Z820 with LSI 2308 sas controller will not publish with intel PCIe SSD installed.

Similar Questions

• PC wireless to Xbox controller will not sync

  Wireless pc Xbox controller will not work. It installs, but when I sync with the wireless receiver the controller, the controller just flashes and never made a connection, however, when I tried on my brother's computer, it works fine.

  I did search all over the internet I can find about this investigation, but had no luck. Help, please!

  Hello

  Check out the link and follow the steps.

  Xbox 360 Wireless Controller disconnects or unable to connect

  http://support.Xbox.com/en-us/Xbox-360/accessories/wireless-controller-disconnects-frequently-or-cannot-connect

• HyperBowl will not start in XP SP3 / cannot install Windows update KB924867 (service pack is newer than the update...)

  original title: hyperbowl will not start in XP SP3 / cannot install KB924867

  Hello

  I just reinstalled windows XP and done all the updates. I then reinstalled hyperbowl 3d and it will not open up. Now it used to be that if you ran the update:

  Update for Windows XP (KB924867) http://www.microsoft.com/download/en/details.aspx?DisplayLang=en&id=6446

  It would solve this problem (see http://hyperbowl3d.com/oldsupport.html).

  I downloaded the update, and it says:

  "Setup has detected that the version of Service Pack for this system is newer than the update you are applying"

  So I can't install the update. Is it possible to reinstall this hotfix without remove SP3 or is there another work around, I can use?

  Thanks in advance!

  Welcome & thank you for your comments.

• I have a Samsung NP900X4C laptop (with a 256GB SSD installed) and screwed up through the installation of Win7Prof instead of the upgrade.

  Original title: clean install Win 7 64 bit

  Like others, I have a problem with a clean install of Win 7 64 bit Proffesional. I have a Samsung NP900X4C laptop (with a 256GB SSD installed) and screwed up through the installation of Win7Prof instead of the upgrade. A lot of the buiult in functions do work not (Wireless; Hiring of video, USB Ports etc.) and to top it all off I get now blue screen errors...

  If installing from an external DVD drive, crosses, it shows that the HARD drive has already 4 partitions.

  Partition 1 (e :)) Disk0

  Disk0 Partition 2

  Disk0 3 (C :) Partition System

  Disk0 Partition 4 hidden OEM Partition.

  So far I have just selected Heve installation on Partition 3 C: System.

  Y at - it a utility that I can use to retrieve the data from the OEM Partition I want to return to the initial state by default if possible.

  If not what is the best utility to use repartition (how many and what size?) and format the HDD.

  Cordially chrisxsmith

  The best you can do is to contact Samsung and request recovery media to restore your system to its factory default state.

  Call Samsung to get a recovery disc - to find a phone number for your location:

  http://support.Microsoft.com/GP/oemphone/

  Thank you Andre, very appreciated, unfortunately Samsung and their Tech Support here in the UNITED Arab Emirates was not as useful.

  I managed to keep the button restore during the 5 sec boot process that initiated the request 5 restore Samsung which was then able to take the original installation of the hidden Partition image.

  Fortunately the issue is resolved.

• T7610 SAS (LSI 2308) precision controller - set the SATA drives?

  Hello

  The controller is SAS RAID LSI 2308 integrated in the T7610 of precision allows to attach SATA hard drives in a non-raid configuration?  I just realized this system has only TWO internal SATA connectors, but I need THREE internal SATA drives.

  What I was asking is if the SAS ports will allow the connection of SATA drives that are not used in RAID mode?  This way I can add my 3rd SATA HDD to a SAS ports.

  Thank you
  M

  We are experiencing the same problem/issue with the T7610 of accuracy by using the controller LSI-2308.  The end result that we would like is to have 2 drives separated - do not use the raid controller.  However, the CD Rom takes up one of the sata drive connections.

  Anyone been able to disable the raid and then controller, seeing the disks during the installation of windows needs to see?

  Currently, I have 2 blank drives (3 TB (ea.) and windows setup does not see the discs - but the raid controller load very well through the configuration.

  What should I do to get readers in windows?  There the meta that needs to be removed?

• XBOX 360 controller will not connect to pc with Windows 7 64 bit

  I'm tying to connect my XBOX 360 controller to my PC and when for the first time I plugged the cable into the usb slot I the prompt to download the drivers and then a message saying that my device was ready to use. Problem is that no matter what I do, it seems that the controller does not communicate with the PC when I try to test using the joy.cpl I don't get any device in the list.

  Hi DarkAvenger1997,

  Please post your query in the Xbox forums for assistance.

  http://forums.Xbox.com/default.aspx?forumGroupID=17&XR=shellnav

• Parallel logic LSI, LSI logic SAS, parallel Buslogic (not recommended for the guest operating system), vmware paravirtual

  Infrastructure:

  vSphere

  ESX 4

  Reference Dell R710 Server

  I install WIN 2003 x 64 as a virtual server on ESX 4, when I select LSI logic SAS & LSI logic parallel it does not detect the hard drive, do I need driver if so where can I download?

  For parallel bus logic (not recommended for the guest operating system) & Vmware paravirtual, do I have to select this option for my win 2003 R2 x 64 edition?

  Please help on this issue.

  ~ Rashid

  If you really want to use it for installation, you will need to extract the driver from the VMware Tools ISO and add it to a disk image.

  Dave

  VMware communities user moderator

  New book in town - Start Guide quick vSphere -http://www.yellow-bricks.com/2009/08/12/new-book-in-town-vsphere-quick-start-guide/.

  You have a system or a PCI with VMDirectPath?  Submit your specifications to the unofficial VMDirectPath HCL - http://www.vm-help.com/forum/viewforum.php?f=21.

• Dell XPS 600 will not PUBLISH the same!

  I have a dell xps 600 with the 14f0w91 of service and code whenever I turn on the PC, all fans are on MAXIMUM speed with power clear amber and 3.4 lights are on. It will not even POST.

  Is there any fix for this free?

  Thank you, Nick Hanson

  http://support.Dell.com/

  If you have no instructions POST/Splash/Bios-setting the screen to the power, you seem to have a hardware problem.

  If under warranty, contact Dell.

  If it is not under warranty, contact a local and trusted computer repair workshop.

  See you soon.

  Mick Murphy - Microsoft partner

• Adobe Captivate 9 will not publish my project

  Anyone has an idea why Captivate will not post my project? I get an error message when I click on "publish".

  Please show a screenshot of your error message.

  Try experimenting with a copy of your current project, hide slide groups to see if you can then publish.  If it works usually it indicates there is something on one of the hidden slides that prevented the successful publication.  Then you can narrow things down until you find the culprit.

• CC will not take my password, how to install, more to the story?

  I have a free LR for the purchase of a Leica DLUX 109. I finally got my codes and download of Leica. When I try to install CC asks for a password and will not give my name to appropriate user, they are using my name should be my email. In any case try both directions with my password it not take m y information and let me move forward. Adobe is very difficult to communicate with everything I want to do is install LR6 and reinstall my NIK, I had problems with. Any thoughts?

  Thank you

  What is your COMPUTER asking your COMPUTER password to prove that you are authorized to make changes?

• File will NOT publish in Captivate 5.5

  I've been a user for a long time of Captivate starting with Captivate 3 and working my way up to now using Captivate 5.5.  At work, I worked on a fairly large project, but today one of my modules (about 279 slides) refuses to publish.  Mind you, I probably published this thing 2 dozen times over the last two weeks very well. I don't know what is the issue.  Whenever I publish the module that it hold 70% generating slide and will not move any further.  I literally left alone for more than an hour and it does not move.  I had two other colleagues are trying on their computer, and he did the same thing.  This led me to believe that this is the file (perhaps it was corrupted somehow happened to me before), so I started it chop into pieces, copy and paste in new modules and trying to publish it like that, but he did it the same time of EVERY thing.  I can post all the other modules very well, but not this one and I don't understand why.  Knowing the Captivate, unless there is another problem that I don't know, I think I'll literally have to re-create these slides from, copy and paste the individual elements in a new project with all new slides file because something had glitched in the coding behind the scenes.  Please help because I want to not have to do this for 279 slides!  Thank you!  Record: Publication to Zip File Scorm 1.2 compliant and poor quality.

  Try to enter in Edit > preferences > project > SWF quality and disable all the compression options, then republish again.

  If this does not work, you can have something on a slide that's causing the problem. Try hiding groups of 50 slides in the project, one group at a time, editing after each step to see if there is a particular group that when hidden allows him to publish.  If you find this group, begin to hide groups of slides inside this group until you isoliez the slide of the problem.  Then recreate THIS slide.

  If you have hidden all THE slides in the project without being able to post, then your question may be corruption in some Actions put forward in the project.  Copy all the slides in a new shell project will remove all stocks advanced.  You will need to recreate them.

• Windows has blocked a potentially dangerous file and will not allow him to ti be installed from canon printers

  Windows called a potentially dangerous file and will not be installed, it is from the canon printers, how can I install it?
  Windows has blocked data access cab 1

  Hello

  1. which version of the operating system you are using on the computer?
  2. What is the accurate and complete error message that you receive?
  3. have you made changes on the computer before the computer?
  4. are you trying to install the printer software\downloading turn off the internet?

  Method 1:
  You may need to download the correct driver\software from the manufacturer's website only.

  Method 2:
  You can perform the clean boot and try to install and check:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  Method 3:
  You can disable the security software and check
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• Game controller will not connect with game

  I bought Microsoft Combat Flight Simulator and a LogiTech gamepad Pro years 3D extreme when I had a Windows XP computer, and they work very well together.  I've since upgraded to a Windows 7 computer.  I updated the driver for the joystick, and the operating system recognizes (when I check the properties, I can move the stick or press buttons and see the answers on the screen).  But I can't get the game to respond to the gamepad.  Any ideas?    When I click on settings on the game homepage screen, a box pops up saying "your joystick device has changed"non typeable characters"to"various non typeable characters".»  You want to reset the control assignments? (recommended) "the characters change every time I do this.  I tried answer Yes and then after a few tries I answered no.  Same results, the joystick is not in the game anyway.  I looked in the CombatFS.cfg file and found similar characters in the section of the controller (LastJoystickName = 'non typeable characters') thank you, John

  Hi John,.

  Thanks for coming back.

  Sorry to see that the problem still persists.

  The Logitech Extreme 3D Pro joystick on game controller is compatible with Windows 7.

  Logitech Extreme 3D Pro joystick Game Controller compatibility with Windows 7

  You can check the Logitech Support and try to download the latest version of the software for the game controller.

  http://www.Logitech.com/en-in/support/extreme-3D-Pro?CRID=411&OSID=14&bit=32

  This can also occur due to some incorrect settings in the game.

  If the problem persists, you can also get in touch with Flight Simulator Support for assistance.

  Flight Simulator support

  Hope the helps of information.

  If you need assistance to resolve any issue related Windows, please post your request and we will be happy to help you.

• SteelSeries 3gc controller will not play with mw2

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I downloaded all the drivers of the computer chooses the controller, but when I enter the game I up to duty use my mouse and keyboard.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  ·        This only happens with this particular game?

  Check if there is none of the game settings that will enable the controller. You can also check on another computer if the controller works fine with the game.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• XBOX CONTROLLER WILL NOT WORK ON PC

  -J' bought the new Afterglow for Xbox 360 controller at Gamestop. (does not come with the software, plug-and-play)?

  -J' installed the latest software for 360 wired controllers from Microsoft for Windows 7 64-bit Web site

  -The controller is detected in the Device Manager under other devices, like "Afterglow for Xbox 360 controllers", with a triangle of error.

  -Device Manager says:

  The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.
  To find a driver for this device, click Update driver.

  -Then, the drivers do not work. Windows cannot find the drivers. Also, I have re-installed the program. Any ideas? I'm playing GTA4 Gay Tony extension and keyboard sucks. Thank you!

  go to this site to do almost any 360 controller:

  follow the instructions carefully

  http://www.SevenForums.com/hardware-devices/9118-XBCD-drivers-Xbox-360-gamepad.html

  If it still does not work, change your controller .inf file. C:\Program Files (x86)\XBCD\Driver\xbcd.inf***

  device-> right click on the no Manager work controller-> properties-> details-> hardware lds (check the numbers and add to the .inf file and then sign the file system with driver driver signature enforcement 1-3 (b)

  example of what I've done: % XBCD. DeviceDesc % = Install, USB\VID_1BAD & PID_F900; Afterglow controller for Xbox 360