zero text file filter detection table 2d
A drawing on that space. I have a text file that represents a distance 2d array in column 1 and the voltage in column 2. You will need to search for file and extract the crossing value of zero and the corresponding value to the distance. Once completed, it had to subtract 2 consecutive values to determine the distance between the 2 break points. Should do this for all dispatchers of zero.
So if my filters to 11,21,32,41,51,61... So the 21 / 11 = 10, 32-21 = 11, 41-32 = 9, 51-41 = 10, 61-51 = 10...
Thanks a lot for your help.
Happy Thanksgiving...
First enter data in LabVIEW (perhaps spreadsheet 'at the table' or similar).
Well, you'll have a crossover when you have a - ve to + ve (or + ve - ve) transition. [I mean by going here <0 to="">0 or > 0 to]<0, i'm="" ignoring="" positive="" and="" negative="">0,>
Just so scroll until you find these transitions.
Note: you should also check the values = 0 because they will be a crossover, but not a sign related to the transition (as defined above).
If you have a value = 0 then cross it is here
If this is not the case, just use interpolation to find.
You can then build a table with the filters that you go through.
You can then navigate the differences in this conclusion.
0>
Tags: NI Software
Similar Questions
-
How to load the text file into a table and retrieve data line by line?
I'm looking to help understand how to open a text file, each line in a table of load. The data will be called to change the content of the text layer. Thanks for any help.
I did not test this code, but something like
var a = [];
var f = new File (Folder.desktop + "/ TestFile.txt");
If (f.open ('r')) {}
While (! f.eof) {}
a.push (f.Readln ());
}
f.Close ();
}
Alert ("I read" + a.length + "lines in the file.");
for (var i = 0; i)< a.length;="" i++)="">
DoSomethingWithThisLine (a [i]); //<-- you="" need="" to="" write="">-->
}
-
Display of text file as external table without trimming spaces
Hi all:
I am trying to display a text file of db break with initial spacing.
Well, it is not entirely related to the APEX.
It's table how external is created:
create the table u_x
(rowline varchar2 (255))
EXTERNAL ORGANIZATION
(
TYPE ORACLE_LOADER
DIRECTORY by DEFAULT ext_tab <-this is a dir command I created
access settings
(
records delimited by newline
notrim fields
)
LOCATION ("aaa.txt")
)
REJECT LIMIT UNLIMITED;
on the first line of the aaa.text (it's a report), it shows something like:
Sat Dec 29 Page 1
but when I select * from u_x, the result is:
Sat Dec 29 Page 1
all them above is done in the workshop sql command /sql APEX 4.2.1 (db 10.2.0.5)
Is it possible to preserve the spaces between "29" and "Page"?
(the result compressed all the in-between spaces instead of 1).
I think that the ideal way is to invoke Notepad to the customer to open the text file of the server.
in any case to generate the link?
Thank you
John
Finally, he made inside:
Application Builder > application 110 > Page 8 > report attributes > column attributes
with:
Column formatting
CSS class:
CSS style: white-space: pre; do-family: monospace;
If do in the header of the region, have to use this report template: default: HTML (Standard) \\u
Thanks for your help!
BTW, used classic report
-
Load the data from a text file into a table using pl/sql
Hi Experts,
I want to load the data from a text file (sample1.txt) to a table using pl/sql
I used the pl/sql code below
***********************************
declare
f utl_file.file_type;
s varchar2 (200);
c number: = 0;
Start
f: = utl_file.fopen('TRY','sample1.txt','R');
loop
UTL_FILE.get_line (f, s);
insert into sampletable (a, b, c) values (s, s, s);
c: = c + 1;
end loop;
exception
When NO_DATA_FOUND then
UTL_FILE.fclose (f);
dbms_output.put_line('No. deles de lignes insérées: ' || c);
end;
***************************************
and my sample1.txt file looks like
***************************************
1
2
3
***************************************
Gets the data inserted, with way below
Select * from sampletable;
A, B AND C
1-1-1
2-2-2
3 3 3
I want that data to get inserted as
A, B AND C
1 2 3
The text file I have is to have three lines, and the first value of each line should go to each column
Help, please...
Thank youdeclare f utl_file.file_type; s1 varchar2(200); s2 varchar2(200); s3 varchar2(200); c number := 0; begin f := utl_file.fopen('TRY','sample1.txt','R'); utl_file.get_line(f,s1); utl_file.get_line(f,s2); utl_file.get_line(f,s3); insert into sampletable (a,b,c) values (s1,s2,s3); c := c + 1; utl_file.fclose(f); exception when NO_DATA_FOUND then if utl_file.is_open(f) then utl_file.fclose(f); ens if; dbms_output.put_line('No. of rows inserted : ' || c); end;
SY.
-
Importing data from a text file in a table
Hi Experts,
I have the following flat file
I need to insert the data that it contains in the following tableweekly_eft_repo 1.0 Page: 1 CDC:00304 / Sat Oct-31-2009 Weekly EFT Sweep for 25/10/09 - 31/10/09 Effective Date 03/11/09 Sat Oct-31-2009 22:06:14 ---------------------------------------------------------------------------------------------------------------------------------- Bill to Retailer Retailer Name Name on Bank Account Bank ABA Bank Acct On-line Amount Instant Amount Total Amount ======== ============================== ============================== ========== ==================== =============== =============== =============== 0200101 Triolet Popular Store Triolet Popular Store 111111111 62030100130659 10,868.00 0.00 10,868.00 0200103 Le Cacharel Snack Le Cacharel Snack 111111111 62030100130813 9,728.00 0.00 9,728.00 0200104 Advanced Co-operative Self Ser Advanced Co-operative Self Ser 111111111 111111111 7,334.00 0.00 7,334.00 0200105 Chez Popo Supermarket Chez Popo Supermarket 111111111 61030100044898 30,932.00 0.00 30,932.00 0200106 Vana Supermarket Vana Supermarket 111111111 111111111 17,775.00 0.00 17,775.00 0200107 Mont Choisy Store Mont Choisy Store 111111111 62030100130804 8,840.00 0.00 8,840.00 0200108 Vijay Store Vijay Store 111111111 62030100131229 16,416.00 0.00 16,416.00 0200109 Neptune Confection Neptune Confection 111111111 62030100130931 11,077.00 0.00 11,077.00 0200110 Antoine Store Antoine Store 111111111 111111111 2,470.00 0.00 2,470.00 0200111 P.S.C Cold Storage P.S.C Cold Storage 111111111 111111111 10,431.00 0.00 10,431.00 0200113 Mini Prix Boutique Mini Prix Boutique 111111111 62030100131501 26,315.00 0.00 26,315.00 0200114 Hotel Cassim Hotel Cassim 111111111 111111111 135,147.00 0.00 135,147.00 0200116 Aman Snack Aman Snack 111111111 62030100129481 7,334.00 0.00 7,334.00 0200117 Best For Less Company Ltd Best For Less Company Ltd 111111111 111111111 3,325.00 0.00 3,325.00 0200118 Central Way Central Way 111111111 111111111 25,137.00 0.00 25,137.00
What is the easiest and best to proceed on this?TABLE weekly_eft_report_temp Name Null? Type ----------------------------------------- -------- ---------------------------- BILL_TO_RETAILER NOT NULL VARCHAR2(15) RETAILER_NAME VARCHAR2(100) NAME_ON_BANK_ACCOUNT VARCHAR2(100) BANK_ABA VARCHAR2(1) BANK_ACCT VARCHAR2(1) ON_LINE_AMOUNT NUMBER INSTANT_AMOUNT NUMBER TOTAL_AMOUNT NUMBER
Thank you
KevinIf that's what you're looking for, then you can do
with t as ( select 'BILL_TO_RETAILER' col1 from dual union all select 'Some unwanted info' from dual union all select 'Some unwanted info' from dual union all select '==============' from dual union all select 'Actual Data' from dual union all select 'Actual Data' from dual union all select 'BILL_TO_RETAILER' from dual union all select 'Some unwanted info' from dual union all select 'Some unwanted info' from dual union all select '==============' from dual union all select 'Actual Data' from dual union all select 'Actual Data' from dual ) select col1 from ( select col1, last_value(val ignore nulls) over(order by rno) val1 from ( select t.*, case when col1 = 'BILL_TO_RETAILER' then 1 when regexp_like(col1,'=+') then 0 else null end val, rownum rno from t ) ) where val1 = 0 and not regexp_like(col1,'=+')
-
How to load the date and time from text file to oracle using sqlloader table
Hi friends
I need you to show me what I miss loading date and time text file in a table oracle using sqlloader
It's my data in this way (c:\external\my_data.txt)
my table in the database emp27369,SMITH,17-NOV-81,09:14:04,CLERK,20 7499,ALLEN,01-MAY-81,17:06:08,SALESMAN,30 7521,WARD,09-JUN-81,17:06:30,SALESMAN,30 7566,JONES,02-APR-81,09:24:10,MANAGER,20 7654,MARTIN,28-SEP-81,17:24:10,SALESMAN,30
the code for the control in this path (c:\external\ctrl.ctl) filecreate table emp2 (empno number, ename varchar2(20), hiredate date, etime date, ejob varchar2(20), deptno number);
This is the error:load data infile 'C:\external\my_data.txt' into table emp2 fields terminated by ',' (empno, ename, hiredate, etime, ejob, deptno)
any help that I enjoyedC:\>sqlldr scott/tiger control=C:\external\ctrl.ctl SQL*Loader: Release 10.2.0.1.0 - Production on Mon May 31 09:45:10 2010 Copyright (c) 1982, 2005, Oracle. All rights reserved. Commit point reached - logical record count 5 C:\>
Thank you
Published by: user10947262 on May 31, 2010 09:47load data
INFILE 'C:\external\my_data.txt '.
in the table emp2
fields completed by «,»
(empno, ename, hiredate, etime, Elysa, deptno)Try
load data infile 'C:\external\my_data.txt' into table emp2 fields terminated by ',' (empno, ename, hiredate, etime "to_date(:etime,'hh24:mi:ss')", ejob, deptno)
This is the error:
C:\>sqlldr scott/tiger control=C:\external\ctrl.ctl SQL*Loader: Release 10.2.0.1.0 - Production on Mon May 31 09:45:10 2010 Copyright (c) 1982, 2005, Oracle. All rights reserved. Commit point reached - logical record count 5 C:\>
This isn't a mistake, you can see errors in the log file and bad.
-
Control the Structure of the event with text file
I'm new relativaly in LabVIEW (experience only about 2 weeks). I am currently control a stepper motor using a structure of the event. Similar to the sample code given by LIFA, I entered my settings how the engine not move away, then press a button on the windows before, and it works this way. I also have other equipment that works as well in LabVIEW, as a transnational step; all components operate individually.
Now, I'm trying to make the more automated system and to ensure that all the different equipment work in the same code. So, I tried to implement a structure of the event using a text as an input file to try to control events. The text file has a table 1 d of numbers going down vertically (only the line numbers change). So, I used a table of index function to take the numbers one by one, use a loop (while loop in this example) to go to the bottom of the column of numbers. However, the event not register the change, even if the indicator shows the value is changing.
Attached, it's my test code and the text file that I use to try to control the structure of the event. Please let me know what I am doing wrong. Thank you.
Oh, now I understand what you tried to say. I'm using a loop and a case structure to activate different events with the entries in the table. I thought case structures and event were the same, but you taught me the event structures are used just for the façade stuff. Thank you all!
-
Hello world
Once again I have some difficulty.
I'm trying to control Goepel Cascon with my labview. What I basically want to achieve is:
I want a configuration file that contains a part of the serial number of my share a name. The serial number is parsed as a string of alphanumeric one limited to the first 10 characters. Now, I want to find the line in the text file that this shorter string is also written in as the name that is separated by a tab number is supposed to be read by labview and transmitted.
All this is necessary for my final program when the apllication is generated can be updated just by writing new things in a text file.
Thanks for help.
Michael
It would be useful that you can attach the text file. Basically for your scenario, you can read the text file in a table 2D-string with 'Tab' as delimiter and find the serial number and the name of the party. Come back if you face any problem.
-
AppleScript - extraire extract values from a table, create a text file with these values
Hello world
Lets say I have a table that looks a bit like this
And this table I would create 2 text files (or even more, depending on how many switchnames are there) who look a bit like these
Is it still possible?
I suppose to create a Service (which can be called in numbers) with Automator which includes an Applescript script - but - no idea since the script is not one of my strong suits.
There is not need to be perfect, because tables are not necessarily the model presented above - so to tweek the script to the application will be necessary. The text files can be created/saved in the same folder as the file numbers is in.
Y at - it script-genius out there?
See you soon
Florian
Select the column of fist of the data, and then run this script by copying the Forum and paste it into the script editor. The files will appear on the desktop
say application "Numbers".
say front document to tell the worksheet active
say ( class is worn) fromfirst table whose selection range
selectionRange defined in column 1 of the selection
set cnt to 0
the value destRange for range
the value currentList to {}
-the list of switches
Repeat with acellule in selectionRange cells
-say acellule to set the value on the NTC
pass the value to the value of cell
if and ((cnt > 0) (switch is not missing value) and (currentList is not contain switch)) then
switch and the value in the currentList currentList
end if
NTC put to the cnt + 1
end Repeat
-Display dialog box "to the list of items is:" & currentList & "a list" & (currentList County) ".
Repeat with aswitch in currentList
" game textOut to '# Script generated with Applescript for switch' & aswitch &"
# on "& (today's date) &"
!
conf t
"
set cnt to 0
Repeat with acellule in selectionRange cells
-say acellule to set the value on the NTC
pass the value to the value of cell
-Display dialog "aswitch is []" & aswitch & "] and switch is []" & switch & "]".
if (aswitch contains the switch) then
the value cellCol to address a column of first cell of acellule
address of line of first cell value cellRow in of acellule
value to the aport (value of the cell of the column (cellCol + 1) cellRow) integer
the value vlan for the (value of the cell cellRow of column (cellCol + 2)) integer
the value desc to the (value of the cell cellRow of column (cellCol + 3))
" put to textOut textOut &.
!
"" IG 1/0 interface / "& aport &.
switchport mode access
switchport access vlan "" & vlan & ""
Description LINK TO "" & desc & ""
"
on the other
-Display dialog box "did not: []" & aswitch & "] and []" & switch & "]".
end if
NTC put to the cnt + 1
end Repeat
Set myFile to open for access (path to the Office as text) & aswitch & '_output.txt' the with write permission
textOut write to myFile
MyFile close access
end Repeat
end say
end say
end say
-
HOW CAN I SEND A TABLE TO A TEXT FILE
Hello
I have a table with a lot of values, and I need to transfer this table to a text file (.txt), without losing the position
These values in the table. Can someone help me with this?
THX
Or you can use scripture to the worksheet File.vi
~ Jonathan
-
Print table with decimal places in text file
Hello
I tried to find this information on the forums, but I can't seem to find exactly what I'm looking for. I VI that when it's finished has a 2 column and row table 5 or more which is filled with thermal loads and corresponding tensions. I want to print this table to a text file, but I want to understand decimals in at least the tension. I've attached what I have, thanks in advance
The answer is on your pc. If you have the open Help context, click the detailed help. There is a link here on the format specifiers. You use %d which tells the function to convert whole numbers. You want %f for floating point numbers.
-
Reading a text file and store it in a table, guard return 0.
Hello, I have an application where I need to read the speed and rate of a text file. For this application, I use a myRIO NEITHER and I want to save the text file on the drive the myRIO aboard in the tmp folder. I simplified my request to isolate the possible problem and I will attach a sample text file and my VI is used.
Overview:
I use a myRIO project because in my real application I myRIO VI of PWM and encoder. I noticed that my problem goes away when just open the main VI and run the application in LabView. My problem then that chairs the VI on a project myRIO folder.
To address the issue:
My question is, when running the VI of the hand of a project myRIO folder everything works as it is supposed to, but when you open the text file in my Subvi, it returns 0, as if nothing is in the text file. Now if I open the VI outside myRIO se project file it works just assumed that when X = 1, it opens the text file written data in a table and then close the text file. I can't understand why he reads nothing in the text file executing the main VI of a project of myRIO and when I use run to highlight one can see it opens the text file and then returns nothing. The text "test" file must be placed in the tmp folder on board the myRIO to validate my way.
Is there a way to fix this?
I assume because I use a myRIO project I can't access the file text, or because of how LabView?
Any help is appreciated, thanks in advance!
You don't have your son wired error upward. You're files showing error functions?
What context are you running VI when you are within the project and what context from outside the project?
My suspicion is that in one case, you run on your PC, the other on the cRIO. Your file exists only on one device or the other. And also that when you change your PC for the cRIO, your file path must change. It's very strange that your watch VI access you the disk R:\. I bet that the R:\ car n does not exist on your cRIO.
-
Hoy to convert an Ascii text file table
I'm trying to parse this file in a table (can also be a spreadsheet), but there is no way to make the separation by spaces.
Any idea?
Attached the text file.
Victor
This can be a good starting point.
-
write the table in its entirety in text file after completing the data collection
Dell NetBook, Windows XP home, OR-6008, Labview 8.5.1
I read a psydo real-time app 8 analog signals at 100 Hz. I can't write directly to a file of data during data collection (processor flash drive to slow down), but can store 4 2D tables separated, with one added timestamp data. Once I finished collecting data, I would record each table in a separate text (csv) file. Using takes a loop for in long and using the 'picture to a worksheet string' add labels that I can't change. I'm climbing down a text file of 3 columns and lines equal the number of samples, I've collected (e.g., a 1 minute session would be 6000 rows and 3 columns).
1,1.3,1.5,
2,1.2,1.4,
3,1.4,1.1,
4,1.5,1.2,
5,1.4,1.4,
etc.
Thank you
Troy
-
table Oracle in a delimited text file
Hi all
How you export data from an oracle table to a delimited text file?, I think the answer should be used the exp tool and specify the delimiter in the control file. Please correct me of you to be sick. Thank you
Search for:
UTL_FILE
https://asktom.Oracle.com/pls/asktom/f?p=100:11:0:no:P11_QUESTION_ID:88212348059
See you soon,.
Manik.
Maybe you are looking for
-
Hello, I put my favorites on my external hard drive, and no I can't put them in firefox
Hello, I made in the past set my favorites on my drive hard extern and now, I wanted to put them in firefox, but it does not work. What could do?
-
Satellite A300 starts spinning on the cover
Hi all This is my first post here. I have a laptop Toshiba Satellite A300 and lights up whenever I close the lid/screen of the laptop it self.After having reduced the media bar above the keyboard, I found that if I turn the laptop and then press on t
-
Satellite mic C50-B-12V-can always works, even after as I plugged in the headphones?
Hello My C50-B-12V Satellite comes with a single port for headphones and microphone. so, if I'm on a Skype call and want to hear more clearly - so I plug in headphones, then the other party ceases to be able to hear me - probably because my headphone
-
Satellite Pro L770-149 - cannot get working Wlan
Hello I recently rebuilt a Toshiba Satellite Pro L770-149 with windows 7 64 bit, when I installed first the operating system, all the drivers were missing so I installed all of the correct drivers and had run as it was before. Form Apart wireless con
-
98% of the time that I print with black ink custom setting only in draft mode to save ink. I noticed recently that was not only my black cartridge low on ink, but also that my color ink cartridges were low. Is it possible that when the black ink ca