T7610 SAS (LSI 2308) precision controller - set the SATA drives?

Similar Questions

• There is an option in the bios to set the sata drive * IDE *-mode?

  There is an option in the bios to set the sata drive * IDE *-mode?

  Grobi

  Hi dude

  That s a funny question.
  No, there is no option in the BIOS!

  Please understand that there are various interfaces to drive HARD. IDE and SATA.

  There is a big difference between the two interfaces and the function of the HARD disk on the motherboard controller, you could use a HDD IDE or SATA HDD.

  But you cannot connect a SATA HDD to IDE or IDE HDD controller for the SATA controller. This is not possible due to different hardware.
  This is not possible and that's why these BIOS settings are not available or don t exist!

  Good bye

• Satellite A300 - where can I find the SATA driver?

  Where can I find the SATA driver for Toshiba Satellite A300 1MW for Windows XP?
  I tried to find it here:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  There are a lot of drivers, but none for SATA.
  and here: http://downloadcenter.intel.com/
  Here I can't find appropriate for my model injector.
  Thank you in advance for your help!

  Hello!

  The SATA drivers are in the Intel Storage Manager, so you need to download this package.
  You can find it on the Toshiba site and on the Intel Web site.

  Check again for Intel Storage Manager Web sites.

  Good bye

• I have a 'C' IDE drive failure I have a SATA drive connected via a PCI-SATA controller card. I want to change from hard disk IDE 'C' on the SATA drive. What are the steps to achieve this?

  Running Windows XP Home, I want to change hard drive as described above.

  As a result, I have a USB hard drive, which I copied the hard drive of the original 'C', before it fails altogether.

  Is it possible to copy this USB drive on my SATA hard drive and have as my primary hard drive?

  Keeping in mind of the SATA hard drive, connected via a PCI-SATA controller card.

  Unless your third sata card supports the option to boot from this map, its not going to work. Not all sata cards are bootable.

• Satellite Pro P200 - 17 c: Win XP won't load - installation of the SATA driver

  Hello

  I have a satellite pro p200 - 17 c I've had good years, allways worked without any problem.

  Last week when I booted the laptop, windows won't load and I find myself safe mode selection screen. No options whatsoever me to windows loading, I tried F8 and still nothing.

  I tried the restore cd that reimagee the drive but I get the same thing, I tried a new hard drive, once again the same.

  But if I try to load windows from an OEM to install that software does not because it is a sata drive and there is no floppy drive. I have an external floppy drive I use, but it is not known now.

  Any ideas or suggestions?

  Hello

  Go to BIOS and set it to default settings.

  In this case the SATA mode must be on AHCI. In this case the SATA drivers are required to install the Windows operating system. But as much as I know that Windows 7 already contains the SATA drivers if usually you don t had to add SATA drivers while OS installation the installation program.

  However, here is a nice HowTo document that helps you add SATA drivers for Win XP installation disc.

  + How to integrate a SATA AHCI driver into a Windows XP Setup CD.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  + How to integrate the AHCI driver during the installation of Windows XP.
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

• Installation of a dual boot for XP on a Vista - XP installation computer forget the SATA drive after restart required #1

  Hello

  I'm trying to set up a dual-boot XPpro on my Vista machine.  I found the instructions detailed at various locations.  I prepared a score of 30G on my SATA drive and booted from my XPpro and XPpro (SP2) retail drives.  The score is quite small because I have only use for some applications.

  I have the following problem and I wonder if anyone can help.  The disk and partition is by my SP2 disc, but it's ok that BONE is not used on any other machine.

  I can choose the new partition as the location for the new installation of XP.

  Installation gets to the point where the first reboot is required, then at startup, I'm stuck on the option 'press any key to boot from the CD-ROM.  I assume that the reader is not detected.  If I try to start from scratch, I get the warning that the new partition already has an operating system on it, but I can reformat and move forward, then arrive at the startup problem re.

  There is no XP drivers for my Board, but I can not install them because they are on CD and the only option to load the specific drivers in the first part of install required has a diskette is in the drive, and of course I don't have a floppy drive.

  I then use the Startup Repair in Vista I can't move to the stage where XP is installed in fact correctly.

  Any help very welcome!

  Paul

  Hello

  I made a disc of slipstream with nLite as suggested, my sata drivers included but still could not circumvent this problem.  Installation kept insisting that they had to come from A:

  Rather than taking the box to bits I read from the link posted by Michael Murphy, once again and found the answer of Taydius on 250/1 posts.

  http://www.syschat.com/dual-boot-Vista-XP-Vista-already-26-1946.html

  Problem solved by installing EasyBCD in Vista, it points to the new partition with the inaccessible XP and reboot and selection, installation on board as usual.

  Dual boot now works fine.

  Thanks for the help!

  Concerning

• Qosmio G20 no longer works after trying to load the SATA driver

  My qosmio g20 was working until I loaded a driver sata intel (f6flpy).
  Now the lights are working but no attempt to access cd or hard disk etc.
  Is there a way I can reverse the procedure or reinstall drivers chipset etc I guess I corrupted?

  Hello

  I think that you have installed a wrong driver!

  The fact is that the Qosmio G20 supports RAID functionality and you must include the RAID driver and not the driver SATA!

  The RAID driver can be found on the European driver Toshiba page!
  Please choose your model of laptop (right series), download the RAID driver, install it instead of driver SATA and follow along with the Windows operating system installation.

  I think this should solve this problem.

  I'd appreciate some feedback from you!

• Impossible to restore the image of the back of the SATA drive

  Original title:-backup Image not found

  Before replacing our main hard drive, we did a backup on a SATA drive of the computer.  With the new desktop restore disk can't find the backup disk.  Even on a SATA connector inside.  How to make the backup of this drive?

  Hello TomEllisTR,

  Thanks for the return of the response.  I have included a link below, where someone else has experienced this error trying to restore the backup.  Please let us know status.

  Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/backup-fails-with-the-data-is-invalid-error-code/477fdd56-4174-4100-8e56-955b3839a246

  Thank you

• Help set the CDROM drive letter

  Hello

  We run vCenter Server 5.1, but when I deploy a model vm, change CDROM drive letter. Which scripts sysprep or customization should I change to the virtual machine maintain the vm model CDROM drive letter assignment?

  Thanks in advance,

  J

  Check if this help: http://www.micronauts.us/2011/05/12/script-drive-letter-order/

• Satellite P200 - where can I find the SATA driver?

  Hello

  Sorry, I'm new here.

  I also have a SATA for my Satellite P200 (PSPB3E) driver for XP on my hard drive (for installation).
  Where can I find a driver with ini?

  Greetings ralf

  Hi and welcome to the forum!

  For your laptop, you can get all the drivers on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  The driver package is called Intel Storage Manager.

  In addition, if you are looking for here one bit you can find hundreds of discussions about this. It s really not complicated to use SATA drivers! ;)

  Good bye

• How to migrate Windows 8.1 for SSD the SATA drive of 1 TB on Alienware X 51 R2

  Hello

  I installed a 240 GB SSD in my new Alienware X 51 R2 desktop PC.  It is formatted and accessible within the OS Windows 8.1 at the current address.  I want to migrate OS applications and factory to the new SSD.

  Any advice?

  What I think I do below:

  I have saved everything, created exotic images of system using premium respawn, etc..  I made a bootable CD of Alienware s/w.

  I assumed that I only need to reboot from bootable CD or USB, choose the SSD as drive and choose restore from USB to recover the OS + Apps, correct?

  I have to change the boot sequence in the BIOS or something...?

  Request of forum before I go ahead and take the leap!

  THX,

  Chris.

  Hey Chris,

  abfifg gives good advice (although his link is broken for me, not sure what he was pointing to).  Cloning is certainly the best way to go.  Personally I use Acronis True Image for years & it has been easier for me.  I cloned my Alienware 13 500 GB hard drive to a 240GB SSD, then back to a 480 GB SSD.  Intelligently, it can migrate & adjust partition of a disk of larger size and a smaller without problem.  It is not free, but it's worth it in my opinion.  There are other free options out there, but I never got none of them work well.

  I hope this helps!
  ~ Jim

• T300 with bus adapter host SAS 6 configured for Raid-1, one of the hard drives of 1 TB died.

  I pulled one of the disks 1 to one of the other Dell servers and worry about harming the raid configuration or break the pairing.  Where can I go to see exactly what I do and what I don't have to synchronize the new drive.  I am running Windows Server 2003 R2 on the old server.  Also, even if these discs are the same size, said KA02 on it and says MA08, whatever that means.

  14crowe

  DP/N 0JW063

  Part # JW063 is a SAS 6/IR

  14crowe

  CN-0SW063-13740-96A-0006-A06

  This product ID indicates you have part # SW063. I suspect that there is a typing error because this part number does not exist in my file. It seems that you have JW063 which is a SAS 6/IR.

  Instructions for replacing a drive in RAID 1 to start at the bottom of page 46 of the SAS 6/iR user guide:

  http://FTP.Dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_dell_adapters/Dell-SAS-6ir-intgtd-and-adptr_User%27s%20Guide_en-us.PDF

  All you need to do is replace the drive. If it does not rebuild automatically, then set the HARD drive as a hot spare replacement.

  Thank you

• Set the title of the window dynamically

  Hi all
  
  I am the creation OFA custom page for ads as system will be unavailable between xx and xx hours. I wanted to make the title of the window and the dynamic message and can be configured easily.
  So, I created page main region (MainRN) and the title of the window to the left as white. The page contains RawText point. My controller sets the title and the text of FND Messages in the ProcessRequest method.
  
  Text is displayed but it is NullPointerException as (OAPageLayoutBean) p1.findIndexedChildRecursive ("MainRN") returns NULL.
  
  Here is my page structure.
  
  xxAnnouncementPG
  MainRN (Style of the region: pageLayout)
  Announcement (Style element: rawText)
  
  Below is an extract from the ProcessRequest in my controller
  
  Game title
  OAPageLayoutBean mainrn = (OAPageLayoutBean) p1.findIndexedChildRecursive ("MainRN");
  System.out.println ("mainrn =" + mainrn);
  String title = p0.getMessage ("XX", "XX_ANNOUNCEMENT_TITLE", null);
  mainrn.setWindowTitle (title);
  
  Ad text
  Announcement of RawTextBean = (RawTextBean) p1.findChildRecursive ("Announcement");
  String msgtext = p0.getMessage ("XX", "XX_ANNOUNCEMENT_TEXT", null);
  announcement.setText (msgtext);
  
  I have
  used code below to discover all the childs in my page, but it shows only the "corporateBranding" and "messages".
  
  * for (Enumeration e = p1.getChildNames (); e.hasMoreElements () ;)) {*
  System.out.println (e.NextElement ());
  *}*
  
  How to set the title of the window dynamically? How to know all the recursively childs to the title of a page?
  
  Thank you
  Kishore

  Use pageContext.getPageLayoutBean () to get the handle of the PageLayout Bean. Subsequently, you can use setWindowTitle to define the message.

• Satellite U400-183 lower upgrade to XP - driver for the SATA controller

  Hello

  There is a blue screen during the installation of xp because the missing drivers (SATA controller).
  Could not find the driver, nor on the toshiba Web site on intels.

  Someone who can help? Thank you very much.

  Stefan

  Hello

  Satellite U400-183 seems to belong to the series of PCU44E. Right?
  The European driver Toshiba page provides the drivers for this model.
  You can find on the page of the driver for Win XP Intel Storage Manager and this package contains the SATA drivers.

  But look, man here in the forum, you can find many comments about the installation of the SATA driver why you n t use the search option?

  The best way to install the SATA drivers is the use of nLite.
  He tool free s (you can find it on the internet) and it helps you integrate SATA drivers into the Win XP disc!

  I did it and it worked for me

• Satellite P300D-10U - how to enable the AHCI controller in the Bios

  I have toshiba satellite P300D-10U with windows vista 32-bit, disc ssd drive 2nd hard drive
  and I can't do IT controller SATA AHCI in the bios.

  http://www.Toshiba.EU/discontinued-products/satellite-P300D-10U/

  What can I do?
  install the new windows 7 32 / 64-bit and updated the bios for this maybe windows I can ON AHCI Controller in bios

  This bios has the ability to run on AHCI?

  Thanks for replying,
  Thank you.

  BIOS of the screen:
  http://ImageShack.com/a/img745/6711/ez591J.gif
  http://ImageShack.com/a/img901/7149/SRjUz3.gif
  http://ImageShack.com/a/img743/7539/8Pt5ro.gif
  http://ImageShack.com/a/img901/8573/iPfiOZ.gif
  http://ImageShack.com/a/img746/7872/T3nBfa.gif

  SSD of the screen
  http://ImageShack.com/a/img908/4148/ZjaDr1.gif
  http://ImageShack.com/a/img661/9900/846hMR.gif

  I changed the value to 0
  HKEY_LOCAL_MACHINE es\Msahci

  I install ATi SATA2 RAID (pilot preinstallation)
  http://www.gigabyte.com/products/product-page.aspx?pid=2500#DL

  CD..

  To my knowledge, the Satellite P300 series BIOS doesn t contain the ability to switch the AHCI compatible mode.

  I don t think that even after updating the BIOS such option would be available in the BIOS.

  I see on the first screenshot of the BIOS, the SSD drive is connected to the second controller.
  I recommend you connect the SSD to the first controller (instead of the HARD disk).
  Maybe then you could get better performance.

  Just for the note: portable computers with a graphics card ATI supports the AMD chipset, and in this case the ATI graphics card driver contains the SATA driver files.

  However, I guess the HARD disk controller specification allows the use of better performance of SSD drive.