Zire 31

Similar Questions

• Zire 21 Reset

  After reset my Zire 21 and made Hot Sync from my PC, all instructions on your handheld are in English, but on PC are in French (all data are always in French. No problem).

  Please what should I do to change the language of the Instructions?

  Thanks a lot for your answer.

  Hello and welcome to the HP support community!

  You must reset the Zire 21 tough and erase all data.  If you have a model International (EFIGS), you will see an option to choose the language when the device restarts.

  If the Zire 21 is an "American" model, then English is the only language it has installed.

  To perform a hard reset:
  
  By now the power down button, press on and release the Reset button on the back and continue to press the Power button. When the gray Palm logo is displayed, you can release the Power button.
  
  You should now see the warning in 5 languages page. Press the direction upward on the 5-way keypad to perform the task. The Palm restarts several times as it re - install the original programs and erases all data from your previous.

  Make a HotSync to return data from the user for the device.

  WyreNut

• Dead Zire 21 - new battery need? How to disassemble?

  Hello everyone, I'm new to this forum. Hope you can help me a bit with my little experience of Palm.

  I had a Palm Zire21 that has some problems with turning the power on. It does not seem to load. At least, I couldn't find any screen it does. How can I check whether or not it requires? Should there be something visible on screen?

  In addition, when it running on the power supply and the connection via USB to the computer it does not appear. I was expecting to see here when it is powered. So I think that the battery may be dead. Is this feasible? I tried to disassemble the appliance but do not know how. On the back there are two Torx screws. I can't release them. I have to? Otherwise, how can we separate the housing of the electrical inside without destroying?

  Connect the power supply and leave your handheld on charge overnight. After recharging, let the pocket computer plugged into the power outlet and press the reset button several times on to see if the device turns on. If so, you should get a battery icon with a lightning bolt through it to indicate the battery is charging.

  If your handheld turns on not following these steps, you can call Palm to set up a repair. The price to repair the Z21 by Palm is $ 75.00.

  There are Internet sites that have spare batteries and some directions of the repair. Search for Palm zire21 battery.

  For reference purposes, click the following link to the support page for your device on the kb.palm.com Web page.
  http://KB.Palm.com/wps/portal/KB/na/Zire/21/unlocked/home/page_en.html
  
  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

• Palm Zire 71 works only with Windows Vista

  I recently updated a program that I use on my desktop and sync with my Palm Zire 71. To get the new update on my Palm, I tried to use Palm quick install. I believe that this does not work with Windows Vista!  What are my options?  I don't know how to get this update on my Palm so that I can synchronize my data between my desktop and Palm Zire 71. Any suggestions for this?

  Have you tried right clicking on the shortcut to quick setup, or the .exe and select "Run As Administrator"?

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  This could be a useful resource too.

  Palm support
  http://KB.Palm.com/wps/portal/KB/common/article/44532_en.html

• ZIRE 21 hot sync is not compatible with vista 64-bit program

  ZIRE 21 hot sync is not compatible with vista 64-bit program - apparently it will work with 32-bit vista.  Is there a way to create a 32-bit only for the Zire 21 program without compromising the rest of my 64 bit OS computer? That's what Microsoft sent me. The help for this program was created in Windows format help, which was used in previous versions of Windows and it is not supported in Windows Vista.

  For more information, see Windows Help program (WinHlp32.exe) is no longer included with Windows on the Microsoft Web site.

  Laughing out loud

  You cannot change part of a 64 bit of Vista in 32-bit OS.

  32 bit and 64 bit OSs are completely different operating systems.

  See you soon.

  Mick Murphy - Microsoft partner

• Zire 72 s sync with Palm Desktop 6.2.2?

  Until now I used Palm Desktop version 4.1, which seems to have "disappeared" from my PC. I was HotSync with my 72 s Zire. It seems that the latest version of Palm OS downloadable Desktop (excerpt from the HP site) is version 6.2.2. Does anyone know what to download this latest version on my PC, then I'll be able to download information from my 72 s Zire and continue in the future HotSync. Or, put in other words, Version 6.2.2 work with Zire 72 s? If not, can you tell me where to download the 4.1 version of?

  Here are all versions of Palm Desktop. Officially, Zire 72 came with version 4.1.4e.

  http://KB.hpwebos.com/wps/portal/KB2/common/article/33529_en.html

• Zire 21 touch not responding

  I had a variety of Palm devices but have not had this problem before. I bought this on eBay a year ago Zire 21, but didn't really start using it until last month when my Zire 22 becomes unreliable. The touchscreen does not at all. When I turn it on, it's to alert page. I cannot remove all alerts, cannot go to the calendar with the button or using the touch screen.  Thanks for any help.

  Looks like a hardware issue to me, but if you have the data backed up safely via HotSync, then feel free to try a Hard Reset.

  But know that if it's a hardware problem, even a Hard Reset will not fix it.

  WyreNut

• Palm Zire 71 and Windows 7 - device is not recognized

  The computer does not recognize the device. It's like the USB port isn't there.  Nothing wrong with the port or connections.  Is this a compatibility issue with Windows 7 and the Palm Zire 71?

  Hi Marianne,.

  1. What is the exact error message you get when you try to connect to the device?

  2. what type of system of your computer (System 32-bit or 64-bit)?

  Palm Zire 71 is compatible with Windows 7 32 - bit system but incompatible with the 64-bit system.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&s=Palm%20Zire%2071&type=hardware&OS=32-bit

  I suggest to uninstall the installed driver for Palm Zire 71 software and reinstall them using once more.

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Also, connect the device to another computer in Windows 7 and check if it works very well.

• problem, plug the charger on my Zire

  I have an old Zire I used for about 10 years.  I think that I made a mistake and tried to put the needle in the hole for the battery charger. The result is that the charger is not 'connect' to the Zire... and the Zire tells me that the battery is low.  All the world had this problem?  Is there a solution? I really wouldn't want to lose all the data I have stored more than 10 years!  What's a guy to do?

  The male part may have broken free of the motherboard.

  Removable instructions (courtesy of Directfix.com)

  http://www.DirectFix.com/category/_ZIRETAKE.html

  WyreNut

• Palm Zire 31 16 MB handheld PDA with win7 64-bit computer

  can I use my palm31 with windows 7 64 bit?

  Hi jonjo22,

  Palm Zire 31 16 MB PDA pocket computer is not compatible with Windows 7 64 bit.

  See:

  Compatibility Windows 7 for computer Pocket PDA Palm Zire 31 16MB

• ZIRE M150 PALM COMPATIBLE WITH WINDOWS 7

  I have this Palm and need to know how I can get hot sync for Palm computer work if possible thanks.

  I have this Palm and need to know how I can get hot sync for Palm computer work if possible thanks.

  Hardware support, including but not limited to all the drivers and other software, is manufacturer of the equipment.  Microsoft did not your Palm Zire m150 - so that they do not support.  ;-)
   
  However, in looking at those who could...
  http://h30434.www3.HP.com/T5/Palm-OS-WinMo-hardware-and-software/Windows-7-and-Vista-HotSync-instructions-here/m-p/2039769/highlight/true#M32150
  and/or
  http://h30434.www3.HP.com/T5/Palm-OS-WinMo-hardware-and-software/Palm-Zire-M150-and-Windows-7-64-bit/m-p/2065696/highlight/true#M58077

  No guarantee.  The product just did not had been supported officially... and it's almost 11 years (since its release).

• Palm zire 72 link phone updater

  anyone knows where and how to get the palm zire 72 update phone link?

  http://www.Palm.com/us/support/downloads/PhoneLink.html

  Message relates to: Zire 72

• Zire hot sync

  Hello

  I'm having a hot-sync problem from my computer palm zire with my new computer Inspiron 1546, 64-bit, with a home premium to windows 7.

  Running hot Sync Manager I have the icon on the bottom bar of the right tool in the system tray is a USB and it is checked.

  When I enter all upwards in the system at the end of a synchronization operation hot tray a failure box appears.

  That is the selected port COM1 is not available at this time. HotSync manager will open the port when it becomes available. the premises of the port series is empty and I can't get into something is where COM1 should be.

  In the setup of the box I looked into the hot sync LOG this message if poster is. The logfile c:\program (x 86)-palm\johnsw\hotsync journal is not found.

  Hoping you can help me

  With regard to bill johns

  Hello billj, welcome to the Palm support community.

  Your question is asked here, on a daily basis.  I refer you to the thread of fat at the top of this section entitled "Windows7 and Vista synchronization instructions.

  In short, you cannot synchronize via USB to any 64 bit OS.  The company Palm Desktop factory (access to the Japan) seems to have no interest in updating the program to run on this type of operating system.

  WyreNut

• The Zire 31 data transfer and Tungsten E

  I am trying to get a Tungsten E to replace my broken Zire 31.  Can I easily sync my Contacts, calendar, data spending my Zire 31 office to the new office of Tungsten E and combined after installation of the software? or the installation of the new will scan all my existing data?

  Am hoping for a smooth transition without data loss.

  Thank you

  Click on the following link for the Web page of kb.palm.com for the article regarding the upgrade to a new device.

  http://www.Palm.com/cgi-bin/cso_kbURL.cgi?id=12926

  For reference purposes, click the following link to the support page for your device on the kb.palm.com Web page.
  http://KB.Palm.com/wps/portal/KB/EMEA/tungsten/e/unlockedeu/home/page_en.html

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

• Used palmone Zire 31 does not seem to work?

  Hi, I went to an antique store today and find a palmone Zire 31 for two dollars, so I decided to do. It has no cables, CD, anything. It's just the palmone zire 31 device and the thing of the pen. Well, I found a few USB cables that correspond to the House for my camera and stuff but when I plug the slightly illuminated screen. I thought it was good, but my computer doesn't recognise no and says it fails. Does this mean that it does not work? Should I just forget and not buy a new cord for this? Or are there special drivers, I need to work. And when the screen informed he would not light, up evenly, the sides light up a lot more, then the Middle so it couldn't just be broken and sold for parts. Wells and suggestions? Thank you

  I just went to bestbuy and tried the Chargers and my zire 31 will not even load or anything like that. If the mines a cool looking for paper weight.

  Thanks for the help, and I will pass on your offer on the zire.  Thanks tho