Zoom r16 output does not reflect the master Pro Logic output

Similar Questions

• Compiled CHM file does not reflect the name of the new project

  I have read many responses of experts to positions and have found them extremely useful is. However, I have not seen one that solves my problem.

  I have the HTML HR RH8 Version. I renamed a project through 1) file - rename project and 2) Single Source Layouts - main Layout - Properties - output folder and file name.

  Two problems are: 1) the name of the project file still reflects the old name of project and 2) the CHM file still reflects the old name of the project.

  Therefore, the output help the user displays a still the former name of the project in the title bar.

  Generated files like the RoboHelpHTML project file have been changed for the new name of the project, just like RENAME the PROJECTS using says it should. However, the CHM file does not reflect the new name of the project as it says it should.

  (1) can I change the name of the folder created when I compiled the help by exact name file?

  (2) can I change the FILE name in the window SELECT OUTPUT FOLDER AND FILE name?

  (3) I can / should I rename the names of table of contents and Index of the old project name for the new name of the project? (Help says changing the project name does not change these file names and he didn't.)

  None of these measures will correct the problem? I appreciate any help you can give.

  Welcome to our community

  Try file > project settings.

  And if that fails, try the pod project configuration, windows and change the caption of the window.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Error #5001: The name of package 'mapTools' does not reflect the location of this file. Please change the pa

  OK, it's a simple question. I have a mapTools package defined in the MapManager.as ActionScript file, as shown in the attached code. The directory structure looks lke this:
  
  C:\
  -\engine
  -------Media
  -\Flash
  -\mapTools
  -MapManager.as
  --------------------------- MAP.fla
  
  If the MapManager.as and MAP.fla files are in the same directory. So I open MAP.fla and when I do TestMovie I get this error:
  
  "5001: the name of package 'mapTools' does not reflect the location of this file." Please change the name of the definition of the package inside this file, or move the file. C:\engine\media\Flash\mapTools\MapManager.as ".
  
  What is the cause of this error?
  
  
  
  

  If she is the document class, replace the fla in mapTools and remove mapTools the package name.

• Get-vmhost does not reflect the number of correct hosts on a few scenarios

  Hello members of the community.

  When I try to use the cmdlet get-vmhost against a cluster that has one or no hosts in there, I don't get the number of correct hosts. Here are some lines for this information.

  foreach ($objDataCenter to $objColDataCenters)
  {
  $objColClusters = get-Cluster-location $objDataCenter

  foreach ($objcluster to $objColClusters)
  {
  $Details = $Null
  $objClusterBaseRP = $objHosts = $objDataStores = $objVMs = $Null
  $intNUmDatastores = $intNumHostCPUs = $intTotCPUMhz = $intTotUsageCPUMhz = 0
  $intTotMemMB = $intTotUsageMemMB = 0
  $CPUStat = $CPUStatMax = $MemoryStat = $MemoryStatMax = 0
  $intTotMemGB = $intUsageGB = $intMemResGB = $intMemLmtGB = 0
  $inttOTDiskCapacityMB = $intTotDiskFreeMB = $intTotDSCapacityGB = $intTotDSFreeGB = 0
  $intTotVMMemGB = $intTotVMCPUMhz = $intNumVMCpus = $intTotVMMemMB = 0
  $intTotVMProvisionedSpaceGB = $intTotVMUsedSpaceGB = 0

  $objHosts = get-vmHost-location $objcluster

  $objHosts.Count

  }

  }

  code above produce white for clusters that has one host for all other groupings that has 2 or several hosts results are correct. I know that there is no point of having a single node cluster or not, but the result does not reflect his decent stats.

  In the same way under lines also produce incorrect information to the cluster that has no HOST or a single HOST that is in maintenance mode and has no inside VMs

  $objVMs = get-VM-location $objCluster

  $objVMs | %{
  $intNumVMCpus += $_. NumCpu
  $intTotVMMemMB += $_. MemoryMB
  $intTotVMProvisionedSpaceGB += $_. ProvisionedSpaceGB
  $intTotVMUsedSpaceGB += $_.usedSpaceGB
  
  }

  When I print the values of all the variables above, it should report 0 instead I have the chance to see some numbers. Please note I have explicitly assign values $null to all objects and 0 in all other variables at the beginning of the loop for clusters.

  Any help to solve this is greatly appreciated - thanks

  Kind regards, Philippe

  Hello, Ramkrish-

  Welcome to the communities.

  For the first part, the number of hosts in a cluster with zero (0) or one 1 host - there are a number of things happening there.

  When the Get-VMHost call returns only one host, and you then try to access to the. Property of the count of $objHosts, you try to access this property on an object VMHost, not an array of length 1 with a VMHost inside.  And, since the VMHost object has no property '. " Count' you get a return of the 'white' or null.

  And when Get-VMHost will return no host, and you are trying to access. Count on $objHosts, you effectively type '$null. "Count", since $objHosts - eq $null at that time.

  Two ways to handle these cases would be to use the Measure-Object cmdlet or explicitly to a table, even if zero or one VMHosts are returned.  As:

  ## using Measure-Object$objHosts = Get-VMHost -Location $objcluster($objHosts | Measure-Object).Count    ## correctly returns 0 or 1 (or greater)...## or## forcing an array, even if 0 or 1 items returned$objHosts = @(Get-VMHost -Location $objcluster)$objHosts.Count        ## correctly returns 0 or 1 (or greater)...
  

  Regarding the behavior you're seeing with the statement Foreach-Object with $objVMs, I suspect that the behavior of the Foreach-Object statement when you're running an empyt null him is at stake here.  In other words, while you can imagine "$arrEmptyArray | % {'Hello'}' to produce anything, happening actually by an interation of the loop (really - try - the).  So to avoid this, you can delete the unnecessary part that stores the output of Get - VM in the variable "$objVMs" and combine the lines to channel the output from Get - VM directly to the Foreach-Object statement, as:

  Get-VM -Location $objCluster | %{    $intNumVMCpus += $_.NumCpu    $intTotVMMemMB += $_.MemoryMB    $intTotVMProvisionedSpaceGB += $_.ProvisionedSpaceGB    $intTotVMUsedSpaceGB += $_.usedSpaceGB}
  

  By the way: while we're updating this code a little, another way that you could get these totals is again using the Measure-Object cmdlet, this time with the parameter - sum, as:

  Get-VM -Location $objCluster | Measure-Object -Sum -Property NumCpu, MemoryMB, ProvisionedSpaceGB, usedSpaceGB
  

  Much more compact and allows just of PowerShell do the work.  Although you then maintain the return of the object of measures, depending on the situation, it is quite practical.

  How about that?

• Final result does not match the Master Page

  I'm so frustrated with Muse right now I could scream. I'm creating a simple landing page, a single page, where what little information it is (a graphic background, logo and contact information) is the master. I want to just publish a page that is exactly like the master, but this does not seem possible with Muse. Why is this? What Miss me? If you open the master page and go where the text breaks for mobile display, there is a blue graph that I placed at the bottom to fill in the blanks. Has gone in the final result and the page is excessive in length, I can't change in any way. The master is set to vertical 956px, but the last page is at 1080. There is nothing hidden anywhere on the page or master.

  A zipped file of the site can be found here: Dropbox - AYIN Website.zip

  I would be very grateful for any help anyone could give me, thanks in advance.

  MP

  Hi David,

  Thanks a lot for your answer. However, after consideration and discussion with my client, I think I'll try to rebuild the page from scratch, since it's so simple, see how it works first. I'll get in touch if I'm still having the same problem.

  Kind regards

  MP

• HP 1800 does not reflect the memory of 16 gb Micro SDHC

  I just add a card Lexar 16 GB Micro SDHC for my new HP 7 1800 but don't see any increase in available memory.
  
  Is that what the SDHC-compatible HP 7 1800?
  
  The instructions that I found do not mention using the Micro SD slot. Not even the way to remove the card.
  
  Anyone using a MicroSDHC card in their HP 7 1800?
  
  Thank you
  
  Jerry

  Ok. I found that the card works. Apparently the HP 7 1800 had only 5.56 GB g available plus 14.91 GB the card. I thought that the 1800 came with 32 GB GB 5.56 available does not seem like a lot.
  
  Also understand that the map is spring-loaded and pushing on it releases it.
  
  Jerry

• Satellite M60 - 104 - memory card reader does not read the MemoryStick pro duo

  Hi guys,.

  built in card reader on my laptop does not recognize/read stick memory Sony pro duo - is this normal or not?
  I know it must read MemoryStick pro, but not sure about pro duo.

  Can you help me please?

  Hello

  > the built in card reader on my laptop does not recognize/read stick memory Sony pro duo - is this normal or not?

  Of course, this could be a normal behavior as not all cards are compatible and taken in charge.
  I would recommend look in the user manual because you can find there information cards can be used in the portable card reader!

• Publication of RoboHElp Server 9 with RH 9 does not update the webhelp pro toolbar

  Hello

  We have a problem with RH9 a RH9 Project Server edition.

  When we opened the file published from this URL:

  http://ntrobohlpd02:8080/Robohelp Server? PRJ = Tests_2_Entreprise_FR

  The toolbar (where the table of contents, indexes etc. icons are displayed) comes from another project:

  

  The toolbar that should display is this (large green and grey icons):

  

  Why the server displays the whkin_tbars.htm of another project?

  Really weird.

  We tried to restart the server as indicated by Adobe technical support when I contacted them. It worked once, but do we need to restart the server whenever we want to publish?

  Thank you

  Probably the same does not if you view the generated location assistance. What happens if you start using the server or the administrator of the Web?

  I always suggest people manually remove all the files in the location of the server domain before they publish their results. The publishing process is unlike the process to generate. This is actually just a copy a leaves all kind of junk files behind the previous publication. By posting to a 'clean' place, you know that the content is good.

  Alternatively, you can delete the cache of your browser. This has been known to cause confusion by displaying a cached file (and so old). Let us know how you go.

• Why after effects CC interface does not support the Macbook Pro 15 retina?

  Hello to all the boys,

  I'm tired of getting the answer to this question, in these Images, you see bad or incomplete pixles in the after effects Interface:

  

  But in illustrator CC, CC of Photoshop, etc supporting well (you can see the deference between Ae and I)

  

  I wait your help please...

  Best regards

  Abduls

  We don't have not updated the user interface After Effects for the HiDPI monitors yet. We have updated the content for the HiDPI monitors viewers, however, since it is by far the most important part.

  Details are here:

  ml http://blogs.adobe.com/AfterEffects/2013/09/After-Effects-CC-12-1-Whats-New-and-changed.HT

• New clip sequence does not apply the compressor Pro of Res...

  I wanted to test first to see if she could handle the Pro Res videos (who, after some initial research, I read that it is possible). So to see for myself, I imported a video Pro Res 422, the clip click right and choose 'new sequence of the Clip... But it seems not to apply the compressor Pro Res 422...

  The video is originally HDV and I converted to the compressor to 422...

  I know it is perhaps unnecessary to convert HDV to Pro Res (to not mention that the HD clips weigh 45 MB and convert 205 MB, although the res pro FCP is less tax on the system as opposed to HDV, not sure if it's the same with first)... But I will receive pro res files soon, and I want to make sure that they work properly in first.

  Thank you

  

  /]

  Also, I'm not sure what you expected.

  If you want detail using ProRes in Premiere Pro, see the following articles:

  'ProRes end to end workflow.

  «ProRes Workflow in Premiere Pro: Advanced options»

• When I have my browser "zoom in", it does not hold the zoom of the following view and I have to "re-zoom, he used to stay at a zoom level, ideas chosen?

  I used when I zoomed view using wheel Ctrl and mouse the next page would be at the sam zoom elevel. Now, I have to re-zoom whenever I open a page.

  The function Zoom of Page Firefox does a level of field by field to save favorite settings level users zoom, there is no default Page Zoom level setting in Firefox.

  Try the extension Default FullZoom Level:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/6965

  Or the NoSquint extension:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/2592/

• Scroll position does not reset the master/detail

  (I posted this in another section, but I thought I should post it here too).

  I work with master/detail and I have the following problem:

  When I scroll to the bottom of a retail box, and then click another item in the main column, it shows the bottom of the new retail area.  This is not what I want.  When I click on an item in the main column, I want to see the top of the new retail area.  How can I get there?

  Help, please!  Thank you!

  SC

  I would like to add a for the link instead of a javascript onclick event: funtion. I noticed that in my first answer, but let him slip so far there

  So, instead of this:

  
  
  
  
        
  {category}
      
      
        
  {content}
      
  

  Try this:

  
  
  
  
        
  {category}
      
      
        
  {content}
      
  

  OR try this: (removal of the function of the head and placing him in an event onclick for the link.)

  
  
  
  
        
  ; return false">{category}
      
      
        
  {content}
      
  
  
  

• Designation does not reflect the changes in the chain

  I have a situation where I have a couple of ArrayCollections and a string inside my template class (all are static public). I use the API of reflection AS to display all of the variables available in the model to the user and to choose one of them. Everything that the user selects is given to a custom with a Set accessor function component.

  If the user selects collection ArrayCollection, the custom component assigned as dataProvider of a chart inside controls. However, if the user selects the string variable, the component affects its value to a text of the label inside. Later, if I change the values in the ArrayCollection collection externally, the changes are reflected in the chart, but if I change the value of the string variable (external), the label is not displayed changes. How can I get through it?

  Here are the two sections of the custom component:

  /////////////////////////////////////////////////////////////////////////////////

  var puiblic : The object of the supplier;

  public function put dataElement(newData:Object):Sub

  {

  var dataName:String = newData as Chain;

  var type: Type = Type.forClass (Model.ModelLocator);

  var field: field = type.getField (dataName);

  ce .provider = field.getValue ();

  }

  ///////////////////////////////////////////////////////////////////////////////

  and later I do (in the same custom component)

  ////////////////////////////////////////////////////////////////////////////////

  var lbl:Label = new Dim;

  lbl. Data = this.provider as String;

  //////////////////////////////////////////////////////////////////////////////

  OK, so the problem comes from the fact that a static property cannot be thought binded MXML (text = "{ModelLocator.stringName}" ") and not thinking AS3 using ChangeWatcher or BindingUtils.

  Your ModelLocator class, isn't supposed to be a singleton? That would solve your problem.

  Otherwise, you will need to manually manage changes on your static property, and honestly I don't know how to do this...

• Exported PDF does not reflect the most recent changes to my inDesign document

  When I export a new PDF from inDesign after that I have brought several changes to the PDF document looks like a previous version of my inDesign doc before changes

  Delete the old PDF normally, empty the trash and export again. It happened several times that InDesign cannot replace an existing PDF, but has not claimed a mistake last week. After you delete the old file, the problem has been resolved.

• 5001: the name of the package does not reflect the location of this file.

  I recently published a FLA with success.  I tested the movie and everything went perfectly.  I came back two days later and opened the fla, re-tested the film and I got this message. I was not delete, move, or rename what that, between now and the last time it worked.  All the .as files are exactly where they are first.

  If, instead of virtualzoo, you saw VirtualZoo (or your document class is zoo.virtualzoo instead of zoo. VirtualZoo) that correspond to the default class created by flash because you didn't not create one (at the expected location).