ZBook 17 G3: G3 Thundberbolt 3 dock of Zbook 17 questions

Similar Questions

• The cs6 InDesign dock icon is a question mark.

  My Indesign CS6 dock icon is a question mark. On my Mac HD > Applications > adobe Indesign CS6 file is a blue folder by default and is only records of Plug-ins and utilities. All other software files and CS6 shows very well to the top/open.

  This started when I tried to upgrade to El Capitan and had file error and eventually phone with Apple care for 5 days my computer get up and run again. Computer now works on OS 10.9.5

  Any suggestions? Should I reinstall the CS6 dmg with 1 single application file?

  Problem solved.

  I reinstalled the creative suite dmg file and everything works fine. Not sure if the cleaning tool was useful or not.

• wlan zbook 14 questions

  I have a brand new 14 Zbook with Windows 7 64-bit OS, where I have two questions.

  (1) the wifi does not work at home. Windows complains over any Internet connection.

  All my other devices work at home, so there is absolutely no problem with my connection.

  I can't even surf locally to my router with the IP address, so its another problem with WLAN to my router/access points.

  The WLAN in my Zbook works well on the other accesspoints, as sharing internet iPhone and work etc...

  I read a few issues with the band of the 5 GHz with Zbook, but haven't found a solution.

  (2) also, there is a problem if I activate the BIOS setting LAN/WLAN switch automatically change between LAN and WLAN when I remove the laptop frome the docking station. If I activate it, Windows will not start corretly. It is extremely slow and makes noise from the speaker and I have to force down by holding the power button.

  Any suggestions?

  Thank you!

  / Peter

  Peter

  Please update the Bios first "turn off the Virusscanner for all installation process.

  The LAN driver update

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5403908&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_128382_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  After the restart the driver WLAN

  http://www.Intel.com/p/en_US/support/detect

• The Safari icon in the dock has a big question mark above.  What does that mean?  I stop and restarted, but the question mark is still there.  Help please.

  The Safari icon has an exclamation mark that covers.  What does that mean?  How can I get rid of him?

  I closed my Mac and restarted but it's still there.  Help please.

  Susan,

  Remove Safari from the dock icon. Then, go to your Applications folder and launch Safari from this location.

  

• Disappears from the main window of the activity monitor

  I'm under El Capitan 10.11.5, 15F34 build on an iMac (retina, 5K, 27 inch, mid-2015). If I open the activity monitor, I get the CPU usage, but the main window will briefly appear and disappear. If I minimize and restore, I also get it for a fraction of a second and then it seems to fall back on the dock. The history of CPU option (cmd 3) is grayed out, although I can get it as the icon in the dock.

  My question, then, is what caused this problem and how to restore to normal activity monitor?

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

• Update Firefox lost it of Wharf logo, shows only the generic Mac App logo

  After update to 17.0 for Mac, I lost my Firefox, the dock shows only the generic Mac App logo.

  Try this:

  • Remove the Firefox icon from the dock.
  • Create a new icon by dragging the Firefox application to the dock.
  • [883573/questions/883573]

• Y510p iPhone USB disconnect and reconnect

  Hello I recently bought a Lenovo Y510p, and for some reason everytime I try to plug my iPhone 4 in ONE of the USB ports on the laptop, it just repeatedly connect and reconnect every second or two. I installed iTunes already so I'm sure that the correct drivers for the iPhone are here. Any other USB device connects fine when it is plugged in, with the exception of my iPhone. I tried several USB cables also. He sees very well if I plug it into the "USB" always on when the laptop is turned off, but not when the laptop is turned on. Any help?

  I had the same problem with my iPhone 4 and Lenovo USB 3.0 docking station. The question in point 8.1 of Windows (64-bit) was that in the power management section, you must disable (OFF) on both) 1 battery and 2) plugged of "USB selective suspend setting."

  You can find this setting in [Power Options]--> USB settings--> USB selective suspend setting--> on battery: [disabled] and plugged: [disabled]

• Profile of hardware in Windows 8?

  Separated from this thread.

  Has anyone found a solution for this yet? I have a surface of 3 pro on 3 x 23-inch monitors. With the help of graphics cards hp usb to connect (Displaylink) but its very messy and unstable. I think that if I turn off my screen Surface while in the dock, it might help questions.

  Hardware profile have been removed from the victory of Vista in the rooms

  You might find a Matrox multi material more suitable display device.

• Adobe flash cc 2015 disappeared from the Applications folder

  I just noticed that the Adobe Flassh CC 2015 icon in my dock now displays a question mark icon. I looked in the Applications, and it's gone. Also, it is not listed in the application of creative cloud with all other CC applications Manager.

  If it has been abandoned?

  If this is not the case, how can I reinstall it?

  the name 'flash' is no longer supported.  What was flash is now called animate.

  Check your applications folder to animate cc 2015

• Zbook G3 HP: HP Zbook Thunderbolt 3 Dock USB ports not working not

  I have a HP Zbook Thunderbolt 3 dock on my HPZbook G3.  I've recently updated the BIOS and the firmware to the latest version to solve other problems 'dock '.  Am now at the latest for both.  The two monitors and ethernet on the work of lightning 3, but none of the USB ports are active.

  I am sure that the USB ports work, because they used to work before the update BIOS and firmware.  Keyboard, mouse, or USB memory on the dock work.

  I tried to go to the HP support and install the updates with the USB in it, but it didn't work.  I have a workaround - just connect the laptop directly, but I'd like to get my fully functioning dock.

  Device Manager does not display devices with questions.  I'll try to update, but I don't know which one to look at.

  

  Hey people,

  HP is dedicated to providing quality products to meet the needs of our customers. We listen to the customer feedback on our recent Thunderbolt Dock for use with the latest products ZBooks, and Elite Notebook. We continue to work with our customers to solve problems.

  Please find tips and updates to improve your use of the HP Thunderbolt docking station.

  1. The Thunderbolt dock uses the latest technology thunderbolt. To be fully functional, it takes the latest firmware, BIOS, and drivers to work properly. Please follow the step by step process as described below in "The process of updating your device".
  2. Here are links to the user, technical white paper guide helps and guides troubleshooting. Please, use them to help when you have problems after you have fully updated your device and platform by following the instructions above. Please note that you may copy and paste the links in your browser.
  3. If you still have any questions, please call HP support. We're here and eager to help succeed you using the HP docking station new Thunderbolt.

  Useful links

  User Guide: http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=11122586 & docLocale = en_US & docId = emr_na-c05141189

  Technical white paper: http://www8.hp.com/h20195/v2/GetPDF.aspx/4AA6-5088EEW.pdf

  Help & troubleshooting the Dock: www.hp.com \support\thunderbolt3dock

  Process to update your device

  NOTE: Instructions below is found in the User Guide "Getting Started" to "Implementation of the dock" to "step 2: update your computer.

  Before connecting the dock to your computer, update the BIOS, software and drivers on your computer.

  NOTE: If you do not, the wharf may not work. For best performance, keep all software and drivers on your computer up to date. (See table 1)

  Update the BIOS and the software and drivers:

  1. Go to http://www.hp.com/support. Select the drivers and Get software, enter your model of computer (on the computer service tag) number, and then select search for my product.
  2. Click the link for your specific computer, select your operating system and then download the latest version

  BIOS, software and drivers as follows: Intel® Thunderbolt Firmware Update Utility, Intel's Thunderbolt

  Secure Connect Driver, graphics drivers, ASMedia eXtensible Host Controller Driver, Broadcom Ethernet

  Controller and driver Conexant USB driver.

  1. Install the latest version of the BIOS.
  2. Restart the computer.
  3. Install the last stroke of lightning Secure Connect driver Intel.
  4. Restart the computer.
  5. Install the latest Intel Thunderbolt Firmware Update Utility
  6. Restart the computer.
  7. Install any remaining updates in any order. Restart the computer after each update.

  Table 1

  For the products supported Thunderbolt Dock all HP
  Name of the component	Category on the Support Page on hp.com	Where to check (this applies to all laptops)
  BIOS	(BIOS)	BIOS F10 Setup to information system
  Intel's Thunderbolt course connect driver	(Pilot - controller)	Right click on tray icon Thunderbolt to settings for details.

  The Thunderbolt of Intel® firmware update utility

  (Firmware)

  Right click on tray icon Thunderbolt to settings for details. Note that the numbers on the left will not directly reflected. NVM Firmware Version: 16 PD Firmware Version: 1.07.03

  Intel Graphics Driver

  (Driver - graphics)

  Right click on the desktop to graphic properties (icon intel) Options & Information Center Support.

  NVIDIA graphics driver

  (- Graphics - Nvidia driver)

  Right-click on the desktop to NVIDIA control panel to information system at the bottom left.

  AMD graphics driver

  (Driver - graphics)

  Right-click on the desktop to graphic properties (top) to Information to software.

  ASMedia eXtensible Host Controller Driver

  (Driver - Chipset)

  Programs & features or the Device Manager to Universal Serial Bus Controllers (dock of needs to be connected).

  Of Broadcom Ethernet controller driver

  (Driver - network)

  The Device Manager to network adapters (dock of needs to be connected).

  Conexant Audio Driver USB

  (Audio - driver)

  The Manager of devices to sound, video and game controllers (dock of needs to be connected).

  BPPSQ-

  I work on behalf of HP

• HP ZBook 15 G3: BSOD when connecting to the HP Elite Thunderbolt 3 docking station

  I recently (yesterday, 16/08/16) began to experience the dreaded Blue Screen of Death, whenever my laptop is connected to my HP Elite Thunderbolt 3 Dock.

  The machine is a HP ZBook 15 G3. It was connected to the docking station for more than a month without this problem. I don't know why at the time because I don't remember any updates or new software before that happens.

  The dock is connected to 2 x monitors via HDMI cables and an ethernet cable. I connect a mouse and wireless keyboard to a USB3 port on the laptop.

  If the dock is connected to the laptop at the start, he reached the login screen front of BSOD. If I start without it connected, it will be BSOD a few seconds after connecting the dock. He never to the point where the monitors display anything. It can be started with the dock connected in Safe Mode, as it seems to disable job.

  I've updated all the drivers and BIOS (including download the Softpaq Download Manager), but there has been no change. I have also updated the NVIDIA drivers to the latest version without change.

  What should I do next to solve the problem?

  Did you analyze the dump files, they said?

  I would also like to update these:

  Intel's Thunderbolt sure Connect utility (15.3.40.275)
  Thunderbolt from Intel for the Dock Thunderbolt from HP (16.1.7.0.8) Firmware update
  ASMedia eXtensible Host Controller Driver (1.16.35.1)
  ASMedia ASM1042A Firmware Update for HP Thunderbolt 3 Dock (131025.10.11.23)

  More BIOS if you're not on 1.09 or 1.10, some people say that they have problems with 1.10, so maybe try downgrade to 1.09.

  You can also try experimenting with the 'Thunderbolt security level' setting in the bios security switching No. If it is authorized by the user, or vice versa.

• Zbook dock: Zbook Dock: appropriate equipment

  Is August 3, troubleshooting guide to sign must "click the remove safely icon in the notification area, at the far right of the taskbar".  Where is this icon?  I have the icon of love at first sight, but it does not offer any option to delete.  The link is:
  
  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=11122586 & docLocale = en_US & docid = emr_na-C0...
  
  In this same document he links to dock Zbook (4AA6-5088EEW) white paper that says for the cable, just pull "to remove the HP Elite docking station with Thunderbolt 3 or HP ZBook with Thunderbolt 3 in your HP laptop or HP ZBook Mobile Workstation, it is recommended to first disconnect the dock wait icon Thunderbolt (see Figure 3) in the system status bar is gone then put the laptop or. "mobile workstation in the waking state, hibernation, restart or stop.
  
  Which is correct?

  I think I solved the problem to my satisfaction, I hope it helps others.

  Also, I tried to get more information of HP chat support, but they left hear only the computer off and then unplug.  It would be the 3rd option HP (and the worst option) to follow no real clarity on the procedure of HP.  The Zbook attach end of nightmares?

  I believe that the white paper (4AA6-5088EEW, August 2016) made the most sense, although it may lack key information:
  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/4AA6-5088EEW.PDF

  The white paper says to unplug the dock (without preparation), what seems dangerous to me.  Only, I'm ready to do if the USB devices plugged into the dock to comply with Windows "Rapid withdrawal" of the policy in the Device Manager settings.  The keyboard and the mouse need not of settings, since they are different profiles of USB.  Someone braver than I can try to ignore the parameters of "Quick release" to find out what's going on :-).

  The political "quick withdrawal" is not set, then if the option 'Remove the device safely' with the icon of USB in the bar of tasks, firstly, and THEN do the Zbook dock disconnect.  I think that's what the document online tried to say in words very confusing and lacking other details:
  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=11122586 & docLocale = en_US & docid = emr_na-c05060909

  So far, I didn't re-docking on the fly and disconnection problems.  I run all the latest Zbook 15 G3 drivers, BIOS 1.10 etc, for those who want to know.  More a few bug fixes for the Zbook dock and it will be a good product.

• HP Zbook 15 3, Thunderboltdock: Ethernet on dock thunderbolt will not work

  I have problems with my dock Thunderbolt 3 150W and my Zbook 15 3 ethernet, Windows 7 / 64-bit.

  I had many issues before with the system after an update of the BIOS (slow performance, usb poorts this work would ' t, windows that would not download updates, ect.). I read a lot of postst similar problems. The material was exchanged by HP, but the problems remain, and I found myself only to install the BIOS and updates. Thanks HP!
  After a long period of fiddeling I'm back at work.

  Except for the Ethernet on the quay of the lightning. Somehow the pilots are not inatlled / available. The Ethernet / WIFI on the laptop works very well, but not on the dock.

  I don't know where to find the right drivers / how to install them. Who can help?

  

  I have the Zbook 15 G3 workstation Mobile using the Zbook Thunderbolt 3 dock:

  http://WWW8.HP.com/us/en/workstations/zbook-dock.html

  I send you this on the Zbook connected to the dock using its gigabit ethernet port. HP Support Assistant provided all the drivers needed for the dock. Here is the screenshot of my device manager:

  

  What is your device under network devices Manager? The Intel ethernet is built in the and the Broadcom NetXtreme is ethernet in the dock. HP has drivers for both on the support page for Windows 10 64-bit on the Zbook G3 home page.

  I got a little difficult at first to get the dock to work, but I went into BIOS and disabled all the security settings of Thunderbolt. If you need any help post more come back.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Zbook 15 3: 3 15 Zbook and compatibility issue P5Q58UT #ABA dock

  Say, if I browse the site, dock compatibility sheet tells me Zbook 15 3 is to use the P5Q58AA docking station, but it is a bit expensive.

  Surfing the net, I found #ABA P5Q58UT who seems very similar to the plug and the model number and half price... is it compatible with 15 3?

  Thank you

  gSal

  I the Zbook 15 G3 Mobile WS model and uses the dock P5Q58UT #ABA with him and I'm sending this reply from her with the attached dock. Have a 4K and the FHD monitor attached to 2 DP ports on the dock. The power cable from the cradle to the computer is unique to the Zbook AFAIK. It is a thing with two heads with a power outlet right next to a socket on the USB - standard.

  But in any event I can confirm the dock you buy will work fine.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Zbook 15 G2: 90W Docking for G2 Zbook 15 HP

  Hello
  
  I just got 15 G2 Zbook and currently looking for a docking station as I mainly use with combination of monitor / keyboard/mouse + speaker in my office.
  As this laptop is big enough with her just as heavy power brick, I realized I'd better go with a cradle to attach/detach every day easy.
  
  http://WWW8.HP.com/h20195/v2/GetHTML.aspx?DocName=c04287869
  I think that I need the base dock (not advance)
  
  So some research on the internet suggest the dock suitable for HP 15 Zbook is the one who has power of 230W (it makes sense since his plant power brick is 150 watts), but I also see a provided 90W is much cheaper... and I have a vague idea that the extra power in the 230W is simply to allow you to successfully operate the peripheral elements at one time.
  
  Because I do not want to connect or Garland all hungry pyromecanismes, is there a chance 90W docking would be able to hold?
  
  Kind regards
  
  Razz

  For anyone interested, I went with Dock 120W and my laptop works very well (without warning/no or "running food" error message). No performance degradation whatsoever.

  My configuration:

  Docking station HP Zbook 15 G2 + HP 2012 120W + Displayport monitor + keyboard/mouse wireless + 1 or USB 2 low power devices (Smartphone/Portable HDD)

  In addition, I discovered that some people also have success using 90W dock, but it's anecdotal. I can't really confirm.