! Thank you!

    Hi GavinGraham,

    I recommend you contact the center of Rise of Nations Solution & advance helps support professionals.

    http://support.Microsoft.com/GP/cp_riseofnations_master#TAB4

    Hope the helps of information.

  • Data do not form filled - using Fetch manual process (after the header)

    Hello

    I have a FORM based on the EMP table... say with the next field.

    1. non - employee P1_EMP_NO
    2. employee name - P1_NAME
    3 employee location - P1_LOCATION

    I have another table called EMP_STG, it's the temporary table for EMP.
    I have suite 2 button on the page of the form.

    -Save (when I click on it, the data are inserted into the EMP table)
    -Save temporary (when I click on it, the data is inserted into the temporary table EMP_STG table)

    The form is already have a Fetch automated line process (after the header) to extract data from the EMP table. It works very well.

    I created a second process of recovering data from the temporary table EMP_STG.
    Extraction of EMP_STG / after the row header
    The problem here is P1_EMP_NO & P1_LOCATION are not getting filled. Process works fine, no error...
    Only form elements are not get filled.
    declare
      cursor c1 is
        select * from emp_stg
        where emp_no = :P1_EMP_NO;
    begin
      for c1_rec in c1
      loop
         :P1_NAME := c1_rec.NAME;
         :P1_LOCATION := c1_rec.LOCATION;
      end loop;
    end;
    Note:-both the above automatic Fetch & Manuel Fetch based on some condition and a moment alone executed.

    Thank you
    Deepak

    I guess that you will then have to consider the options, what I said in a previous post.

    CITY

  • How to get disabled login user (without password) at startup, so NOT to SHOW at all and so after the switch, go to desktop directly

    Vista Ultimate 64-bit

    How to get disabled login user (without password) at startup, so NOT to SHOW it to all (and needed clicked) and so after the switch, go to desktop directly?

    Also after inactivity, how to not go to sleep mode and press "power on" to bring back?

    Hello

    If you want to start directly on the desktop?

    How to automatically connect at startup in Vista
    http://www.Vistax64.com/tutorials/66966-logon-automatically.html

    Or

    How to make Vista require a user name and password when connecting
    http://www.Vistax64.com/tutorials/89812-logon-username-password.html

    =========================================

    Start - Control Panel - Power Options - upper left - require a password on wake up
    tick her do not require a password - save the changes.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • I can't hear any sound when you play a HDMI video uploaded to youtube, plays very well while on youtube but will not play sound from my hard drive after the use of realplayer download

    I can't hear any sound when you play a HDMI video uploaded to youtube, plays very well while on youtube but will not play sound from my hard drive after using the lplayer rea download

    Hello

    We will try to download different video using different downloader (other than RealPlayer) and see if the problem still persists.

  • Satellite L505-119 - keyboard does not work after the spill incident

    Recently had a minor spill on my laptop incident. Quickly, I removed the battery and the power and let it dry for a few days.
    After two days I tried starting but without success. Then I carefully opened the laptop and carefully cleaned and dusted it all the way to the motherboard. Surprisingly, it started working perfectly again, with the exception of the keyboard and I don t know what to do.

    I tried making sure that the band is correctly inserted into the motherboard of countless times and tried to uninstall and reinstall the keyboard drivers, but both were not helping. What I want to know is; If there is anyone of you who have had the same problem, and if there is a way to check if it s my keyboard or motherboard that is broken.

    Thanks in advance

    >... If there is a way to check if it s my keyboard or motherboard that is broken.
    In my opinion, there is only one way to check: replacement keyboard. You should test the functionality with the new keyboard to see if everything is OK.

  • LaserJet P2055d: Printer that works does not appear in all programs or programs in the control panel

    I had help from HP support as my LaserJet P2055d did not work properly. The cooperative has taken over my computer (Windows 7 Ultimate 64-bit) and got, it works. However, now even if the printer will appear in devices and printers and works normally, it is not in all programs or programs and features in the Control Panel, so there is no way to uninstall it if necessary. The lady from HP had a difficult time wiuth, but that's how it was left.  It all works, but it seems not to be registered. Is it that necessary to do something at the moment?

    Thank you very much for this. My problem is that before the problem that arises with the printer, HP 2055 d has always appeared in the lists. But I guess if it's not broke don't fixit applies here. While there is a lot more to worry about than that, I will happily enter (?) on my way. Best wishes. N.

  • Product key does not work - had premium windows 7 but I have now after the ultimate update

    Someone help me please!

    I'll give you as much information as possible! I'm running on 64-bit and I had to erase my entire hard drive and re install windows (which took forever).  My product key is legitimate too!

    If after you have reinstalled windows 7 from USB, my computer went from home premium to ultimate windows and now my product key no longer works. So, what can I do? And if there is something I can do, can someone explain this in simple instructions!

    Well, the the ei.cfg delete statements created an all-in-one installed, start just so him again and perform a new installation, make sure that you select Home Premium during installation.

    Boot from your installation media:

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

    OR

    How to load BIOS and change Boot Configuration

    Windows 7 starts as it normally does in the environment of installation, the only difference this time is, we'll give you a choice to select the edition of Windows 7 you want to reinstall.

    Select the edition of Windows 7, you have a license for and proceed with the installation as usual.

  • I see not shown downstairs Sync firefox icon right after the upgrade to Firefox 3.6 of Firefox 6.0 and I don't know if it works. Someone has the same problem and know solutions?

    I can see the icon if open 'Option' under the 'Tool' menu, but when I look upward into the 'add-on' under the same menu, I don't see Firefox Sync in the list. I don't know if the update to Firefox Sync for Firefox 6.0 is not ready or other problems which I do not know. I downloaded this software Add on several times and put in place, but the problem was still there.

    Firefox 4 and later have synchronization integrated, no add-on is required. The icon "" in the status bar that has been used by the extension disappeared, but there is a synchronization toolbar button sitting in the Palette to customize you can place a toolbar where you want it. Place the cursor on the button to see the connection status of the synchronization.

    https://support.Mozilla.com/en-us/KB/how+to+customize+the+toolbar

    http://KB.mozillazine.org/Toolbar_customization

    Click on the orange button Firefox and you can see the status of synchronization, too. If synchronization is not the installer, the app menu shows set up sync.... Once the synchronization is configured and operational, this menu shows is to connect if synchronization is not connected on the server synchronization, or Disconnect when it is connected.

  • Assistance button works do not (= does ' t start VAIO Care Rescue) after having lost and recover the partition table / MBR

    Hello

    For some reason that I lost my patition table but I was able to get it back and I'm rewriting MBR. I'll be back all my partition and files contain the VAIO recovery partition except files on the operating system partition ("C:\ »). It's an unformatted partition. VAIO Care rescue didn't work so I had to format "C:\". "and reinstall windows 7 and now all is good.

    I have VAIO Care Rescue. I think that it is enough to change the partition table / MBR. What exactly is the problem and is it possible to fix the problem of button Assist?


    And if one removes all xxxx (include VAIO Recovery) and creates new ones, is it possible, software or image of the recovery restore partition and Assist button start VAIO Care Rescue?

    My laptop model: VPCEA25FG

    Thank you

    You can restore your computer back to factory with all the pre program and software installed by using recovery discs. For further assistance, please recommend contacting Sony's Support Center in your area at http://www.sony-asia.com/support/product/VPCEA25FGfor your model of Asia-Pacific computer. Thank you.

    If my post answered your question, please mark it as "accept as a Solution.

  • HP envy 17 can not boot windows or using recovery DVDs after the replacement of the motherboard

    Hi all, I need your help

    first of all sorry for my English but I'm from Greece. I really don't know a lot about the mobile only very basic computer.

    I have a hp envy 17 3d 2080en with windows 7 Home premium which, after overheating, chips to the motherboard. I ordered and installed a used motherboard from China (part 630793-001 hp number).

    After that I tried to start the laptop, but when he opens he said probably due to the change of the material he cannot start windows normally. After reading a lot on the internet, that I tried using the recovery DVDs I had prepared before the problem, but they will not start just yet. Then, I tried to use the cd system repair but again no luck.

    I looked in the bios as some people say on the internet and realized that the product number and serial number are different from those of my laptop and it's maybe part of the problem, but I don't know. I looked in other posts about similar problems, but did not get a definitive answer and this is why I post for your help.

    Thanks to you all

    Nikos

    IF YOU HAVE AN HP LAPTOP (MINE IS HP ENVY 3D 2080EN) THAT YOU HAVE CHANGED THE MOTHERBOARD WITH ANOTER ONE (MINE WAS FRIED OVERHEATING) AND AFTER REPLACING YOUR LAPTOP DOES NOT START AND YOU CAN'T FIX IT WITH SYSTEM REPAIR DISC OR DOES NOT PERFORM A CLEAN WINDOWS INSTALL OR DON'T LISTEN NOT A RECOVERY CD/DVD RECOVERY THEN EXPERTS HP WHO KNOW NOTHING. LOOK IN YOUR BIOS, AND IF YOU SEE THE PRODUCT NUMBER OR SERIAL NUMBER DIFFERENT THAN THOSE APPEARING ON YOUR COMPUTER (USUALLY IN THE BATTERY COMPARTMENT) THEN GO TO A HP SERVICE ALLOWED AND TELL THEM TO HAVE YOYR TATTOOED BIOS. WITH THE TATOO (COST US $ 40), THEY WILL REPLACE THE NUMBER OF BAD PRODUCT AND/OR THE SERIAL NUMBER WITH YOUR MOBILE PHONE NUMBERS AND YOUR PROBLEM IS SOLVED. MY MOTHERBOARD HAS BEEN FRIED TO OVERHEAT AND I BOUGHT A USED ONE FROM CHINA. AFTER I REPLACED IT THE LAPTOP WOULDN'T START AND WOULD NOT ALLOW ME TO REPAIR DVD HE OR EVEN THE USE OF RECOVERY. I CALLED HP SUPPORT, I EVEN JOINED THE HP FORUM TO ASK FOR HELP AND I GOT ONE EXPERT WAS USUALLY TRY THIS OR TRY THIS. DON'T LISTEN TO THEM. FINALLY, I READ AN ARTICLE FROM THE INTERNET THAT EXPLAINED THAT WHEN YOU CHANG THE MOTHERBOARD / SYSTEM BY ANOTHER THEN THE BIOS REFERS TO THE NEW PRODUCT NUMBER, MOTHERBOARDS AND/OR THE SERIAL NUMBER AND THIS WAY THERE IS INCOMPATIBILITY WHICH DOES NOT ALLOW WINDOWS TO START, YOU CAN NOT REPAIR WITH SYSTEM REPAIR DISC OR IT DOES NOT PERFORM A CLEAN WINDOWS INSTALLATION OR A RECOVERY CD/DVD RECOVERY. ONCE YOU TATOO THE BIOS THATS IT. THE LAPTOP WORKS. I HOPE THAT THIS MESSAGE WILL HELP SOME PEOPLE WAISTING THERE TIME AND SPEND THE MONEY FOR NOTHING

  • ReadyNAS 104 does not start. Out_of_memory error 354. After the upgrade to 6.4.1 #26323717

    6.4.1 installed from 6.2.5 yesterday. Everything went well. Did all the "computation". has worked well.

    No not from one day to the next with 354 out_of_memory error. now, does not start.

    I tried reinstallOS. No luck.

    totally stuck and he needs for businesses!

    You could try RO mode, see https://community.netgear.com/t5/Using-your-ReadyNAS/Readynas-104-won-t-boot-Error-354-out-of-memory...

Maybe you are looking for